x2apic feature is in the kvm_default_props and automatically added to all
CPU models when KVM is enabled. But userspace devices don't support x2apic
which can't be enabled without the in-kernel irqchip. It will trigger
warning of "host doesn't support requested feature: CPUID.01H:ECX.x2apic
[bit 21]" when kernel_irqchip is off. This patch is to fix it via removing
x2apic feature when kernel_irqchip is off.
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
With Hyper-V enabled CPU hotplug stops working. The CPU appears
in device manager on Windows but does not appear in peformance
monitor and control panel.
The root of the problem is the following. Windows checks
HV_X64_CPU_DYNAMIC_PARTITIONING_AVAILABLE bit in CPUID. The
presence of this bit is enough to cure the situation.
The bit should be set when CPU hotplug is allowed for HyperV VM.
The check that hot_add_cpu callback is defined is enough from the
protocol point of view. Though this callback is defined almost
always thus there is no need to export that knowledge in the
other way.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We discriminate here between opcodes that are illegal in the current
cpu mode or with illegal arguments (such as modrm.mod == 3) and
encodings that are unknown (such as an unimplemented isa extension).
Signed-off-by: Richard Henderson <rth@twiddle.net>
The patch in 7f0b714 was too simplistic, in that we wound up setting
the flag and then resetting it immediately in gen_eob.
Fixes the reported boot problem with Windows XP.
Reported-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
While ADDSEG will only be false in 16-bit mode for LEA, it can be
false even in other cases when 16-bit addresses are obtained via
the 67h prefix in 32-bit mode. In this case, gen_lea_v_seg forgets
to add a nonzero FS or GS base if CS/DS/ES/SS are all zero. This
case is pretty rare but happens when booting Windows 95/98, and
this patch fixes it.
The bug is visible since commit d6a291498, but it was introduced
together with gen_lea_v_seg and it probably could be reproduced
with a "addr16 gs movsb" instruction as early as in commit
ca2f29f555.
Reported-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1456931078-21635-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
In non-64-bit modes, the instruction always stores 16 bits.
But in 64-bit mode, when the destination is a register, the
instruction can write 32 or 64 bits.
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Two flags were tested the wrong way.
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1456845145-18891-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
[rth: Fixed enable test as well.]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJW5uhRAAoJEDuxQgLoOKytsNoH/3cPTY1HAIXik9pOxU2leYvJ
E2cHjdyMWs9aJ3iXxqAjg8jD10s6C2ppgmH/d+xsIZl5SYLTu0WYWOFIzZ4n4W+6
m+CgxK4ChIZmYd3WY5XqjlkjQjtnTQtPl89nxibHBS6xMCkc59LcYbI2m2xR0UaD
iOkVj1t1uarW7usz2l4QGBKsqy+syV3TPy2DV71q04fAiF/g+WImTUfZr2u/zBiS
m8Q9UY0wEHmRLaNzzddzrYomCz4C99ULgUxssfHAoHShtj5lldrCrag2VNhNZRGx
c7KmnsdP+Q59zTOYbIxs3nXNoI6woQ/uPbTw9NWbJGa+tlbIHoqCiuxYeschmlg=
=ZR1k
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2016-03-14-v2' into queue-block
Block patches for pi day, v2.
# gpg: Signature made Mon Mar 14 17:35:29 2016 CET using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
* mreitz/tags/pull-block-for-kevin-2016-03-14-v2:
iotests: Add test for QMP event rates
monitor: Use QEMU_CLOCK_VIRTUAL for the event queue in qtest mode
monitor: Separate QUORUM_REPORT_BAD events according to the node name
quorum: Fix crash in quorum_aio_cb()
iotests: Correct 081's reference output
block: Remove unused typedef of BlockDriverDirtyHandler
block: Move block dirty bitmap code to separate files
typedefs: Add BdrvDirtyBitmap
block: Include hbitmap.h in block.h
backup: Use Bitmap to replace "s->bitmap"
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test verifies that the rate-limited QMP events are emitted at a
maximum rate of 1 per second as defined in monitor_qapi_event_conf in
monitor.c
It also checks that QUORUM_REPORT_BAD events generated from different
nodes are kept in separate queues so they don't mask each other.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 0dbd3ee88a59a6363042ad81cfb345037bfbf612.1457610443.git.berto@igalia.com
[mreitz@redhat.com: Renamed test from 146 to 148]
Signed-off-by: Max Reitz <mreitz@redhat.com>
This allows us to perform tests on the monitor queues to verify that
the rate limits are enforced.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: dde511809e954a5c32d5b648bb184c03c89ed5d5.1457610443.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The QUORUM_REPORT_BAD event is emitted whenever there's an I/O error
in a child of a Quorum device. This event is emitted at a maximum rate
of 1 per second. This means that an error in one of the children will
mask errors in the other children if they happen within the same 1
second interval.
