Test 194 checks for 'luks' to exclude as an unsupported format,
However, most formats are unsupported, due to migration blockers.
Rather than specifying a blacklist of unsupported formats, whitelist
supported formats (specifically, qcow2, qed, raw, dmg).
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 23ca18c7f843c86a28b1529ca9ac6db4b35ca0e4.1510059970.git.jcody@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
In the "Overlapping multiple requests" cases, the 3rd reqs (the break
point B) doesn't wait for the 2nd, and once resumed the I/O will just
continue. This is because the 2nd is already waiting for the 1st, and
in wait_serialising_requests() there is:
/* If the request is already (indirectly) waiting for us, or
* will wait for us as soon as it wakes up, then just go on
* (instead of producing a deadlock in the former case). */
if (!req->waiting_for) {
/* actually break */
...
}
Consequently, the following "sleep 100; resume A" command races with the
completion of that request, and sometimes results in an unexpected
order of output:
> @@ -56,9 +56,9 @@
> wrote XXX/XXX bytes at offset XXX
> XXX bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> blkdebug: Resuming request 'B'
> +blkdebug: Resuming request 'A'
> wrote XXX/XXX bytes at offset XXX
> XXX bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> -blkdebug: Resuming request 'A'
> wrote XXX/XXX bytes at offset XXX
> XXX bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> wrote XXX/XXX bytes at offset XXX
Filter out the "Resuming request" lines to make the output
deterministic.
Reported-by: Patchew <no-reply@patchew.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20171113150026.4743-1-famz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We just fixed a few bugs that caused QEMU to crash when trying to
write to corrupted qcow2 images, and iotest 060 was expanded to test
all those scenarios.
In almost all cases the corrupted images can be repaired using
qemu-img, so this patch verifies that.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 0b1b95340ecdfbc6927e36adf2fd42ae6198747a.1510143008.git.berto@igalia.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Old-style NBD is deprecated upstream (it is documented, but no
longer implemented in the reference implementation), and it is
severely limited (it cannot support structured replies, which
means it cannot support efficient handling of zeroes), when
compared to new-style NBD. We are better off having our iotests
favor new-style everywhere (although some explicit tests,
particularly 83, still cover old-style for back-compat reasons);
this is as simple as supplying the empty string as the default
export name, as it does not change the URI needed to connect a
client to the server. This also gives us more coverage of the
just-added structured reply code, when not overriding $QEMU_NBD
to intentionally point to an older server.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20171109221216.10248-1-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
136 executes some AIO requests without a final aio_flush; then it
advances the virtual clock and thus expects the last access time of the
device to be less than the current time when queried (i.e. idle_time_ns
to be greater than 0). However, without the aio_flush, some requests
may be settled after the clock_step invocation. In that case,
idle_time_ns would be 0 and the test fails.
Fix this by adding an aio_flush if any AIO request other than some other
aio_flush has been executed.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20171109203025.27493-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
083 has (at least) two issues:
1. By launching the nbd-fault-injector in background, it may not be
scheduled until the first grep on its output file is executed.
However, until then, that file may not have been created yet -- so it
either does not exist yet (thus making the grep emit an error), or it
does exist but contains stale data (thus making the rest of the test
case work connect to a wrong address).
Fix this by explicitly overwriting the output file before executing
nbd-fault-injector.
2. The nbd-fault-injector prints things other than "Listening on...".
It also prints a "Closing connection" message from time to time. We
currently invoke sed on the whole file in the hope of it only
containing the "Listening on..." line yet. That hope is sometimes
shattered by the brutal reality of race conditions, so make the sed
script more robust.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171109203025.27493-5-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
First of all, test 055 does a valiant job of invoking pause_drive()
sometimes, but that is worth nothing without blkdebug. So the first
thing to do is to sprinkle a couple of "blkdebug::" in there -- with the
exception of the transaction tests, because the blkdebug break points
make the transaction QMP command hang (which is bad). In that case, we
can get away with throttling the block job that it effectively is
paused.
