Upcoming asynchronous handling of sub-parts of qcow2 requests will
change number of leaked clusters and even make it racy. As a
preparation, ignore leaks on failure parts in 026.
It's not trivial to just grep or substitute qemu-img output for such
thing. Instead do better: 3 is a error code of qemu-img check, if only
leaks are found. Catch this case and print success output.
Suggested-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190916175324.18478-2-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This pull request also contains the two commits from the previous pull request
that was dropped due to a mingw compilation error. The compilation should now
be fixed.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAl2coyIACgkQnKSrs4Gr
c8iE1AgAh1ACKXmuH+ml3jkKniLVpr4KEIWB5CmlMSQtmv2Hteyi+cI+T/WvhFGB
Xw8yW1yxVeV98lPWZJeb06s/Ry/ZXef+D63i6xcQzc/3a6pTJKeLdi8acbJuSRso
A3VjQaczjrP9GOPvOoy3XkXoLr5nuD4NI8TYMmhWgwb6eSETUHGYgQo1uoZkqkuF
4/K856dtN2wb3WqChdwBhg+1o8WRpxEZ74pVC0SBGtKcBDjiY7J/BEXfNJo5M4gJ
s1x3FVpSN19LYljgo4WCJt/hzMkOSy0uV4mSzCx6U/dEB+w+VUvuZ7wTt69Kweji
vTMsFDN67Xzq8xWqeiG5uGBM8NRIwQ==
=zUDj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
This pull request also contains the two commits from the previous pull request
that was dropped due to a mingw compilation error. The compilation should now
be fixed.
# gpg: Signature made Tue 08 Oct 2019 15:54:26 BST
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
iotests/262: Switch source/dest VM launch order
block: Skip COR for inactive nodes
virtio-blk: schedule virtio_notify_config to run on main context
util/ioc.c: try to reassure Coverity about qemu_iovec_init_extended
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Launching the destination VM before the source VM gives us a regression
test for HEAD^:
The guest device causes a read from the disk image through
guess_disk_lchs(). This will not work if the first sector (containing
the partition table) is yet unallocated, we use COR, and the node is
inactive.
By launching the source VM before the destination, however, the COR
filter on the source will allocate that area in the image shared between
both VMs, thus the problem will not become apparent.
Switching the launch order causes the sector to still be unallocated
when guess_disk_lchs() runs on the inactive node in the destination VM,
and thus we get our test case.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191001174827.11081-3-mreitz@redhat.com
Message-Id: <20191001174827.11081-3-mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
drop Python2 dependency in EDK2 build scripts.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEicHnj2Ae6GyGdJXLoqP9bt6twN4FAl2bPjoACgkQoqP9bt6t
wN6fOhAAzJm5IDx6w8HFqLyMhdgfBh0q/6xCNKCpbiVIpkmZeetUPb8WsKizCQQ+
uhsl6KcKErrGTorBLPUcSDaeCdaCCPOoLEZqxbCYQ1xNDjiK6pXStm+7Ztyp9KBG
e92qQEXZMjKel0toWMNMLlVVR3yY6zNkKTqBXmIYIBb+qVGFoZdwCo/9f/8KlGv1
iyN1Bl4hGRaIw/qQ9ptjctuWeE1dOm1UawXdvAi7yBUs4kuJ1nLk7MaBEueOKZHh
3KdcroJw55N5kTbHiUonRbmGHikjxicOlmpKGi7x415iec4o3pGiXR5AGcQuoJNX
lhopEG/+Eiq2IzmVUp6mYFDmvCKzt4sTnFGFkPWVuPDmJ8ym8x+D12ESrCn/tbwj
eaYBPhSi2BcEkaIblk4pj7Bma7RntVt5ga2q/2chqhSWI5X85rmW/avMgBj9y4Xo
hQVhyWKIqTuw2cFdigL9OQFzRxhPaltFQO6e/5iyjbwNZnFKwzN1OoZ2PAOK1BtZ
veoyDWsD/6YjhcOogABVlUI13rSj+M9soR++fjmMe/n+DTqpvfjPUOOmZ6PvWS9Q
zodyctKkKZau0ecq5ZoE3JfMLMSPO0XIKk46bO/cRphn5VoxC4bnEjqQ+rMbnEp+
1arIEW3m7e3Ngmvb6zUrHIL7dTtvzri9kq4vFkAskwrg8t2R0Kg=
=BE2l
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/edk2-next-20191007' into staging
Improve scripts relying on the EDK2 submodule,
drop Python2 dependency in EDK2 build scripts.
