In dump_address_map(), use address_space_ldl() instead of ldl_phys().
This allows us to check whether the memory access failed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20181210165636.28366-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We can now use the CPUClass hook instead of a named function.
Create a static tlb_fill function to avoid other changes within
cputlb.c. This also isolates the asserts within. Remove the
named tlb_fill function from all of the targets.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In order to handle TB's that translate to too much code, we
need to place the control of the length of the translation
in the hands of the code gen master loop.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it. Most callers pass fprintf() and stderr.
log_cpu_state() passes fprintf() and qemu_log_file.
hmp_info_registers() passes monitor_fprintf() and the current monitor
cast to FILE *. monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf().
The callback gets passed around a lot, which is tiresome. The
type-punning around monitor_fprintf() is ugly.
Drop the callback, and call qemu_fprintf() instead. Also gets rid of
the type-punning, since qemu_fprintf() takes NULL instead of the
current monitor cast to FILE *.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-15-armbru@redhat.com>
The various dump_mmu() take an fprintf()-like callback and a FILE * to
pass to it, and so do their helper functions. Passing around callback
and argument is rather tiresome.
Most dump_mmu() are called only by the target's hmp_info_tlb(). These
all pass monitor_printf() cast to fprintf_function and the current
monitor cast to FILE *.
SPARC's dump_mmu() gets also called from target/sparc/ldst_helper.c a
few times #ifdef DEBUG_MMU. These calls pass fprintf() and stdout.
The type-punning is technically undefined behaviour, but works in
practice. Clean up: drop the callback, and call qemu_printf()
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-11-armbru@redhat.com>
The various TARGET_cpu_list() take an fprintf()-like callback and a
FILE * to pass to it. Their callers (vl.c's main() via list_cpus(),
bsd-user/main.c's main(), linux-user/main.c's main()) all pass
fprintf() and stdout. Thus, the flexibility provided by the (rather
tiresome) indirection isn't actually used.
Drop the callback, and call qemu_printf() instead.
Calling printf() would also work, but would make the code unsuitable
for monitor context without making it simpler.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417191805.28198-10-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It's either "GNU *Library* General Public License version 2" or
"GNU Lesser General Public License version *2.1*", but there was
no "version 2.0" of the "Lesser" license. So assume that version
2.1 is meant here.
Also some files mention the GPL instead of the LGPL after declaring
that the files are licensed under the LGPL, so change these spots to
use LGPL, too.
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1548769438-28942-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Coldfire defines an "Unsupported instruction" exception if execution
of a valid instruction is attempted but the required hardware is not
present in the processor.
We use it with instructions that are in fact undefined or illegal,
and the exception expected in this case by the kernel is the
illegal exception, so this patch fixes that.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20181030165554.5761-1-laurent@vivier.eu>
Rather than limit total TB size to PAGE-32 bytes, end the TB when
near the end of a page. This should provide proper semantics of
SIGSEGV when executing near the end of a page.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-9-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Removed ctx->insn_pc in favour of ctx->base.pc_next.
Yes, it is annoying, but didn't want to waste its 4 bytes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The name gen_lookup_tb is at odds with tcg_gen_lookup_and_goto_tb.
For these cases, we do indeed want to exit back to the main loop.
Similarly, DISAS_UPDATE performs no actual update, whereas DISAS_EXIT
does what it says.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These are all indirect or out-of-page direct jumps.
We can indirectly chain to the next TB without going
back to the main loop.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We have exited the TB after using goto_tb; there is no
distinction from DISAS_NORETURN.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The raise_exception helper does not return. Do not generate
any code following that.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Do the cast to uintptr_t within the helper, so that the compiler
can type check the pointer argument. We can also do some more
sanity checking of the index argument.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Update the variable checked by the loop condition (expDiff).
Backport the update from Previous.
Fixes: 591596b77a ("target/m68k: add fmod/frem")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20180508203937.16796-1-laurent@vivier.eu>
Fedora 28 ships with the released gcc 8.
