The event is racy: it will not appear in the output if bitmap is
migrated during downtime period of migration and postcopy phase is not
started.
Fixes: ae00aa2398 "iotests: 194: test also migration of dirty bitmap"
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230607143606.1557395-1-vsementsov@yandex-team.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Test that even vectored IO requests with 1024 vector elements that are
not aligned to the device's request alignment will succeed.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230411173418.19549-5-hreitz@redhat.com>
Rather than open-coding two different ways to check for an unwanted
negative sign, reuse the same code in both functions. That way, if we
decide down the road to accept "-0" instead of rejecting it, we have
fewer places to change. Also, it means we now get ERANGE instead of
EINVAL for negative values in qemu_strtosz, which is reasonable for
what it represents. This in turn changes the expected output of a
couple of iotests.
The change is not quite complete: negative fractional scaled values
can trip us up. This will be fixed in a later patch addressing other
issues with fractional scaled values.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-18-eblake@redhat.com>
In the past, commit a231cb27 ("iotests: Fix 104 for NBD", v2.3.0)
added an additional filter to _filter_img_info to rewrite NBD URIs
into the expected output form. This recently broke when we tweaked
tests to run in a per-format directory, which did not match the regex,
because _img_info itself is now already changing
SOCK_DIR=/tmp/tmpphjfbphd/raw-nbd-104 into
/tmp/tmpphjfbphd/IMGFMT-nbd-104 prior to _img_info_filter getting a
chance to further filter things.
While diagnosing the problem, I also noticed some filter lines
rendered completely useless by a typo when we switched from TCP to
Unix sockets for NBD (in shell, '\\+' is different from "\\+" (one
gives two backslash to the regex, matching the literal 2-byte sequence
<\+> after a single digit; the other gives one backslash to the regex,
as the metacharacter \+ to match one or more of <[0-9]>); since the
literal string <nbd://127.0.0.1:0\+> is not a valid URI, that regex
hasn't been matching anything for years so it is fine to just drop it
rather than fix the typo.
Fixes: f3923a72 ("iotests: Switch nbd tests to use Unix rather than TCP", v4.2.0)
Fixes: 5ba7db09 ("iotests: always use a unique sub-directory per test", v8.0.0)
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230519150216.2599189-1-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If blockdev-create references an existing node in an iothread (e.g. as
it's 'file' child), then suddenly all of the image creation code must
run in that AioContext, too. Test that this actually works.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230525124713.401149-13-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It has no internal callers, so its only use is being called from
individual test cases. If the name starts with an underscore, it is
considered private and linters warn against calling it. 256 only gets
away with it currently because it's on the exception list for linters.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230525124713.401149-12-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Clean up monitor_event to just use monitor_suspend/monitor_resume,
using mon->mux_out to protect against incorrect nesting (especially
on startup).
The only remaining case of reading suspend_cnt is in the can_read
callback, which is just advisory and can use qatomic_read.
As an extra benefit, mux_out is now simply protected by mon_lock.