Then, 055 usually does not pause the drive before starting a block job
that should be cancelled. This means that the backup job might be
completed already before block-job-cancel is invoked; thus making the
test either fail (currently) or moot if cancel_and_wait() ignored this
condition. Fix this by pausing the drive before starting the job.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20171109203025.27493-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
040 tries to invoke pause_drive() on a drive that does not use blkdebug.
Good idea, but let's use blkdebug to make it actually work.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20171109203025.27493-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch fixes two race conditions in 030:
1. The first is in TestENOSPC.test_enospc(). After resuming the job,
querying it to confirm it is no longer paused may fail because in the
meantime it might have completed already. The same was fixed in
TestEIO.test_ignore() already (in commit
2c3b44da07).
2. The second is in TestSetSpeed.test_set_speed_invalid(): Here, a
stream job is started on a drive without any break points, with a
block-job-set-speed invoked subsequently. However, without any break
points, the job might have completed in the meantime (on tmpfs at
least); or it might complete before cancel_and_wait() which expects
the job to still exist. This can be fixed like everywhere else by
pausing the drive (installing break points) before starting the job
and letting cancel_and_wait() resume it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20171109203025.27493-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch adds a simple iotest in which we try to write to an image
with an empty refcount table (i.e. with all entries set to 0).
This scenario was already handled by the existing consistency checks,
but we add an explicit test case for completeness.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 7e48b0e2ae1a0a18e0ee303b3045f130feec0474.1509718618.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch adds a simple iotest in which we try to write to an image
with the refcount table offset set to 0.
This scenario was already handled by the existing consistency checks,
but we add an explicit test case for completeness.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: feeceada92486bb8790b90f303fc9fe82a27391a.1509718618.git.berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
qcow2_do_open() is checking that header.refcount_table_clusters is not
too large, but it doesn't check that it's greater than zero. Apart
from the fact that an image like that is obviously corrupted, trying
to use it crashes QEMU since we end up with a null s->refcount_table
after qcow2_refcount_init().
These images can however be repaired, so allow opening them if the
BDRV_O_CHECK flag is set.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: f9750f50c80359babba11062e88f5075a47e8e16.1509718618.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
If the refcount data is corrupted then we can end up trying to
allocate a new compressed cluster at offset 0 in the image, triggering
an assertion in qcow2_alloc_bytes() that would crash QEMU:
qcow2_alloc_bytes: Assertion `offset' failed.
This patch adds an explicit check for this scenario and a new test
case.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: fb53467cf48e95ff3330def1cf1003a5b862b7d9.1509718618.git.berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If the refcount data is corrupted then we can end up trying to
allocate a new L2 table at offset 0 in the image, triggering an
assertion in the qcow2 cache that would crash QEMU:
qcow2_cache_entry_mark_dirty: Assertion `c->entries[i].offset != 0' failed
This patch adds an explicit check for this scenario and a new test
case.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 92dac37191ae7844a2da22c122204eb493cc3133.1509718618.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Each entry in the qcow2 cache contains an offset field indicating the
location of the data in the qcow2 image. If the offset is 0 then it
means that the entry contains no data and is available to be used when
needed.
Because of that it is not possible to store in the cache the first
cluster of the qcow2 image (offset = 0). This is not a problem because
that cluster always contains the qcow2 header and we're not using this
cache for that.
However, if the qcow2 image is corrupted it can happen that we try to
allocate a new refcount block at offset 0, triggering this assertion
and crashing QEMU:
qcow2_cache_entry_mark_dirty: Assertion `c->entries[i].offset != 0' failed
This patch adds an explicit check for this scenario and a new test
case.
