Similar to hw_arch, each architecture defines two sourceset which are placed in
dictionaries target_arch and target_softmmu_arch. These are then picked up
from there when building the per-emulator static_library.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With Makefiles that have automatically generated dependencies, you
generated includes are set as dependencies of the Makefile, so that they
are built before everything else and they are available when first
building the .c files.
Alternatively you can use a fine-grained dependency, e.g.
target/arm/translate.o: target/arm/decode-neon-shared.inc.c
With Meson you have only one choice and it is a third option, namely
"build at the beginning of the corresponding target"; the way you
express it is to list the includes in the sources of that target.
The problem is that Meson decides if something is a source vs. a
generated include by looking at the extension: '.c', '.cc', '.m', '.C'
are sources, while everything else is considered an include---including
'.inc.c'.
Use '.c.inc' to avoid this, as it is consistent with our other convention
of using '.rst.inc' for included reStructuredText files. The editorconfig
file is adjusted.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Two temps allocated but not freed. Do enough subtractions
within a single TB and one can run out of temps entirely.
Fixes: b2167459ae ("target-hppa: Implement basic arithmetic")
Buglink: https://bugs.launchpad.net/qemu/+bug/1880287
Tested-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200720174039.517902-1-richard.henderson@linaro.org>
The PA-RISC 1.1 specification says that LDCW must be aligned mod 16
or the operation is undefined. However, real hardware only generates
an unaligned access trap for unaligned mod 4.
Match real hardware, but diagnose with GUEST_ERROR a violation of
the specification.
At the same time fix a bug in the initialization of mop, where the
size was specified twice, and another to free the zero temporary.
Tested-by: Helge Deller <deller@gmx.de>
Reported-by: Helge Deller <deller@gmx.de>
Suggested-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We currently search both the root and the tcg/ directories for tcg
files:
$ git grep '#include "tcg/' | wc -l
28
$ git grep '#include "tcg[^/]' | wc -l
94
To simplify the preprocessor search path, unify by expliciting the
tcg/ directory.
Patch created mechanically by running:
$ for x in \
tcg.h tcg-mo.h tcg-op.h tcg-opc.h \
tcg-op-gvec.h tcg-gvec-desc.h; do \
sed -i "s,#include \"$x\",#include \"tcg/$x\"," \
$(git grep -l "#include \"$x\""); \
done
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-2-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
nullify_over() calls brcond which destroys all temporaries.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190913101714.29019-3-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
nullify_over() calls brcond which destroys all temporaries.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190913101714.29019-2-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Preparation for collapsing the two byte swaps, adjust_endianness and
handle_bswap, along the I/O path.
Target dependant attributes are conditionalized upon NEED_CPU_H.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <81d9cd7d7f5aaadfa772d6c48ecee834e9cf7882.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Prior patch resets can_do_io flag at the TB entry. Therefore there is no
need in resetting this flag at the end of the block.
This patch removes redundant gen_io_end calls.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <156404429499.18669.13404064982854123855.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@gmail.com>
These instructions are present on pcxl and pcxl2 machines,
and are used by NetBSD and OpenBSD. See
https://parisc.wiki.kernel.org/images-parisc/a/a9/Pcxl2_ers.pdf
page 13-9 (195/206)
Signed-off-by: Nick Hudson <skrll@netbsd.org>
Message-Id: <20190423063621.8203-2-nick.hudson@gmx.co.uk>
[rth: Use extending loads, locally managed temporaries.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In order to handle TB's that translate to too much code, we
need to place the control of the length of the translation
in the hands of the code gen master loop.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Within a delay slot, we were squishing both DISAS_IAQ_N_STALE and
DISAS_IAQ_N_STALE_EXIT to DISAS_IAQ_N_UPDATED. This lost the
required exit to the main loop, and could result in interrupts
never being delivered.
Tested-by: Sven Schnelle <svens@stackframe.org>
Reported-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The current code assumes that we don't need to exit the TB
if a Data Cache Flush or Insert has happend. However, as we
have a shared Data/Instruction TLB, a Data cache flush also
flushes Instruction TLB entries, and a Data cache TLB insert
might also evict a Instruction TLB entry.
So exit the TB in all cases if Instruction translation is enabled.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-11-svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-10-svens@stackframe.org>
[rth: Add required tlb flushing when prot id registers change.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
b,gate does GR[t] ← cat(GR[t]{0..29},IAOQ_Front{30..31});
instead of saving the link address to register t.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-8-svens@stackframe.org>
[rth: Move link check outside of ifndef CONFIG_USER_ONLY;
use ctx->privilege; nullify the insn earlier.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
DIAG is usually only used by diagnostics software as it's CPU
specific. In most of the cases it's better to ignore it and log
a message that it's not implemented.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-7-svens@stackframe.org>
[rth: Free the nullify condition.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When one of the source registers is the same as the destination register,
the source register gets overwritten with the destionation value before
do_add_sv() is called, which leads to unexpection condition matches.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-2-svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We got away with eliding this check when target/hppa was user-only,
but missed adding this check when adding system support.
Fixes an early crash in the HP-UX 11 installer.
Reported-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can eliminate an extra TB in this case, which merely
loads a "return address" into rn.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For priv levels 1 & 2, we were doing so from do_ibranch_priv.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It looks like the operands where exchanged. HP bootrom tests the
following sequence:
0x00000000f0004064: ldil L%-66666800,r7
0x00000000f0004068: addi 19f,r7,r7
0x00000000f000406c: addi -1,r0,rp
0x00000000f0004070: addi f,r0,r4
0x00000000f0004074: addi 1,r4,r5
0x00000000f0004078: dcor rp,r6
0x00000000f000407c: cmpb,<>,n r6,r7,0xf000411
This returned 0x66666661 instead of the expected 0x9999999f in QEMU.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190211181907.2219-6-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These conditions include the signed overflow bit. See page 5-3
of the Parisc 1.1 Architecture Reference Manual for details.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
[rth: More changes for c == 3, to compute (N^V)|Z properly.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will be fixing do_cond vs signed overflow, which requires
that do_log_cond not rely on do_cond.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that the implementation is entirely within the generated
decode function, eliminate the wrapper.
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With decodetree.py, the specializations would conflict so we
must have a single entry point for all variants of OR.
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert the BREAK instruction to start.
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of returning DisasJumpType, immediately store it.
Return true in preparation for conversion to the decodetree script.
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do the cast to uintptr_t within the helper, so that the compiler
can type check the pointer argument. We can also do some more
sanity checking of the index argument.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While at it, use int for both num_insns and max_insns to make
sure we have same-type comparisons.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Drop TCGV_PTR_TO_NAT and TCGV_NAT_TO_PTR internal macros.
Add tcg_temp_local_new_ptr, tcg_gen_brcondi_ptr, tcg_gen_ext_i32_ptr,
tcg_gen_trunc_i64_ptr, tcg_gen_extu_ptr_i64, tcg_gen_trunc_ptr_i32.
Use inlines instead of macros where possible.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A recent glibc change relies on the fact that the iaoq must be 3,
and computes an address based on that. QEMU had been ignoring the
priv level for user-only, which produced an incorrect address.
Reported-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