Also, moving the prompt to the beginning of the main loop removes
it from the output in some error cases where QEMU does not actually
start successfully. It is not a full fix and it would be nice to
also remove the monitor heading, but this is already a small (though
unintentional) improvement.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Enable the "bios bits" avocado test in the gitlab-CI
* Another minor fix for the redundancy DMA blocker code
-----BEGIN PGP SIGNATURE-----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=m1Px
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-05-22' of https://gitlab.com/thuth/qemu into staging
* First batch of fixes to allow "make check" with "--without-default-devices"
* Enable the "bios bits" avocado test in the gitlab-CI
* Another minor fix for the redundancy DMA blocker code
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmRrVhoRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbUaiRAApPVveet6WPQ7Ag1448LtqHTGiwl8x2Ba
# jQ7FTKhqdTC5O+/BU7IQkvGmErPxCc8WPB7eoowwBVA/4dr8YIIBLKqO4RtP6LXs
# rtUkzsPI9ExW+iJjIMVOmHsp/shlRhuf+Tmlr8OsTObecCeA4Vbxc+RlvYXfCPhM
# 8tOuLO8n6LQY/62fgXSzI5WlLQSzIo3aDSmCeWa1QHkPLf6itvGkwsNBytMJLoUT
# pXZnBNqlXiuyPtloLp+DMfRRkpq8AHB04+Sri7TVPxi7bJL28RMZiaAXpvHSFLz8
# JR2ApRrzBthiLMK1I6A0c2ZGCbVOAi1dhNDNqWCyx8ZBASEJj0XuT/+Qse81sKmG
# zNXr57x0CzWAJ59/taBM2hjUks10rJOmxHJYxS6i1JJR7u1zTuvii7toPMmf35zX
# bM7TYjKpYGa2HneHpw1eOjpTgUYZpgla/pVXZhKqoGdfmseBMlFU424MNl/xDRng
# bxuam3Ku+ClOeQlzXt8aceL/gTApJfvy5FAIAK5yUOQDTs6HjJJL2AfcOzss8kXb
# k6IMHgV1tnLed8B7K4iml2rzvk+RT3CPGvmaNwSAkdh8SnE5/bv1I6s4fHiXMlvC
# mmfvFSoWwdhcsD5r+XOFxfke8sGrOeQIXKefp6UL3hYVV7o2NUe89BytXZCzut/Y
# 6ulR25HHtmI=
# =m1Px
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 22 May 2023 04:46:34 AM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-05-22' of https://gitlab.com/thuth/qemu:
memory: stricter checks prior to unsetting engaged_in_io
acpi/tests/avocado/bits: enable bios bits avocado tests on gitlab CI pipeline
.gitlab-ci.d/buildtest.yml: Run full "make check" with --without-default-devices
tests/qemu-iotests/172: Run QEMU with -vga none and -nic none
tests/qtest/meson.build: Run the net filter tests only with default devices
tests/qtest: Check for the availability of virtio-ccw devices before using them
tests/qtest/virtio-ccw-test: Remove superfluous tests
tests/qtest/cdrom-test: Fix the test to also work without optional devices
tests/qtest/usb-hcd-uhci-test: Skip test if UHCI controller is not available
tests/qtest/readconfig-test: Check for the availability of USB controllers
hw/sparc64/sun4u: Use MachineClass->default_nic and MachineClass->no_parallel
hw/i386: Ignore the default parallel port if it has not been compiled into QEMU
hw/char/parallel: Move TYPE_ISA_PARALLEL to the header file
hw/sh4: Use MachineClass->default_nic in the sh4 r2d machine
hw/s390x: Use MachineClass->default_nic in the s390x machine
hw/ppc: Use MachineClass->default_nic in the ppc machines
softmmu/vl.c: Disable default NIC if it has not been compiled into the binary
hw: Move the default NIC machine class setting from the x86 to the generic one
softmmu/vl.c: Check for the availability of the VGA device before using it
hw/i386/Kconfig: ISAPC works fine without VGA_ISA
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This way QEMU won't complain in case the VGA card or the NIC device
are not available in the binary, thus it won't spoil the output
and the test then passes with such QEMU binaries that have a limited
configuration, too.
Message-Id: <20230512124033.502654-18-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This tests exercises graph locking, draining, and graph modifications
with AioContext switches a lot. Amongst others, it serves as a
regression test for bdrv_graph_wrlock() deadlocking because it is called
with a locked AioContext and for AioContext handling in the NBD server.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230517152834.277483-4-kwolf@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Skip TestBlockdevReopen.test_insert_compress_filter() if the 'compress'
driver isn't available.
