The old VHD_MAX_SECTORS value is incorrect, and is a throwback
to the CHS calculations. The VHD specification allows images up to 2040
GiB, which (using 512 byte sectors) corresponds to a maximum number of
sectors of 0xff000000, rather than the old value of 0xfe0001ff.
Update VHD_MAX_SECTORS to reflect the correct value.
Also, update comment references to the actual size limit, and correct
one compare so that we can have sizes up to the limit.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
XenConverter VHD images are another VHD image where current_size is
different from the CHS values in the the format header. Use
current_size as the default, by looking at the creator_app signature
field.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The vpc driver has two methods of determining virtual disk size. The
correct one to use depends on the software that generated the image
file. Add the XenServer creator_app signature so that image size is
correctly detected for those images.
Reported-by: Grant Wu <grantwwu@gmail.com>
Reported-by: Spencer Baugh <sbaugh@catern.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add more useful error information to failure paths in vpc_create().
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 57d6a428 broke blk_aio_write_zeroes() because in some write
functions in the call path don't have an explicit length argument but
reuse qiov->size instead. Which is great, except that write_zeroes
doesn't have a qiov, which this commit interprets as 0 bytes.
Consequently, blk_aio_write_zeroes() didn't effectively do anything.
This patch introduces an explicit acb->bytes in BlkAioEmAIOCB and uses
that instead of acb->rwco.size.
The synchronous version of the function is okay because it does pass a
qiov (with the right size and a NULL pointer as its base).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Accoding the chapter 7.6 Trap Processing of the SPARC Architecture Manual v9,
the Trap Based Address Register is not modified as a trap is taken.
This fix allows booting FreeBSD-10.3-RELEASE-sparc64.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fix register offset calculation when regwptr is used.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Minor fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXD58TAAoJECgfDbjSjVRpDCAH/iZXlMxl4j23qH4mqJa88HJq
UHqsuU6NGHXhsYUzGy9wQp7RTNnMlwF1GC+vsIlZzr1XPu/U/GwUZVPf1Ca0xZ0Q
ukRzd7nvAaHnUEC26AJul8CgoThmPf5ip4LqAqQvSUrrAsQ1viR49HHCtmFC2w33
iOg9ZznZM+Prlh8IGMCSF93ER9l4s7T2CvDPmlKtC5iXepU8J47V2EmPg3VjCd3B
jeQ6RIF0RtJQCvUxLW3FcUnM6bmIszqPEwmBkiOfJcvuNisNMZGavAyzzoXfMmQ9
YkrGEnDwLa5a3qMTptmxDvPzy4ksc7OzVIw0bcBnqnGmDJwGz44mBjYJ555zJi8=
=ufoF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
tpm, vhost, virtio: fixes for 2.6
Minor fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 14 Apr 2016 14:45:55 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
hw/virtio/balloon: Replace TARGET_PAGE_SIZE with BALLOON_PAGE_SIZE
tpm: Fix write to file descriptor function
tpm: acpi: remove IRQ from TPM's CRS to make Windows not see conflict
pc: acpi: tpm: add missing MMIO resource to PCI0._CRS
specs/vhost-user: spelling fix
specs/vhost-user: improve VHOST_SET_VRING_NUM documentation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The balloon code currently calls madvise() with TARGET_PAGE_SIZE as
length parameter. Since the virtio-balloon protocol is always based
on 4k pages, no matter what the host and guest are using as page size,
this could cause problems: If TARGET_PAGE_SIZE is bigger than 4k, the
madvise call also destroys the 4k areas after the current one - which
might be wrong since the guest did not want free that area yet (in
case the guest used as smaller MMU page size than the hard-coded
TARGET_PAGE_SIZE). So to fix this issue, introduce a proper define
called BALLOON_PAGE_SIZE (which is 4096) to use this as the size
parameter for the madvise() call instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix a bug introduced in commit 46f296c while moving send_all to the
tpm_passthrough code. Fix the name of the variable used in the loop.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
IRQ 5 used by TPM conflicts with PNP0C0F IRQs,
as result Windows fails driver initialization with reason
'device cannot find enough free resources'
But if TPM._CRS.IRQ entry is commented out, Windows
seems to initialize driver without errors as it doesn't
notice possible conflict and it seems to work
probably due to a link with IRQ 5 being unused/disabled.
