Create and record the rt signal trampoline.
Reviewed-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-18-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Create and record the two signal trampolines.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-16-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The return value is constant 0, and unused as well -- change to void.
Drop inline marker. Change tramp type to uint32_t* for clarity.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-15-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Create and record the rt signal trampoline.
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-14-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Create and record the two signal trampolines.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-13-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This has been a fixme for some time. The effect of
returning -EFAULT from the kernel code is to raise SIGSEGV.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-12-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Create and record the two signal trampolines.
Use them when the guest does not use SA_RESTORER.
Note that x86_64 does not use this code.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We cannot use a raw sigtramp page for hppa,
but must wait for full vdso support.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Continue to initialize the words on the stack, as documented.
However, use the off-stack trampoline.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-9-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Split out setup_sigreturn so that we can continue to
initialize the words on the stack, as documented.
However, use the off-stack trampoline.
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Create and record the two signal trampolines.
Use them when the guest does not use ka_restorer.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Mirror what the kernel does in arch/arm/kernel/signal.h,
using the old sigframe struct in the rt sigframe struct.
Update the trampoline code to match the kernel: this uses
sp-relative accesses rather than pc-relative.
Copy the code into frame->retcode from the trampoline page.
This minimises the different cases wrt arm vs thumb vs fdpic.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210929130553.121567-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since we no longer support "v1", there's no need to distinguish "v2".
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Version 2 signal frames are used from 2.6.12 and since cbc14e6f28,
we have set UNAME_MINIMUM_RELEASE to 2.6.32.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Create and record the rt signal trampoline.
Use it when the guest does not use SA_RESTORER.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Allocate a page to hold the signal trampoline(s).
Invoke a guest-specific hook to fill in the contents
of the page before marking it read-execute again.
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new force_sig_fault() function instead of setting up
a target_siginfo_t and calling queue_signal().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210813131809.28655-8-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new force_sig_fault() function instead of setting up
a target_siginfo_t and calling queue_signal().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210813131809.28655-7-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In many places in the linux-user code we need to queue a signal for
the guest using the QEMU_SI_FAULT si_type. This requires that the
caller sets up and passes us a target_siginfo, including setting the
appropriate part of the _sifields union for the si_type. In a number
of places the code forgets to set the _sifields union field.
Provide a new force_sig_fault() function, which does the same thing
as the Linux kernel function of that name -- it takes the signal
number, the si_code value and the address to use in
_sifields._sigfault, and assembles the target_siginfo itself. This
makes the callsites simpler and means it's harder to forget to pass
in an address value.
We follow force_sig() and the kernel's force_sig_fault() in not
requiring the caller to pass in the CPU pointer but always acting
on the CPU of the current thread.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210813131809.28655-6-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The target_siginfo_t we populate in force_sig() will eventually
get copied onto the target's stack. Zero it out so that any extra
padding in the sifields union is consistently zero when the guest
sees it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210813131809.28655-5-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In the Arm target code, when the fpa11 emulation code tells us we
need to send the guest a SIGFPE, we do this with queue_signal(), but
we are using the wrong si_type, and we aren't setting the _sifields
union members corresponding to either the si_type we are using or the
si_type we should be using.
As the existing comment notes, the kernel code for this calls the old
send_sig() function to deliver the signal. This eventually results
in the kernel's signal handling code fabricating a siginfo_t with a
SI_KERNEL code and a zero pid and uid. For QEMU this means we need
to use QEMU_SI_KILL. We already have a function for that:
force_sig() sets up the whole target_siginfo_t the way we need it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210813131809.28655-4-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When generating a TRAP_BRKPT SIGTRAP, set the siginfo_t addr field
to the PC where the breakpoint/singlestep trap occurred; this is
what the kernel does for this signal for this architecture.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210813131809.28655-3-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When generating a TRAP_BRKPT SIGTRAP, set the siginfo_t addr field
to the PC where the breakpoint/singlestep trap occurred; this is
what the kernel does for this signal for this architecture.
