The next patch reduces the effective qemu playback buffer size
by timer-period. Increase the number of jack audio buffers by
one to preserve the total effective buffer size. The size of one
jack audio buffer is 512 samples. With audio defaults that's
512 samples / 44100 samples/s = 11.6 ms and only slightly larger
than the timer-period of 10 ms.
The larger jack audio buffer increases audio dropout safety,
because the high priority jack-audio worker threads can provide
audio data for a longer period of time as with a smaller buffer
and more audio data in the mixing engine buffer that they can't
access.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20220301191311.26695-6-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is a patch to improve the pulseaudio playback experience.
Asking pulseaudio for a playback latency of 15ms is quite
demanding. Increase this to 46ms. The total playback latency
now is 31ms larger. One of the next patches will reduce the
total playback latency again by more than 46ms.
Here is a quote from the PulseAudio Latency Control
documentation: 'For the sake of (...) drop-out safety always
make sure to pick the highest latency possible that fulfills
your needs.'
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-5-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Simplify code by inlining function audio_pcm_sw_get_rpos_in()
at the only call site and remove the duplicated audio_bug()
test.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-4-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a function audio_pcm_hw_conv_in() similar to the existing
counterpart function audio_pcm_hw_clip_out(). This function reduces
the number of calls to the pcm_ops functions get_buffer_in() and
put_buffer_in(). That's one less call to get_buffer_in() and
put_buffer_in() every time the conv_buffer wraps around.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move the function audio_pcm_hw_clip_out() into the correct
section 'Hard voice (playback)'.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace open-coded buffer arithmetic with the new function
audio_ring_posb(). That's the position in backward direction
of a given point at a given distance.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220301191311.26695-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Audio recordings with the DirectSound backend don't sound right.
A look a the Microsoft online documentation tells us why.
From the DirectSound Programming Guide, Capture Buffer Information:
'You can safely copy data from the buffer only up to the read
cursor.'
Change the code to read up to the read cursor instead of the
capture cursor.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20211226154017.6067-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On Windows the jack_set_thread_creator() function and on MacOS the
pthread_setname_np() function with a thread pointer paramater is
not available. Use #ifdefs to remove the jack_set_thread_creator()
function call and the qjack_thread_creator() function in both
cases.
The qjack_thread_creator() function just sets the name of the
created thread for debugging purposes and isn't really necessary.
From the jack_set_thread_creator() documentation:
(...)
No normal application/client should consider calling this. (...)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/785
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20211226154017.6067-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a new -audio backend that accepts D-Bus clients/listeners to handle
playback & recording, to be exported via the -display dbus.
Example usage:
-audiodev dbus,in.mixing-engine=off,out.mixing-engine=off,id=dbus
-display dbus,audiodev=dbus
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
This brings a change that makes audio drivers more similar to all
other modules. All drivers are built by default, while
--audio-drv-list only governs the default choice of the audio driver.
Meson options are added to disable the drivers, and the next patches
will fix the help messages and command line options, and especially
make the non-default drivers available via -audiodev.
Cc: Gerd Hoffman <kraxel@redhat.com>
Cc: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007130630.632028-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ever since winwaveaudio was removed in 2015, CONFIG_AUDIO_WIN_INT
is only set if dsound is in use, so use CONFIG_AUDIO_DSOUND directly.
Cc: Gerd Hoffman <kraxel@redhat.com>
Cc: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007130630.632028-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The audio migration vmstate is empty, and always has been; we can't
just remove it though because an old qemu might send it us.
Changes with -audiodev now mean it's sometimes created when it didn't
used to be, and can confuse migration to old qemu.
Change it so that vmstate_audio is never sent; if it's received it
should still be accepted, and old qemu's shouldn't be too upset if it's
missing.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210809170956.78536-1-dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-9-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On macOS 11.3.1, Core Audio calls AudioDeviceIOProc after calling an
internal function named HALB_Mutex::Lock(), which locks a mutex in
HALB_IOThread::Entry(void*). HALB_Mutex::Lock() is also called in
AudioObjectGetPropertyData, which is called by coreaudio driver.