# gpg: Signature made Mon 07 Oct 2019 14:31:38 BST
# gpg: using RSA key 89C1E78F601EE86C867495CBA2A3FD6EDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (Phil) <philmd@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 89C1 E78F 601E E86C 8674 95CB A2A3 FD6E DEAD C0DE
* remotes/philmd-gitlab/tags/edk2-next-20191007:
edk2 build scripts: work around TianoCore#1607 without forcing Python 2
edk2 build scripts: honor external BaseTools flags with uefi-test-tools
roms: Add a 'make help' target alias
roms/Makefile.edk2: don't pull in submodules when building from tarball
make-release: pull in edk2 submodules so we can build it from tarballs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It turns out that forcing python2 for running the edk2 "build" utility is
neither necessary nor sufficient.
Forcing python2 is not sufficient for two reasons:
- QEMU is moving away from python2, with python2 nearing EOL,
- according to my most recent testing, the lacking dependency information
in the makefiles that are generated by edk2's "build" utility can cause
parallel build failures even when "build" is executed by python2.
And forcing python2 is not necessary because we can still return to the
original idea of filtering out jobserver-related options from MAKEFLAGS.
So do that.
While at it, cut short edk2's auto-detection of the python3.* minor
version, by setting PYTHON_COMMAND to "python3" (which we expect to be
available wherever we intend to build edk2).
With this patch, the guest UEFI binaries that are used as part of the BIOS
tables test, and the OVMF and ArmVirtQemu platform firmwares, will be
built strictly in a single job, regardless of an outermost "-jN" make
option. Alas, there appears to be no reliable way to build edk2 in an
(outer make, inner make) environment, with a jobserver enabled.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Reported-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190920083808.21399-3-lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Unify the recipe for "build-edk2-tools" in
"tests/uefi-test-tools/Makefile" with the recipe for "edk2-basetools" in
"roms/Makefile".
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190920083808.21399-2-lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
-fsanitize=undefined is not the same thing as --enable-sanitizers. After
commit 47c823e ("tests/docker: add sanitizers back to clang build", 2019-09-11)
test-clang is almost duplicating the asan (test-debug) test, so
partly revert commit 47c823e5b while leaving ubsan enabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Serial test is currently hard-coded to /dev/null.
On Windows, serial chardev expect a COM: device, which may not be
availble.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are just too many leaks in device-introspect-test (especially for
the plethora of arm and aarch64 boards) to make LeakSanitizer useful;
disable it for now.
Whoever is interested in debugging leaks can also use valgrind like this:
QTEST_QEMU_BINARY=aarch64-softmmu/qemu-system-aarch64 \
QTEST_QEMU_IMG=qemu-img \
valgrind --trace-children=yes --leak-check=full \
tests/device-introspect-test -p /aarch64/device/introspect/concrete/defaults/none
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some scripts check the Python version number and have two code paths to
accomodate both Python 2 and 3. Remove the code specific to Python 2 and
assert the minimum version of 3.6 instead (check skips Python tests in
this case, so the assertion would only ever trigger if a Python script
is executed manually).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Running iotests is not required to build QEMU, so we can have stricter
version requirements for Python here and can make use of new features
and drop compatibility code earlier.
This makes qemu-iotests skip all Python tests if a Python version before
3.6 is used for the build.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190909131335.16848-4-yury-kotov@yandex-team.ru>
[Reorganize check_migration_status for rebase. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=CNvl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2019-09-28' into staging
QAPI patches for 2019-09-28
# gpg: Signature made Sat 28 Sep 2019 16:18:13 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2019-09-28: (27 commits)
qapi: Improve source file read error handling
qapi: Improve reporting of redefinition
qapi: Improve reporting of missing documentation comment
qapi: Eliminate check_keys(), rename check_known_keys()
qapi: Improve reporting of invalid 'if' further
qapi: Avoid redundant definition references in error messages
qapi: Improve reporting of missing / unknown definition keys
qapi: Improve reporting of invalid flags
qapi: Improve reporting of invalid 'if' errors
qapi: Move context-free checking to the proper place
qapi: Move context-sensitive checking to the proper place
qapi: Inline check_name() into check_union()
qapi: Plumb info to the QAPISchemaMember
qapi: Make check_type()'s array case a bit more obvious
qapi: Move check for reserved names out of add_name()
qapi: Report invalid '*' prefix like any other invalid name
qapi: Use check_name_str() where it suffices
qapi: Improve reporting of invalid name errors
qapi: Reorder check_FOO() parameters for consistency
qapi: Improve reporting of member name clashes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Everybody who used something like "-machine accel=kvm:tcg" in the past
might be tempted to specify a similar list with the -accel parameter,
too, for example "-accel kvm:tcg". However, this is not how this
options is thought to be used, since each "-accel" should only take care
of one specific accelerator.