Fixes: Coverity 1459154
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210813131809.28655-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In do_setsockopt(), the code path for the options which take a struct
ip_mreq_source (IP_BLOCK_SOURCE, IP_UNBLOCK_SOURCE,
IP_ADD_SOURCE_MEMBERSHIP and IP_DROP_SOURCE_MEMBERSHIP) fails to
check the return value from lock_user(). Handle this in the usual
way by returning -TARGET_EFAULT.
(In practice this was probably harmless because we'd pass a NULL
pointer to setsockopt() and the kernel would then return EFAULT.)
Fixes: Coverity CID 1459987
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210809155424.30968-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
cpu_get_pic_interrupt() is now unreachable from user-mode,
delete the unnecessary stubs.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-25-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Trim down the #includes in qemu.h where we can, either by
dropping unneeded headers or by moving them to user-internals.h.
This includes deleting a couple of #includes that appear at
weird points midway through the header file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-10-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Currently the linux-user qemu.h pulls in gdbstub.h. There's no real reason
why it should do this; include it directly from the C files which require
it, and drop the include line in qemu.h.
(Note that several of the C files previously relying on this indirect
include were going out of their way to only include gdbstub.h conditionally
on not CONFIG_USER_ONLY!)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-9-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
qemu.h is included in various non-linux-user files (which
mostly want the TaskState struct and the functions for
doing usermode access to guest addresses like lock_user(),
unlock_user(), get_user*(), etc).
Split out the parts that are only used in linux-user itself
into a new user-internals.h. This leaves qemu.h with basically
three things:
* the definition of the TaskState struct
* the user-access functions and macros
* do_brk()
all of which are needed by code outside linux-user that
includes qemu.h.
The addition of all the extra #include lines was done with
sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user)
(and then undoing the change to fpa11.h).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Split the safe-syscall macro from qemu.h into a new safe-syscall.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-7-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Split out the mmap prototypes into a new header user-mmap.h
which we only include where required.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-6-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Split guest-binary loader prototypes out into a new header
loader.h which we include only where required.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-5-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Split the signal related prototypes into the existing header file
signal-common.h, and include it in those places that now require it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-4-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The functions implemented in strace.c are only used in a few files in
linux-user; split them out of qemu.h and into a new strace.h header
which we include in the places that need it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-3-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We're about to move a lot of the code in qemu.h out into different
header files; fix the coding style nits first so that checkpatch
is happy with the pure code-movement patches. This is mostly
block-comment style but also a few whitespace issues.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Passing arguments to plugins had to be done through "arg=<argname>".
This is redundant and introduces confusion especially when the argument
has a name and value (e.g. `-plugin plugin_name,arg="argname=argvalue"`).
This allows passing plugin arguments directly e.g:
`-plugin plugin_name,argname=argvalue`
For now, passing arguments through "arg=" is still supports but outputs
a deprecation warning.
Also, this commit makes boolean arguments passed to plugins in the
`argname=on|off` form instead of the deprecated short-boolean form.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210730135817.17816-2-ma.mandourr@gmail.com>
Currently we rely on all the callsites of cpsr_write() to rebuild the
cached hflags if they change one of the CPSR bits which we use as a
TB flag and cache in hflags. This is a bit awkward when we want to
change the set of CPSR bits that we cache, because it means we need
to re-audit all the cpsr_write() callsites to see which flags they
are writing and whether they now need to rebuild the hflags.
Switch instead to making cpsr_write() call arm_rebuild_hflags()
itself if one of the bits being changed is a cached bit.
We don't do the rebuild for the CPSRWriteRaw write type, because that
kind of write is generally doing something special anyway. For the
CPSRWriteRaw callsites in the KVM code and inbound migration we
definitely don't want to recalculate the hflags; the callsites in
boot.c and arm-powerctl.c have to do a rebuild-hflags call themselves
anyway because of other CPU state changes they make.
This allows us to drop explicit arm_rebuild_hflags() calls in a
couple of places where the only reason we needed to call it was the
CPSR write.