In order to make the test succeed when the case is skipped, we also need
to remove any output from it (which would be missing in the case where
we skip it). This is done by replacing qemu_io_log() with qemu_io(). In
case of failure, qemu_io() raises an exception with the output of the
qemu-io binary in its message, so we don't actually lose anything.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230511143801.255021-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Taking account of the new zone append write operation for zoned devices,
BLOCK_ACCT_ZONE_APPEND enum is introduced as other I/O request type (read,
write, flush).
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20230508051916.178322-3-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The patch tests zone append writes by reporting the zone wp after
the completion of the call. "zap -p" option can print the sector
offset value after completion, which should be the start sector
where the append write begins.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508051510.177850-4-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The new block layer APIs of zoned block devices can be tested by:
$ tests/qemu-iotests/check zoned
Run each zone operation on a newly created null_blk device
and see whether it outputs the same zone information.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-7-faithilikerun@gmail.com
Message-id: 20230324090605.28361-7-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This tests that trying to resize an image with QMP block_resize doesn't
hang or otherwise fail when the image is attached to a device running in
an iothread.
This is a regression test for the recent fix that changed
qmp_block_resize, which is a coroutine based QMP handler, to avoid
calling no_coroutine_fns directly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230509134133.373408-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Socket paths need to be short to avoid failures. This is why there is a
iotests.sock_dir (defaulting to /tmp) separate from the disk image base
directory.
Make use of it to fix failures in too deeply nested test directories.
Fixes: ab7f7e67a7
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230503165019.8867-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'check' script will use "#!/usr/bin/env python3" by default
to locate python, but this doesn't work in distros which lack a
bare 'python3' binary like NetBSD.
We need to explicitly invoke 'check' by referring to the 'python'
variable in meson, which resolves to the detected python binary
that QEMU intends to use.
This fixes a regression introduced by
commit 51ab5f8bd7
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Mar 15 17:43:23 2023 +0000
iotests: register each I/O test separately with meson
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230329124539.822022-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230403134920.2132362-9-alex.bennee@linaro.org>
Currently meson registers a single test that invokes an entire group of
I/O tests, hiding the test granularity from meson. There are various
downsides of doing this
* You cannot ask 'meson test' to invoke a single I/O test
* The meson test timeout can't be applied to the individual
tests
* Meson only gets a pass/fail for the overall I/O test group
not individual tests
* If a CI job gets killed by the GitLab timeout, we don't
get visibility into how far through the I/O tests
execution got.
This switches meson to perform test discovery by invoking 'check' in
dry-run mode. It then registers one meson test case for each I/O
test. Parallel execution remains disabled since the I/O tests do not
use self contained execution environments and thus conflict with
each other.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-8-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-25-alex.bennee@linaro.org>
The current test runner is only safe against parallel execution within
a single instance of the 'check' process, and only if -j is given a
value greater than 2. This prevents running multiple copies of the
'check' process for different test scenarios.
This change switches the output / socket directories to always include
the test name, image format and image protocol. This should allow full
parallelism of all distinct test scenarios. eg running both qcow2 and
raw tests at the same time, or both file and nbd tests at the same
time.
It would be possible to allow for parallelism of the same test scenario
by including the pid, but that would potentially let many directories
accumulate over time on failures, so is not done.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-7-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-24-alex.bennee@linaro.org>
Currently the tests have their stdin inherited from the test harness,
meaning they are connected to a TTY. The QEMU processes spawned by
certain tests, however, modify TTY settings and if the test exits
abnormally the settings might not be restored.
The python test harness thus has some logic which will capture the
initial TTY settings and restore them once all tests are finished.
This does not, however, take into account the possibility of many
copies of the 'check' program running in parallel. With parallel
execution, a later invokation may save the TTY state that QEMU has
already modified, and thus restore bad state leaving the TTY
non-functional.