The Werror stems from the compiler finding a path through the second
switch via a missing default case in which src1 is uninitialized, and
not being able to prove that the missing default case is unreachable
due to the first switch.
Simplify the second switch to merge default with OS_LONG,
which returns directly. This removes the unreachable path.
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20180508185520.23757-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
floatx80_sin() and floatx80_cos() are derived from one
sincos() function. They have both unused code coming from
their common origin. Remove it.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180430170156.1860-2-laurent@vivier.eu>
return the result of packFloatx80() instead of
dropping it.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180430170156.1860-1-laurent@vivier.eu>
This patch fixes decrement of the pointers for subx mem, mem instructions.
Without the patch pointers are decremented by OS_* constant value instead of
retrieving the corresponding data size and using it as a decrement.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180418064152.24606.71975.stgit@pasha-VirtualBox>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
68000 CPUs do not save format in the exception stack frame.
This patch adds feature checking to prevent format saving for 68000.
m68k_ret() already includes this modification, this patch fixes
the exception processing function too.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180413133041.29509.59064.stgit@pasha-VirtualBox>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In icount mode, instructions that access io memory spaces in the middle
of the translation block invoke TB recompilation. After recompilation,
such instructions become last in the TB and are allowed to access io
memory spaces.
When the code includes instruction like i386 'xchg eax, 0xffffd080'
which accesses APIC, QEMU goes into an infinite loop of the recompilation.
This instruction includes two memory accesses - one read and one write.
After the first access, APIC calls cpu_report_tpr_access, which restores
the CPU state to get the current eip. But cpu_restore_state_from_tb
resets the cpu->can_do_io flag which makes the second memory access invalid.
Therefore the second memory access causes a recompilation of the block.
Then these operations repeat again and again.
This patch moves resetting cpu->can_do_io flag from
cpu_restore_state_from_tb to cpu_loop_exit* functions.
It also adds a parameter for cpu_restore_state which controls restoring
icount. There is no need to restore icount when we only query CPU state
without breaking the TB. Restoring it in such cases leads to the
incorrect flow of the virtual time.
In most cases new parameter is true (icount should be recalculated).
But there are two cases in i386 and openrisc when the CPU state is only
queried without the need to break the TB. This patch fixes both of
these cases.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180409091320.12504.35329.stgit@pasha-VirtualBox>
[rth: Make can_do_io setting unconditional; move from cpu_exec;
make cpu_loop_exit_{noexc,restore} call cpu_loop_exit.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
SRC_EA() and gen_extend() can return either a temporary
TCGv or a memory allocated one. Mark them when they are
allocated, and free them automatically at end of the
instruction translation.
We want to free locally allocated TCGv to avoid
overflow in sequence like:
0xc00ae406: movel %fp@(-132),%fp@(-268)
0xc00ae40c: movel %fp@(-128),%fp@(-264)
0xc00ae412: movel %fp@(-20),%fp@(-212)
0xc00ae418: movel %fp@(-16),%fp@(-208)
0xc00ae41e: movel %fp@(-60),%fp@(-220)
0xc00ae424: movel %fp@(-56),%fp@(-216)
0xc00ae42a: movel %fp@(-124),%fp@(-252)
0xc00ae430: movel %fp@(-120),%fp@(-248)
0xc00ae436: movel %fp@(-12),%fp@(-260)
0xc00ae43c: movel %fp@(-8),%fp@(-256)
0xc00ae442: movel %fp@(-52),%fp@(-276)
0xc00ae448: movel %fp@(-48),%fp@(-272)
...
That can fill a lot of TCGv entries in a sequence,
especially since 15fa08f845 ("tcg: Dynamically allocate TCGOps")
we have no limit to fill the TCGOps cache and we can fill
the entire TCG variables array and overflow it.
