Commit Graph

518 Commits

Author SHA1 Message Date
Laszlo Ersek
07abe45c48 hw/arm: pass pristine kernel image to guest firmware over fw_cfg
Introduce the new boolean field "arm_boot_info.firmware_loaded". When this
field is set, it means that the portion of guest DRAM that the VCPU
normally starts to execute, or the pflash chip that the VCPU normally
starts to execute, has been populated by board-specific code with
full-fledged guest firmware code, before the board calls
arm_load_kernel().

Simultaneously, "arm_boot_info.firmware_loaded" guarantees that the board
code has set up the global firmware config instance, for arm_load_kernel()
to find with fw_cfg_find().

Guest kernel (-kernel) and guest firmware (-bios, -pflash) has always been
possible to specify independently on the command line. The following cases
should be considered:

nr  -bios    -pflash  -kernel  description
             unit#0
--  -------  -------  -------  -------------------------------------------
1   present  present  absent   Board code rejects this case, -bios and
    present  present  present  -pflash unit#0 are exclusive. Left intact
                               by this patch.

2   absent   absent   present  Traditional kernel loading, with qemu's
                               minimal board firmware. Left intact by this
                               patch.

3   absent   present  absent   Preexistent case for booting guest firmware
    present  absent   absent   loaded with -bios or -pflash. Left intact
                               by this patch.

4   absent   absent   absent   Preexistent case for not loading any
                               firmware or kernel up-front. Left intact by
                               this patch.

5   present  absent   present  New case introduced by this patch: kernel
    absent   present  present  image is passed to externally loaded
                               firmware in unmodified form, using fw_cfg.

An easy way to see that this patch doesn't interfere with existing cases
is to realize that "info->firmware_loaded" is constant zero at this point.
Which makes the "outer" condition unchanged, and the "inner" condition
(with the fw_cfg-related code) dead.

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-11-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 23:39:20 +00:00
Greg Bellows
c8e829b7bf target-arm: Add arm_boot_info secure_boot control
Adds the secure_boot boolean field to the arm_boot_info descriptor.  This
fields is used to indicate whether Linux should boot into secure or non-secure
state if the ARM EL3 feature is enabled.  The default is to leave the CPU in an
unaltered reset state.  On EL3 enabled systems, the reset state is secure and
can be overridden by setting the added field to false.

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-11-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 23:12:28 +00:00
Markus Armbruster
4be746345f hw: Convert from BlockDriverState to BlockBackend, mostly
Device models should access their block backends only through the
block-backend.h API.  Convert them, and drop direct includes of
inappropriate headers.

Just four uses of BlockDriverState are left:

* The Xen paravirtual block device backend (xen_disk.c) opens images
  itself when set up via xenbus, bypassing blockdev.c.  I figure it
  should go through qmp_blockdev_add() instead.

* Device model "usb-storage" prompts for keys.  No other device model
  does, and this one probably shouldn't do it, either.

* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
  blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
  which has only the BlockDriverState.

* PC87312State has an unused BlockDriverState[] member.

The next two commits take care of the latter two.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 14:02:25 +02:00
Peter Crosthwaite
6e9322dea3 arm: armv7m: Rename address_space_mem -> system_memory
This argument is a MemoryRegion and not an AddressSpace.

"Address space" means something quite different to "memory region"
in QEMU parlance so rename the variable to reduce confusion.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: f666cf7f2318d9b461b1e320a45bf0d82da9b7dd.1408347860.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-19 19:02:40 +01:00
Andreas Färber
a5c828525e i2c: Rename i2c_bus to I2CBus
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14 16:22:31 +01:00
Beniamino Galvani
db7dfd4c7e hw/arm/allwinner-a10: initialize EMAC
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-08 14:50:48 +00:00
Stefan Weil
52975c313e pxa27x: Add 'const' attribute to keyboard maps
The mapping is a hardware feature, so it is relatively constant.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-01-01 18:03:55 +04:00
Stefan Weil
f57d6693e1 pxa27x: Reduce size of keyboard matrix mapping
The row and column values use only a very limited range (-1 ... 7),
so a byte value is sufficient.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-01-01 18:03:55 +04:00
liguang
9158fa5451 hw/arm: add allwinner a10 SoC support
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1387159292-10436-5-git-send-email-lig.fnst@cn.fujitsu.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 20:12:51 +00:00
Antony Pavlov
142593c9d7 hw/arm/digic: add UART support
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1387188908-754-5-git-send-email-antonynpavlov@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 20:12:51 +00:00
Antony Pavlov
576e99cb95 hw/arm/digic: add timer support
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1387188908-754-4-git-send-email-antonynpavlov@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 20:12:51 +00:00
Antony Pavlov
c6f09eb4a0 hw/arm: add very initial support for Canon DIGIC SoC
DIGIC is Canon Inc.'s name for a family of SoC
for digital cameras and camcorders.

There is no publicly available specification for
DIGIC chips. All information about DIGIC chip
internals is based on reverse engineering efforts
made by CHDK (http://chdk.wikia.com) and
Magic Lantern (http://www.magiclantern.fm) projects
contributors.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1387188908-754-2-git-send-email-antonynpavlov@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 20:12:51 +00:00
John Rigby
0fb79851c3 hw/arm/boot: Allow boards to provide an fdt blob
If no fdt is provided on command line and the new field
get_dtb in struct arm_boot_info is set then call it to
get a device tree blob.

Signed-off-by: John Rigby <john.rigby@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-4-git-send-email-peter.maydell@linaro.org
[PMM: minor tweaks and cleanup]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:28:30 +00:00
Andreas Färber
853ca11daf pxa: Fix typo "dettach"
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-11-05 18:06:51 +01:00
Peter Maydell
b643e4b90b hw/arm/pic_cpu: Remove the now-unneeded arm_pic_init_cpu()
Now all the boards have been converted arm_pic_init_cpu()
is unused and can just be deleted.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-15-git-send-email-peter.maydell@linaro.org
2013-08-20 14:54:31 +01:00
Peter Maydell
3b1cceb8b5 arm/boot: Allow boards to modify the FDT blob
Add a callback hook in arm_boot_info to allow board models to
modify the device tree blob if they need to. (The major expected
use case is to add virtio-mmio nodes for virtio-mmio transports
that exist in QEMU but not in the hardware.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373977512-28932-7-git-send-email-peter.maydell@linaro.org
2013-07-19 12:58:47 +01:00
Peter Maydell
bd2be15003 arm: fix location of some include files
The recent rearrangement of include files had some minor errors:
 devices.h is not ARM specific and should not be in arm/
 arm.h should be in arm/

Move these two headers to correct this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15 15:16:01 +02:00
Paolo Bonzini
0d09e41a51 hw: move headers to include/
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:10 +02:00