There two entries of INDEX_op_ld_i64 in the ppc_op_defs. That causes an
assertion failure in tcg_add_target_add_op_defs() when --enable-debug is
used on a ppc64 backend (that's ppc64 host, not target).
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: malc <av1474@comtv.ru>
This allows us to actually supply a function name in softmmu builds;
gdb doesn't pick up the minimal symbol table otherwise. Also add a
bit of documentation and statically generate more of the ELF image.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This allows us to generate unwind info for the dynamicly generated
code in the code_gen_buffer. Only i386 is converted at this point.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Optionally, make memory access helpers take a parameter for CPUState
instead of relying on global env.
On most targets, perform simple moves to reorder registers. On i386,
switch from regparm(3) calling convention to standard stack-based
version.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use stack based calling convention (GCC default) for interfacing with
generated code instead of register based convention (regparm(3)).
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
next_tb is the numeric value of a tcg target (= QEMU host) address.
Using tcg_target_ulong instead of unsigned long shows this and makes
the code portable for hosts with an unusual size of long (w64).
The type cast '(long)(next_tb & ~3)' was not needed (casting
unsigned long to long does not change the bits, and nor does
casting long to pointer for most (= all non w64) hosts.
It is removed here.
Macro or function tcg_qemu_tb_exec is used to set next_tb.
The function also returns next_tb. Therefore tcg_qemu_tb_exec
must return a tcg_target_ulong.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
An attempt to allocate a large memory chunk after a small one resulted in
circular links in list of pools. It caused the same memory being
allocated twice for different arrays.
Now pools for large memory chunks are kept in separate list and are
freed during pool reset because current allocator can not reuse them.
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Scripted conversion:
for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
sed -i "s/CPUState/CPUArchState/g" $file
done
All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
tcg_out_label is always called with a third argument of pointer type
which was casted to tcg_target_long.
These casts can be avoided by changing the prototype of tcg_out_label.
There was also a cast to long. For most hosts with
sizeof(long) == sizeof(tcg_target_long) == sizeof(void *) this did not
matter, but for w64 it was wrong. This is fixed now.
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The TCG targets i386 and tci needed a change of the function
prototype for w64.
This change is currently not needed for the other TCG targets,
but it can be applied to avoid code differences.
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
flush_icache_range takes two address parameters which must be large
enough to address any address of the host.
For hosts with sizeof(unsigned long) == sizeof(void *), this patch
changes nothing. All currently supported hosts fall into this category.
For w64 hosts, sizeof(unsigned long) is 4 while sizeof(void *) is 8,
so the use of tcg_target_ulong is needed for i386 and tci (the tcg
targets which work with w64).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This change makes tcg_target_ulong available in tcg-target.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The standard include files are already included in qemu-common.h.
malloc.h and alloca.h were needed for alloca() which was removed
from TCG code some years ago when switching from dyngen to TCG
(see commit 49516bc0d6).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
ARM still doesn't support 16GB buffers in 32-bit modes, replace the
16GB by 16MB in the comment.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
On ARM, in Thumb mode r7 is used for the framepointer; this meant
that we would fail to compile in debug mode because we were using r7
for TCG_AREG0. Shift to r6 instead to avoid this clash.
(Bug reported as LP:870990.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
On ARM, don't map the code buffer at a fixed location, and fix up the
call/goto tcg routines to let it do long jumps.
Mapping the code buffer at a fixed address could sometimes result in it being
mapped over the top of the heap with pretty random results.
Signed-off-by: Dr. David Alan Gilbert <david.gilbert@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Make tcg_const_ptr() include a cast so that you can pass it a
pointer. This allows us to drop the casts we had in all the places
that use this macro.
Acked-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
TCG_TARGET_REG_BITS is declared in tcg.h for all TCG targets.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This is standard for other tcg targets and improves tci, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In both cases, val is computed, but then not used in the
subsequent line, which then re-computes the quantity in
a different type (int32_t vs unsigned long).