Suggested-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180319113544.704-3-laurent@vivier.eu>
This parameter will be needed to manage automatic release
of temporary allocated TCG variables.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180319113544.704-2-laurent@vivier.eu>
cpu_init(cpu_model) were replaced by cpu_create(cpu_type) so
no users are left, remove it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc)
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1518000027-274608-6-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
it will be used for providing to cpu name resolving class for
parsing cpu model for system and user emulation code.
Along with change add target to null-machine tests, so
that when switch to CPU_RESOLVING_TYPE happens,
it would ensure that null-machine usecase still works.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu> (m68k)
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc)
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> (tricore)
Message-Id: <1518000027-274608-4-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: Added macro to riscv too]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Using a local m68k floatx80_cosh()
[copied from previous:
Written by Andreas Grabher for Previous, NeXT Computer Emulator.]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180312202728.23790-12-laurent@vivier.eu>
Using a local m68k floatx80_sinh()
[copied from previous:
Written by Andreas Grabher for Previous, NeXT Computer Emulator.]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180312202728.23790-11-laurent@vivier.eu>
Using local m68k floatx80_tanh() and floatx80_etoxm1()
[copied from previous:
Written by Andreas Grabher for Previous, NeXT Computer Emulator.]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180312202728.23790-10-laurent@vivier.eu>
Using a local m68k floatx80_atanh()
[copied from previous:
Written by Andreas Grabher for Previous, NeXT Computer Emulator.]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180312202728.23790-9-laurent@vivier.eu>
Using a local m68k floatx80_acos()
[copied from previous:
Written by Andreas Grabher for Previous, NeXT Computer Emulator.]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180312202728.23790-8-laurent@vivier.eu>
Using a local m68k floatx80_asin()
[copied from previous:
Written by Andreas Grabher for Previous, NeXT Computer Emulator.]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180312202728.23790-7-laurent@vivier.eu>
Using a local m68k floatx80_atan()
[copied from previous:
Written by Andreas Grabher for Previous, NeXT Computer Emulator.]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180312202728.23790-6-laurent@vivier.eu>
Using a local m68k floatx80_cos()
[copied from previous:
Written by Andreas Grabher for Previous, NeXT Computer Emulator.]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180312202728.23790-4-laurent@vivier.eu>
Using a local m68k floatx80_sin()
[copied from previous:
Written by Andreas Grabher for Previous, NeXT Computer Emulator.]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180312202728.23790-3-laurent@vivier.eu>
Using a local m68k floatx80_tan()
[copied from previous:
Written by Andreas Grabher for Previous, NeXT Computer Emulator.]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180312202728.23790-2-laurent@vivier.eu>
Using a local m68k floatx80_tentox()
[copied from previous:
Written by Andreas Grabher for Previous, NeXT Computer Emulator.]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180305203910.10391-9-laurent@vivier.eu>
Using a local m68k floatx80_twotox()
[copied from previous:
Written by Andreas Grabher for Previous, NeXT Computer Emulator.]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180305203910.10391-8-laurent@vivier.eu>
Using a local m68k floatx80_etox()
[copied from previous:
Written by Andreas Grabher for Previous, NeXT Computer Emulator.]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180305203910.10391-7-laurent@vivier.eu>
Using a local m68k floatx80_log2()
[copied from previous:
Written by Andreas Grabher for Previous, NeXT Computer Emulator.]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180305203910.10391-6-laurent@vivier.eu>
Using a local m68k floatx80_log10()
[copied from previous:
Written by Andreas Grabher for Previous, NeXT Computer Emulator.]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180305203910.10391-5-laurent@vivier.eu>
Using a local m68k floatx80_logn()
[copied from previous:
Written by Andreas Grabher for Previous, NeXT Computer Emulator.]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180305203910.10391-4-laurent@vivier.eu>
Using a local m68k floatx80_lognp1()
[copied from previous:
Written by Andreas Grabher for Previous, NeXT Computer Emulator.]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180305203910.10391-3-laurent@vivier.eu>
This functions is needed by upcoming m68k softfloat functions.