In the long run, we really should rework the "-accel" code completely,
so that it does not set "-machine accel=..." anymore internally, but
is completely independent from "-machine". For the short run, let's
make sure that users cannot use "-accel xyz:tcg", so that we avoid
that we have to deal with such cases in the wild later.
Message-Id: <20190930123505.11607-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
While at it, simplify using $(land).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190926111955.17276-3-marcandre.lureau@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Fixes: dad5ddcea3 ("check: Only test usb-ehci when it is compiled in")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fixes commit
e5758de4e8 ("tests/libqtest: Make
qtest_qmp_device_add/del independent from global_qtest")
and commit
dd21074972 ("tests/libqtest: Use
libqtest-single.h in tests that require global_qtest").
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190926111955.17276-2-marcandre.lureau@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Fix the CBAR register implementation for Cortex-A53,
Cortex-A57, Cortex-A72
* Fix direct booting of Linux kernels on emulated CPUs
which have an AArch32 EL3 (incorrect NSACR settings
meant they could not access the FPU)
* semihosting cleanup: do more work at translate time
and less work at runtime
-----BEGIN PGP SIGNATURE-----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=/0m2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190927' into staging
target-arm queue:
* Fix the CBAR register implementation for Cortex-A53,
Cortex-A57, Cortex-A72
* Fix direct booting of Linux kernels on emulated CPUs
which have an AArch32 EL3 (incorrect NSACR settings
meant they could not access the FPU)
* semihosting cleanup: do more work at translate time
and less work at runtime
# gpg: Signature made Fri 27 Sep 2019 15:32:43 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190927:
hw/arm/boot: Use the IEC binary prefix definitions
hw/arm/boot.c: Set NSACR.{CP11,CP10} for NS kernel boots
tests/tcg: add linux-user semihosting smoke test for ARM
target/arm: remove run-time semihosting checks for linux-user
target/arm: remove run time semihosting checks
target/arm: handle A-profile semihosting at translate time
target/arm: handle M-profile semihosting at translate time
tests/tcg: clean-up some comments after the de-tangling
target/arm: fix CBAR register for AArch64 CPUs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# tests/tcg/arm/Makefile.target
qapi-gen.py crashes when it can't open the main schema file, and when
it can't read from any schema file. Lazy.
Change QAPISchema.__init__() to take a file name instead of a file
object. Move the open code from _include() to __init__(), so it's
used for the main schema file, too.
Move the read into the try for good measure, and rephrase the error
message.
Reporting open or read failure for the main schema file needs a
QAPISourceInfo representing "no source". Make QAPISourceInfo cope
with fname=None.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-27-armbru@redhat.com>
Point to the previous definition, unless it's a built-in.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-26-armbru@redhat.com>
Have check_exprs() check this later, so the error message gains an "in
definition line". Tweak the error message.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-25-armbru@redhat.com>
check_if()'s errors don't point to the offending part of the
expression. For instance:
tests/qapi-schema/alternate-branch-if-invalid.json:2: 'if' condition ' ' makes no sense
Other check_FOO() do, with the help of a @source argument. Make
check_if() do that, too. The example above improves to:
tests/qapi-schema/alternate-branch-if-invalid.json:2: 'if' condition ' ' of 'data' member 'branch' makes no sense
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190927134639.4284-23-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Many error messages refer to the offending definition even though
they're preceded by an "in definition" line. Rephrase them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190927134639.4284-22-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Have check_exprs() call check_keys() later, so its error messages gain
an "in definition" line.