This fixes a bug where we were incorrectly failing to rebuild hflags
in the code path for a gdbstub write to CPSR, which meant that you
could make QEMU assert by breaking into a running guest, altering the
CPSR to change the value of, for example, CPSR.E, and then
continuing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210817201843.3829-1-peter.maydell@linaro.org
setup_rt_frame() passes siginfo and ucontext host addresses to guest
signal handlers, causing problems when e.g. emulating x86_64 on s390x.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210803171858.148394-1-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Currently when a compare-and-trap instruction is executed, qemu will
always raise a SIGILL signal. On real hardware, a SIGFPE is raised.
Change the PGM_DATA case in cpu_loop to follow the behavior in
linux kernel /arch/s390/kernel/traps.c.
* Only raise SIGILL if DXC == 0
* If DXC matches a non-simulated IEEE exception, raise SIGFPE with
correct si_code
* Raise SIGFPE with si_code == 0 for everything else
When applied on 20210705210434.45824-2-iii@linux.ibm.com, this fixes
crashes in the java jdk such as the linked bug.
Signed-off-by: Jonathan Albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Buglink: https://bugs.launchpad.net/qemu/+bug/1920913
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/319
Message-Id: <20210709160459.4962-2-jonathan.albrecht@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For SIGILL, SIGFPE and SIGTRAP the PSW must point after the
instruction, and at the instruction for other signals. Currently under
qemu-user for SIGFILL and SIGFPE it points at the instruction.
Fix by advancing psw.addr for these signals.
Co-developed-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/319
Message-Id: <20210705210434.45824-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
From clang-13:
linux-user/syscall.c:8503:17: error: variable 'total_size' set but not used \
[-Werror,-Wunused-but-set-variable]
Acked-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In user-mode emulation there is a small race between preexit_cleanup
and exit_group() which means we may end up calling instrumented
instructions before the kernel reaps child threads. To solve this we
implement a new helper which ensures the callbacks are flushed along
with any translations before we let the host do it's a thing.
While we are at it make the documentation of
qemu_plugin_register_atexit_cb clearer as to what the user can expect.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Acked-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20210720232703.10650-21-alex.bennee@linaro.org>
Use it to avoid some clang-12 -Watomic-alignment errors,
forcing some structures to be aligned and as a pointer when
we have ensured that the address is aligned.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The mapping from file-descriptors to translator functions is not guarded
on realloc which may cause invalid function pointers to be read from a
previously deallocated mapping.
Signed-off-by: Owen Anderson <oanderso@google.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210701221255.107976-1-oanderso@google.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Now than target_to_host_errno() always return an errno, we can
remove the unused and arbitrary ERRNO_TABLE_SIZE definition.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210708170550.1846343-9-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Convert the host_to_target_errno_table[] array to a switch
case to allow compiler optimizations (such noticing the identity
function when host and guest errnos match). Extract the errnos
list as to a new includible unit, using a generic macro. Remove
the code related to target_to_host_errno_table[] initialization.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210708170550.1846343-8-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We want to access the target errno indepently of the rest of the
linux-user code. Move the header containing the generic errno
definitions ('errno_defs.h') to 'generic/target_errno_defs.h',
create a new 'target_errno_defs.h' in each target which itself
includes 'generic/target_errno_defs.h'.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210708170550.1846343-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We want to have one generic target_errno.h (API to access target
errno), and will add target errno definitions in target_errno_defs.h.
The sparc target already have its errnos in an header, simply rename
it.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210708170550.1846343-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We are going to move this code, fix its style first.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210704183755.655002-12-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We are going to move this code, fix its style first.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210704183755.655002-7-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Linux kernel defines EWOULDBLOCK as EAGAIN (since before v2.6.12-rc2).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210704183755.655002-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Linux kernel defines EWOULDBLOCK as EAGAIN (since before v2.6.12-rc2).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210704183755.655002-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Linux kernel defines EWOULDBLOCK as EAGAIN (since before v2.6.12-rc2).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210704183755.655002-2-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Set I, M, A, F, D and C bit for hwcap if misa is set.