This problem was originally reported here:
https://bugs.launchpad.net/qemu/+bug/1728615
Reported-by: R.Nageswara Sastry <nasastry@in.ibm.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 92a2fadd10d58b423f269c1d1a309af161cdc73f.1509718618.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The following disk I/O throttling fixes solve recent bugs.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaCsdYAAoJEJykq7OBq3PIZdMH/10xOuxOjvjxlJNkQquhrAmD
y9dVj0jEtopdter/XR7ZCsww1UgxpIt8K43Dk1yWTKrm2bNN1v3cqemJV+UUTLFl
LppKxt5Cm1JRKaCfN0hSwOp5pFJumzH6creVdQMQ3VNCSSw6xfV94pupaVE8at6D
n4r3ZDF03ARETMJW7HY7QIFi1YVcfmi4wrx8rfhEGLZu06nHrtFQsDdH7SeErgXi
wJh+ksji4EvX2xc54nhprCsc9HdzbfeBEYx6tdD0Uh3xm7xXd2oka5Rac74WuqYu
B4aKwyFbvKZ0DYnENiOCkemTN51s+0GHLz43T92/DmQhJrBy8EU4TTCn73vgmto=
=KnUT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
The following disk I/O throttling fixes solve recent bugs.
# gpg: Signature made Tue 14 Nov 2017 10:37:12 GMT
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
qemu-iotests: Test I/O limits with removable media
block: Leave valid throttle timers when removing a BDS from a backend
block: Check for inserted BlockDriverState in blk_io_limits_disable()
throttle-groups: drain before detaching ThrottleState
block: all I/O should be completed before removing throttle timers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test hotplugs a CD drive to a VM and checks that I/O limits can
be set only when the drive has media inserted and that they are kept
when the media is replaced.
This also tests the removal of a device with valid I/O limits set but
no media inserted. This involves deleting and disabling the limits
of a BlockBackend without BlockDriverState, a scenario that has been
crashing until the fixes from the last couple of patches.
[Python PEP8 fixup: "Don't use spaces are the = sign when used to
indicate a keyword argument or a default parameter value"
--Stefan]
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 071eb397118ed207c5a7f01d58766e415ee18d6a.1510339534.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The NBD spec says that clients should not try to write/trim to
an export advertised as read-only by the server. But we failed
to check that, and would allow the block layer to use NBD with
BDRV_O_RDWR even when the server is read-only, which meant we
were depending on the server sending a proper EPERM failure for
various commands, and also exposes a leaky abstraction: using
qemu-io in read-write mode would succeed on 'w -z 0 0' because
of local short-circuiting logic, but 'w 0 0' would send a
request over the wire (where it then depends on the server, and
fails at least for qemu-nbd but might pass for other NBD
implementations).
With this patch, a client MUST request read-only mode to access
a server that is doing a read-only export, or else it will get
a message like:
can't open device nbd://localhost:10809/foo: request for write access conflicts with read-only export
It is no longer possible to even attempt writes over the wire
(including the corner case of 0-length writes), because the block
layer enforces the explicit read-only request; this matches the
behavior of qcow2 when backed by a read-only POSIX file.
Fix several iotests to comply with the new behavior (since
qemu-nbd of an internal snapshot, as well as nbd-server-add over QMP,
default to a read-only export, we must tell blockdev-add/qemu-io to
set up a read-only client).
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171108215703.9295-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Minimal implementation: for structured error only error_report error
message.
Note that test 83 is now more verbose, because the implementation
prints more warnings about unexpected communication errors; perhaps
future patches should tone things down by using trace messages
instead of traces, but the common case of successful communication
is no noisier than before.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171027104037.8319-13-eblake@redhat.com>
Apparently it would be a good idea to test that, too.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171009215533.12530-4-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Whenever the actual image size is not part of the test, it should be
filtered as it depends on the host filesystem.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171009163456.485-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tests 067 and 087 filter the actual image size because it depends on the
host filesystem (and is not part of the respective test). Since this is
generally true, we should have a common filter function for this, so
let's pull out the sed line from both tests into such a function.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171009163456.485-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170929170843.3711-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Previously, the alloc command required that input parameters be
sector-aligned and clamped to 32 bits, because the underlying
bdrv_is_allocated used a 32-bit parameter and asserted aligned
inputs. But now that we have fixed block status to report a
64-bit bytes value, and to properly round requests on behalf of
guests, we can pass any values, and can use qemu-io to add
coverage that our rounding is correct regardless of the guest
alignment constraints.
