Aleksandar Rikalo wishes to change his primary mail address for QEMU.
Some minor line order is corrected in .mailmap to be alphabetical,
too.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571826227-10583-4-git-send-email-aleksandar.markovic@rt-rk.com>
Mostly fix errors and warnings reported by 'checkpatch.pl -f'.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571826227-10583-3-git-send-email-aleksandar.markovic@rt-rk.com>
Mostly fix errors and warnings reported by 'checkpatch.pl -f'.
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571826227-10583-2-git-send-email-aleksandar.markovic@rt-rk.com>
- qcow2: Fix data corruption bug that is triggered in partial cluster
allocation with default options
- qapi: add support for blkreplay driver
- doc: Describe missing generic -blockdev options
- iotests: Fix 118 when run as root
- Minor code cleanups
-----BEGIN PGP SIGNATURE-----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=JZpU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Fix data corruption bug that is triggered in partial cluster
allocation with default options
- qapi: add support for blkreplay driver
- doc: Describe missing generic -blockdev options
- iotests: Fix 118 when run as root
- Minor code cleanups
# gpg: Signature made Fri 25 Oct 2019 14:19:04 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
qcow2: Fix corruption bug in qcow2_detect_metadata_preallocation()
coroutine: Add qemu_co_mutex_assert_locked()
doc: Describe missing generic -blockdev options
block/backup: drop dead code from backup_job_create
blockdev: Use error_report() in hmp_commit()
iotests: Skip read-only cases in 118 when run as root
qapi: add support for blkreplay driver
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qcow2_detect_metadata_preallocation() calls qcow2_get_refcount() which
requires s->lock to be taken to protect its accesses to the refcount
table and refcount blocks. However, nothing in this code path actually
took the lock. This could cause the same cache entry to be used by two
requests at the same time, for different tables at different offsets,
resulting in image corruption.
As it would be preferable to base the detection on consistent data (even
though it's just heuristics), let's take the lock not only around the
qcow2_get_refcount() calls, but around the whole function.
This patch takes the lock in qcow2_co_block_status() earlier and asserts
in qcow2_detect_metadata_preallocation() that we hold the lock.
Fixes: 69f47505ee
Cc: qemu-stable@nongnu.org
Reported-by: Michael Weiser <michael.weiser@gmx.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Some functions require that the caller holds a certain CoMutex for them
to operate correctly. Add a function so that they can assert the lock is
really held.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
We added more generic options after introducing -blockdev and forgot to
update the documentation (man page and --help output) accordingly. Do
that now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
After commit 00e30f05de, there is no more "goto error" points
after job creation, so after "error:" @job is always NULL and we don't
need roll-back job creation.
Reported-by: Coverity (CID 1406402)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of using monitor_printf() to report errors, hmp_commit() should
use error_report() like other places do.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Some tests in 118 use chmod to remove write permissions from the file
and assume that the image can indeed not be opened read-write
afterwards. This doesn't work when the test is run as root, because root
can still open the file as writable even when the permission bit isn't
set.
Introduce a @skip_if_root decorator and use it in 118 to skip the tests
in question when the script is run as root.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This patch adds support for blkreplay driver to the blockdev options.
