Since we neglect to document the argument of query-rocker and
query-rocker-ports, their description in the QEMU QMP Reference manual
is "Not documented". Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240911112545.2248881-7-armbru@redhat.com>
Since we neglect to document a member of PciMemoryRegion, its
description in the QEMU QMP Reference manual is "Not documented". Fix
that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240911112545.2248881-6-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Since we neglect to document the members of JSONType, their
description in the QEMU QMP Reference manual is "Not documented". Fix
that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240911112545.2248881-5-armbru@redhat.com>
Since we neglect to document the members of QCryptoAkCipherKeyType,
their description in the QEMU QMP Reference manual is "Not
documented". Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240911112545.2248881-4-armbru@redhat.com>
Since we neglect to document the members of GrabToggleKeys, their
description in the QEMU QMP Reference manual is "Not documented". Fix
that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240911112545.2248881-3-armbru@redhat.com>
Since we neglect to document several members of ChardevBackendKind,
their description in the QEMU QMP Reference manual is "Not
documented". Fix that, and improve the existing member documentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240911112545.2248881-2-armbru@redhat.com>
Added configuration for RISC-V 64-bit target to the build system.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-18-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Added implementations for 'set_mcontext' and 'get_ucontext_sigreturn'
functions for RISC-V architecture,
Both functions ensure that the CPU state and user context are properly
managed.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Co-authored-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-17-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Added the 'get_mcontext' function to extract and populate
the RISC-V machine context from the CPU state.
This function is used to gather the current state of the
general-purpose registers and store it in a 'target_mcontext_'
structure.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Co-authored-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-16-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Added functions for setting up the RISC-V signal trampoline and signal
frame:
'set_sigtramp_args()': Configures the RISC-V CPU state with arguments
for the signal handler. It sets up the registers with the signal
number,pointers to the signal info and user context, the signal handler
address, and the signal frame pointer.
'setup_sigframe_arch()': Initializes the signal frame with the current
machine context.This function copies the context from the CPU state to
the signal frame, preparing it for the signal handler.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Co-authored-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-15-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Added definitions for RISC-V signal handling, including structures
and constants for managing signal frames and context
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Co-authored-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-14-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Added a generic definition for RISC-V64 target-specific details.
Implemented the 'regpairs_aligned' function,which returns 'false'
to indicate that register pairs are not aligned in the RISC-V64 ABI.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-13-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Introduced definitions for the RISC-V system call interface, including
the 'target_pt_regs' structure that outlines the register storage
layout during a system call.
Added constants for hardware machine identifiers.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Co-authored-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-12-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Added definitions for RISC-V VM parameters, including maximum and
default sizes for text, data, and stack, as well as address space
limits.
Implemented helper functions for retrieving and setting specific
values in the CPU state, such as stack pointer and return values.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-11-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Implemented functions for setting up and initializing threads in the
RISC-V architecture.
The 'target_thread_set_upcall' function sets up the stack pointer,
program counter, and function argument for new threads.
The 'target_thread_init' function initializes thread registers based on
the provided image information.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Co-authored-by: Jessica Clarke <jrtc27@jrtc27.com>
Co-authored-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-10-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Added the 'do_freebsd_arch_sysarch' function to emulate the 'sysarch'
system call for the RISC-V architecture.
Currently, this function returns '-TARGET_EOPNOTSUPP' to indicate that
the operation is not supported.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-9-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Implemented the 'setup_sigtramp' function for setting up the signal
trampoline code in the RISC-V architecture.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-8-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Added definitions for RISC-V register structures, including
general-purpose registers and floating-point registers, in
'target_arch_reg.h'. Implemented the 'target_copy_regs' function to
copy register values from the CPU state to the target register
structure, ensuring proper endianness handling using 'tswapreg'.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-7-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Introduced RISC-V specific ELF definitions and hardware capability
detection.