Source code copied for WinUAE (tag 3500)
(The WinUAE file has been copied from QEMU and has
the QEMU licensing notice)
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180305203910.10391-2-laurent@vivier.eu>
Using local m68k floatx80_getman(), floatx80_getexp(), floatx80_scale()
[copied from previous:
Written by Andreas Grabher for Previous, NeXT Computer Emulator.]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180224201802.911-5-laurent@vivier.eu>
Using a local m68k floatx80_mod()
[copied from previous:
Written by Andreas Grabher for Previous, NeXT Computer Emulator.]
The quotient byte of the FPSR is updated with
the result of the operation.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180224201802.911-3-laurent@vivier.eu>
As cpu.h is another typically widely included file which doesn't need
full access to the softfloat API we can remove the includes from here
as well. Where they do need types it's typically for float_status and
the rounding modes so we move that to softfloat-types.h as well.
As a result of not having softfloat in every cpu.h call we now need to
add it to various helpers that do need the full softfloat.h
definitions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[For PPC parts]
Acked-by: David Gibson <david@gibson.dropbear.id.au>
This patch implements movep instruction. It moves data between a data register
and alternate bytes within the address space starting at the location
specified and incrementing by two.
It was designed for the original 68000 and used in firmwares for
interfacing the 8-bit peripherals through the 16-bit data bus.
Without this patch opcode for this instruction is recognized as some bitop.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Mihail Abakumov <mikhail.abakumov@ispras.ru>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180206124431.31433.91946.stgit@pasha-VirtualBox>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
and introduce SFC and DFC control registers.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-6-laurent@vivier.eu>
The instruction "moves" can select source and destination
address space (user or kernel). This patch modifies
all the load/store functions to be able to provide
the address space the caller wants to use instead
of using the current one. All the callers are modified
to provide the default address space to these functions.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-5-laurent@vivier.eu>
Only add MC68040 MMU page table processing and related
registers (Special Status Word, Translation Control Register,
User Root Pointer and Supervisor Root Pointer).
Transparent Translation Registers, DFC/SFC and pflush/ptest
will be added later.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-3-laurent@vivier.eu>
The MC68040 MMU provides the size of the access that
triggers the page fault.
This size is set in the Special Status Word which
is written in the stack frame of the access fault
exception.
So we need the size in m68k_cpu_unassigned_access() and
m68k_cpu_handle_mmu_fault().
To be able to do that, this patch modifies the prototype of
handle_mmu_fault handler, tlb_fill() and probe_write().
do_unassigned_access() already includes a size parameter.
This patch also updates handle_mmu_fault handlers and
tlb_fill() of all targets (only parameter, no code change).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-2-laurent@vivier.eu>
t64 is also unconditionally freed after the switch () { ... }
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180119114444.7590-1-laurent@vivier.eu>
Display correctly the Trace bits for 680x0
(2 bits instead of 1 for Coldfire).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180104012913.30763-18-laurent@vivier.eu>
Add the third stack pointer, the Interrupt Stack Pointer (ISP)
(680x0 only). This stack will be needed in softmmu mode.
Update movec to set/get the value of the three stacks.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180104012913.30763-17-laurent@vivier.eu>
Some cleanup, and allows SR to be moved from any addressing mode.
Previous code was wrong for coldfire: coldfire also allows to
use addressing mode to set SR/CCR. It only supports Data register
to get SR/CCR (move from)
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180104012913.30763-15-laurent@vivier.eu>
The following patches will be clearer if we move
functions before adding new ones.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180104012913.30763-14-laurent@vivier.eu>
The instruction traps if the CPU is not in
Supervisor state but the helper is empty because
there is no easy way to reset all the peripherals
without resetting the CPU itself.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180104012913.30763-12-laurent@vivier.eu>
Add cache lines invalidate and cache lines push
as no-op operations, as we don't have cache.