So temporary comment out TPM._CRS.IRQ to 'fix'
regression in TPM, with intent to fix it correctly
later i.e.:
1. pick unused IRQ as default one for TPM
2. fetch IRQ value from device model so that user
could override default one if it conflicts with
some other device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Windows will fail initialize TMP driver with the reason:
'device cannot find enough free resources'
That happens because parent BUS doesn't describe
MMIO resources used by TPM child device.
Fix it by describing it in top-most parent bus scope PCI0.
It was 'regressed' by commit
5cb18b3d TPM2 ACPI table support
with following fixup
9e472263 acpi: add missing ssdt
which did the right thing by moving TPM to BUS
it belongs to but lacked a proper resource declaration.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
"number of vrings" doesn't help me understand the purpose of this
message. My understanding is that it is rather the size of the queue (in
modern terms).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO_INPUT_CFG_ABS_INFO was not implemented for pass-through input
devices. This patch follows the existing design and pre-fetches the
config for all absolute axes using EVIOCGABS at realize time.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1460558603-18331-1-git-send-email-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Read absolute and relative axis information, only classify
devices as mouse/tablet in case the x axis is present.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The reported maximum was wrong. The X and Y coordinates are 0-based
so if size is 8000 maximum must be 7FFF.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1460128893-10244-1-git-send-email-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
virtio-input is simple enough that it doesn't need to xfer any state.
Still we have to wire up savevm manually, so the generic pci and virtio
are saved correctly.
Additionally we need to do some post-load processing to figure whenever
the guest uses the device or not, so we can give input routing hints to
the qemu input layer using qemu_input_handler_{activate,deactivate}.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1459859501-16965-1-git-send-email-kraxel@redhat.com
The write path for pass-through devices, commonly used for controlling
keyboard LEDs via EV_LED, was not implemented. This commit adds the
necessary plumbing to connect the status virtio queue to the host evdev
file descriptor.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1459511146-12060-1-git-send-email-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
VIRTIO_INPUT_CFG_EV_BITS with subsel of EV_LED was always
returning an empty bitmap for pass-through input devices.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1459418028-7473-1-git-send-email-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
KEY_PAUSE is flat out missing. KEY_SYSRQ already has a keycode
assigned but it's not what I'm seeing on my system. The mapping
doesn't appear to have to be unique so both keycodes now map to
KEY_SYSRQ which is what the "Keyboard PrintScreen", HID usage ID
0x46, translates to.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1459343240-19483-1-git-send-email-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
"_x" must be "(_x)" otherwise things fail if you pass in expressions.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1460440299-26654-1-git-send-email-kraxel@redhat.com
"qemu -device ivshmem-{plain,doorbell}" will crash, because the device
doesn't check that the required argument is provided. (screwed up in
commit 5400c02)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Restart of ATAPI DMA used to be unreachable, because the request to do
so wasn't indicated in bus->error_status due to the lack of spare bits, and
ide_restart_bh() would return early doing nothing.
This patch makes use of the observation that not all bit combinations were
possible in ->error_status. In particular, IDE_RETRY_READ only made sense
together with IDE_RETRY_DMA or IDE_RETRY_PIO. This allows to re-use
IDE_RETRY_READ alone as an indicator of ATAPI DMA restart request.
To makes things more uniform, ATAPI DMA gets its own value for ->dma_cmd.
As a means against confusion, macros are added to test the state of
->error_status.
The patch fixes the restart of both in-flight and pending ATAPI DMA,
following the scheme similar to that of IDE DMA.
[Including a fixup patch:
Message-id: 1460465594-15777-1-git-send-email-pbutsykin@virtuozzo.com
--js]
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1459924806-306-4-git-send-email-den@openvz.org
Signed-off-by: John Snow <jsnow@redhat.com>
ide_atapi_dma_restart() used to just complete the DMA with an error,
under the assumption that there isn't enough information to restart it.