Additionally, a function to retrieve hardware capabilities
('get_elf_hwcap') is implemented, which returns the common bits set in
each CPU's ISA strings.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Co-authored-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-6-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Included the prototype for the 'target_cpu_set_tls' function in the
'target_arch.h' header file. This function is responsible for setting
the Thread Local Storage (TLS) register for RISC-V architecture.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-5-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Added functions for cloning CPU registers and resetting the CPU state
for RISC-V architecture.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-4-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Implemented the RISC-V CPU execution loop, including handling various
exceptions and system calls. The loop continuously executes CPU
instructions,processes exceptions, and handles system calls by invoking
FreeBSD syscall handlers.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Co-authored-by: Jessica Clarke <jrtc27@jrtc27.com>
Co-authored-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-3-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Added the initial implementation for RISC-V CPU initialization and main
loop. This includes setting up the general-purpose registers and
program counter based on the provided target architecture definitions.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Co-authored-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-2-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The IMSIC state variable eistate[] is modified by CSR instructions
within a range dedicated to the local CPU and by MMIO writes from any CPU.
Access to eistate from MMIO accessors is protected by the BQL, but
read-modify-write (RMW) sequences from CSRRW do not acquire the BQL,
making the RMW sequence vulnerable to a race condition with MMIO access
from a remote CPU.
This race can manifest as missing IPI or MSI in multi-CPU systems, eg:
[ 43.008092] watchdog: BUG: soft lockup - CPU#2 stuck for 27s! [kworker/u19:1:52]
[ 43.011723] CPU: 2 UID: 0 PID: 52 Comm: kworker/u19:1 Not tainted 6.11.0-rc6
[ 43.013070] Workqueue: events_unbound deferred_probe_work_func
[ 43.018776] [<ffffffff800b4a86>] smp_call_function_many_cond+0x190/0x5c2
[ 43.019205] [<ffffffff800b4f28>] on_each_cpu_cond_mask+0x20/0x32
[ 43.019447] [<ffffffff8001069a>] __flush_tlb_range+0xf2/0x190
[ 43.019683] [<ffffffff80010914>] flush_tlb_kernel_range+0x20/0x28
The interrupt line raise/lower sequence was changed to prevent a race
between the evaluation of the eistate and the execution of the qemu_irq
raise/lower, ensuring that the interrupt line is not incorrectly
deactivated based on a stale topei check result. To avoid holding BQL
all modifications of eistate are converted to atomic operations.
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <a7604e4d61068ca4d384ae2a1377e1521d4d0235.1725651699.git.tjeznach@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If QEMU has been configured with "--without-default-devices", the build
is currently failing with:
/usr/bin/ld: libqemu-riscv32-softmmu.a.p/target_riscv_cpu_helper.c.o:
in function `riscv_cpu_do_interrupt':
.../qemu/target/riscv/cpu_helper.c:1678:(.text+0x2214): undefined
reference to `do_common_semihosting'
We always want semihosting to be enabled if TCG is available, so change
the "imply" statements in the Kconfig file to "select", and make sure to
avoid calling into do_common_semihosting() if TCG is not available.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240906094858.718105-1-thuth@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
C doesn't extend the sign bit for unsigned types since there isn't a
sign bit to extend. This means a promotion of a u32 to a u64 results
in the upper 32 bits of the u64 being zero. If that result is then
used as a mask on another u64 the upper 32 bits will be cleared. rv32
physical addresses may be up to 34 bits wide, so we don't want to
clear the high bits while page aligning the address. The fix is to
use hwaddr for the mask, which, even on rv32, is 64-bits wide.
Fixes: af3fc195e3 ("target/riscv: Change the TLB page size depends on PMP entries.")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240909083241.43836-2-ajones@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Svvptc extension describes a uarch that does not cache invalid TLB
entries: that's the case for qemu so there is nothing particular to
implement other than the introduction of this extension.
Since qemu already exposes Svvptc behaviour, let's enable it by default
since it allows to drastically reduce the number of sfence.vma emitted
by S-mode.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240828083651.203861-1-alexghiti@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When riscv_load_firmware() loads an ELF, the ELF segment addresses are
used, not the passed-in firmware_load_addr. The machine models assume
the firmware entry point is what they provided for firmware_load_addr,
and use that address to generate the boot ROM, so if the ELF is linked
at any other address, the boot ROM will jump to empty memory.