These instructions are 68040 only.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180104012913.30763-11-laurent@vivier.eu>
move16 moves the source line to the destination line. Lines are aligned
to 16-byte boundaries and are 16 bytes long.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180104012913.30763-9-laurent@vivier.eu>
chk and chk2 compare a value to boundaries, and
trigger a CHK exception if the value is out of bounds.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180104012913.30763-8-laurent@vivier.eu>
Display the interrupts/exceptions information
in QEMU logs (-d int)
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180104012913.30763-6-laurent@vivier.eu>
As gen_helper_get_ccr() is able to compute CCR from cc_op and
flags, we don't need to flush flags before to call it.
flush_flags() and get_ccr() use COMPUTE_CCR() to compute
flags. get_ccr() computes CCR value,
whereas flush_flags update live cc_op and flags.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180104012913.30763-3-laurent@vivier.eu>
And remove update_cc_op() from gen_exception() because there is
one in gen_jmp_im().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180104012913.30763-2-laurent@vivier.eu>
These are now trivial sets and tests against NULL. Unwrap.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
cpu_restore_state officially supports being passed an address it can't
resolve the state for. As a result the checks in the helpers are
superfluous and can be removed. This makes the code consistent with
other users of cpu_restore_state.
Of course this does nothing to address what to do if cpu_restore_state
can't resolve the state but so far it seems this is handled elsewhere.
The change was made with included coccinelle script.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[rth: Fixed up comment indentation. Added second hunk to script to
combine cpu_restore_state and cpu_loop_exit.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The first call of set_cc_op() in a new translation sequence
is done with old_op set to CC_OP_DYNAMIC (-1).
This will do an out of bound access to the array cc_op_live[].
We fix that by adding an entry in cc_op_live[] for CC_OP_DYNAMIC.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20171221160558.14151-1-laurent@vivier.eu>
It has been introduced by e6e5906b6e ("ColdFire target."),
but the content is never used.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20171220130815.20708-1-laurent@vivier.eu>
use new M68K_CPU_TYPE_NAME to compose CPU type names
and get rid of intermediate M68kCPUInfo/register_cpu_type()
which is replaced by static TypeInfo array.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1507211474-188400-12-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Now that every target is using the disas_set_info hook,
the flags argument is unused. Remove it.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is identical for each target. So, move the initialization to
common code. Move the variable itself out of tcg_ctx and name it
cpu_env to minimize changes within targets.
This also means we can remove tcg_global_reg_new_{ptr,i32,i64},
since there are no longer global-register temps created by targets.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting multiple TCG contexts.
The core of this patch is this change to tcg/tcg.h:
> -extern TCGContext tcg_ctx;
> +extern TCGContext tcg_init_ctx;
> +extern TCGContext *tcg_ctx;
Note that for now we set *tcg_ctx to whatever TCGContext is passed
to tcg_context_init -- in this case &tcg_init_ctx.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Thereby decoupling the resulting translated code from the current state
of the system.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert all existing readers of tb->cflags to tb_cflags, so that we
use atomic_read and therefore avoid undefined behaviour in C11.
Note that the remaining setters/getters of the field are protected
by tb_lock, and therefore do not need conversion.
Luckily all readers access the field via 'tb->cflags' (so no foo.cflags,
bar->cflags in the code base), which makes the conversion easily
scriptable:
FILES=$(git grep 'tb->cflags' target include/exec/gen-icount.h \
accel/tcg/translator.c | cut -f1 -d':' | sort | uniq)
perl -pi -e 's/([^.>])tb->cflags/$1tb_cflags(tb)/g' $FILES
perl -pi -e 's/([a-z->.]*)(->|\.)tb->cflags/tb_cflags($1$2tb)/g' $FILES
Then manually fixed the few errors that checkpatch reported.
Compile-tested for all targets.
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move target cpu tcg initialization to common code,
called from cpu_exec_realizefn.