This patch modifies qapi_event_throttle_equal() so QUORUM_REPORT_BAD
events are kept separately if they come from different children.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: b989c0cb3755bc4b6696e796fa8ed2ef6c56606a.1457610443.git.berto@igalia.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
quorum_aio_cb() emits the QUORUM_REPORT_BAD event if there's
an I/O error in a Quorum child. However sacb->aiocb must be
correctly initialized for this to happen. read_quorum_children() and
read_fifo_child() are not doing this, which results in a QEMU crash.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 8138570d071ba7e25db3736979234a1fd71dbd05.1457610443.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The newly added type parameter for the QUORUM_REPORT_BAD event changed
the output of iotest 081, so the reference should be amended
accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 1457705687-27122-1-git-send-email-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
The only code change is making bdrv_dirty_bitmap_truncate public. It is
used in block.c.
Also two long lines (bdrv_get_dirty) are wrapped.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1457412306-18940-5-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Following patches to refactor and move block dirty bitmap code could use
this.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1457412306-18940-4-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
"s->bitmap" tracks done sectors, we only check bit states without using any
iterator which HBitmap is good for. Switch to "Bitmap" which is simpler and
more memory efficient.
Meanwhile, rename it to done_bitmap, to reflect the intention.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1457412306-18940-2-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJW5qAFAAoJEJykq7OBq3PIii0H/1u46qp77HP0NLp2NXSqKc/T
gdFXcI/yquclABMk0L79yxigC3KtpACHWSXmHkEnAAYIPJNfoez59Ol7U10gDP8k
NKL0avpPbukCzuenlkP0/uGDwS3c25+zWxd5eabhL9AapsnAKvJdhnzkbLT62gP7
cemrHwnXRkRmKKGeloAiJiKxZakM44yr05MMAI+Yt0bsKFxGwmM63ZAW8KESJBlE
CodIEROBSDcOusN3EkBE6zBnVEb7RVVROk3QmdFjLE8olDH7Pn5yfMzs5mmgJErt
CCy1sPPIqBeHnLOAo0HrUazF06HnIC6WXa86Xg/emcodaFuwFivRrcege2dkHEc=
=T7PV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Mon 14 Mar 2016 11:27:01 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/tracing-pull-request:
trace: separate MMIO tracepoints from TB-access tracepoints
trace: include CPU index in trace_memory_region_*()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We check that the guest can't write beyond the end of its disk, but for
other internal users it can make sense to allow growing a file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that we can use drive_add to create new nodes without a BB, we also
want to be able to delete such nodes again.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This patch adds an option to the drive_add HMP command to create only a
BlockDriverState without a BlockBackend on top.
The motivation for this is that libvirt needs to specify options to a
migration target (specifically, detect-zeroes). drive-mirror doesn't
allow specifying options, and the proper way to do this is to create the
target BDS separately with blockdev-add (where you can specify options)
and then use blockdev-mirror to that BDS.
However, libvirt can't use blockdev-add as long as it is still
experimental, and we're expecting that it will still take some time, so
we need to resort to drive_add.
The problem with drive_add is that so far it always created a BB, and
BDSes with a BB can't be used as a mirroring target as long as we don't
support multiple BBs per BDS - and while we're working towards that
goal, it's another thing that will still take some time.
So to achieve the goal, the simplest solution to provide the
functionality now without adding one-off options to the mirror QMP
commands is to extend drive_add to create nodes without BBs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is only called once for each opened image, so we can do it the easy
way.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Without setting explicit defaults in the options, blockdev-add without
an ID ended up defaulting to writethrough. It should be writeback as
documented.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Since commit 91a097e, we end up with a somewhat weird cache mode
configuration with snapshot=on: The commit broke the cache mode
inheritance for the snapshot overlay so that it is opened as
writethrough instead of unsafe now. The following bdrv_append() call to
put it on top of the tree swaps the WCE flag with the snapshot's backing
file (i.e. the originally given file), so what we eventually get is
cache=writeback on the temporary overlay and
cache=writethrough,cache.no-flush=on on the real image file.
