Commit 74c4912f09 changed check_tlb_flush() to use
tlb_flush_all_cpus_synced() instead of calling tlb_flush() on each
CPU. However, as side effect of this, a CPU executing a ptesync
after a tlbie will have its TLB flushed only after exiting its
current Translation Block (TB).
This causes memory accesses to invalid pages to succeed, if they
happen to be on the same TB as the ptesync.
To fix this, use tlb_flush_all_cpus() instead, that immediately
flushes the TLB of the CPU executing the ptesync instruction.
Fixes: 74c4912f09 ("target/ppc: Fix synchronization of mttcg with broadcast TLB flushes")
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220503163904.22575-1-leandro.lupori@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_de macro hides the usage of env->msr, which is a bad
behavior. Substitute it with FIELD_EX64 calls that explicitly use
env->msr as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-21-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ep macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-17-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_dr macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-16-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ir macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-15-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_gs macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-12-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_pow macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-10-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Per E500 core reference manual [1], chapter 8.4.4 "Branch Taken Debug
Event" and chapter 8.4.5 "Instruction Complete Debug Event":
"A branch taken debug event occurs if both MSR[DE] and DBCR0[BRT]
are set ... Branch taken debug events are not recognized if MSR[DE]
is cleared when the branch instruction executes."
"An instruction complete debug event occurs when any instruction
completes execution so long as MSR[DE] and DBCR0[ICMP] are both
set ... Instruction complete debug events are not recognized if
MSR[DE] is cleared at the time of the instruction execution."
Current codes do not check MSR.DE bit before setting HFLAGS_SE and
HFLAGS_BE flag, which would cause the immediate debug interrupt to
be generated, e.g.: when DBCR0.ICMP bit is set by guest software
and MSR.DE is not set.
[1] https://www.nxp.com/docs/en/reference-manual/E500CORERM.pdf
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Lucas Mateus Castro <lucas.araujo@eldorado.org.br>
Message-Id: <20220421011729.1148727-1-bmeng.cn@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Let's leave cpu_init with just generic CPU initialization and
QOM-related functions.
The rest of the SPR registration functions will be moved in the
following patches along with the code that uses them. These are only
the commonly used ones.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-28-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The PowerPC 601 processor is the first generation of processors to
implement the PowerPC architecture. It was designed as a bridge
processor and also could execute most of the instructions of the
previous POWER architecture. It was found on the first Macs and IBM
RS/6000 workstations.
There is not much interest in keeping the CPU model of this
POWER-PowerPC bridge processor. We have the 603 and 604 CPU models of
the 60x family which implement the complete PowerPC instruction set.
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203142756.1302515-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
POWERPC_MMU_BOOKE is not a mask and should not be tested with a
bitwise AND operator.
It went unnoticed because it only impacts the 601 CPU implementation
for which we don't have a known firmware image.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220124081609.3672341-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
cpu_interrupt_exittb() was introduced by commit 044897ef4a
("target/ppc: Fix system lockups caused by interrupt_request state
corruption") as a way to wrap cpu_interrupt() helper in BQL.
After that, commit 6d38666a89 ("ppc: Ignore the CPU_INTERRUPT_EXITTB
interrupt with KVM") added a condition to skip this interrupt if we're
running with KVM.
Problem is that the change made by the above commit, testing for
!kvm_enabled() at the start of cpu_interrupt_exittb():
static inline void cpu_interrupt_exittb(CPUState *cs)
{
if (!kvm_enabled()) {
return;
}
(... do cpu_interrupt(cs, CPU_INTERRUPT_EXITTB) ...)
is doing the opposite of what it intended to do. This will return
immediately if not kvm_enabled(), i.e. it's a emulated CPU, and if
kvm_enabled() it will proceed to fire CPU_INTERRUPT_EXITTB.
Fix the 'skip KVM' condition so the function is a no-op when
kvm_enabled().
CC: Greg Kurz <groug@kaod.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/809
Fixes: 6d38666a89 ("ppc: Ignore the CPU_INTERRUPT_EXITTB interrupt with KVM")
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220121160841.9102-1-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is the combination of frozen bit and counter type, on a per
counter basis. So far this is only used by HFLAGS_INSN_CNT, but
will be used more later.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[danielhb: fixed PMC4 cyc_cnt shift, insn run latch code,
MMCR0_FC handling, "PMC[1-6]" comment]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220103224746.167831-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The PMU is already counting cycles by calculating time elapsed in
nanoseconds. Counting instructions is a different matter and requires
another approach.