Acked-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When we used structures for TCGv_*, we needed a macro in order to
perform a comparison. Now that we use pointers, this is just clutter.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GCC 4.7.2 on SunOS reports that the values assigned to array members are not
real constants:
target/m68k/fpu_helper.c:32:5: error: initializer element is not constant
target/m68k/fpu_helper.c:32:5: error: (near initialization for 'fpu_rom[0]')
rules.mak:66: recipe for target 'target/m68k/fpu_helper.o' failed
Convert the array to make_floatx80_init() to fix it.
Replace floatx80_pi-like constants with make_floatx80_init() as they are
defined as make_floatx80().
This fixes build on SmartOS (Joyent).
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170904212306.3020-1-n54@gmx.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Used later. An enum makes expected values explicit and
bounds the value space of switches.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <150002049746.22386.2316077281615710615.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
call register_m68k_insns() at realize time which makes
cpu_m68k_init() typical object creation function.
As result we can replace it with cpu_generic_init()
which does the same job, reducing code duplication a bit.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Thomas Huth <huth@tuxfamily.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1503592308-93913-12-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Needed to implement a target-agnostic gen_intermediate_code()
in the future.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002025498.22386.18051908483085660588.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Done with the Coccinelle semantic patch
scripts/coccinelle/tcg_gen_extract.cocci.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170718045540.16322-5-f4bug@amsat.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Add fsabs, fdabs, fsneg, fdneg, fsmove and fdmove.
The value is converted using the new floatx80_round() function.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170628204241.32106-7-laurent@vivier.eu>
fsglmul and fsgldiv truncate data to single precision before computing
results.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170628204241.32106-6-laurent@vivier.eu>
fmovecr moves a floating point constant from the
FPU ROM to a floating point register.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170628204241.32106-3-laurent@vivier.eu>
use DisasCompare with FPU conditions in fscc and fbcc.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170628204241.32106-2-laurent@vivier.eu>
Coldfire uses float64, but 680x0 use floatx80.
This patch introduces the use of floatx80 internally
and enables 680x0 80bits FPU.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170620205121.26515-4-laurent@vivier.eu>
on reset, set FP registers to NaN and control registers to 0
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170620205121.26515-3-laurent@vivier.eu>
Move code of fmove to/from control register to a function
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170620205121.26515-2-laurent@vivier.eu>
V flag for subtraction is:
v = (res ^ src1) & (src1 ^ src2)
(see COMPUTE_CCR() in target/m68k/helper.c)
But gen_flush_flags() uses:
v = (res ^ src2) & (src1 ^ src2)
The problem has been found with the following program:
.global _start
_start:
move.l #-2147483648,%d0
subq.l #1,%d0
jvc 1f
move.l #1,%d1
move.l #1,%d0
trap #0
1:
move.l #0,%d1
move.l #1,%d0
trap #0
It works fine (exit(1)) on real hardware, and with "-singlestep".
"-singlestep" uses gen_helper_flush_flags(), whereas
without "-singlestep", V flag is computed directly in
gen_flush_flags().
This patch updates gen_flush_flags() to have the same result
as with gen_helper_flush_flags().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170614203905.19657-1-laurent@vivier.eu>
Add "Return and Deallocate" (rtd) instruction.
RTD #d
(SP) -> PC
SP + 4 + d -> SP
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-By: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Message-Id: <20170605100014.22981-1-laurent@vivier.eu>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYeOOmAAoJEPvQ2wlanipE3ZUH/Rsfpl23kXCMmqoXEIhWXy+h
yf8ARWCmpU6UKfwb+sH4vLegBfU56f62vVkGQ6oaaAbuyQ4SxCUlZGMO/rqY8/TE
m57aM+VfEE+bIdinAtLjFM24EVp/exMfkeutK7ItzLv7GwlrBos0J5veyCuyJ15q
pccV24jrpbJGilEeJ2GblKp3r2I3dInQGauOQhtoP3MNjHmYNSQD7noSbdN/JiTR
9H2eV700pg3ZPaSfO+CTVQN+cHjK1FC6qLi6916YZY9llnSOnDAegBYgbwE1RIBw
AULpWrezYveKy71eFhHVtGxnPeCJ8J4GVECMK0P0cdxzprIXFh1kZezyM4bxAGk=
=sboI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-common-tlb-reset-20170113-r1' into staging
This is the same as the v3 posted except a re-base and a few extra signoffs
# gpg: Signature made Fri 13 Jan 2017 14:26:46 GMT
# gpg: using RSA key 0xFBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-common-tlb-reset-20170113-r1:
cputlb: drop flush_global flag from tlb_flush
cpu_common_reset: wrap TCG specific code in tcg_enabled()
qom/cpu: move tlb_flush to cpu_common_reset
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On 680x0 family only.