However, as the contents of the ->io_buffer is preserved, it looks safe to
just re-evaluate it and dispatch the ATAPI command again.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1459924806-306-3-git-send-email-den@openvz.org
Signed-off-by: John Snow <jsnow@redhat.com>
If the migration occurs after the IDE DMA has been set up but before it
has been initiated, the state gets lost upon save/restore. Specifically,
->dma_cb callback gets cleared, so, when the guest eventually starts bus
mastering, the DMA never completes, causing the guest to time out the
operation.
OTOH all the infrastructure is already in place to restart the DMA if
the migration happens while the DMA is in progress.
So reuse that infrastructure, by setting bus->error_status based on
->dma_cmd in pre_save if ->dma_cb callback is already set but DMAING is
clear. This will indicate the need for restart and make sure ->dma_cb
is restored in ide_restart_bh(); howeover since DMAING is clear the state
upon restore will be exactly "ready for DMA" as before the save.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1459924806-306-2-git-send-email-den@openvz.org
Signed-off-by: John Snow <jsnow@redhat.com>
After commit e5e7855 (blockdev: Separate BB name management), starting a
guest with PVHVM support result in this assert:
qemu-system-i386: block/block-backend.c:173: blk_delete: Assertion `!blk->name' failed.
A backtrace show that a caller is pci_piix3_xen_ide_unplug().
This patch fix it.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-id: 1460382666-29885-1-git-send-email-anthony.perard@citrix.com
Signed-off-by: John Snow <jsnow@redhat.com>
In commit ac0487e1 ("xenfb.c: avoid expensive loops when prod <=
out_cons"), ">=" was used. In fact, a full ring is a legit state.
Correct the test to use ">".
Reported-by: "Hao, Xudong" <xudong.hao@intel.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: "Hao, Xudong" <xudong.hao@intel.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJXDR31AAoJEH8JsnLIjy/WhJwP/j6TwEN/atc/qvXAvJtOCM10
EhmgPLV4xBLHjuMDxF9k+6wGAk8szpR/az/cNG7xRSAL2bVyGDSZm2E1Cy6kGwlb
dDzPO24GhJqC55ukWn/L7UPQWsFLjjCypdCWMxIS8AzQzzfnt78PPG4SoJJVkldl
w/uHC77cjaY8HNrB5GMVydXHfZQ/s5cEutlbJ3vbwELXncx3uhb1zwBoEOE/R99+
20c3IC+mGNIcvhn3jQmialpb+DHNRAfpFdVsOtHmq/xdz8oK1wvd4MnBDwQTJkLQ
qcNz8DHRXvuiPaDVA9qL0Xct7BsvEQAlDaTNo901ZUdrdToVBg8pqbPCnygwAlNQ
5cL7a1XBsNvPFjMA+Z+PNqz3ErCP8I764eVsM36IcoFleF5+NSWkfWNAa3vtic5Z
LauD2QUjGmY8hNS2zC1PHQJlTGuRM2Fz9PUwwSsAV4oueSgdqv4enYKMYvfmYhP7
4BxJA8R3pVXxKcCEQKNJkzgZC2gB/slF2qMYDUONsxgG2lw8w15YRj07tHM0auZ4
ih5f5pSTzyrETFYuJx0mySMlE04HP+pUnkP5n1w6xOXpmUi9FGul8hskyya0nHtP
ojRIkrJSNF9+uByRmeCTKX1XgpWnaWKcypRDSv5MJmx2r1hFpCv5GH/buqRqjZhW
KvogJBpja9MZrTefbW4E
=UMTj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches for 2.6
# gpg: Signature made Tue 12 Apr 2016 17:10:29 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
qemu-iotests: iotests.py: get rid of __all__
qemu-iotests: 068: don't require KVM