Pass back the ELF entry point to use when generating the boot ROM, so
the boot ROM can jump to firmware loaded anywhere in RAM. For example,
on the virt machine, this allows using an OpenSBI fw_dynamic.elf built
with FW_TEXT_START values other than 0x80000000.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240817002651.3209701-1-samuel.holland@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to RISC-V Debug specification, the optional textra32 and
textra64 trigger CSRs can be used to configure additional matching
conditions for the triggers. For example, if the textra.MHSELECT field
is set to 4 (mcontext), this trigger will only match or fire if the low
bits of mcontext/hcontext equal textra.MHVALUE field.
This commit adds the aforementioned matching condition as common trigger
matching conditions. Currently, the only legal values of textra.MHSELECT
are 0 (ignore) and 4 (mcontext). When textra.MHSELECT is 0, we pass the
checking. When textra.MHSELECT is 4, we compare textra.MHVALUE with
mcontext CSR. The remaining fields, such as textra.SBYTEMASK,
textra.SVALUE, and textra.SSELECT, are hardwired to zero for now. Thus,
we skip checking them here.
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240826024657.262553-3-alvinga@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit allows program to write textra trigger CSR for type 2, 3, 6
triggers. In this preliminary patch, the textra.MHVALUE and the
textra.MHSELECT fields are allowed to be configured. Other fields, such
as textra.SBYTEMASK, textra.SVALUE, and textra.SSELECT, are hardwired to
zero for now.
For textra.MHSELECT field, the only legal values are 0 (ignore) and 4
(mcontext). Writing 1~3 into textra.MHSELECT will be changed to 0, and
writing 5~7 into textra.MHSELECT will be changed to 4. This behavior is
aligned to RISC-V SPIKE simulator.
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240826024657.262553-2-alvinga@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
build fails on musl libc (alpine linux) with this error:
../util/cpuinfo-riscv.c: In function 'cpuinfo_init':
../util/cpuinfo-riscv.c:63:21: error: '__NR_riscv_hwprobe' undeclared (first use in this function); did you mean 'riscv_hwprobe'?
63 | if (syscall(__NR_riscv_hwprobe, &pair, 1, 0, NULL, 0) == 0
| ^~~~~~~~~~~~~~~~~~
| riscv_hwprobe
../util/cpuinfo-riscv.c:63:21: note: each undeclared identifier is reported only once for each function it appears in
ninja: subcommand failed
add '#include "asm/unistd.h"' to util/cpuinfo-riscv.c fixes build
Signed-off-by: Milan P. Stanić <mps@arvanta.net>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240905150702.2484-1-mps@arvanta.net>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
FCSR is a part of F extension. Print it to log if FPU option is enabled.
Signed-off-by: Maria Klauchek <m.klauchek@syntacore.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240902103433.18424-1-m.klauchek@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
While the spec doesn't state it, setting timecmp to UINT64_MAX is
another way to stop a timer, as it's considered setting the next
timer event to occur at infinity. And, even if the time CSR does
eventually reach UINT64_MAX, the very next tick will bring it back to
zero, once again less than timecmp. For this reason
riscv_timer_write_timecmp() special cases UINT64_MAX. However, if a
previously set timecmp has not yet expired, then setting timecmp to
UINT64_MAX to disable / stop it would not work, as the special case
left the previous QEMU timer active, which would then still deliver
an interrupt at that previous timecmp time. Ensure the stopped timer
will not still deliver an interrupt by also deleting the QEMU timer
in the UINT64_MAX special case.
Fixes: ae0edf2188 ("target/riscv: No need to re-start QEMU timer when timecmp == UINT64_MAX")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240829084002.1805006-2-ajones@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Just as the hart bit setting of the AIA should be calculated as
ceil(log2(max_hart_id + 1)) the group bit setting should be
calculated as ceil(log2(max_group_id + 1)). The hart bits are
implemented by passing max_hart_id to find_last_bit() and adding
one to the result. Do the same for the group bit setting.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240821075040.498945-2-ajones@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The OpenTitan Ibex CPU now supports the the Zba, Zbb, Zbc
and Zbs bit-manipulation sub-extensions ratified in
v.1.0.0 of the RISC-V Bit- Manipulation ISA Extension, so let's enable
them in QEMU as well.