Address Register indirect With postincrement:
When using the stack pointer (A7) with byte size data, the register
is incremented by two.
Address Register indirect With predecrement:
When using the stack pointer (A7) with byte size data, the register
is decremented by two.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1484332593-16782-6-git-send-email-laurent@vivier.eu>
In these cases we must update the address register after
the operation.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1484332593-16782-4-git-send-email-laurent@vivier.eu>
gen_flush_flags() is setting unconditionally cc_op_synced to 1
and s->cc_op to CC_OP_FLAGS, whereas env->cc_op can be set
to something else by a previous tcg fragment.
We fix that by not setting cc_op_synced to 1
(except for gen_helper_flush_flags() that updates env->cc_op)
FIX: https://github.com/vivier/qemu-m68k/issues/19
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1484332593-16782-3-git-send-email-laurent@vivier.eu>
M680x0 bit operations with an immediate value use 9 bits of the 16bit
value, while coldfire ones use only 8 bits.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1484332593-16782-2-git-send-email-laurent@vivier.eu>
It is a common thing amongst the various cpu reset functions want to
flush the SoftMMU's TLB entries. This is done either by calling
tlb_flush directly or by way of a general memset of the CPU
structure (sometimes both).
This moves the tlb_flush call to the common reset function and
additionally ensures it is only done for the CONFIG_SOFTMMU case and
when tcg is enabled.
In some target cases we add an empty end_of_reset_fields structure to the
target vCPU structure so have a clear end point for any memset which
is resetting value in the structure before CPU_COMMON (where the TLB
structures are).
While this is a nice clean-up in general it is also a precursor for
changes coming to cputlb for MTTCG where the clearing of entries
can't be done arbitrarily across vCPUs. Currently the cpu_reset
function is usually called from the context of another vCPU as the
architectural power up sequence is run. By using the cputlb API
functions we can ensure the right behaviour in the future.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
This is a cleanup patch. It adds call to tcg_temp_free()
when it is missing.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Also manage word and byte operands and fix the computation of
overflow in the case of M68000 arithmetic shifts.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1478699171-10637-4-git-send-email-rth@twiddle.net>
Report this properly via exception and, importantly, allow
the disassembler the chance to tell us what insn is not handled.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1478699171-10637-3-git-send-email-rth@twiddle.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
680x0 movem can load/store words and long words and can use more
addressing modes. Coldfire can only use long words with (Ax) and
(d16,Ax) addressing modes.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1478699171-10637-2-git-send-email-rth@twiddle.net>
Implement CAS using cmpxchg.
Implement CAS2 using helper and either cmpxchg when
the 32bit addresses are consecutive, or with
parallel_cpus+cpu_loop_exit_atomic() otherwise.
Suggested-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Update helper to set the throwing location in case of div-by-0.
Cleanup divX.w and add quad word variants of divX.l.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twidle.net>
[laurent: modified to clear Z on overflow, as found with risu]
Provide gen_lea_mode and gen_ea_mode, where the mode can be
specified manually, rather than taken from the instruction.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1478206203-4606-3-git-send-email-rth@twiddle.net>
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.
Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [crisµblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: Thomas Huth <thuth@redhat.com>