None of the I/O tests shnould actually be interactive requiring
user input and so they should not require a TTY at all. To avoid
this while TTY save/restore complexity we can connect the test
stdin to /dev/null instead.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-6-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-23-alex.bennee@linaro.org>
Recently meson started complaining that TAP test reports don't include
the TAP protocol version. While this warning is bogus and has since been
removed from Meson, it looks like good practice to include this header
going forward. The GLib library test harness has started unconditionally
printing the version, so this brings the I/O tests into line.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-5-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-22-alex.bennee@linaro.org>
When asking 'check' to list individual tests by invoking it in dry run
mode, it prints the paths to the tests relative to the base of the
I/O test directory.
When asking 'check' to run an individual test, however, it mandates that
only the unqualified test name is given, without any path prefix. This
inconsistency makes it harder to ask for a list of tests and then invoke
each one.
Thus the test listing code is change to flatten the test names, by
printing only the base name, which can be directly invoked.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-4-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-21-alex.bennee@linaro.org>
The 'check' script can be invoked in "dry run" mode, in which case it
merely does test discovery and prints out all their names. Despite only
doing test discovery it still validates that the various QEMU binaries
can be found. This makes it impossible todo test discovery prior to
building QEMU. This is a desirable feature to support, because it will
let meson discover tests.
Fortunately the code in the TestEnv constructor is ordered in a way
that makes this fairly trivial to achieve. We can just short circuit
the constructor after the basic directory paths have been set.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-3-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-20-alex.bennee@linaro.org>
The 'check' script has some rather dubious logic whereby it assumes
that if invoked as a symlink, then it is running from a separate
source tree and build tree, otherwise it assumes the current working
directory is a combined source and build tree.
This doesn't work if you want to invoke the 'check' script using
its full source tree path while still using a split source and build
tree layout. This would be a typical situation with meson if you ask
it to find the 'check' script path using files('check').
Rather than trying to make the logic more magical, add support for
explicitly passing the dirs using --source-dir and --build-dir. If
either is omitted the current logic is maintained.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-2-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-19-alex.bennee@linaro.org>
Try writing zeroes to a FUSE export while allowing the area to be
unmapped; block/file-posix.c generally implements writing zeroes with
BDRV_REQ_MAY_UNMAP ('write -zu') by calling fallocate(PUNCH_HOLE). This
used to lead to a blk_pdiscard() in the FUSE export, which may or may
not lead to the area being zeroed. HEAD^ fixed this to use
blk_pwrite_zeroes() instead (again with BDRV_REQ_MAY_UNMAP), so verify
that running `qemu-io 'write -zu'` on a FUSE exports always results in
zeroes being written.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230227104725.33511-3-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The Free Software Foundation moved to a new address and some
sources in QEMU referred to their old location.
The address should be updated and replaced by a pointer to
<https://www.gnu.org/licenses/>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/379
Signed-off-by: Khadija Kamran <kkamran.bese16seecs@seecs.edu.pk>
Message-Id: <576ee9203fdac99d7251a98faa66b9ce1e7febc5.1675941486.git.kkamran.bese16seecs@seecs.edu.pk>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Pylint 2.16 adds a few new checks that cause the optional check-tox CI
job to fail.
1. The superfluous-parens check seems to be a bit more aggressive,
2. broad-exception-raised is new; it discourages "raise Exception".
Fix these minor issues and turn the lights green.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20230210003147.1309376-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Check that virtio-scsi-pci is present in the QEMU build before running
the tests.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230208194700.11035-12-farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This regression test demonstrates that detect-zeroes works with
registered buffers. Bug details:
https://gitlab.com/qemu-project/qemu/-/issues/1404
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230207203719.242926-5-stefanha@redhat.com>
Currently, when querying a qcow2 image, qemu-img info reports something
like this:
image: test.qcow2
file format: qcow2
virtual size: 64 MiB (67108864 bytes)
disk size: 196 KiB
cluster_size: 65536
Format specific information:
compat: 1.1
compression type: zlib
lazy refcounts: false
refcount bits: 16
corrupt: false
extended l2: false
Child node '/file':
image: test.qcow2
file format: file
virtual size: 192 KiB (197120 bytes)
disk size: 196 KiB
Format specific information:
extent size hint: 1048576
Notably, the way the keys are named is specific for image files: The
filename is shown under "image", the BDS driver under "file format", and
the BDS length under "virtual size". This does not make much sense for
nodes that are not actually supposed to be guest images, like the /file
child node shown above.