Update iotest 177 to intentionally probe block status at
unaligned boundaries as well as with a bytes value that does not
map to 32-bit sectors, which also required tweaking the image
prep to leave an unallocated portion to the image under test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a read error is encountered during 'qemu-img compare', we
were printing the "Error while reading offset ..." message twice;
this was because our helper function was awkward, printing output
on some but not all paths. Fix it to consistently report errors
on all paths, so that the callers do not risk a redundant message,
and update the testsuite for the improved output.
Further simplify the code by hoisting the conversion from an error
message to an exit code into the helper function, rather than
repeating that logic at all callers (yes, the helper function is
now less generic, but it's a net win in lines of code).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This changes test case 191 to include a backing image that has
backing_fmt set in the image file, but is referenced by node name in the
qemu command line.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
To be consistent when their _structured_ analogs will be introduced.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171012095319.136610-4-vsementsov@virtuozzo.com>
[eblake: also tweak trace message contents]
Signed-off-by: Eric Blake <eblake@redhat.com>
All scripts that use the QEMUMachine and QEMUQtestMachine classes
(device-crash-test, tests/migration/*, iotests.py, basevm.py)
already configure logging.
The basicConfig() call inside QEMUMachine.__init__() is being
kept just to make sure a script would still work if it didn't
configure logging.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171005172013.3098-4-ehabkost@redhat.com>
Reviewed-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Set up Python logging module instead of relying on
QEMUMachine._debug to enable debugging messages.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170927130339.21444-3-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
do_run_qemu() in iotest 195 first applies _filter_imgfmt when printing
qemu's command line and _filter_testdir only afterwards. Therefore, if
the image format is part of the test directory path, _filter_testdir
will no longer apply and the actual output will differ from the
reference output even in case of success.
For example, TEST_DIR might be "/tmp/test-qcow2", in which case
_filter_imgfmt first transforms this to "/tmp/test-IMGFMT" which is no
longer recognized as the TEST_DIR by _filter_testdir.
Fix this by not applying _filter_imgfmt in do_run_qemu() but in
run_qemu() instead, and only after _filter_testdir.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170927211334.3988-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a test for qcow2 copy-on-read behavior, including exposure
for the just-fixed bugs.
The copy-on-read behavior is always to a qcow2 image, but the
test is careful to allow running with most image protocol/format
combos as the backing file being copied from (luks being the
exception, as it is harder to pass the right secret to all the
right places). In fact, for './check nbd', this appears to be
the first time we've had a qcow2 image wrapping NBD, requiring
an additional line in _filter_img_create to match the similar
line in _filter_img_info.
Invoking blkdebug to prove we don't write too much took some
effort to get working; and it requires that $TEST_WRAP (based
on $TEST_DIR) not be subject to word splitting. We may decide
later to have the entire iotests suite use relative rather than
absolute names, to avoid problems inherited by the absolute
name of $PWD or $TEST_DIR, at which point the sanity check in
this commit could be simplified.
This test requires at least 2G of consecutive memory to succeed;
as such, it is prone to spurious failures, particularly on
32-bit machines under load. This situation is detected and
triggers an early exit to skip the test, rather than a failure.
To manually provoke this setup on a beefier machine, I used:
$ (ulimit -S -v 1000000; ./check -qcow2 197)
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Executing qemu with a terminal as stdin will temporarily alter stty
settings on that terminal (for example, disabling echo), because of
how we run both the monitor and any multiplexing with guest input.
Normally, qemu restores the original settings on exit; but if an
iotest triggers qemu to abort in the middle, we can be left with
the altered terminal setup. This can make life very annoying when
debugging an iotest failure (not everyone remembers the trick of
blind-typing 'stty sane' without echo, and some people prefer
terminal settings that are slightly different than the defaults
picked by 'stty sane').
