This will allow us to control exactly what scratch register is
used for loading the constant.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Handle 32-bit constants with a separate function, so that
tcg_out_movi_int does not need to recurse. This slightly
rearranges the order of tests for small constants, but
produces the same output.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When BH is constant, it is constrained to 11 bits for use in MOVCC.
For the cases in which we must load the constant BH into a register,
we do not need the full logic of tcg_out_movi; we can use the simpler
function for emitting a 13 bit constant.
This eliminates the only case in which TCG_REG_T2 was passed to
tcg_out_movi, which will shortly become invalid.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can use the routines just added for user-only to emit
unaligned accesses in softmmu mode too.
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is kinda sorta the opposite of the other tcg hosts, where
we get (normal) alignment checks for free with host SIGBUS and
need to add code to support unaligned accesses.
Fortunately, the ISA contains pairs of instructions that are
used to implement unaligned memory accesses. Use them.
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reserve a register for the guest_base using aarch64 for reference.
By doing so, we do not have to recompute it for every memory load.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From armv6, the architecture supports unaligned accesses.
All we need to do is perform the correct alignment check
in tcg_out_tlb_read.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will shortly allow the use of unaligned memory accesses,
and these require proper alignment. Use get_alignment_bits
to verify and remove USING_SOFTMMU.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is now always true, since we require armv6.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is now always true, since we require armv6.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Support for unaligned accesses is difficult for pre-v6 hosts.
While debian still builds for armv4, we cannot use a compile
time test, so test the architecture at runtime and error out.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220106134238.3936163-1-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Apparently we were left behind; just renaming MO_Q to MO_UQ is enough.
Fixes: fc313c6434 ("exec/memop: Adding signedness to quad definitions")
Signed-off-by: WANG Xuerui <git@xen0n.name>
Message-Id: <20220206162106.1092364-1-i.qemu@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
__get_cpuid_max returns an unsigned value.
For consistency, store the result in an unsigned variable.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Renaming defines for quad in their various forms so that their signedness is
now explicit.
Done using git grep as suggested by Philippe, with a bit of hand edition to
keep assignments aligned.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bitwise operations are easy to fold, because the operation is
identical regardless of element size. But add and sub need
extra element size info that is not currently propagated.
Fixes: 2f9f08ba43
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/799
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211221054105.178795-28-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211221054105.178795-27-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211221054105.178795-26-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211221054105.178795-25-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211221054105.178795-24-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211221054105.178795-23-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211221054105.178795-22-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211221054105.178795-21-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211221054105.178795-20-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211221054105.178795-19-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The neg_i{32,64} ops is fully expressible with sub, so omitted for
simplicity.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211221054105.178795-18-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211221054105.178795-17-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211221054105.178795-16-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211221054105.178795-15-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211221054105.178795-14-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211221054105.178795-13-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211221054105.178795-12-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211221054105.178795-11-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211221054105.178795-10-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211221054105.178795-9-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211221054105.178795-8-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211221054105.178795-7-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211221054105.178795-6-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211221054105.178795-5-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Support for all optional TCG ops are initially marked disabled; the bits
are to be set in individual commits later.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211221054105.178795-4-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With arm32, the ABI gives us 8-byte alignment for the stack.
While it's possible to realign the stack to provide 16-byte alignment,
it's far easier to simply not encode 16-byte alignment in the
VLD1 and VST1 instructions that we emit.
Remove the assertion in temp_allocate_frame, limit natural alignment
to the provided stack alignment, and add a comment.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1999878
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210912174925.200132-1-richard.henderson@linaro.org>
Message-Id: <20211206191335.230683-2-richard.henderson@linaro.org>
Newly defined tcg_out_vec_op (34ef767609 tcg/s390x: Add host vector framework)
for s390x uses pointer argument definition.
This fails on gcc 11 as original declaration uses array argument:
In file included from ../tcg/tcg.c:430:
/builddir/build/BUILD/qemu-6.1.50/tcg/s390x/tcg-target.c.inc:2702:42: error: argument 5 of type 'const TCGArg *' {aka 'const long unsigned int *'} declared as a pointer [-Werror=array-parameter=]
2702 | const TCGArg *args, const int *const_args)
| ~~~~~~~~~~~~~~^~~~
../tcg/tcg.c:121:41: note: previously declared as an array 'const TCGArg[16]' {aka 'const long unsigned int[16]'}
121 | const TCGArg args[TCG_MAX_OP_ARGS],
| ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
In file included from ../tcg/tcg.c:430:
/builddir/build/BUILD/qemu-6.1.50/tcg/s390x/tcg-target.c.inc:2702:59: error: argument 6 of type 'const int *' declared as a pointer [-Werror=array-parameter=]
2702 | const TCGArg *args, const int *const_args)
| ~~~~~~~~~~~^~~~~~~~~~
../tcg/tcg.c:122:38: note: previously declared as an array 'const int[16]'
122 | const int const_args[TCG_MAX_OP_ARGS]);
| ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixing argument type to pass build.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211027085629.240704-1-mrezanin@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is no bug, but silence a warning about computation
in int32_t being assigned to a uint64_t.