Therefore, a deadlock will occur if coreaudio driver calls
AudioObjectGetPropertyData while holding a lock for a mutex and tries
to lock the same mutex in AudioDeviceIOProc.
audioDeviceIOProc, which implements AudioDeviceIOProc in coreaudio
driver, requires an exclusive access for the device configuration and
the buffer. Fortunately, a mutex is necessary only for the buffer in
audioDeviceIOProc because a change for the device configuration occurs
only before setting up AudioDeviceIOProc or after stopping the playback
with AudioDeviceStop.
With this change, the mutex owned by the driver will only be used for
the buffer, and the device configuration change will be protected with
the implicit iothread mutex.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20210622201740.38005-1-akihiko.odaki@gmail.com
Message-Id: <20210622201740.38005-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Before commit 7d6948cd98, it was coded to
retrieve the initial output stream format settings, modify the frame
rate, and set again. However, I removed a frame rate modification code by
mistake in the commit. It also assumes the initial output stream format
is consistent with what QEMU expects, but that expectation is not in the
code, which makes it harder to understand and will lead to breakage if
the initial settings change.
This change explicitly sets all of the output stream settings to solve
these problems.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20210616141721.54091-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently with jackaudio client name and qemu guest name unset,
the JACK client names are out-(NULL) and in-(NULL). These names
are user visible in the patch bay. Replace the function call to
qemu_get_vm_name() with a call to audio_application_name() which
replaces NULL with "qemu" to have more descriptive names.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210517194604.2545-4-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move the code to generate the pa_context_new() application name
argument to a function in audio/audio.c. The new function
audio_application_name() will also be used in the jackaudio
backend.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210517194604.2545-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In current code there are no calls to pa_stream_get_latency()
or pa_stream_get_time() to receive latency or time information.
Remove the flags PA_STREAM_INTERPOLATE_TIMING and
PA_STREAM_AUTO_TIMING_UPDATE which instruct PulseAudio to
calculate this information in regular intervals.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210517194604.2545-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Merge the #ifdef DEBUG code with the if statement a few lines
above to avoid bit rot.
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210517194604.2545-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
An output device change can occur when plugging or unplugging an
earphone.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20210311151512.22096-3-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Mac OS X 10.6 was released in 2009.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210311151512.22096-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Delete spaces between function name and open parenthesis'('
Signed-off-by: Zhang Han <zhanghan64@huawei.com>
Message-id: 20210115012431.79533-1-zhanghan64@huawei.com
Message-Id: <20210115012431.79533-8-zhanghan64@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix the line width of code.
Signed-off-by: Zhang Han <zhanghan64@huawei.com>
Message-id: 20210115012431.79533-1-zhanghan64@huawei.com
Message-Id: <20210115012431.79533-5-zhanghan64@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix problems about braces:
-braces are necessary for all arms of if/for/while statements
-else should follow close brace '}'
Signed-off-by: Zhang Han <zhanghan64@huawei.com>
Message-id: 20210115012431.79533-1-zhanghan64@huawei.com
Message-Id: <20210115012431.79533-2-zhanghan64@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is a mismatch between message and used argument. Change
the argument from frequency to format.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-23-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Rename dsound_open() to dsound_set_cooperative_level(). The
only task of that function is to set the cooperative level for
DirectSound.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-21-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
GetForegroundWindow() doesn't necessarily return the own window
handle. It just returns a handle to the currently active window
and can even return NULL. At the time dsound_open() gets called
the active window is most likely the shell window and not the
QEMU window.
Replace GetForegroundWindow() with GetDesktopWindow() which
always returns a valid window handle, and at the same time
replace the DirectSound buffer flag DSBCAPS_STICKYFOCUS with
DSBCAPS_GLOBALFOCUS where Windows only expects a valid window
handle for DirectSound function SetCooperativeLevel(). The
Microsoft online docs for IDirectSound::SetCooperativeLevel
recommend this in the remarks.
This fixes a bug where you can't hear sound from the guest.