Both check_keys() and check_name_is_str() check the definition's name
is a string. Since check_keys() now runs after check_name_is_str()
rather than before, its check is dead. Bury it. Checking values in
check_keys() is unclean anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-21-armbru@redhat.com>
Split check_flags() off check_keys() and have check_exprs() call it
later, so its error messages gain an "in definition" line. Tweak the
error messages.
Checking values in a function named check_keys() is unclean anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-20-armbru@redhat.com>
Move check_if() from check_keys() to check_exprs() and call it later,
so its error messages gain an "in definition" line.
Checking values in a function named check_keys() is unclean anyway.
The original sin was commit 0545f6b887 "qapi: Better error messages
for bad expressions", which checks the value of key 'name'. More
sinning in commit 2cbf09925a "qapi: More rigorous checking for type
safety bypass", commit c818408e44 "qapi: Implement boxed types for
commands/events", and commit 967c885108 "qapi: add 'if' to top-level
expressions". This commit does penance for the latter. The next
commits will do penance for the others.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-19-armbru@redhat.com>
QAPISchemaCommand.check() and QAPISchemaEvent().check() check 'data'
is present when 'boxed': true. That's context-free. Move to
check_command() and check_event().
Tweak the error message while there.
check_exprs() & friends now check exactly what qapi-code-gen.txt calls
the second layer of syntax.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-18-armbru@redhat.com>
When we introduced the QAPISchema intermediate representation (commit
ac88219a6c), we took a shortcut: we left check_exprs() & friends
alone instead of moving semantic checks into the
QAPISchemaFOO.check(). The .check() assert check_exprs() did its job.
Time to finish the conversion job. Move exactly the context-sensitive
checks to the .check(). They replace assertions there. Context-free
checks stay put.
Fixes the misleading optional tag error demonstrated by test
flat-union-optional-discriminator.
A few other error message improve.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-17-armbru@redhat.com>
The checks for reserved names are spread far and wide. Move one from
add_name() to new check_defn_name_str(). This is a first step towards
collecting them all in dedicated name checking functions next to
check_name().
While there, drop the quotes around the meta-type in
check_name_str()'s error messages: "'command' uses ... name 'NAME'"
becomes "command uses ... name 'NAME'".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-13-armbru@redhat.com>
The special "does not allow optional name" error is well meant, but
confusing in practice. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-12-armbru@redhat.com>
Split check_name() into check_name_is_str() and check_name_str(), keep
check_name() as a wrapper.
Move add_name()'s call into its caller check_exprs(), and inline.
This permits delaying check_name_str() there, so its error message
gains an "in definition" line.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-10-armbru@redhat.com>
We report name clashes like this:
struct-base-clash.json: In struct 'Sub':
struct-base-clash.json:5: 'name' (member of Sub) collides with 'name' (member of Base)
The "(member of Sub)" is redundant with "In struct 'Sub'". Comes from
QAPISchemaMember.describe(). Pass info to it, so it can detect the
redundancy and avoid it. Result:
struct-base-clash.json: In struct 'Sub':
struct-base-clash.json:5: member 'name' collides with member 'name' of type 'Base'
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-8-armbru@redhat.com>
Starting error messages with a capital letter complicates things when
text can get interpolated both at the beginning and in the middle of
an error message. The next patch will do that. Switch to lower case
to keep it simpler.
For what it's worth, the GNU Coding Standards advise the message
"should not begin with a capital letter when it follows a program name
and/or file name, because that isn’t the beginning of a sentence. (The
sentence conceptually starts at the beginning of the line.)"
While there, avoid breaking lines containing multiple arguments in the
middle of an argument.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-7-armbru@redhat.com>
QAPISchemaMember.check_clash() checks for member names that map to the
same c_name(). Takes care of rejecting duplicate names.
It also checks a naming rule: no uppercase in member names. That's a
rather odd place to do it. Enforcing naming rules is
check_name_str()'s job.
qapi-code-gen.txt specifies the name case rule applies to the name as
it appears in the schema. check_clash() checks c_name(name) instead.
No difference, as c_name() leaves alone case, but unclean.
Move the name case check into check_name_str(), less the c_name().
New argument @permit_upper suppresses it. Pass permit_upper=True for
definitions (which are not members), and when the member's owner is
whitelisted with pragma name-case-whitelist.
Bonus: name-case-whitelist now applies to a union's inline base, too.