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210706035015.122899-1-kito.cheng@sifive.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
At present, we're referencing env->psw.mask directly, which
fails to ensure that env->cc_op is incorporated or updated.
Use s390_cpu_{set_psw,get_psw_mask} to fix this.
Mirror the kernel's cleaning of the psw.mask in save_sigregs
and restore_sigregs. Ignore PSW_MASK_RI for now, as qemu does
not support that.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: jonathan.albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Tested-by: <ruixin.bao@ibm.com>
Message-Id: <20210615030744.1252385-6-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's check for S390_FEAT_VECTOR_ENH and set HWCAP_S390_VXRS_EXT
accordingly. Add all missing HWCAP defined in upstream Linux.
Cc: Laurent Vivier <laurent@vivier.eu>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-25-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
_sigev_un._tid is an internal glibc field and is not available on
musl libc. The sigevent(7) man page and Linux UAPI headers both use
sigev_notify_thread_id as a public way to access this field.
musl libc supports this field since 1.2.2[0], and glibc plans to
add support as well[1][2].
If sigev_notify_thread_id is not available, fall back to _sigev_un._tid
as before.
[0] http://git.musl-libc.org/cgit/musl/commit/?id=7c71792e87691451f2a6b76348e83ad1889f1dcb
[1] https://www.openwall.com/lists/musl/2019/08/01/5
[2] https://sourceware.org/bugzilla/show_bug.cgi?id=27417
Signed-off-by: Michael Forney <mforney@mforney.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210526035556.7931-1-mforney@mforney.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The _POSIX_C_SOURCE and _XOPEN_SOURCE macros are used by the
application to indicate to libc which declarations it should expose.
Since qemu does not define them anywhere, it does not make sense
to check their value.
Instead, since the intent is to determine whether the host struct
stat supports the st_*tim fields, use the configure test result
which does exactly that.
Signed-off-by: Michael Forney <mforney@mforney.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210526035531.7871-1-mforney@mforney.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
glibc 2.34 is now checking for this in hwcaps at
runtime [1] and failing to run the binary if machine
does not support 128bit IEEE fp
Fixes
Fatal glibc error: CPU lacks float128 support (POWER 9 or later required)
[1] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=d337345ce145e23c5f3a956f349d924fdf54ce2d;hp=eb24865637a271ab7dad13190330105eab0d478d
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210614191729.2981488-1-raj.khem@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This check is to ensure that the loop in signal_table_init() from
SIGRTMIN to SIGRTMAX falls within the bounds of host_to_target_signal_table
(_NSIG). However, it is not critical, since _NSIG is already defined
to be the one larger than the largest signal supported by the system
(as specified in the upcoming POSIX revision[0]).
musl libc does not define __SIGRTMAX, so disabling this check when
it is missing fixes one of the last remaining errors when building
qemu.
[0] https://www.austingroupbugs.net/view.php?id=741
Signed-off-by: Michael Forney <mforney@mforney.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210526190203.4255-1-mforney@mforney.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signal the translator to use host atomic instructions for
guest operations, insofar as it is possible. This is the
best we can do to allow the guest to interact atomically
with other processes.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/121
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210612060828.695332-1-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Instead of delaying tcg_region_init until after tcg_prologue_init
is complete, do tcg_region_init first and let tcg_prologue_init
shrink the first region by the size of the generated prologue.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use an enumeration instead of raw 32/64/80 values.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-12-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-92-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The translation of branch instructions always results in exit from
the TB. Remove the synthetic "exception" after no more uses.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210517205025.3777947-4-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Remove the synthetic "exception" after no more uses.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210517205025.3777947-3-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Provide the following definitions required by the common code:
* ELF_NREG: with the value of sizeof(s390_regs) / sizeof(long).
* target_elf_gregset_t: define it like all the other arches do.
* elf_core_copy_regs(): similar to kernel's s390_regs_get().
* USE_ELF_CORE_DUMP.