Now blkreplay can be used with -blockdev command line option
in the following format:
-blockdev driver=blkreplay,image=file-node-name,node-name=replay-node-name
This option makes possible implementation of the better command
line support for record/replay invocations.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QEMU does not wait for completed I/O requests, assuming that the guest
driver will reset the device before calling unrealize(). This does not
happen on Windows, and QEMU crashes in virtio_notify(), getting the
result of a completed I/O request on hot-unplugged device.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20191018142856.31870-1-jusual@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* raspi boards: some cleanup
* raspi: implement the bcm2835 system timer device
* raspi: implement a dummy thermal sensor
* misc devices: switch to ptimer transaction API
* cache TB flag state to improve performance of cpu_get_tb_cpu_state
* aspeed: Add an AST2600 eval board
-----BEGIN PGP SIGNATURE-----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=hcWd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20191025' into staging
target-arm queue:
* raspi boards: some cleanup
* raspi: implement the bcm2835 system timer device
* raspi: implement a dummy thermal sensor
* misc devices: switch to ptimer transaction API
* cache TB flag state to improve performance of cpu_get_tb_cpu_state
* aspeed: Add an AST2600 eval board
# gpg: Signature made Fri 25 Oct 2019 13:11:25 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20191025: (42 commits)
hw/arm/highbank: Use AddressSpace when using write_secondary_boot()
hw/arm/raspi: Use AddressSpace when using arm_boot::write_secondary_boot
hw/arm/bcm2836: Rename cpus[] as cpu[].core
hw/arm/bcm2836: Make the SoC code modular
hw/arm/bcm2835_peripherals: Use the SYS_timer
hw/timer/bcm2835: Add the BCM2835 SYS_timer
hw/arm/bcm2835_peripherals: Use the thermal sensor block
hw/misc/bcm2835_thermal: Add a dummy BCM2835 thermal sensor
hw/watchdog/milkymist-sysctl.c: Switch to transaction-based ptimer API
hw/m68k/mcf5206.c: Switch to transaction-based ptimer API
hw/timer/grlib_gptimer.c: Switch to transaction-based ptimer API
hw/timer/slavio_timer.c: Switch to transaction-based ptimer API
hw/timer/slavio_timer: Remove useless check for NULL t->timer
hw/dma/xilinx_axidma.c: Switch to transaction-based ptimer API
hw/timer/xilinx_timer.c: Switch to transaction-based ptimer API
hw/net/fsl_etsec/etsec.c: Switch to transaction-based ptimer API
target/arm: Rely on hflags correct in cpu_get_tb_cpu_state
linux-user/arm: Rebuild hflags for TARGET_WORDS_BIGENDIAN
linux-user/aarch64: Rebuild hflags for TARGET_WORDS_BIGENDIAN
target/arm: Rebuild hflags for M-profile NVIC
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
write_secondary_boot() is used in SMP configurations where the
CPU address space might not be the main System Bus.
The rom_add_blob_fixed_as() function allow us to specify an
address space. Use it to write each boot blob in the corresponding
CPU address space.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20191019234715.25750-15-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
write_secondary_boot() is used in SMP configurations where the
CPU address space might not be the main System Bus.
The rom_add_blob_fixed_as() function allow us to specify an
address space. Use it to write each boot blob in the corresponding
CPU address space.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20191019234715.25750-11-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As we are going to add more core-specific fields, add a 'cpu'
structure and move the ARMCPU field there as 'core'.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20191019234715.25750-7-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This file creates the BCM2836/BCM2837 blocks.
The biggest differences with the BCM2838 we are going to add, are
the base addresses of the interrupt controller and the peripherals.
Add these addresses in the BCM283XInfo structure to make this
block more modular. Remove the MCORE_OFFSET offset as it is
not useful and rather confusing.
Reviewed-by: Esteban Bosse <estebanbosse@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20191019234715.25750-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect the recently added SYS_timer.
Now U-Boot does not hang anymore polling a free running counter
stuck at 0.
This timer is also used by the Linux kernel thermal subsystem.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20191019234715.25750-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Map the thermal sensor in the BCM2835 block.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20191019234715.25750-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will soon implement the SYS_timer. This timer is used by Linux
in the thermal subsystem, so once available, the subsystem will be
enabled and poll the temperature sensors. We need to provide the
minimum required to keep Linux booting.
Add a dummy thermal sensor returning ~25°C based on:
https://github.com/raspberrypi/linux/blob/rpi-5.3.y/drivers/thermal/broadcom/bcm2835_thermal.c
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20191019234715.25750-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switch the milkymist-sysctl code away from bottom-half based
ptimers to the new transaction-based ptimer API. This just requires
adding begin/commit calls around the various places that modify the
ptimer state, and using the new ptimer_init() function to create the
timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191021141040.11007-1-peter.maydell@linaro.org
Switch the mcf5206 code away from bottom-half based ptimers to
the new transaction-based ptimer API. This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191021140600.10725-1-peter.maydell@linaro.org
Switch the grlib_gptimer code away from bottom-half based ptimers to
the new transaction-based ptimer API. This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191021134357.14266-3-peter.maydell@linaro.org
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switch the slavio_timer code away from bottom-half based ptimers to
the new transaction-based ptimer API. This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191021134357.14266-4-peter.maydell@linaro.org
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
virtio_device_stop_ioeventfd() has not been used since commit
310837de6c ("virtio: introduce
grab/release_ioeventfd to fix vhost") in 2016.