Reported-by: Coverity CID 1465220
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is a counterpart to the HMP "info opcount" command. It is being
added with an "x-" prefix because this QMP command is intended as an
ad hoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a counterpart to the HMP "info jit" command. It is being
added with an "x-" prefix because this QMP command is intended as an
ad hoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For constant shifts, we can simply shift the s_mask.
For variable shifts, we know that sar does not reduce
the s_mask, which helps for sequences like
ext32s_i64 t, in
sar_i64 t, t, v
ext32s_i64 out, t
allowing the final extend to be eliminated.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The results are generally 6 bit unsigned values, though
the count leading and trailing bits may produce any value
for a zero input.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The result is either 0 or 1, which means that we have
a 2 bit signed result, and thus 62 bits of sign.
For clarity, use the smask_from_zmask function.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Sign repetitions are perforce all identical, whether they are 1 or 0.
Bitwise operations preserve the relative quantity of the repetitions.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Certain targets, like riscv, produce signed 32-bit results.
This can lead to lots of redundant extensions as values are
manipulated.
Begin by tracking only the obvious sign-extensions, and
converting them to simple copies when possible.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Recognize the constant function for remainder.
Suggested-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Recognize the identity function for division.
Suggested-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Recognize the identity function for low-part multiply.
Suggested-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Recognize the constant function for or-complement.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This "garbage" setting pre-dates the addition of the type
changing opcodes INDEX_op_ext_i32_i64, INDEX_op_extu_i32_i64,
and INDEX_op_extr{l,h}_i64_i32.
So now we have a definitive points at which to adjust z_mask
to eliminate such bits from the 32-bit operands.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pretending that the source is i64 when it is in fact i32 is
incorrect; we have type-changing opcodes that must be used.
This bug trips up the subsequent change to the optimizer.
Fixes: 4f2331e5b6
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Most of these are handled by creating a fold_const2_commutative
to handle all of the binary operators. The rest were already
handled on a case-by-case basis in the switch, and have their
own fold function in which to place the call.
We now have only one major switch on TCGOpcode.
Introduce NO_DEST and a block comment for swap_commutative in
order to make the handling of brcond and movcond opcodes cleaner.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename to fold_addsub2.
Use Int128 to implement the wider operation.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename to fold_multiply2, and handle muls2_i32, mulu2_i64,
and muls2_i64.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move all of the known-zero optimizations into the per-opcode
functions. Use fold_masks when there is a possibility of the
result being determined, and simply set ctx->z_mask otherwise.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pull the "op r, 0, b => movi r, 0" optimization into a function,
and use it in fold_shift.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pull the "op r, a, i => mov r, a" optimization into a function,
and use them in the outer-most logical operations.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Even though there is only one user, place this more complex
conversion into its own helper.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out the conditional conversion from a more complex logical
operation to a simple NOT. Create a couple more helpers to make
this easy for the outer-most logical operations.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Compute the type of the operation early.
There are at least 4 places that used a def->flags ladder
to determine the type of the operation being optimized.
There were two places that assumed !TCG_OPF_64BIT means
TCG_TYPE_I32, and so could potentially compute incorrect
results for vector operations.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pull the "op r, a, 0 => movi r, 0" optimization into a function,
and use it in the outer opcode fold functions.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pull the "op r, a, a => mov r, a" optimization into a function,
and use it in the outer opcode fold functions.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pull the "op r, a, a => movi r, 0" optimization into a function,
and use it in the outer opcode fold functions.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is the final entry in the main switch that was in a
different form. After this, we have the option to convert
the switch into a function dispatch table.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add two additional helpers, fold_add2_i32 and fold_sub2_i32
which will not be simple wrappers forever.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reduce some code duplication by folding the NE and EQ cases.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reduce some code duplication by folding the NE and EQ cases.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out a whole bunch of placeholder functions, which are
currently identical. That won't last as more code gets moved.
Use CASE_32_64_VEC for some logical operators that previously
missed the addition of vectors.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This puts the separate mb optimization into the same framework
as the others. While fold_qemu_{ld,st} are currently identical,
that won't last as more code gets moved.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Copy z_mask into OptContext, for writeback to the
first output within the new function.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will allow callers to tail call to these functions
and return true indicating processing complete.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Return -1 instead of 2 for failure, so that we can
use comparisons against 0 for all cases.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than try to keep these up-to-date across folding,
re-read nb_oargs at the end, after re-reading the opcode.
A couple of asserts need dropping, but that will take care
of itself as we split the function further.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Calls are special in that they have a variable number
of arguments, and need to be able to clobber globals.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Continue splitting tcg_optimize.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
