Now that we have the redirectable Xen backend operations we can build the
PV backends even without the Xen libraries.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The same values were collected on 4 differents OpenPower systems,
palmettos, romulus and tacoma.
The SFDP table size is defined as being 0x100 bytes but it could be
bigger. Only the mandatory table for basic features is available at
byte 0x30.
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-Id: <20220722063602.128144-3-clg@kaod.org>
Message-Id: <20221013161241.2805140-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Make vhost-user-blk backwards compatible when migrating from older VMs
running with modern features turned off, the same way it was done for
virtio-blk in 20764be042 ("virtio-blk: set config size depending on the features enabled")
It's currently impossible to migrate from an older VM with
vhost-user-blk (with disable-legacy=off) because of errors like this:
qemu-system-x86_64: get_pci_config_device: Bad config data: i=0x10 read: 41 device: 1 cmask: ff wmask: 80 w1cmask:0
qemu-system-x86_64: Failed to load PCIDevice:config
qemu-system-x86_64: Failed to load virtio-blk:virtio
qemu-system-x86_64: error while loading state for instance 0x0 of device '0000:00:05.0:00.0:02.0/virtio-blk'
qemu-system-x86_64: load of migration failed: Invalid argument
This is caused by the newer (destination) VM requiring a bigger BAR0
alignment because it has to cover a bigger configuration space, which
isn't actually needed since those additional config fields are not
active (write-zeroes/discard).
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220906073111.353245-6-d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This way we can reuse it for other virtio-blk devices, e.g
vhost-user-blk, which currently does not control its config space size
dynamically.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220906073111.353245-3-d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some machines use floppy controllers via the SysBus interface,
and don't need to pull in all the SysBus code.
Extract the SysBus specific code to a new unit: fdc-sysbus.c,
and add a new Kconfig symbol: "FDC_SYSBUS".
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-6-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Some machines use floppy controllers via the SysBus interface,
and don't need to pull in all the ISA code.
Extract the ISA specific code to a new unit: fdc-isa.c, and
add a new Kconfig symbol: "FDC_ISA".
This allows us to remove the FIXME from commit dd0ff8191a
("isa: express SuperIO dependencies with Kconfig").
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-5-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
With the introduction of the nvme-subsystem device we are really
cluttering up the hw/block directory.
As suggested by Philippe previously, move the nvme emulation to hw/nvme.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Add support for namespaces formatted with protection information. The
type of end-to-end data protection (i.e. Type 1, Type 2 or Type 3) is
selected with the `pi` nvme-ns device parameter. If the number of
metadata bytes is larger than 8, the `pil` nvme-ns device parameter may
be used to control the location of the 8-byte DIF tuple. The default
`pil` value of '0', causes the DIF tuple to be transferred as the last
8 bytes of the metadata. Set to 1 to store this in the first eight bytes
instead.
Co-authored-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
To support multi-path in QEMU NVMe device model, We need to have NVMe
subsystem hierarchy to map controllers and namespaces to a NVMe
subsystem.
This patch introduced a simple nvme-subsys device model. The subsystem
will be prepared with subsystem NQN with <subsys_id> provided in
nvme-subsys device:
ex) -device nvme-subsys,id=subsys0: nqn.2019-08.org.qemu:subsys0
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
[k.jensen: added 'nqn' device parameter per request]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add more fine-grained selection by adding a CONFIG_TC58128
selector for the TC58128 eeprom.
As this device is only used by the Shix machine, add an entry
to the proper section in MAINTAINERS.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210222141514.2646278-7-f4bug@amsat.org>
This adds support for multiple namespaces by introducing a new 'nvme-ns'
device model. The nvme device creates a bus named from the device name
('id'). The nvme-ns devices then connect to this and registers
themselves with the nvme device.
This changes how an nvme device is created. Example with two namespaces:
-drive file=nvme0n1.img,if=none,id=disk1
-drive file=nvme0n2.img,if=none,id=disk2
-device nvme,serial=deadbeef,id=nvme0
-device nvme-ns,drive=disk1,bus=nvme0,nsid=1
-device nvme-ns,drive=disk2,bus=nvme0,nsid=2
The drive property is kept on the nvme device to keep the change
backward compatible, but the property is now optional. Specifying a
drive for the nvme device will always create the namespace with nsid 1.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