Nowadays ioeventfd is stopped implicitly by the virtio transport when
lifecycle events such as the VM pausing or device unplug occur.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191021150343.30742-1-stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement the VIRTIO 1.0 virtio-pci interface. The main change here is
that the register layout is no longer a fixed layout in BAR 0. Instead
we have to iterate of PCI Capabilities to find descriptions of where
various registers are located. The vring registers are also more
fine-grained, allowing for more flexible vring layouts, but we don't
take advantage of that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20191023100425.12168-17-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
The current libqos virtio-pci.c code implements the VIRTIO Legacy
interface. Extract existing code in preparation for VIRTIO 1.0 support.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191023100425.12168-16-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Legacy virtio-pci interface always uses BAR 0. VIRTIO 1.0 may need
to use a different BAR index, so make it configurable.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191023100425.12168-15-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VIRTIO 1.0 code will need to perform additional steps but it will
reuse the common virtqueue setup/cleanup code. Make these functions
public.
Make sure to invoke callbacks via QVirtioBus instead of directly calling
the virtio-pci Legacy versions of these functions.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191023100425.12168-14-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The MSI-X vectors are programmed differently in the VIRTIO 1.0 and
Legacy interfaces. Introduce callbacks so different implementations can
be used depending on the interface version.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191023100425.12168-13-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of just passing the vring page frame number, pass the full
QVirtQueue. This will allow the VIRTIO 1.0 transport to program the
fine-grained vring address registers in the future.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191023100425.12168-12-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO 1.0 PCI devices have multiple PCI_CAP_ID_VNDR capabilities so we
need a way to iterate over them. Extend qpci_find_capability() to take
the last address.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
--
v3:
* Document qpci_find_capability()
Message-Id: <20191023100425.12168-11-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO 1.0 uses little-endian for the vring. Legacy VIRTIO uses guest
endianness. Adjust the code to handle both.
Note that qvirtio_readq() is not defined because it has no users. All
the other accessors are really needed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191023100425.12168-10-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Device initialization has an extra step in VIRTIO 1.0. The FEATURES_OK
status bit is set to indicate that feature negotiation has completed.
The driver then reads the status register again to check that the device
agrees with the final features.
Implement this step as part of qvirtio_set_features() instead of
introducing a separate function. This way all existing code works
without modifications.
The check in qvirtio_set_driver_ok() needs to be updated because
FEATURES_OK will be set for VIRTIO 1.0 devices.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191023100425.12168-9-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth" <thuth@redhat.com>
According to VIRTIO 1.1 "3.1.1 Driver Requirements: Device
Initialization", configuration space and virtqueues cannot be accessed
before features have been negotiated. Enforce this requirement.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191023100425.12168-8-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
VIRTIO Device Initialization requires feature negotiation. The libqos
virtio-9p driver lacks feature negotiation and is therefore
non-compliant.
libqos tests acknowledge all feature bits advertised by the device,
except VIRTIO_F_BAD_FEATURE (which devices use to detect broken
drivers!) and VIRTIO_RING_F_EVENT_IDX (which is not implemented in
libqos and accepting it would break notifications).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191023100425.12168-7-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth" <thuth@redhat.com>
VIRTIO Device Initialization requires that feature negotiation has
completed before virtqueues are set up. This makes sense because the
driver must know whether it is operating in Legacy or VIRTIO 1.0 mode
before it can access vring fields with the correct endianness.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191023100425.12168-6-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO Device Initialization requires feature negotiation. Currently
virtio-scsi-test.c is non-compliant.
libqos tests acknowledge all feature bits advertised by the device,
except VIRTIO_F_BAD_FEATURE (which devices use to detect broken
drivers!) and VIRTIO_RING_F_EVENT_IDX (which is not implemented in
libqos and accepting it would break notifications).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191023100425.12168-5-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth" <thuth@redhat.com>
In VIRTIO 1.0 feature bits changed from 32-bit to 64-bit. (In fact, the
transports allow even more feature bits but nothing uses more than 64
bits today.)
Add 64-bit feature bit support to virtio-mmio and virtio-pci. This will
be necessary for VIRTIO 1.0 support.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191023100425.12168-4-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