To reproduce start qemu with -machine pcspk-audiodev=audio0
-device intel-hda -device hda-duplex,audiodev=audio0
-audiodev dsound,id=audio0,out.mixing-engine=off
from a shell and start audio playback with the hda device in the
guest. The guest will be silent. To hear guest audio you have to
activate the shell window once.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-20-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tell PulseAudio to send recorded audio data in smaller chunks
than timer_period, so there's a good chance that qemu can read
recorded audio data every time it looks for new data.
PulseAudio tries to send buffer updates at a fragsize / 2 rate.
With fragsize = timer_period / 2 * 3 the update rate is 75% of
timer_period. The lower limit for the recording buffer size
maxlength is fragsize * 2.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-19-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently with the playback buffer attribute minreq = -1 and flag
PA_STREAM_EARLY_REQUESTS PulseAudio uses minreq = tlength / 4.
To improve audio playback with larger PulseAudio server side
buffers, limit minreq to a maximum of 75% of audio timer_rate.
That way there is a good chance qemu receives a stream buffer
size update before it tries to write data to the playback stream.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-18-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The audio buffer size in audio/paaudio.c is typically larger
than expected. Just comment the bugs in qpa_init_in() and
qpa_init_out() for now. Fixing these bugs may break glitch free
audio playback with fine tuned user audio settings.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-17-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Don't call pa_stream_writable_size() in qpa_get_buffer_out()
before the playback stream is ready. This prevents a lot of the
following pulseaudio error messages.
pulseaudio: pa_stream_writable_size failed
pulseaudio: Reason: Bad state
To reproduce start qemu with
-parallel none -device gus,audiodev=audio0 -audiodev pa,id=audio0
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-15-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Don't call pa_stream_writable_size() in qpa_write() before the
playback stream is ready. This prevents a lot of the following
pulseaudio error messages.
pulseaudio: pa_stream_writable_size failed
pulseaudio: Reason: Bad state
To reproduce start qemu with
-parallel none -device gus,audiodev=audio0
-audiodev pa,id=audio0,out.mixing-engine=off
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-14-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The pulseaudio backend currently converts, clips and copies audio
playback samples in the mixing-engine sample buffer multiple
times.
In qpa_get_buffer_out() the function pa_stream_begin_write()
returns a rather large buffer and this allows audio_pcm_hw_run_out()
in audio/audio.c to copy all samples in the mixing-engine buffer
to the pulse audio buffer. Immediately after copying, qpa_write()
notices with a call to pa_stream_writable_size() that pulse audio
only needs a smaller part of the copied samples and ignores the
rest. This copy and ignore process happens several times for each
audio sample.
To fix this behaviour, call pa_stream_writable_size() in
qpa_get_buffer_out() to limit the number of samples
audio_pcm_hw_run_out() will convert. With this change the
pulseaudio pcm_ops functions put_buffer_out and write are no
longer identical and a separate qpa_put_buffer_out is needed.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-13-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Break the unnecessary dependency of the generic buffer management
code on mixing-engine. This is required for the next patch.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-10-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add audio recording functions. SDL 2.0.5 or later is required to
use the recording functions. Playback continues to work with
earlier SDL 2.0 versions.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-9-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Split off pcm_ops function run_buffer_in from get_buffer_in and
call run_buffer_in before get_buffer_in.
The next patch only needs the generic buffer management part
from audio_generic_get_buffer_in().
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-8-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With the modern audio functions it's possible to add new
features like audio recording.
As a side effect this patch fixes a bug where SDL2 can't be used
on Windows. This bug was reported on the qemu-devel mailing list at
https://lists.nongnu.org/archive/html/qemu-devel/2020-01/msg04043.html
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-7-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fill the remaining sample buffer with silence. To fill it with
zeroes is wrong for unsigned samples because this is silence
with a DC bias.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-6-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Always fill the remaining audio callback buffer with silence.
