This leakage can be seen through test-io-channel-tls:
$ ../configure --target-list=aarch64-softmmu --enable-sanitizers
$ make ./tests/unit/test-io-channel-tls
$ ./tests/unit/test-io-channel-tls
Indirect leak of 104 byte(s) in 1 object(s) allocated from:
#0 0x7f81d1725808 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cc:144
#1 0x7f81d135ae98 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x57e98)
#2 0x55616c5d4c1b in object_new_with_propv ../qom/object.c:795
#3 0x55616c5d4a83 in object_new_with_props ../qom/object.c:768
#4 0x55616c5c5415 in test_tls_creds_create ../tests/unit/test-io-channel-tls.c:70
#5 0x55616c5c5a6b in test_io_channel_tls ../tests/unit/test-io-channel-tls.c:158
#6 0x7f81d137d58d (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x7a58d)
Indirect leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7f81d1725a06 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cc:153
#1 0x7f81d1472a20 in gnutls_dh_params_init (/lib/x86_64-linux-gnu/libgnutls.so.30+0x46a20)
#2 0x55616c6485ff in qcrypto_tls_creds_x509_load ../crypto/tlscredsx509.c:634
#3 0x55616c648ba2 in qcrypto_tls_creds_x509_complete ../crypto/tlscredsx509.c:694
#4 0x55616c5e1fea in user_creatable_complete ../qom/object_interfaces.c:28
#5 0x55616c5d4c8c in object_new_with_propv ../qom/object.c:807
#6 0x55616c5d4a83 in object_new_with_props ../qom/object.c:768
#7 0x55616c5c5415 in test_tls_creds_create ../tests/unit/test-io-channel-tls.c:70
#8 0x55616c5c5a6b in test_io_channel_tls ../tests/unit/test-io-channel-tls.c:158
#9 0x7f81d137d58d (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x7a58d)
...
SUMMARY: AddressSanitizer: 49143 byte(s) leaked in 184 allocation(s).
The docs for `g_source_add_child_source(source, child_source)` says
"source will hold a reference on child_source while child_source is
attached to it." Therefore, we should unreference the child source at
`qio_channel_tls_read_watch()` after attaching it to `source`. With this
change, ./tests/unit/test-io-channel-tls shows no leakages.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The scancodes for the Lang1 and Lang2 keys (i.e. Hangeul, Hanja) are
special since they already have the 0x80 bit set which is commonly used
to indicate a key release in AT set 1. Reportedly, real hardware does
not send a key release scancode. So, skip sending a release for these
keys. This ensures that Windows behaves correctly and interprets it as a
single keypress rather than two consecutive keypresses.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To be able to use the function keys F13 to F24 these should be defined in de keycodemapdb and added to the qapi.
The keycodemapdb is updated in its own repository, this patch enables the use of those keys within qemu.
Signed-off-by: Willem van de Velde <williamvdvelde@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Fix incorrect register name in RISC-V disassembler for fmv,fabs,fneg instructions
Signed-off-by: Mikhail Tyutin <m.tyutin@yadro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <3454991f-7f64-24c3-9a36-f5fa2cc389e1@yadro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The decoding of the slli_uw currently contains decoding
error: shamt part of opcode has six bits, not five.
Fixes 3de1fb71("target/riscv: update disas.c for xnor/orn/andn and slli.uw")
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230227090228.17117-1-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We can enable EGL later for non-GBM hosts.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Allow to build & use the DBus display without 3d/GPU acceleration support.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Future patches will introduce EGL support on win32 (too late for 8.0
though). Having a common place for EGL initialization and error handling
will make it simpler.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
-display sdl,gl=es didn't actually use OpenGL ES.
Using OpenGL ES allows to use ANGLE, which works generally better than
Windows/OEM OpenGL driver.
(note: users can still bypass the QEMU choice with SDL_RENDER_DRIVER
environment variable)
(note: for some reason, specifying a driver disables batching and
breaks rendering, so enable it explicitly)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Enable SDL logging when QEMU_ENABLE_SDL_LOGGING variable is set, as
suggested by Sam Lantinga, upstream SDL maintainer.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
ANGLE fails to compile shaders otherwise.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There is no guarantee to have a current GL context here. The current
code seems to rely on the renderer using a GL backend, and to set a
current GL context. But this is not always the case, for example if the
renderer backend is DirectX.
This change is enough to fix using virgl with sdl2 on win32, on my setup.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Keeping the current cursor around is useful, not only for VNC, but for
other displays. Let's move it down, see the following patches for other
usages.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The naming is more conventional in QEMU code, and allows to simplify
some code by changing the API design, so it returns the input parameter,
instead of void.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The naming is more conventional in QEMU.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It's simply by luck that dbus-display header is built first before the
other units using it.
With sourceset, I can't find an easier way out than declaring an extra
dependency for dbus-display1 generate code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Fixes unregistration with p2p connections, since they don't have an
associated name owner.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Or else, we may randomly destroy some textures..
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These functions are no longer used.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace with tcg_constant_vec*.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_constant_i32 for the bounds.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All remaining uses are strictly read-only.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix incorrect read from rD.
Avoid adding 0 when rA == 0.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Compute all carry bits in parallel instead of a loop.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses are strictly read-only.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses are strictly read-only.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All remaining uses are strictly read-only.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Initialize a new temp instead of tcg_const_*.
Fix a pasto in a comment.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All remaining uses are strictly read-only.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Compute both partial results separately and accumulate
at the end, instead of accumulating in the middle.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Return a constant for an immediate input.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Here it is not trivial to notice first initialization, so explicitly
zero the temps. Use an array for the output, rather than separate
tcg_rd/tcg_rd_hi variables.
Fixes a bug by adding a missing clear_vec_high.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It is easy enough to use mov instead of or-with-zero
and relying on the optimizer to fold away the or.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It is easy enough to use mov instead of or-with-zero and relying
on the optimizer to fold away the or. Use an array for the output,
rather than separate tcg_res{l,h} variables.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses are in the context of an accumulator conditionally
having a zero input. Split the rda variable to rda_{i,o},
and set rda_i to tcg_constant_foo(0) when required.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This hides the implicit initialization of a variable.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reorg temporary usage so that we can use tcg_constant_i32.
tcg_gen_deposit_i32 already has a width == 32 special case,
so remove the check here.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out common subroutines for handing rounding mode
changes during translation. Use tcg_constant_i32 and
tcg_temp_new_i32 instead of tcg_const_i32.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for extracting new helpers, ensure that
the rounding mode is represented as ARMFPRounding and
not FloatRoundMode.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use proper enumeration types for input and output.
Use a const array to perform the mapping, with an
assert that the input is valid.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While this enumerator has been present since the first commit,
it isn't ever used. The first actual use of round-to-odd came
with SVE, which currently uses float_round_to_odd instead of
the arm-specific enumerator.
Amusingly, the comment about unhandled TIEAWAY has been
out of date since the initial commit of translate-a64.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Initialize rmode to -1 instead of keeping two variables.
This is already used elsewhere in translate-a64.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