Give bdrv_node_info_dump() a @protocol parameter that gives a hint that
the respective node is probably just used for data storage and does not
necessarily present the data for a VM guest disk. This renames the keys
so that with this patch, the output becomes:
image: test.qcow2
[...]
Child node '/file':
filename: test.qcow2
protocol type: file
file length: 192 KiB (197120 bytes)
disk size: 196 KiB
Format specific information:
extent size hint: 1048576
(Perhaps we should also rename "Format specific information", but I
could not come up with anything better that will not become problematic
if we guess wrong with the protocol "heuristic".)
This change affects iotest 302, which has protocol node information in
its reference output.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220620162704.80987-13-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For every node in the backing chain, collect its BlockGraphInfo struct
using bdrv_query_block_graph_info(). Print all nodes' information,
indenting child nodes and labelling them with a path constructed from
the child names leading to the node from the root (e.g. /file/file).
Note that we open each image with BDRV_O_NO_BACKING, so its backing
child is omitted from this graph, and thus presented in the previous
manner: By simply concatenating all images' information, separated with
blank lines.
This affects two iotests:
- 065: Here we try to get the format node's format specific information.
The pre-patch code does so by taking all lines from "Format specific
information:" until an empty line. This format specific information
is no longer followed by an empty line, though, but by child node
information, so limit the range by "Child node '/file':".
- 302: Calls qemu_img() for qemu-img info directly, which does not
filter the output, so the child node information ends up in the
output.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220620162704.80987-12-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These tests read size information (sometimes disk size, sometimes
virtual size) from qemu-img info's output. Once qemu-img starts
printing info about child nodes, we are going to see multiple instances
of that per image, but these tests are only interested in the first one,
so use "head -n 1" to get it.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220620162704.80987-11-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before we let qemu-img info print child node information, have
common.filter, common.rc, and iotests.py filter it from the test output
so we get as few reference output changes as possible.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220620162704.80987-10-hreitz@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests that when an error happens while writing back bitmaps to the
image file in qcow2_inactivate(), 'qemu-img bitmap/commit' actually
return an error value in their exit code instead of making the operation
look successful to scripts.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230112191454.169353-5-kwolf@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In downstream RHEL builds, we do not have "blkverify" enabled, so
iotest 262 is currently failing there. Thus let's list "blkverify"
as required item so that the test properly gets skipped instead if
"blkverify" is missing.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230104112850.261480-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
"quorum" is required by iotest 312 - if it is not compiled into the
QEMU binary, the test fails. Thus list "quorum" as required driver
so that the test gets skipped in case it is not available.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230104114601.269351-1-thuth@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Without a kernel or boot disk a QEMU on s390 will exit (usually with a
disabled wait state). This breaks the stream-under-throttle test case.
Do not exit qemu if on s390.
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-Id: <20221207131452.8455-1-borntraeger@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Test streaming a base image into the top image underneath two throttle
nodes. This was reported to make qemu 7.1 hang
(https://gitlab.com/qemu-project/qemu/-/issues/1215), so this serves as
a regression test.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221110160921.33158-1-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Have write requests happen to the source node right when we start a
mirror job. The mirror filter node may encounter MirrorBDSOpaque.job
being NULL, but this should not cause a segfault.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221109165452.67927-6-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before this series, a mirror job in write-blocking mode would pause
issuing background requests while active requests are in flight. Thus,
if the source is constantly in use by active requests, no actual
progress can be made.
This series should have fixed that, making the mirror job issue
background requests even while active requests are in flight.