* ELF_EXEC_PAGESIZE.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20210413205608.22587-1-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The current code dumps the memory between arg_start and arg_end,
which contains the argv pointers. This results in the
Core was generated by `<garbage>`
message when opening the core file in GDB. This is because the code is
supposed to dump the actual arg strings. Fix by using arg_strings and
env_strings instead of arg_start and arg_end.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20210413205814.22821-1-iii@linux.ibm.com>
[lv: add missing braces]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Initialize variables instead of elses.
Use an else instead of a goto.
Add braces.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210422230227.314751-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
There's no longer a difference between the alpha code and
the generic code.
There is a type difference in target_old_sigaction.sa_flags,
which can be resolved with a very much smaller ifdef, which
allows us to finish sharing the target_sigaction definition.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210422230227.314751-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This means that we can share the TARGET_NR_rt_sigaction code,
and the target_rt_sigaction structure is unused. Untangling
the ifdefs so that target_sigaction can be shared will wait
until the next patch.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210422230227.314751-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Do not access a field that may not be present. This will
become an issue when sharing more code in the next patch.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210422230227.314751-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The value of ka_restorer needs to be saved in sigact_table.
At the moment, the attempt to save it in do_syscall is
improperly clobbering user memory.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210422230227.314751-4-richard.henderson@linaro.org>
[lv: remove tab]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use ka_restorer, in line with TARGET_ARCH_HAS_KA_RESTORER
vs TARGET_ARCH_HAS_SA_RESTORER, since Alpha passes this
field as a syscall argument.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210422230227.314751-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We incorrectly used the offset of the non-rt sigframe.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210422230227.314751-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The GDateTime APIs provided by GLib avoid portability pitfalls, such
as some platforms where 'struct timeval.tv_sec' field is still 'long'
instead of 'time_t'. When combined with automatic cleanup, GDateTime
often results in simpler code too.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210505103702.521457-7-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The implicit cast from abi_long to size_t may introduce an intermediate
unwanted sign-extension of the value for 32bit targets running on 64bit
hosts.
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210503174159.54302-3-thatlemon@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reorder the function bodies to correspond to the kernel source.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-15-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
At point of usage, it's not immediately obvious that
we don't need a loop to copy these arrays.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-14-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The original value of frame_addr is still required for
its use in the call to unlock_user_struct below.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-13-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In order to properly present these arguments, we need to add
code to target/s390x to record LowCore parameters for user-only.
But in the meantime, at least zero the missing last_break
argument, and fixup the comment style in the vicinity.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-12-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Note that PSW_ADDR_{64,32} are called PSW_MASK_{EA,BA}
in the kernel source.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The "save" routines copied from the kernel, which are currently
commented out, are unnecessary in qemu. We can copy from env
where the kernel needs special instructions. Fix comment style.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-9-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Using the host address of &frame->sregs is incorrect.
We need the guest address.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Directly reading sc->regs.psw.addr misses the bswap
that may be performed by __get_user.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The function cannot fail.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is an unnecessary complication since we only
support 64-bit mode.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Using the right type simplifies the frame setup.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Noticed via gitlab clang-user job:
TEST signals on s390x
../linux-user/s390x/signal.c:258:9: runtime error: \
1.84467e+19 is outside the range of representable values of \
type 'unsigned long'
Which points to the fact that we were performing a double-to-uint64_t
conversion while storing the fp registers, instead of just copying
the data across.
Turns out there are several errors:
target_ulong is the size of the target register, whereas abi_ulong
is the target 'unsigned long' type. Not a big deal here, since we
only support 64-bit s390x, but not correct either.
In target_sigcontext and target ucontext, we used a host pointer
instead of a target pointer, aka abi_ulong.
Fixing this allows the removal of a cast to __put_user.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The shape of the kernel's __siginfo_fpu_t is dependent on
the cpu type, not the abi. Which is weird, but there ya go.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-23-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Check that the input sp is 16 byte aligned, not 4.
Do that before the lock_user_struct check.