SDL 2.0 doesn't initialize the audio callback buffer. This was
an incompatible change compared to SDL 1.2. For reference read
the SDL 1.2 to 2.0 migration guide.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-5-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Every emulated audio device has a way to enable audio playback. Don't
start playback until the guest enables the audio device. This patch
keeps the SDL2 device pause state in sync with hw->enabled.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-4-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently there is a crackling noise with SDL2 audio playback.
Commit bcf19777df: "audio/sdlaudio: Allow audio playback with
SDL2" already mentioned the crackling noise.
Add an out.buffer-count option to give users a chance to select
sane settings for glitch free audio playback. The idea was taken
from the coreaudio backend.
The in.buffer-count option will be used with one of the next
patches.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move the property types and property macros implemented in
qdev-properties-system.c to a new qdev-properties-system.h
header.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Check whenever we actually found the spiceaudio driver
before flipping the can_be_default field.
Fixes: f0c4555edf ("audio: remove qemu_spice_audio_init()")
Buglink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=977301
Reported-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20201215081151.20095-1-kraxel@redhat.com>
This code (introduced in commit 1d14ffa97e, Oct 2005)
is likely unused since years. Time to remove it. If
the condition is true, simply call abort().
Suggested-by: Gerd Hoffmann <gerd@kraxel.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201210223506.263709-1-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The previous commit removed the last call site of
audio_is_cleaning_up(). Remove the now unused function.
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20201213130528.5863-4-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Always stop audio playback and remove the playback callback when
QEMU exits.
On shut down the function coreaudio_fini_out() destroys the
coreaudio mutex but fails to stop audio playback and to remove the
audio playback callback, because function audio_is_cleaning_up()
always returns true when called from coreaudio_fini_out(). Now
there is a time window from pthread_mutex_destroy() to program
exit where Core Audio may call the audio playback callback which
tries to lock the destroyed coreaudio mutex. This leads to the
following error.
coreaudio: Could not lock voice for audioDeviceIOProc
Reason: Invalid argument
This bug was reported on the qemu-discuss mailing list.
https://lists.nongnu.org/archive/html/qemu-discuss/2020-10/msg00018.html
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20201213130528.5863-3-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Every emulated audio device has a way to enable audio playback. Don't
start playback until the guest enables the audio device to keep the
Core Audio device run state in sync with hw->enabled.
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20201213130528.5863-2-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While the variable once was used to fake audio settings, since
commit ed2a4a7941 "audio: proper support for float samples in
mixeng" this is no longer true. Rename the variable to obt_as.
This is the same naming scheme as in audio/sdlaudio.c
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20201213130528.5863-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This change registers a bottom handler to close the JACK client
connection when a server shutdown signal is received. Without this
libjack2 attempts to "clean up" old clients and causes a use after free
segfault.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20201108063351.35804-2-geoff@hostfission.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Used for files which (with CONFIG_SPICE=y) depend on spice header files
to pick up some enum, but which do not depend on on the actual spice
shared library.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201014121120.13482-6-kraxel@redhat.com
cur_mon really needs to be coroutine-local as soon as we move monitor
command handlers to coroutines and let them yield. As a first step, just
remove all direct accesses to cur_mon so that we can implement this in
the getter function later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-4-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
Handle the spice special case in audio_init instead.
With the qemu_spice_audio_init() symbol dependency being
gone we can build spiceaudio as module.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200916084117.21828-2-kraxel@redhat.com
Run the downstream playback queue even if there are no samples
in the mixing engine buffer. The downstream queue may still have
queued samples.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-7-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function audio_generic_write should work exactly like
audio_pcm_hw_run_out. It's a very similar function working on a
different buffer.
This patch significantly reduces the number of drop-outs with
the DirectSound backend. To hear the difference start qemu with
-audiodev dsound,id=audio0,out.mixing-engine=off and play a
song in the guest with and without this patch.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-6-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch removes unnecessary calls to the pcm_ops function
put_buffer_in(). No audio backend needs this call if the
returned length of pcm_ops function get_buffer_in() is zero.
For the DirectSound backend this prevents a call to
dsound_unlock_in() without a preceding call to dsound_lock_in().