qemu-iotests: 148: properly skip test if quorum support is missing
qemu-iotests: iotests.VM: remove qtest socket on error
qemu-iotests: fix 051 on non-PC architectures
qemu-iotests: check: don't place files with predictable names in /tmp
MAINTAINERS: Block layer core, qcow2 and blkdebug
qcow2: Prevent backing file names longer than 1023
vpc: fix return value check for blk_pwrite
iotests: Make 150 use qemu-img map instead of du
block: initialize qcrypto API at startup
qemu-img: fix formatting of error message
iotests: fix the broken 026.nocache output
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJXDR10AAoJEDuxQgLoOKyt8AkH/jSZYxLCUEBZRJPEaOl5JyfV
qxNzWHlfkKHP6zC1PQHt9mCYAsMmAzz7v3+zr/tQbOOlDoUJsROe8RqSvrlDpHPG
WeuSpWZx0xcSq9FNChp3VvJiM/Hb22Fu0a8GODKH9GnnRvfgRdPuXL0bh7RpdxN8
kcdfdBSAAhBTJI1+q+smJxexelx+UDYFcg6CPX0AKET7I79bNg/ZLvosYcYUezuh
Tur6V7OCqY1AFhu0oGc1p3Wtf0jBFPPkXylqx6jWhJIW7kWwDho6nh0zhnQjDufi
KXp560/bcpK0zdan6kTlp5gyo6Ym8hF1sPYNjIelf5T8+z4P5pS2ysaCOlhrGgM=
=DmtA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2016-04-12' into queue-block
Block patches for 2.6-rc2.
# gpg: Signature made Tue Apr 12 18:08:20 2016 CEST using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
* mreitz/tags/pull-block-for-kevin-2016-04-12:
qemu-iotests: iotests.py: get rid of __all__
qemu-iotests: 068: don't require KVM
qemu-iotests: 148: properly skip test if quorum support is missing
qemu-iotests: iotests.VM: remove qtest socket on error
qemu-iotests: fix 051 on non-PC architectures
qemu-iotests: check: don't place files with predictable names in /tmp
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The __all__ list contained a typo for as long as the iotests module
existed. That typo prevented "from iotests import *" (which is the
only case where iotests.__all__ is used at all) from ever working.
The names used by iotests are highly prone to name collisions, so
importing them all unconditionally is a bad idea anyway. Since __all__
is not adding any value, let's just get rid of it.
Fixes: f345cfd0 ("qemu-iotests: add iotests Python module")
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1459848109-29756-8-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
None of the other test cases explicitly enable KVM and there's no
obvious reason for 068 to require it. Drop this so all test cases can be
executed in environments where KVM is not available (e.g. because the
user doesn't have sufficient permissions to access /dev/kvm).
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1459848109-29756-6-git-send-email-silbe@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
qemu-iotests test case 148 already had some code for skipping the test
if quorum support is missing, but it didn't work in all
cases. TestQuorumEvents.setUp() gets run before the actual test class
(which contains the skipping code) and tries to start qemu with a drive
using the quorum driver. For some reason this works fine when using
qcow2, but fails for raw.
