Implement the VIRTIO 1.0 virtio-pci interface. The main change here is
that the register layout is no longer a fixed layout in BAR 0. Instead
we have to iterate of PCI Capabilities to find descriptions of where
various registers are located. The vring registers are also more
fine-grained, allowing for more flexible vring layouts, but we don't
take advantage of that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20191023100425.12168-17-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
The current libqos virtio-pci.c code implements the VIRTIO Legacy
interface. Extract existing code in preparation for VIRTIO 1.0 support.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191023100425.12168-16-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Legacy virtio-pci interface always uses BAR 0. VIRTIO 1.0 may need
to use a different BAR index, so make it configurable.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191023100425.12168-15-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VIRTIO 1.0 code will need to perform additional steps but it will
reuse the common virtqueue setup/cleanup code. Make these functions
public.
Make sure to invoke callbacks via QVirtioBus instead of directly calling
the virtio-pci Legacy versions of these functions.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191023100425.12168-14-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The MSI-X vectors are programmed differently in the VIRTIO 1.0 and
Legacy interfaces. Introduce callbacks so different implementations can
be used depending on the interface version.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191023100425.12168-13-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of just passing the vring page frame number, pass the full
QVirtQueue. This will allow the VIRTIO 1.0 transport to program the
fine-grained vring address registers in the future.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191023100425.12168-12-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO 1.0 uses little-endian for the vring. Legacy VIRTIO uses guest
endianness. Adjust the code to handle both.
Note that qvirtio_readq() is not defined because it has no users. All
the other accessors are really needed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191023100425.12168-10-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In VIRTIO 1.0 feature bits changed from 32-bit to 64-bit. (In fact, the
transports allow even more feature bits but nothing uses more than 64
bits today.)
Add 64-bit feature bit support to virtio-mmio and virtio-pci. This will
be necessary for VIRTIO 1.0 support.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191023100425.12168-4-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Library functions should not rely on functions that require global_qtest
(since they might get used in tests that deal with multiple states).
Commit 1999a70a05 ("Make generic virtio code independent from
global_qtest") already tried to clean the libqos virtio code, but I
missed to replace the clock_step() function. Thus change it now to
qtest_clock_step() instead.
The logic of the qvirtio_wait_config_isr() function is now pushed
to the virtio-mmio.c and virtio-pci.c files instead, since we can
get the QTestState here easily.
Message-Id: <20190904130047.25808-4-thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The libqos library functions should never depend on global_qtest,
since these functions might be used in tests that track multiple
test states. So let's use the test state of the QPCIDevice instead.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190813093047.27948-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Library functions should not depend on global_qtest functions like
writew() and writeq(), so that they can also be used in tests that
deal with multiple QTestStates at the same time (like migration tests).
Message-Id: <20190515174328.16361-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove the qvirtio_pci_device_find* and qvirtio_pci_device_free
APIs, now that they do not have any users.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add QOSGraphObject to QVirtioPCIDevice structure, with a basic
constructor. virtio-pci is not present in qgraph, since it
will be used as starting point by its subclasses (virtio-*-pci)
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
dev could be NULL if the PCI device can not be found due to some
reasons, so we must not dereference the pointer in this case.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1519713884-2346-1-git-send-email-thuth@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use qvirtio_pci_device_find_slot() to avoid leaking the non-hp
device. Add assert() to avoid further leaks in the future.
Use qvirtio_pci_device_free() to correctly free QVirtioPCIDevice.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Allow specifying which slot to look for the device.
This will be used in the following patch to avoid leaking when multiple
devices exists and we want to lookup the hotplug one.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The usual use model for the libqos PCI functions is to map a specific PCI
BAR using qpci_iomap() then pass the returned token into IO accessor
functions. This, and the fact that iomap() returns a (void *) which
actually contains a PCI space address, kind of suggests that the return
value from iomap is supposed to be an opaque token.
..except that the callers expect to be able to add offsets to it. Which
also assumes the compiler will support pointer arithmetic on a (void *),
and treat it as working with byte offsets.
To clarify this situation change iomap() and the IO accessors to take
a definitely opaque BAR handle (enforced with a wrapper struct) along with
an offset within the BAR. This changes both the functions and all the
callers.