While Windows doesn't complain it seems wrong anyway.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-5-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function audio_generic_read should work exactly like
audio_pcm_hw_run_in. It's a very similar function working
on a different buffer.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-4-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The playback rate with the spiceaudio backend is currently too
fast if there's no spice client connected or the spice client
can't play audio. Rate limit the audio playback stream in all
cases. To calculate the rate correctly the limiter has to know
the maximum buffer size.
Fixes: 8c198ff065 ("spiceaudio: port to the new audio backend api")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-3-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch allows the audio backends get_buffer_out() functions
to drop audio data and mitigates a bug reported on the qemu-devel
mailing list.
https://lists.nongnu.org/archive/html/qemu-devel/2020-09/msg03832.html
The new rules for the variables buf and size returned by
get_buffer_out() are:
size == 0: Downstream playback buffer is full. Retry later.
size > 0, buf != NULL: Copy size bytes to buf for playback.
size > 0, buf == NULL: Drop size bytes.
The audio playback rate with spiceaudio for the no audio case is
too fast, but that's what we had before commit fb35c2cec5
"audio/dsound: fix invalid parameters error". The complete fix
comes with the next patch.
Reported-by: Qi Zhou <atmgnd@outlook.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-2-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With the next patch all audio backends put_buffer_out() functions
have to handle the buf == NULL case, provided the get_buffer_out()
function may return buf = NULL and size > 0.
It turns out that all audio backends get_buffer_out() functions
either can't return buf = NULL or return buf = NULL and size = 0
at the same time. The only exception is the spiceaudio backend
where size may be uninitialized.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Alex Bennee <alex.bennee@linaro.org>
Message-Id: <20200917075029.313-2-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Tracked down with the help of scripts/cleanup-trace-events.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20200806141334.3646302-4-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In function oss_read() a read error currently does not exit the
read loop. With no data to read the variable pos will quickly
underflow and a subsequent successful read overwrites memory
outside the buffer. This patch adds the missing break statement
to the error path of the function.
To reproduce start qemu with -audiodev oss,id=audio0 and in the
guest start audio recording. After some time this will trigger
an exception.
Fixes: 3ba4066d08 "ossaudio: port to the new audio backend api"
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200707180836.5435-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
See recent commit "error: Document Error API usage rules" for
rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-18-armbru@redhat.com>
Instead of checking for the audodev state in each code path, centralize
the check into the initialize function itself to make it safe to call it
at any time.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-id: 20200613040518.38172-7-geoff@hostfission.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When the guest closes the audio device we must start dropping input
samples from JACK and zeroing the output buffer samples. Failure to do
so causes sound artifacts during operations such as guest OS reboot, and
causes a hang of the input pipeline breaking it until QEMU is restated.
Closing and reconnecting to JACK was tested during these enable/disable
calls which works well for Linux guests, however Windows re-opens the
audio hardware repeatedly even when doing simple tasks like playing a
system sounds. As such it was decided it is better to feed silence to
JACK while the device is disabled.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-id: 20200613040518.38172-6-geoff@hostfission.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This fixes a hang when there is a communications issue with the JACK
server. Simply closing the connection is enough to completely clean up
and as such we do not need to remove the ports first. As JACK uses a
socket based protocol that relies on the `select` call, if there is a
communication breakdown with the server the client library waits
forever for a response to the unregister request.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-id: 20200613040518.38172-5-geoff@hostfission.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Initial code for JACK did not support audio input and as such this
boolean was set to let QEMU know, however JACK ended up including input
support making this invalid. Further investigation shows it was invalid
to set it in the first instance anyway due to a failure on my part
understand properly what this was for when the audodev was initially
developed.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-id: 20200613040518.38172-4-geoff@hostfission.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
JACK does not provide us with the configured buffer size until after
activiation which was overriding this minimum value. JACK itself doesn't
have this minimum limitation, but the QEMU virtual hardware and as such
it must be enforced, failure to do so results in audio discontinuities.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-id: 20200613040518.38172-2-geoff@hostfission.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The buffer is the captured input to pass to backends.