Validate the saved sp is 8 byte aligned.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-22-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Clean up a goto label with a single use. Remove #if 0.
Remove useless parentheses. Fold constants into __put_user.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-21-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stub it out to zero, but at least include it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-20-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Replace __siginfo_t with target_pt_regs, and move si_mask
into target_signal_frame directly.
Extract save/restore functions for target_pt_regs. Adjust
for sparc64 tstate. Use proper get/put functions for psr.
Turns out we were already writing to si_mask twice, so no
need to handle that in the new functions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-16-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Move target_reg_window up and use it. Fold structptr and xxargs
into xargs -- the use of a host pointer was incorrect anyway.
Rename the structure to target_stackf for consistency.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-15-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
All of the source and header files already defer to sparc
via #include. The syscall.tbl and syscallhdr.sh files
could not do the same, but are identical.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-12-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
There are only a few differences in sparc32 vs sparc64.
This fixes target_shmlba for sparc32plus, which is v9.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Share code between sparc32 and sparc64, removing a bit of pointless
difference wrt psr/tstate. Use sizeof(abi_ulong) for allocating
initial register window. Use TARGET_STACK_BIAS.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Move TARGET_STACK_BIAS from signal.c. Generic code cares about the
logical stack pointer, not the physical one that has a bias applied
for sparc64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In most cases we were already passing get_sp_from_cpustate
directly to the function. In other cases, we were passing
a local variable which already contained the same value.
In the rest of the cases, we were passing the stack pointer
out of env directly.
Reviewed by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Now that we have exactly one call, it's easy to pass
in env instead of passing in the sp value.
Use target_save_altstack, which required env.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Note that target_restore_altstack uses the host memory
pointer that we have already verified, so TARGET_EFAULT
is not a possible return value.
Note that using -EFAULT was a bug.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Create a function to match target_save_altstack.
Fix some style and unlock issues in do_sigaltstack.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some target are using llseek instead of _llseek like riscv,
nios2, hexagon, and openrisc.
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210512101358.122781-1-kito.cheng@sifive.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use bit masking instead of an if tree.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210423165413.338259-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
There is no such decoding in linux/arch/arm/nwfpe/fpmodule.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210423165413.338259-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Pull out the fpa11 emulation to a helper function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210423165413.338259-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Syscall unshare did not have custom print function for strace, but it's argument is same as flags in clone syscall, so it can be easily implemented.
Also updated missing flags from clone_flags.
Signed-off-by: Matus Kysel <mkysel@tachyum.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210406144203.1020598-1-mkysel@tachyum.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We can not use watchpoints in user-mode emulation because we
need the softmmu slow path to detect accesses to watchpointed
memory. This code is expanded as empty stub in "hw/core/cpu.h"
anyway, so we can drop it.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210303214708.1727801-18-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
move the call for sysemu specifically in machine_run_board_init,
mirror the calling sequence for user mode too.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210322132800.7470-23-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Here's the first ppc pull request for qemu-6.1. It has a wide variety
of stuff accumulated during the 6.0 freeze. Highlights are:
* Multi-phase reset cleanups for PAPR
* Preliminary cleanups towards allowing !CONFIG_TCG for the ppc target
* Cleanup of AIL logic and extension to POWER10
* Further improvements to handling of hot unplug failures on PAPR