Keep the computation type that's been working so far.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 's390-1.0' of git://repo.or.cz/qemu/agraf:
s390x: initialize virtio dev region
tcg: Use TCGReg for standard tcg-target entry points.
tcg: Standardize on TCGReg as the enum for hard registers
s390x: Add shutdown for TCG s390-virtio machine
s390: Fix cpu shutdown for KVM
s390: fix short kernel command lines
s390: fix reset hypercall to reset the status
s390x: implement SIGP restart and shutdown
s390x: implement rrbe instruction properly
s390x: update R and C bits in storage key
s390x: make ipte 31-bit aware
s390x: add ldeb instruction
Including tcg_out_ld, tcg_out_st, tcg_out_mov, tcg_out_movi.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Most targets did not name the enum; tci used TCGRegister.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
tcg/ppc64/tcg-target.c has a couple of places where variables are set
unconditionally, but otherwise used only for softmmu builds, not
userspace only builds. This causes compiler warnings (which are fatal
by default) when compiling for a ppc64 host with gcc 4.6. This patch
fixes the problem by moving the code which defines and sets the
variables into the CONFIG_SOFTMMU guarded regions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
* 'tci' of git://qemu.weilnetz.de/qemu:
tcg: Add tcg interpreter to configure / make
tcg: Add tci disassembler
tcg: Add interpreter for bytecode
tcg: Add bytecode generator for tcg interpreter
tcg: Make ARRAY_SIZE(tcg_op_defs) globally available
tcg: TCG targets may define tcg_qemu_tb_exec
The error being caused by the failure to copy the other half of
the input to the output after having narrowed the deposit operation.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: malc <av1474@comtv.ru>
Unlike other tcg target code generators, this one does not generate
machine code for some cpu. It generates machine independent bytecode
which is interpreted later.
This allows running QEMU on any host.
Interpreted bytecode is slower than direct execution of generated
machine code.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
tcg_op_defs was already a global array.
The tci disassembler also needs ARRAY_SIZE(tcg_op_defs),
so add a new global constant with this value.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Targets may use a non standard definition of tcg_tb_exec
by defining this macro in their tcg_target.h.
This is used here by ppc. It will be used by the TCG interpreter, too.
Cc: malc <av1474@comtv.ru>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
If the deposit replaces the entire word, optimize to a move.
If we're inserting to the top of the word, avoid the mask of arg2
as we'll be shifting out all of the garbage and shifting in zeros.
If the host is 32-bit, reduce a 64-bit deposit to a 32-bit deposit
when possible.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Remove the unused function tcg_out_addi() from the s390 TCG backend;
this brings it into line with other backends.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Remove the unused function tcg_out_addi() from the ia64 TCG backend;
this brings it into line with other backends.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
x86 cannot provide an optimized generic deposit implementation. But at
least for a few special cases, namely for writing bits 0..7, 8..15, and
0..15, versions using only a single instruction are feasible.
Introducing such limited support improves emulating 16-bit x86 code on
x86, but also rarer cases where 32-bit or 64-bit code accesses bytes or
words.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Remove the unused function tcg_out_addi() from the ARM TCG backend;
this fixes a compilation failure on ARM hosts with newer gcc.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These functions are defined in the tcg target specific file
tcg-target.c.
The forward declarations assert that every tcg target uses
the same function prototype.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
It is now declared for all tcg targets in tcg.h,
so the tcg target specific declarations are redundant.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
TCG_TARGET_REG_BITS can be determined by the compiler,
so there is no need to declare it for each individual tcg target.
This is especially important for new tcg targets
which will be supported by the tcg interpreter.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The second register is only needed for 32 bit hosts.
Cc: Vassili Karpov <av1474@comtv.ru>
Fine-with-me'd-by: Vassili Karpov <av1474@comtv.ru>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The second register is only needed for 32 bit hosts.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The second register is only needed for 32 bit hosts.
Cc: Alexander Graf <agraf@suse.de>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The second register is never used for ia64 hosts.
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