It is possible to avoid qemu corrupting the terminal by not passing
a terminal to qemu's stdin in the first place (as in, use
'./check ... </dev/null'), but that's extra typing to have to
remember. But running 'exec </dev/null' in the harness seems like
it might be too heavy of a hammer. So I instead went the the
solution of saving and restoring the stty settings, only when the
harness detects that it is run interactively.
I tested this patch by forcing an allocation failure (I can't
guarantee that this particular limit will work on all setups, but
it shows the idea):
$ (ulimit -S -v 500000; ./check -qcow2 1)
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We don't need to make any assumptions about the graph layout above the
top node of the commit operation any more. Remove the use of
bdrv_find_overlay() and related variables from the commit job code.
bdrv_drop_intermediate() doesn't use the 'active' parameter any more, so
we can just drop it.
The overlay node was previously added to the block job to get a
BLK_PERM_GRAPH_MOD. We really need to respect those permissions in
bdrv_drop_intermediate() now, but as long as we haven't figured out yet
how BLK_PERM_GRAPH_MOD is actually supposed to work, just leave a TODO
comment there.
With this change, it is now possible to perform another block job on an
overlay node without conflicts. qemu-iotests 030 is changed accordingly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
QMP responses to certain commands can become quite long, which doesn't
only make reading them hard, but also means that the maximum line length
in patch emails can be exceeded. Allow tests to switch to QMP pretty
printing, which results in more, but shorter lines.
We also need to make sure to keep indentation in the response for this
to work as expected.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
"check" is full of qemu-iotests--specific details. Separating it
from "common" does not make much sense anymore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The variable is almost unused, and one of the two uses is actually
uninitialized.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The variable is used in "common" but defined only after the file
is sourced.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Split "check" parts from tests part.
For the directory setup, the actual computation of directories goes
in "check", while the sanity checks go in the tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It only provides functions used by the test programs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These are never used by "check", with one exception that does not need
$QEMU_OPTIONS. Keep them in common.rc, which will be soon included only
by the tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of ./check failing when a binary is missing, we try each test
case now and each one fails with tons of test case diffs. Also, all the
variables were initialized by "check" prior to "common" being sourced,
and then (uselessly) checked for emptiness again in "check".
Centralize the search for programs in "common" (which will soon be
one with "check"), including the "realpath" invocation which can be done
just once in "check" rather than in the tests.
For qnio_server, move the detection to "common", simplifying
set_prog_path to stop handling the unused second argument, and
embedding the "realpath" pass.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some functions in common.rc are never used by the tests. Move
them out of that file and into common, which is already included
only by "check".
Code that actually *is* common to "check" and tests can be placed in
common.config.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This includes shell function, shell variables and command line options
(randomize.awk does not exist).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that we have adjusted the majority of the calls this function
makes to be byte-based, it is easier to read the code if it makes
passes over the image using bytes rather than sectors.
iotests 165 was rather weak - on a default 64k-cluster image, where
bitmap granularity also defaults to 64k bytes, a single cluster of
the bitmap table thus covers (64*1024*8) bits which each cover 64k
bytes, or 32G of image space. But the test only uses a 1G image,
so it cannot trigger any more than one loop of the code in
store_bitmap_data(); and it was writing to the first cluster. In
order to test that we are properly aligning which portions of the
bitmap are being written to the file, we really want to test a case
where the first dirty bit returned by bdrv_dirty_iter_next() is not
aligned to the start of a cluster, which we can do by modifying the
test to write data that doesn't happen to fall in the first cluster
of the image.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170918124230.8152-5-pbutsykin@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The flag is additional precaution against data loss. Perhaps in the future the
operation shrink without this flag will be blocked for all formats, but for now
we need to maintain compatibility with raw.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170918124230.8152-2-pbutsykin@virtuozzo.com
[mreitz: Added a missing space to a warning]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Migration capabilities should be enabled on both source and
destination qemu processes.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This involves a temporary read-write reopen if the backing file link in
the middle of a backing file chain should be changed and is therefore a
good test for the latest bdrv_reopen() vs. op blockers fixes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