This patch adds the capability of counting completed instructions (Perf
event PM_INST_CMPL) by counting the amount of instructions translated in
each translation block right before exiting it.
A new pmu_count_insns() helper in translation.c was added to do that.
After verifying that the PMU is counting instructions, call
helper_insns_inc(). This new helper from power8-pmu.c will add the
instructions to the relevant counters. It'll also be responsible for
triggering counter negative overflows as it is already being done with
cycles.
To verify whether the PMU is counting instructions or now, a new hflags
named 'HFLAGS_INSN_CNT' is introduced. This flag will match the internal
state of the PMU. We're be using this flag to avoid calling
helper_insn_inc() when we do not have a valid instruction event being
sampled.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211201151734.654994-7-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We're going to add PMU support for TCG PPC64 chips, based on IBM POWER8+
emulation and following PowerISA v3.1. This requires several PMU related
registers to be exposed to userspace (problem state). PowerISA v3.1
dictates that the PMCC bits of the MMCR0 register controls the level of
access of the PMU registers to problem state.
This patch start things off by exposing both PMCC bits to hflags,
allowing us to access them via DisasContext in the read/write callbacks
that we're going to add next.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211018010133.315842-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a Host Radix field (hr) in DisasContext with LPCR[HR] value to allow
us to decide between Radix and HPT while validating instructions
arguments. Note that PowerISA v3.1 does not require LPCR[HR] and PATE.HR
to match if the thread is in ultravisor/hypervisor real addressing mode,
so ctx->hr may be invalid if ctx->hv and ctx->dr are set.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210917114751.206845-2-matheus.ferst@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
moved store_40x_sler from mmu_common.c to helper_regs.c as it is
a function to store a value in a special purpose register, so
moving it to a file focused in special register manipulation
is more appropriate.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Message-Id: <20210723175627.72847-4-lucas.araujo@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Verify that hflags was updated correctly whenever we change
cpu state that is used by hflags.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-11-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We weren't recording MSR_GS in hflags, which means that BookE
memory accesses were essentially random vs Guest State.
Instead of adding this bit directly, record the completed mmu
indexes instead. This makes it obvious that we are recording
exactly the information that we need.
This also means that we can stop directly recording MSR_IR.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-9-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Nothing within the translator -- or anywhere else for that
matter -- checks MSR_SA or MSR_AP on the 602. This may be
a mistake. However, for the moment, we need not record these
bits in hflags.
This allows us to simplify HFLAGS_VSX computation by moving
it to overlap with MSR_VSX.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-8-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Because this bit was not in hflags, the privilege check
for tlb instructions was essentially random.
Recompute hflags when storing to LPCR.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-7-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Because these bits were not in hflags, the code generated
for single-stepping on BookE was essentially random.
Recompute hflags when storing to dbcr0.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-5-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Copying flags directly from msr has drawbacks: (1) msr bits
mean different things per cpu, (2) msr has 64 bits on 64 cpus
while tb->flags has only 32 bits.
Create a enum to define these bits. Document the origin of each bit
and validate those bits that must match MSR. This fixes the
truncation of env->hflags to tb->flags, because we no longer
have hflags bits set above bit 31.
Most of the code in ppc_tr_init_disas_context is moved over to
hreg_compute_hflags. Some of it is simple extractions from msr,
some requires examining other cpu flags. Anything that is moved
becomes a simple extract from hflags in ppc_tr_init_disas_context.
Several existing bugs are left in ppc_tr_init_disas_context, where
additional changes are required -- to be addressed in future patches.
Remove a broken #if 0 block.
Reported-by: Ivan Warren <ivan@vmfacility.fr>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-3-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We have eliminated all normal uses of hflags_nmsr. We need
not even compute it except when we want to migrate. Rename
the field to emphasize this.
Remove the fixme comment for migrating access_type. This value
is only ever used with the current executing instruction, and
is never live when the cpu is halted for migration.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210315184615.1985590-6-richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Keep all hflags computation in one place, as this will be
especially important later.
Introduce a new POWERPC_FLAG_HID0_LE bit to indicate when
LE should be taken from HID0. This appears to be set if
and only if POWERPC_FLAG_RTC_CLK is set, but we're not
short of bits and having both names will avoid confusion.
Note that this was the only user of hflags_nmsr, so we can
perform a straight assignment rather than mask and set.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210315184615.1985590-3-richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move the functions to a new file, helper_regs.c.
Note int_helper.c was relying on helper_regs.h to
indirectly include qemu/log.h.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210315184615.1985590-2-richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
