This patch adds a basic dd subcommand analogous to dd(1) to qemu-img.
For the start, this implements the bs, if, of and count options and requires
both if and of to be specified (no stdin/stdout if not specified) and doesn't
support tty, pipes, etc.
The image format must be specified with -O for the output if the raw format
is not the intended one.
Two tests are added to test qemu-img dd.
Signed-off-by: Reda Sallahi <fullmanet@gmail.com>
Message-id: 20160810024312.14544-1-fullmanet@gmail.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[mreitz: Moved test 158 to 170]
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds support for testing the LUKS driver with the block
I/O test framework.
cd tests/qemu-io-tests
./check -luks
A handful of test cases are modified to work with luks
- 004 - whitelist luks format
- 012 - use TEST_IMG_FILE instead of TEST_IMG for file ops
- 048 - use TEST_IMG_FILE instead of TEST_IMG for file ops.
don't assume extended image contents is all zeros,
explicitly initialize with zeros
Make file size smaller to avoid having to decrypt
1 GB of data.
- 052 - don't assume initial image contents is all zeros,
explicitly initialize with zeros
- 100 - don't assume initial image contents is all zeros,
explicitly initialize with zeros
With this patch applied, the results are as follows:
Passed: 001 002 003 004 005 008 009 010 011 012 021 032 043
047 048 049 052 087 100 134 143
Failed: 033 120 140 145
Skipped: 007 013 014 015 017 018 019 020 022 023 024 025 026
027 028 029 030 031 034 035 036 037 038 039 040 041
042 043 044 045 046 047 049 050 051 053 054 055 056
057 058 059 060 061 062 063 064 065 066 067 068 069
070 071 072 073 074 075 076 077 078 079 080 081 082
083 084 085 086 087 088 089 090 091 092 093 094 095
096 097 098 099 101 102 103 104 105 107 108 109 110
111 112 113 114 115 116 117 118 119 121 122 123 124
128 129 130 131 132 133 134 135 136 137 138 139 141
142 144 146 148 150 152
The reasons for the failed tests are:
- 033 - needs adapting to use image opts syntax with blkdebug
and test image in order to correctly set align property
- 120 - needs adapting to use correct -drive syntax for luks
- 140 - needs adapting to use correct -drive syntax for luks
- 145 - needs adapting to use correct -drive syntax for luks
The vast majority of skipped tests are exercising code that is
qcow2 specific, though a couple could probably be usefully
enabled for luks too.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1462896689-18450-4-git-send-email-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The LUKS block driver tests will require the ability to specify
encryption secrets with block devices. This requires using the
--object argument to qemu-img/qemu-io to create a 'secret'
object.
When the IMGKEYSECRET env variable is set, it provides the
password to be associated with a secret called 'keysec0'
The _qemu_img_wrapper function isn't modified as that needs
to cope with differing syntax for subcommands, so can't be
made to use the image opts syntax unconditionally.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1462896689-18450-3-git-send-email-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently all block tests use the traditional syntax for images
just specifying a filename. To support the LUKS driver without
resorting to JSON, the tests need to be able to use the new
--image-opts argument to qemu-img and qemu-io.
This introduces a new env variable IMGOPTSSYNTAX. If this is
set to 'true', then qemu-img/qemu-io should use --image-opts.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1462896689-18450-2-git-send-email-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
_do() was never used and possibly creates temporary files at
predictable, world-writable locations. Get rid of it.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1460472980-26319-3-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit 934659c switched the iotests to run qemu-io from a bash subshell,
in order to catch segfaults. This method is incompatible with the
current valgrind_qemu_io() bash function.
Move the valgrind usage into the exec subshell in _qemu_io_wrapper(),
while making sure the original return value is passed back to the
caller.
Update test output for tests 039, 061, and 137 as it looks for the
specific subshell command when the process is terminated.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 0066fd85d26ca641a1c25135ff2479b7985701cf.1446232490.git.jcody@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit 934659c switched the iotests to run qemu and qemu-nbd from a bash
subshell, in order to catch segfaults. Unfortunately, this means the
process PID cannot be captured via '$!'. We stopped killing qemu and
qemu-nbd processes, leaving a lot of orphaned, running qemu processes
after executing iotests.
Since the process is using exec in the subshell, the PID is the
same as the subshell PID.
Track these PIDs for cleanup using pidfiles in the $TEST_DIR. Only
track the qemu PID, however, if requested - not all usage requires
killing the process.
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 9e4f958b3895b7259b98d845bb46f000ba362869.1446232490.git.jcody@redhat.com
[mreitz@redhat.com: Replaced '! -z "..."' by '-n "..."']
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, if a qemu/qemu-io/qemu-img/qemu-nbd invocation receives a
segmentation fault, that message is invisible in most cases since the
output is generally filtered and bash suppresses the segmentation fault
notice for any but the last element of a pipe.
Most of the time, the test will then fail anyway because of missing
output, but not necessarily (as happened with test 82 recently).