* Allow much larger numbers of CPU on pseries
* Support for the H_SCM_HEALTH hypercall
* Add support for the Pegasos II board
* Substantial cleanup to hflag handling
* Assorted minor fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=N0qr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.1-20210504' into staging
ppc patch queue 2021-05-04
Here's the first ppc pull request for qemu-6.1. It has a wide variety
of stuff accumulated during the 6.0 freeze. Highlights are:
* Multi-phase reset cleanups for PAPR
* Preliminary cleanups towards allowing !CONFIG_TCG for the ppc target
* Cleanup of AIL logic and extension to POWER10
* Further improvements to handling of hot unplug failures on PAPR
* Allow much larger numbers of CPU on pseries
* Support for the H_SCM_HEALTH hypercall
* Add support for the Pegasos II board
* Substantial cleanup to hflag handling
* Assorted minor fixes and cleanups
# gpg: Signature made Tue 04 May 2021 06:52:39 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dg-gitlab/tags/ppc-for-6.1-20210504: (46 commits)
hw/ppc/pnv_psi: Use device_cold_reset() instead of device_legacy_reset()
hw/ppc/spapr_vio: Reset TCE table object with device_cold_reset()
hw/intc/spapr_xive: Use device_cold_reset() instead of device_legacy_reset()
target/ppc: removed VSCR from SPR registration
target/ppc: Reduce the size of ppc_spr_t
target/ppc: Clean up _spr_register et al
target/ppc: Add POWER10 exception model
target/ppc: rework AIL logic in interrupt delivery
target/ppc: move opcode table logic to translate.c
target/ppc: code motion from translate_init.c.inc to gdbstub.c
spapr_drc.c: handle hotunplug errors in drc_unisolate_logical()
spapr.h: increase FDT_MAX_SIZE
spapr.c: do not use MachineClass::max_cpus to limit CPUs
ppc: Rename current DAWR macros and variables
target/ppc: POWER10 supports scv
target/ppc: Fix POWER9 radix guest HV interrupt AIL behaviour
docs/system: ppc: Add documentation for ppce500 machine
roms/u-boot: Bump ppce500 u-boot to v2021.04 to fix broken pci support
roms/Makefile: Update ppce500 u-boot build directory name
ppc/spapr: Add support for implement support for H_SCM_HEALTH
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=aCeG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging
Trivial patches pull request 20210503
# gpg: Signature made Mon 03 May 2021 09:34:56 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-for-6.1-pull-request: (23 commits)
hw/rx/rx-gdbsim: Do not accept invalid memory size
docs: More precisely describe memory-backend-*::id's user
scripts: fix generation update-binfmts templates
docs/system: Document the removal of "compat" property for POWER CPUs
mc146818rtc: put it into the 'misc' category
Do not include exec/address-spaces.h if it's not really necessary
Do not include cpu.h if it's not really necessary
Do not include hw/boards.h if it's not really necessary
Do not include sysemu/sysemu.h if it's not really necessary
hw: Do not include qemu/log.h if it is not necessary
hw: Do not include hw/irq.h if it is not necessary
hw: Do not include hw/sysbus.h if it is not necessary
hw: Remove superfluous includes of hw/hw.h
ui: Fix memory leak in qemu_xkeymap_mapping_table()
hw/usb: Constify VMStateDescription
hw/display/qxl: Constify VMStateDescription
hw/arm: Constify VMStateDescription
vmstate: Constify some VMStateDescriptions
Fix typo in CFI build documentation
hw/pcmcia: Do not register PCMCIA type if not required
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In save_user_regs, there are two bugs where we OR in a bit number
instead of the bit, clobbering the low bits of MSR. However:
The MSR_VR and MSR_SPE bits control the availability of the insns.
If the bits were not already set in MSR, then any attempt to access
those registers would result in SIGILL.
For linux-user, we always initialize MSR to the capabilities
of the cpu. We *could* add checks vs MSR where we currently
check insn_flags and insn_flags2, but we know they match.
Also, there's a stray cut-and-paste comment in restore.
Then, do not force little-endian binaries into big-endian mode.
Finally, use ppc_store_msr for the update to affect hflags.
Which is the reason none of these bugs were previously noticed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-10-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Stop including cpu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Remove hexagon_env_get_cpu and replace with env_archcpu
Replace CPU(hexagon_env_get_cpu(env)) with env_cpu(env)
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-5-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Partially revert 09f679b62d, but only for the length arguments.
Instead of reverting to long, use ssize_t. Reinstate the > 0 check
in unlock_user.
Fixes: 09f679b62d
Reported-by: Coverity (CID 1446711)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210315204004.2025219-1-richard.henderson@linaro.org>
[lv: remove superfluous semicolon]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