There were a number of places that checked if iomap() returned non-NULL,
and or initialized it to NULL before hand. Since iomap() already assert()s
if it fails to map the BAR, these tests were mostly pointless and are
removed.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Currently the libqos PCI layer includes accessor helpers for 8, 16 and 32
bit reads and writes. It's likely that we'll want 64-bit accesses in the
future (plenty of modern peripherals will have 64-bit reigsters). This
adds them.
For PIO (not MMIO) accesses on the PC backend, this is implemented as two
32-bit ins or outs. That's not ideal but AFAICT x86 doesn't have 64-bit
versions of in and out.
This patch also converts the single current user of 64-bit accesses -
virtio-pci.c to use the new mechanism, rather than a sequence of 8 byte
reads.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
The 'addr' parameter to qvirtio_config_read*() doesn't have a consistent
meaning: when using the virtio-pci versions, it's a full PCI space address,
but for virtio-mmio, it's an offset from the device's base mmio address.
This means that the callers need to do different things to calculate the
addresses in the two cases, which rather defeats the purpose of function
pointer backends.
All the current users of these functions are using them to retrieve
variables from the device specific portion of the virtio config space.
So, this patch alters the semantics to always be an offset into that
device specific config area.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
but disable MSI-X tests on SPAPR as we can't check the result
(the memory region used on PC is not readable on SPAPR).
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move the definition to libqos/virtio.h as it must be used
only with virtio functions.
Add a QVirtioDevice parameter as it will be needed to
know if the virtio device is using virtio 1.0 specification
and thus is always little-endian (to do)
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This allows to not have to pass bus and device for every virtio functions.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[dwg: Fix style nit]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The target endianness is not deduced anymore from
the architecture name but asked directly to the guest,
using a new qtest command: "endianness". As it can't
change (this is the value of TARGET_WORDS_BIGENDIAN),
we store it to not have to ask every time we want to
know if we have to byte-swap a value.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
CC: Greg Kurz <groug@kaod.org>
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
qvirtqueue_setup() allocates the vring and virtqueue state. So far
there has been no function to free it. Callers have been using
guest_free() for the vring but forgot to free the QVirtQueue state.
This patch solves the memory leak by introducing qvirtqueue_cleanup().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Note that virtio_ring.h defines feature bits using their bit number:
#define VIRTIO_RING_F_INDIRECT_DESC 28
On the other hand libqos virtio.h uses the bit mask:
#define QVIRTIO_F_RING_INDIRECT_DESC 0x10000000
The patch makes the necessary adjustments.
I have used "1u << BITMASK" instead of "1ULL << BITMASK" because the
64-bit feature fields are not implemented in libqos virtio.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1462798061-30382-5-git-send-email-stefanha@redhat.com
Remove glib.h includes, as it is provided by osdep.h.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
The MSIX interrupt was always acked without checking its value, which caused a
race condition. If the ISR was raised between the read and the acking, the ISR
was never detected and it timed out.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Message-id: 1424795655-16952-1-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convert PCI-specific constants names of libqos virtio driver.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424812915-25728-4-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convert use of pointers in functions of virtio to uint64_t in order to make it
platform-independent.
Add casting from pointers (in PCI functions) to uint64_t and vice versa through
uintptr_t.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424812915-25728-2-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Added avail_event and NO_NOTIFY check before notifying.
Added used_event setting.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Added MSI-X support for qtest PCI.
Added MSI-X support for virtio-pci.
Added MSI-X test case in virtio-blk-test.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add functions necessary for working with indirect descriptors.
Add test using new functions.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add status changing and feature negotiation.
Add basic virtqueue support for adding and sending virtqueue requests.
Add ISR checking.
[Squashed request endianness fix by Greg Kurz <gkurz@linux.vnet.ibm.com>
--Stefan]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add functions to read and write virtio header fields.
Add status bit setting in virtio-blk-device.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Virtio header has been changed to compile and work with a real device.
Functions bus_foreach and device_find have been implemented for PCI.
Virtio-blk test case now opens a fake device.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