As the entire test case requires quorum, just check for availability
before even starting the test suite. Introduce a verify_quorum()
function in iotests.py for this purpose so future test cases can make
use of it.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1459848109-29756-5-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
On error, VM.launch() cleaned up the monitor unix socket, but left the
qtest unix socket behind. This caused the remaining sub-tests to fail
with EADDRINUSE:
+======================================================================
+ERROR: testQuorum (__main__.TestFifoQuorumEvents)
+----------------------------------------------------------------------
+Traceback (most recent call last):
+ File "148", line 63, in setUp
+ self.vm.launch()
+ File "/home6/silbe/qemu/tests/qemu-iotests/iotests.py", line 247, in launch
+ self._qmp.accept()
+ File "/home6/silbe/qemu/tests/qemu-iotests/../../scripts/qmp/qmp.py", line 141, in accept
+ return self.__negotiate_capabilities()
+ File "/home6/silbe/qemu/tests/qemu-iotests/../../scripts/qmp/qmp.py", line 57, in __negotiate_capabilities
+ raise QMPConnectError
+QMPConnectError
+
+======================================================================
+ERROR: testQuorum (__main__.TestQuorumEvents)
+----------------------------------------------------------------------
+Traceback (most recent call last):
+ File "148", line 63, in setUp
+ self.vm.launch()
+ File "/home6/silbe/qemu/tests/qemu-iotests/iotests.py", line 244, in launch
+ self._qtest = qtest.QEMUQtestProtocol(self._qtest_path, server=True)
+ File "/home6/silbe/qemu/tests/qemu-iotests/../../scripts/qtest.py", line 33, in __init__
+ self._sock.bind(self._address)
+ File "/usr/lib64/python2.7/socket.py", line 224, in meth
+ return getattr(self._sock,name)(*args)
+error: [Errno 98] Address already in use
Fix this by cleaning up both the monitor socket and the qtest socket iff
they exist.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1459848109-29756-4-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit 61de4c68 [block: Remove BDRV_O_CACHE_WB] updated the reference
output for PCs, but neglected to do the same for the generic reference
output file. Fix 051 on all non-PC architectures by applying the same
change to the generic output file.
Fixes: 61de4c68 ("block: Remove BDRV_O_CACHE_WB")
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1459848109-29756-3-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Placing files with predictable or even hard-coded names in /tmp is a
security risk and can prevent or disturb operation on a multi-user
machine. Place them inside the "scratch" directory instead, as we
already do for most other test-related files.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1459848109-29756-2-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
As agreed with Kevin and already practiced for a while, I am adding
myself as co-maintainer of the block layer core, qcow2 and blkdebug.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We reject backing file names with a length of more than 1023 characters
when opening a qcow2 file, so we should not produce such files
ourselves.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_pwrite_sync used to return zero or negative error, while blk_pwrite returns
the number of written bytes when successful. This caused VPC image creation
to fail spectacularly: it wrote the first 512 bytes, and then exited immediately
because of the non-zero answer from blk_pwrite. But the truly spectacular part
is that it returns a positive value (the 512 that blk_pwrite returned) causing
everyone to believe that it succeeded.
This fixes qemu-iotests with vpc format.
Fixes: b8f45cdf78
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The actual on-disk size of a file does not only depend on factors qemu
can control. Thus, we should not depend on this to determine whether a
file has indeed been fully allocated. Instead, use qemu-img map and hope
that if an area is referenced, it is indeed allocated, too.
Also, limit the supported image formats to raw and qcow2 because the
actual qemu-img map output may depend on the image format.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Any programs which call the qcrypto APIs should ensure that
qcrypto_init() has been called before anything else which
can use crypto. Essentially this means right at the start
of the main method before initializing anything else.
This is important because some versions of gnutls/gcrypt
require explicit initialization before use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Alex Bligh <alex@alex.org.uk>
Tested-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The error_reportf_err() will not automatically append a
': ' before adding its suffix, so we must include that
in the message we pass it, otherwise we get a badly
formatted message lacking whitespace:
qemu-img: Could not open 'driver=nbd,host=127.0.0.1,port=6666,tls-creds=tls0'Failed to connect socket: Connection refused
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch fixes longstanding issue with 026 iotest. Unfortunately,
this test contains 2 versions of the correct output, one for cached
writes and one for non-cached ones. People tends to fix only one
version of output of the test and thus noncached version becomes
broken. Unfortunately, it is default in tests/check-block.sh
The following problematic commits were made:
commit 3b5e14c76a
Author: Max Reitz <mreitz@redhat.com>
Date: Tue Dec 2 18:32:51 2014 +0100
qcow2: Flushing the caches in qcow2_close may fail
commit a069e2f137
Author: John Snow <jsnow@redhat.com>
Date: Fri Feb 6 16:26:17 2015 -0500
blkdebug: fix "once" rule
commit b106ad9185
Author: Kevin Wolf <kwolf@redhat.com>
Date: Fri Mar 28 18:06:31 2014 +0100
qcow2: Don't rely on free_cluster_index in alloc_refcount_block()
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Max Reitz <mreitz@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