Fix this by making the corresponding environment variables point to
wrapper functions which execute the respective command in a subshell.
Giving options to qemu/qemu-io/qemu-img and path names with spaces were
broken for the Python tests; this patch "accidentally" fixes that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch is necessary to suppress the "probed raw" warning when
running raw over nbd tests.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The former is not portable because on Mac OSX it is /usr/bin/true.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There may be NBD tests which do not create a sample image and simply
test whether wrong usage of the protocol is rejected as expected. In
this case, there will be no NBD server and trying to kill it during
clean-up will fail.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The real on-disk size of an image depends on things like the host
filesystem. _img_info already filters it out, use the function in 060.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
We need to filter out driver-specific options in the "Formatting..."
string printed by qemu when creating the backup image.
Reported-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Peter Wu <peter@lekensteyn.nl>
As out-of-tree builds are preferred for qemu, running the qemu-iotests
in that out-of-tree build should be supported as well. To do so, a
symbolic link has to be created pointing to the check script in the
source directory. That script will check whether it has been run through
a symlink, and if so, will assume it is run in the build tree. All
output and temporary operations performed by iotests are then redirected
here and, unless specified otherwise by the user, QEMU_PROG etc. will be
set to paths appropriate for the build tree.
Also, drop making every test case executable if it is not yet, as this
would modify the source tree which is not desired for out-of-tree runs
and should be fixed in the repository anyway.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The _rm_test_img() function in common.rc did not quote the image
file, which left droppings in the scratch directory (and performed
a potentially unsafe rm -f).
This adds the necessary quotes.
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the cloop block driver to qemu-iotests.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Suppress rbd progress messages with --no-progress so they are not
confused with an error output when comparing test results ( progress is
displayed on stderr ).
Signed-off-by: Loic Dachary <loic@dachary.org>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This modifies _cleanup_test_img to remove all the extent files listed by
"qemu-img info"'s format specific information.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce _unsupported_imgopts that causes _notrun for specific image
options.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This case can't run when IMGPROTO=nbd, since it needs to create some
internal snapshot which would fail for EOF write request, even when
TEST_IMG is exported with "-f raw" in common.rc, so set _supported_proto
to file.
_require_command() is changed to tip what util is missing, instead
of printing a blank.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This replaces _unsupported_qemu_io_options and check for support of
current cache mode, and allow to provide a default if user didn't
specify.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The non-global option output is suppresed in _make_test_img() for
output verification in the 0?? tests. This adds suppression for
the vhdx-unique options as well. This allows check -vhdx to run
successfully.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
_make_test_img() currently works with spaced pathnames only when not
specifying a backing file. This fixes it so that the backing file
argument is properly quoted.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds the VHDX format to the qemu-iotests format, and adds
a read test. The test reads from an existing sample image, that
was created with Hyper-V under Windwos Server 2012.
The image file is a 1GB dynamic image, with 32MB blocks.
The pattern 0xa5 exists from 0MB-33MB (past a block size boundary)
The pattern 0x96 exists from 33MB-66MB (past another block boundary,
and leaving a partial blank block)
From 66MB-1024MB, all reads should return 0.
Although 1GB dynamic image with 66MB of data, the bzip2'ed image
file size is only 874 bytes.
This also adds in the IMGFMT_GENERIC flag, so r/o images can be
tested (e.g. ./check -vhdx) without failing tests that assume
r/w support.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In _img_info, filter out additional information specific to the image
format provided by qemu-img info, since tests designed for multiple
image formats would produce different outputs for every image format
otherwise.
In a human-readable dump, that new information will always be last for
each "image information block" (multiple blocks are emitted when
inspecting the backing file chain). Every block is separated by an empty
line. Therefore, in this case, everything starting with the line "Format
specific information:" up to that empty line (or EOF, if it is the last
block) has to be stripped.
The JSON dump will always emit pretty JSON data. Therefore, the opening
and closing braces of every object will be on lines which are indented
by exactly the same amount, and all lines in between will have more
indentation. Thus, in this case, everything starting with a line
matching the regular expression /^ *"format-specific": {/ until /^ *},?/
has to be stripped, where the number of spaces at the beginning of the
respective lines is equal.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A lot of image filename and paths are used unquoted. Quote these to
make sure that directories / filenames with spaces are not problematic.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For image formats that are not "QEMU native", but supported for
compatibility, it is useful to verify that an image created with
the 'gold standard' native tool can be read / written to successfully
by QEMU.
In addition to testing non-native images, this could also be useful to
test against image files created by older versions of QEMU.
This provides a directory to store small sample images, for use by
scripts in tests/qemu-iotests.
Image files should be compressed with bzip2.
To use a sample image from a bash script, the _use_sample_img function
will copy and decompress the image into $TEST_DIR, and set $TEST_IMG to
be the decompressed sample image copy. To cleanup, call
_cleanup_test_img as normal.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When opening/creating images, propagating errors instead of immediately
emitting them on occurrence results in errors generally being printed on
a single line rather than being split up into multiple ones. This in
turn requires adjustments to some test results.