Have a new test case in 151 verify this.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221109165452.67927-5-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
At present there are two callers of get_tmp_filename() and they are
inconsistent.
One does:
/* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
char *tmp_filename = g_malloc0(PATH_MAX + 1);
...
ret = get_tmp_filename(tmp_filename, PATH_MAX + 1);
while the other does:
s->qcow_filename = g_malloc(PATH_MAX);
ret = get_tmp_filename(s->qcow_filename, PATH_MAX);
As we can see different 'size' arguments are passed. There are also
platform specific implementations inside the function, and the use
of snprintf is really undesirable.
The function name is also misleading. It creates a temporary file,
not just a filename.
Refactor this routine by changing its name and signature to:
char *create_tmp_file(Error **errp)
and use g_get_tmp_dir() / g_mkstemp() for a consistent implementation.
While we are here, add some comments to mention that /var/tmp is
preferred over /tmp on non-win32 hosts.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20221010040432.3380478-2-bin.meng@windriver.com>
[kwolf: Fixed incorrect errno negation and iotest 051]
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new test to see what happens when you migrate a VM with a backing
chain that has json:{} backing file strings, which, when opened, will be
resolved to plain filenames.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220803144446.20723-4-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 5f76a7aac1 is looking harmless from
the first glance, but it has changed things a lot. 'libvirt' uses it to
detect that it should follow new initialization way and this changes
things considerably. With this procedure followed, blockdev_init() is
not called anymore and thus block_acct_setup() helper is not called.
This means in particular that defaults for block accounting statistics
are changed and account_invalid/account_failed are actually initialized
as false instead of true originally.
This commit changes things to match original world. There are the following
constraints:
* new default value in block_acct_init() is set to true
* block_acct_setup() inside blockdev_init() is called before
blkconf_apply_backend_options()
* thus newly created option in block device properties has precedence if
specified
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
CC: Peter Krempa <pkrempa@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220824095044.166009-3-den@openvz.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is possible to hit the assertTrue(delta_t < 2.0) on very loaded
systems. Increase the value to 5.0 to ease the situation a little bit.
Message-Id: <20220802123101.430757-1-thuth@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qemu-iotests fails in the following setup:
./configure --enable-modules --enable-smartcard \
--target-list=x86_64-softmmu,s390x-softmmu
make
cd build
QEMU_PROG=`pwd`/s390x-softmmu/qemu-system-s390x \
../tests/check-block.sh qcow2
...
--- /home/crobinso/src/qemu/tests/qemu-iotests/127.out
+++ /home/crobinso/src/qemu/build/tests/qemu-iotests/scratch/127.out.bad
@@ -1,4 +1,18 @@
QA output created by 127
+Failed to open module: /home/crobinso/src/qemu/build/hw-usb-smartcard.so: undefined symbol: ccid_card_ccid_attach
...
--- /home/crobinso/src/qemu/tests/qemu-iotests/267.out
+++ /home/crobinso/src/qemu/build/tests/qemu-iotests/scratch/267.out.bad
@@ -1,4 +1,11 @@
QA output created by 267
+Failed to open module: /home/crobinso/src/qemu/build/hw-usb-smartcard.so: undefined symbol: ccid_card_ccid_attach
The stderr spew is its own known issue, but seems like iotests should
be discarding stderr in this case.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test an allocating write to a parallels image that has a backing node.
Before HEAD^, doing so used to give me a failed assertion (when the
backing node contains only `42` bytes; the results varies with the value
chosen, for `0` bytes, for example, all I get is EIO).
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220714132801.72464-3-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
e7874a50ff ("python: update for mypy 0.950") has added
`warn_unused_ignores = False` to python/setup.cfg, to be able to keep
compatibility with both pre- and post-0.950 mypy versions.
The iotests' mypy.ini needs the same, or 297 will fail (on both pre- and
post-0.950 mypy, as far as I can tell; just for different `ignore`
lines).
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220621092536.19837-1-hreitz@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