This patch changes things so that the temporary overlay gets
cache=unsafe again like it used to, and the real images get whatever the
user specified. This means that cache.direct is now respected even with
snapshot=on, and in the case of committing changes, the final flush is
no longer ignored except explicitly requested by the user.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Calling bdrv_img_create() with a size of -1 means that it determines the
size automatically by opening the backing file. However, in the case of
live snapshots, the backing file is already opened and we must avoid
opening the same image twice at the same time. Apart from that, just
getting the size from the already existing BDS is a lot less overhead
than opening a new instance.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Keep flush interface the same logic as quorum read/write, Otherwise in
following scenario, we'll encounter unexpected errors.
Quorum has two children(A, B). A do flush sucessfully, but B flush failed.
This cause the filesystem of guest become read-only with following errors:
end_request: I/O error, dev vda, sector 11159960
Aborting journal on device vda3-8
EXT4-fs error (device vda3): ext4_journal_start_sb:327: Detected abort journal
EXT4-fs (vda3): Remounting filesystem read-only
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce QuorumOpType, and make QUORUM_REPORT_BAD compatible
with it.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When QEMU creates a VHD image, it goes by the original spec,
calculating the current_size based on the nearest CHS geometry (with an
exception for disks > 127GB).
Apparently, Azure will only allow images that are sized to the nearest
MB, and the current_size as calculated from CHS cannot guarantee that.
Allow QEMU to create images similar to how Hyper-V creates images, by
setting current_size to the specified virtual disk size. This
introduces an option, force_size, to be passed to the vpc format during
image creation, e.g.:
qemu-img convert -f raw -o force_size -O vpc test.img test.vhd
When using the "force_size" option, the creator app field used by
QEMU will be "qem2" instead of "qemu", to indicate the difference.
In light of this, we also add parsing of the "qem2" field during
vpc_open.
Bug reference: https://bugs.launchpad.net/qemu/+bug/1490611
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests auto-detection, and overrides, of VHD image sizes created
by Virtual PC, Hyper-V, and Disk2vhd.
This adds three sample images:
hyperv2012r2-dynamic.vhd.bz2 - dynamic VHD image created with Hyper-V
virtualpc-dynamic.vhd.bz2 - dynamic VHD image created with Virtual PC
d2v-zerofilled.vhd.bz2 - dynamic VHD image created with Disk2vhd
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The VHD file format is used by both Virtual PC, and Hyper-V. However,
how the virtual disk size is calculated varies between the two.
Virtual PC uses the CHS drive parameters to determine the drive size.
Hyper-V, on the other hand, uses the current_size field in the footer
when determining image size.
This is problematic for a few reasons:
* VHD images from Hyper-V, using CHS calculations, will likely be
trunctated.
* If we just rely always on current_size, then QEMU may have data
compatibility issues with Virtual PC (we may write too much data
into a VHD file to be used by Virtual PC, for instance).
* Existing VHD images created by QEMU have used the CHS calculations,
except for images exceeding the 127GB limit. We want to remain
compatible with our own generated images.
Luckily, the VHD specification defines a 'Creator App' field, that is
used to indicate what software created the VHD file.
This patch does two things:
1. Uses the 'Creator App' field to help determine how to calculate
size, and
2. Adds a VPC format option 'force_size_calc', so that the user can
override the 'Creator App' auto-detection, in case there exist
VHD images with unknown or contradictory 'Creator App' entries.
N.B.: We currently use the maximum CHS value as an indication to use the
current_size field. This patch does not change that, even with the
'force_size_calc' option.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit 5ec18f8c, query-blockstats didn't return the statistics of
drives without media any more because such drives have only a BB now,
but not a BDS any more.
This patch fixes the regression so that query-blockstats iterates over
BBs by default and empty drives are displayed again.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The new functions handles the data that is taken from the
BlockDriverState.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The new functions handles the data that is taken from the BlockBackend.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