1: https://github.com/lowRISC/opentitan/pull/9748
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240823003231.3522113-1-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
za64rs requires priv 1.12 when enabled by priv 1.11.
This fixes annoying warning:
warning: disabling za64rs extension for hart 0x00000000 because privilege spec version does not match
on priv 1.11 CPUs.
Fixes: 68c9e54bea ("target/riscv: do not enable all named features by default")
Signed-off-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240823063431.17474-1-vladimir.isaev@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Gitlab issue [1] reports a misleading error when trying to run a 'rv64'
cpu with 'zfinx' and without 'f':
$ ./build/qemu-system-riscv64 -nographic -M virt -cpu rv64,zfinx=true,f=false
qemu-system-riscv64: Zfinx cannot be supported together with F extension
The user explicitly disabled F and the error message mentions a conflict
with Zfinx and F.
The problem isn't the error reporting, but the logic used when applying
the implied ZFA rule that enables RVF unconditionally, without honoring
user choice (i.e. keep F disabled).
Change cpu_enable_implied_rule() to check if the user deliberately
disabled a MISA bit. In this case we shouldn't either re-enable the bit
nor apply any implied rules related to it.
After this change the error message now shows:
$ ./build/qemu-system-riscv64 -nographic -M virt -cpu rv64,zfinx=true,f=false
qemu-system-riscv64: Zfa extension requires F extension
Disabling 'zfa':
$ ./build/qemu-system-riscv64 -nographic -M virt -cpu rv64,zfinx=true,f=false,zfa=false
qemu-system-riscv64: D extension requires F extension
And finally after disabling 'd':
$ ./build/qemu-system-riscv64 -nographic -M virt -cpu rv64,zfinx=true,f=false,zfa=false,d=false
(OpenSBI boots ...)
[1] https://gitlab.com/qemu-project/qemu/-/issues/2486
Cc: Frank Chang <frank.chang@sifive.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2486
Fixes: 047da861f9 ("target/riscv: Introduce extension implied rule helpers")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240824173338.316666-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As per the step 5 in the process documented in bios-tables-test.c,
generate the expected ACPI SRAT AML data file for RISC-V using the
rebuild-expected-aml.sh script and update the
bios-tables-test-allowed-diff.h.
This is a new file being added for the first time. Hence, iASL diff
output is not added.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <a667480203b35508038176c8ce4722370294cc57.1723172696.git.haibo1.xu@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add ACPI SRAT table test case for RISC-V when NUMA was enabled.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <a6f7e1a4b20ff7eb199e94ca0c8aa2e6794ce5b2.1723172696.git.haibo1.xu@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As per process documented (steps 1-3) in bios-tables-test.c, add
empty AML data file for RISC-V ACPI SRAT table and add the entry
in bios-tables-test-allowed-diff.h.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <0e30216273f2f59916bc651350578d8e8bc3a75f.1723172696.git.haibo1.xu@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RVV spec allows implementations to set vl with values within
[ceil(AVL/2),VLMAX] when VLMAX < AVL < 2*VLMAX. This commit adds a
property "rvv_vl_half_avl" to enable setting vl = ceil(AVL/2). This
behavior helps identify compiler issues and bugs.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-ID: <20240722175004.23666-1-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove some defines and enums that are OMAP2 specific and
no longer used anywhere.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-54-peter.maydell@linaro.org
The omap_dma4 device was only used in the OMAP2 SoC, which has
been removed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-53-peter.maydell@linaro.org
The omap_l4 device is OMAP2 only, so we can remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-51-peter.maydell@linaro.org
The omap_tap device is OMAP2 only, and we are removing it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-49-peter.maydell@linaro.org
Remove the omap_synctimer device, which is only in the OMAP2 SoC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-46-peter.maydell@linaro.org