Update qapi/qapi-schema.json pragma to whitelist union CpuInfo instead
of CpuInfo's implicit base type's name q_obj_CpuInfo-base.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-6-armbru@redhat.com>
We take pains to include the offending expression in error messages,
e.g.
tests/qapi-schema/alternate-any.json:2: alternate 'Alt' member 'one' cannot use type 'any'
But not always:
tests/qapi-schema/enum-if-invalid.json:2: 'if' condition must be a string or a list of strings
Instead of improving them one by one, report the offending expression
whenever it is known, like this:
tests/qapi-schema/enum-if-invalid.json: In enum 'TestIfEnum':
tests/qapi-schema/enum-if-invalid.json:2: 'if' condition must be a string or a list of strings
Error messages that mention the offending expression become a bit
redundant, e.g.
tests/qapi-schema/alternate-any.json: In alternate 'Alt':
tests/qapi-schema/alternate-any.json:2: alternate 'Alt' member 'one' cannot use type 'any'
I'll take care of that later in this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-5-armbru@redhat.com>
If a command is disabled an error is reported. But due to usage of
error_setg() the class of the error is GenericError which does not
help callers in distinguishing this case from a case where a qmp
command fails regularly due to other reasons.
We used to use class CommandDisabled until the great error
simplification (commit de253f1491 for QMP and commit 93b91c59db for
qemu-ga, both v1.2.0).
Use CommandNotFound error class, which is close enough.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <faeb030e6a1044f0fd88208edfdb1c5fafe5def9.1567171655.git.mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Test update squashed in, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We already use semihosting for the system stuff so this is a simple
smoke test to ensure we are working OK on linux-user.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190913151845.12582-7-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These were missed in the recent de-tangling so have been updated to be
more actuate. I've also built up ARM_TESTS in a manner similar to
AARCH64_TESTS for better consistency.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190913151845.12582-2-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Despite our attempts in 4d26c7fef4 to keep this going it still gets in
the way of "make docker-test-build" completing because of course we
can't build a modern QEMU with the image. Let's put the thing out of
its misery and remove it.
People who really care about building on powerpc can still use the
binfmt_misc support to manually build an image (or just run the build
from pre this commit).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
As part of the push to drop python2 support, replace any explicit python2
dependencies with python3 versions.
For centos, python2 still exists as an implicit dependency, but by adding
python3 we will be able to build even if the configure script begins to
require python 3.5+.
Tested with centos7, fedora, ubuntu, ubuntu1804, and debian 9 (amd64).
Tested under a custom configure script that requires Python 3.5+.
the travis dockerfile is also moved to using python3, which was tested
by running `make docker-test-build@travis`, which I hope is sufficient.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190923181140.7235-7-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
debian-sid is listed as a partial image, so we cannot run tests against it.
Since it isn't used by any other testable image, remove it for now as it
is prone to bitrot.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190923181140.7235-6-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
debian-ports is listed as a partial image, so we cannot run tests against it.
Since it isn't used by any other testable image, remove it for now as it
is prone to bitrot.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190923181140.7235-5-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
There isn't a debian.dockerfile anymore,
so perform some ghost-busting.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190923181140.7235-4-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
debian8 partial base is also not consumed by any image, so remove it.
For QEMU's development cycle, we only support debian9 (stretch) and
debian10 (buster).
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190923181140.7235-3-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We don't have a debian8-mxe dockerfile anymore.
Fixes: 67bd36beda
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190923181140.7235-2-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This adds two new tests that re-use the memory test to check basic
record replay functionality is still working. We have to define our
own runners rather than using the default pattern as we want to change
the test name but re-use the memory binary.
We declare the test binaries as PHONY as they don't really exist.
[AJB: A better test would output some sort of timer value or other
otherwise variable value so we could compare the record and replay
outputs and ensure they match]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Pavel Dovgalyuk <dovgaluk@ispras.ru>
This is broadly similar to the existing fcvt test for ARM but using
the generic float testing framework. We should be able to pare down
the ARM fcvt test case to purely half-precision with or without the
Alt HP provision.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This is a generic floating point multiply and accumulate test for
single precision floating point values. I've split of the common float
functions into a helper library so additional tests can use the same
common code.
As I don't have references for all architectures I've allowed some
flexibility for tests to pass without reference files. They can be
added as we get collect them.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