Also, test 060 used a sed to filter out the test image directory and
format by removing everything from the affected line after a certain
keyword; this now also removes the error message itself, which can be
fixed by using _filter_testdir and _filter_imgfmt.
Finally, _make_test_img in common.rc did not filter out the test image
directory etc. from stderr. This has been fixed through a redirection of
stderr to stdout (which is already done in _check_test_img and
_img_info).
Signed-off-by: Max Reitz <mreitz@redhat.com>
These scripts used to have a four characters indentation, with eight
consecutive spaces converted into a tab. Convert everything into spaces.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The new poke_file function sets bytes at an offset in a file given a
printf-style format string. It can be used to corrupt an image file for
test coverage of error paths.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Filter out vmdk creation option 'adapter_type' for vmdk. So that tests
with an explicit './check -o adapter_type=XXX' will not fail.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Cover new image creation options for vmdk, so we can use '-o
zeroed_grain=XXX' and '-o subformat=XXX' to run the tests successfully.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Note in order to run these tests on ssh, you must be running a local
ssh daemon, and that daemon must accept loopback connections, and
ssh-agent has to be set up to allow logins on the local daemon. In
other words, the following command should just work without demanding
any passphrase:
ssh localhost
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Show how many clusters are compressed. This can be used to monitor how
many compressed clusters remain and whether to recompress the image.
Suggested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds the support for reporting the image end offset (in
bytes). This is particularly useful after a conversion (or a rebase)
where the destination is a block device in order to find the first
unused byte at the end of the image.
Signed-off-by: Federico Simoncelli <fsimonce@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To do this, we start a qemu-nbd process at _make_test_img and kill
it in _cleanup_test_img. $TEST_IMG is changed to point at the TCP
server. We also remove the checks for existence of binaries from
common.config - they're duplicated in common, and we can make the
qemu-nbd check conditional on $IMGPROTO being "nbd" if we do it there.
Signed-off-by: Nick Thomas <nick@bytemark.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new test verifies that qemu-img info --backing-chain safely aborts
when an image file has a backing file infinite loop.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the qemu-io --nocache option is used the 039 test case cannot abort
QEMU at a point where the image is dirty. Skip the test case.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of building a huge pipeline, just pass all expressions to a
single sed process.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests already filters out image creation options that may be
present or not in order to get the same output in both cases. However,
often it only considers the default value of the option. Cover all valid
values instead so that ./check -o name=value can be used successfull for
all of them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Hide the default lazy_refcounts=off output from qemu-img like we do with
other image creation options. This ensures that existing golden outputs
continue to pass despite the new option that has been added.
Note that this patch applies before the one that actually introduces the
lazy_refcounts=on|off option. This ensures git-bisect(1) continues to
work.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
check -valgrind wraps all qemu-io calls with valgrind. This makes it a
bit easier to debug problems that occur somewhere deep in a test case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
We added image fragmentation statistics functions to qemu-img several days
ago, those patches will cause "./check -qed" failed. This patch will ignore
fragmentation statistics information of qed format, and then "./check -qed"
will work.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds an -o option to qemu-iotests, which is an option string that
is passed through to qemu-img create -o... This allows testing different
subformat with a command like './check -qcow2 -o compat=0.10'.
For qcow2, if no compat option is specified, compat=1.1 is the new
default.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some image formats do have a cluster size, others don't, but there are
tests that work with both sets of images and currently we get failures
because the qemu-img create output doesn't mention the cluster size for
some formats.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-img requires first options, then file name, then size.
GNU getopt also allows options at the end, but POSIX getopt
doesn't. Try "export POSIXLY_CORRECT=y" to get the POSIX
behaviour with GNU getopt, too.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Until recently, qemu-img create displayed cluster_size=0 for the default
cluster size. It is changed to display the real cluster size now, which results
in the cluster size not being filtered out any more.
If the cluster size is specified explicitly in CLUSTER_SIZE, keep the output,
and if using the default, filter it out. This mostly restores the old behaviour
of the test cases; test 015 must be fixed to use CLUSTER_SIZE instead of using
extra_img_options for it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch introduces tests for protocols other than file, and
initially supports rbd and sheepdog.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The tests use bash language features like 'let', which aren't supported
by /bin/sh on systems that use a conservative shell like dash. This
patch changes the interpreter to /bin/bash.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Change the io_test and io_test2 functions to take the cluster size of the image
and the number of test requests to issue. Tests are changed to specify a
cluster size (usually 4k), but expected test results stay the same for now
(apart from qemu-img printing the cluster size now).
Based on a patch written by Christoph Hellwig.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
VDI supports an image option 'static'.
Ignore "static=off" from qemu-img output.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Blue Swirl notices that we were using the old FSF post address in the
license boilerplates. Replace both the old and new address with links
to the gnu.org licenses homepage as suggested by Ben Pfaff.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Pretend that a non-implemented check is always successful and thus allow
various tests that were qcow2-specific before to be generic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>