As we should not modify it, mark the argument const.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200505132603.8575-3-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The samples are the input to convert to u64. As we should
not modify them, mark the argument const.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200505132603.8575-2-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 571a8c522e caused the HMP wavcapture command to segfault when
processing audio data in audio_pcm_sw_write(), where a NULL
sw->hw->pcm_ops is dereferenced. This fix checks that the pointer is
valid before dereferincing it. A similar fix is also made in the
parallel function audio_pcm_sw_read().
Fixes: 571a8c522e (audio: split ctl_* functions into enable_* and
volume_*)
Signed-off-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200521172931.121903-1-brogers@suse.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The code in CONV_NATURAL_FLOAT() and CLIP_NATURAL_FLOAT()
seems to use the constant 2^31-0.5 to convert float to integer
and back. But the float type lacks the required precision and
the constant used for the conversion is 2^31. This is equiva-
lent to a [-1.f, 1.f] <-> [INT32_MIN, INT32_MAX + 1] mapping.
This patch explicitly writes down the used constant. The
compiler generated code doesn't change.
The constant 2^31 has an exact float representation and the
clang 10 compiler stops complaining about an implicit int to
float conversion with a changed value.
A few notes:
- The conversion of 1.f to INT32_MAX + 1 doesn't overflow. The
type of the destination variable is int64_t.
- At a later stage one of the clip_* functions in
audio/mixeng_template.h limits INT32_MAX + 1 to the integer
range.
- The clip_natural_float_* functions in audio/mixeng.c convert
INT32_MAX and INT32_MAX + 1 to 1.f.
Buglink: https://bugs.launchpad.net/bugs/1878627
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200523201712.23908-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This commit adds a new audiodev backend to allow QEMU to use JACK as
both an audio sink and source.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-Id: <20200512101603.E3DB73A038E@moya.office.hostfission.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch prevents an underflow of variable samples in function
audio_pcm_hw_run_in(). See commit 599eac4e5a "audio:
audio_generic_get_buffer_in should honor *size". This time the
while loop in audio_pcm_hw_run_in() will terminate nevertheless,
because it seems the recording stream in Windows is always rate
limited.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200405075017.9901-3-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
IDirectSoundCaptureBuffer_Lock() fails on Windows when called
with len = 0. Return early from dsound_get_buffer_in() in this
case.
To reproduce the warning start a linux guest. In the guest
start Audacity and you will see a lot of "Could not lock
capture buffer" warnings.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200405075017.9901-2-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the DirectSound backend fails to stop audio playback
in dsound_enable_out(). To detect a lost buffer condition
dsound_get_status_out() incorrectly uses the error code
DSERR_BUFFERLOST instead of flag DSBSTATUS_BUFFERLOST as a mask
and returns with an error. As a result dsound_enable_out()
returns early and doesn't stop playback.
To reproduce the bug start qemu on a Windows host with
-soundhw pcspk -audiodev dsound,id=audio0. On the guest
FreeDOS 1.2 command line enter beep. The image Day 1 - F-Bird
from the QEMU Advent Calendar 2018 shows the bug as well.
Buglink: https://bugs.launchpad.net/qemu/+bug/1699628
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200405075017.9901-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The current positive limit for the saturation nonlinearity is
only correct if the type of the result has 8 bits or less.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200308193321.20668-5-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the internal float range of the mixing engine is
[-.5f, .5f]. PulseAudio, SDL2 and libasound use a [-1.f, 1.f]
range. This means with float samples the audio playback volume
is 6dB too low and audio recording signals will be clipped in
most cases.
To avoid another scaling factor in the conv_natural_float_* and
clip_natural_float_* functions with FLOAT_MIXENG defined this
patch changes the mixing engine float range to [-1.f, 1.f].
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200308193321.20668-4-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Change the clip_natural_float_from_mono() function in
audio/mixeng.c to be consistent with the clip_*_from_mono()
functions in audio/mixeng_template.h.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200308193321.20668-3-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
