This patch aims to bring the following behavior:
1. We don't load bitmaps, when started in inactive mode. It's the case
of incoming migration. In this case we wait for bitmaps migration
through migration channel (if 'dirty-bitmaps' capability is enabled) or
for invalidation (to load bitmaps from the image).
2. We don't remove persistent bitmaps on inactivation. Instead, we only
remove bitmaps after storing. This is the only way to restore bitmaps,
if we decided to resume source after [failed] migration with
'dirty-bitmaps' capability enabled (which means, that bitmaps were not
stored).
3. We load bitmaps on open and any invalidation, it's ok for all cases:
- normal open
- migration target invalidation with dirty-bitmaps capability
(bitmaps are migrating through migration channel, the are not
stored, so they should have IN_USE flag set and will be skipped
when loading. However, it would fail if bitmaps are read-only[1])
- migration target invalidation without dirty-bitmaps capability
(normal load of the bitmaps, if migrated with shared storage)
- source invalidation with dirty-bitmaps capability
(skip because IN_USE)
- source invalidation without dirty-bitmaps capability
(bitmaps were dropped, reload them)
[1]: to accurately handle this, migration of read-only bitmaps is
explicitly forbidden in this patch.
New mechanism for not storing bitmaps when migrate with dirty-bitmaps
capability is introduced: migration filed in BdrvDirtyBitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Similarly to merge, it's OK to allow clear operations on disabled
bitmaps, as this condition only means that they are not recording
new writes. We are free to clear it if the user requests it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181002230218.13949-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
In prior commits that made merge transactionable, we removed the
assertion that merge cannot operate on disabled bitmaps. In addition,
we want to make sure that we are prohibiting merges to "locked" bitmaps.
Use the new user_locked function to check.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181002230218.13949-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Instead of both frozen and qmp_locked checks, wrap it into one check.
frozen implies the bitmap is split in two (for backup), and shouldn't
be modified. qmp_locked implies it's being used by another operation,
like being exported over NBD. In both cases it means we shouldn't allow
the user to modify it in any meaningful way.
Replace any usages where we check both frozen and qmp_locked with the
new check.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20181002230218.13949-2-jsnow@redhat.com
[w/edits Suggested-By: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>]
Signed-off-by: John Snow <jsnow@redhat.com>
Add backup parameter to bdrv_merge_dirty_bitmap() to be used then with
bdrv_restore_dirty_bitmap() if it needed to restore the bitmap after
merge operation.
This is needed to implement bitmap merge transaction action in further
commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Use more generic names to reuse the function for bitmap merge in the
following commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Move checks from qmp_x_block_dirty_bitmap_merge() to
bdrv_merge_dirty_bitmap(), to share them with dirty bitmap merge
transaction action in future commit.
Note: for now, only qmp_x_block_dirty_bitmap_merge() calls
bdrv_merge_dirty_bitmap().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Bitmap lock/unlock were added to bdrv_enable_dirty_bitmap in
8b1402ce80, but some places were not updated correspondingly, which
leads to trying to take this lock twice, which is dead-lock. Fix this.
Actually, iotest 199 (about dirty bitmap postcopy migration) is broken
now, and this fixes it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180625165745.25259-3-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add _locked version of bdrv_enable_dirty_bitmap, to fix dirty bitmap
migration in the following patch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180625165745.25259-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
This new function allows to look for a consecutively dirty area in a
dirty bitmap.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180613181823.13618-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This new parameter allows the caller to just query the next dirty
position without moving the iterator.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180613181823.13618-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180606182449.1607-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add locks and remove comments about BQL accordingly to
dirty_bitmap_mutex definition in block_int.h.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180606182449.1607-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
QLIST_REMOVE does not require walking the list, and once the "bitmap"
argument is removed from bdrv_do_release_matching_dirty_bitmap_locked
the code simplifies a lot and it is worth inlining everything in the
callers of bdrv_do_release_matching_dirty_bitmap.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180326104037.6894-1-pbonzini@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
All this function is doing will be repeated by
bdrv_do_release_matching_dirty_bitmap_locked, except
resetting bm->persistent. But even that does not matter
because the bitmap will be freed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180323164254.26487-1-pbonzini@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add special state, when qmp operations on the bitmap are disabled.
It is needed during bitmap migration. "Frozen" state is not
appropriate here, because it looks like bitmap is unchanged.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180207155837.92351-5-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180207155837.92351-4-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Like other setters here these functions should take a lock.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180207155837.92351-3-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Enabling bitmap successor is necessary to enable successors of bitmaps
being migrated before target vm start.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180207155837.92351-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
To maintain load/store disabled bitmap there is new approach:
- deprecate @autoload flag of block-dirty-bitmap-add, make it ignored
- store enabled bitmaps as "auto" to qcow2
- store disabled bitmaps without "auto" flag to qcow2
- on qcow2 open load "auto" bitmaps as enabled and others
as disabled (except in_use bitmaps)
Also, adjust iotests 165 and 176 appropriately.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180202160752.143796-1-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The function searches for next zero bit.
Also add interface for BdrvDirtyBitmap and unit test.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20171012135313.227864-2-vsementsov@virtuozzo.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Now that all callers are using byte-based interfaces, there's no
reason for our internal hbitmap to remain with sector-based
granularity. It also simplifies our internal scaling, since we
already know that hbitmap widens requests out to granularity
boundaries.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Both callers already had bytes available, but were scaling to
sectors. Move the scaling to internal code. In the case of
bdrv_aligned_pwritev(), we are now passing the exact offset
rather than a rounded sector-aligned value, but that's okay
as long as dirty bitmap widens start/bytes to granularity
boundaries.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some of the callers were already scaling bytes to sectors; others
can be easily converted to pass byte offsets, all in our shift
towards a consistent byte interface everywhere. Making the change
will also make it easier to write the hold-out callers to use byte
rather than sectors for their iterations; it also makes it easier
for a future dirty-bitmap patch to offload scaling over to the
internal hbitmap. Although all callers happen to pass
sector-aligned values, make the internal scaling robust to any
sub-sector requests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Half the callers were already scaling bytes to sectors; the other
half can eventually be simplified to use byte iteration. Both
callers were already using the result as a bool, so make that
explicit. Making the change also makes it easier for a future
dirty-bitmap patch to offload scaling over to the internal hbitmap.
Remember, asking whether a byte is dirty is effectively asking
whether the entire granularity containing the byte is dirty, since
we only track dirtiness by granularity.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Thanks to recent cleanups, all callers were scaling a return value
of sectors into bytes; do the scaling internally instead.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Thanks to recent cleanups, most callers were scaling a return value
of sectors into bytes (the exception, in qcow2-bitmap, will be
converted to byte-based iteration later). Update the interface to
do the scaling internally instead.
In qcow2-bitmap, the code was specifically checking for an error
return of -1. To avoid a regression, we either have to make sure
we continue to return -1 (rather than a scaled -512) on error, or
we have to fix the caller to treat all negative values as error
rather than just one magic value. It's easy enough to make both
changes at the same time, even though either one in isolation
would work.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All callers to bdrv_dirty_iter_new() passed 0 for their initial
starting point, drop that parameter.
Most callers to bdrv_set_dirty_iter() were scaling a byte offset to
a sector number; the exception qcow2-bitmap will be converted later
to use byte rather than sector iteration. Move the scaling to occur
internally to dirty bitmap code instead, so that callers now pass
in bytes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Right now, the dirty-bitmap code exposes the fact that we use
a scale of sector granularity in the underlying hbitmap to anything
that wants to serialize a dirty bitmap. It's nicer to uniformly
expose bytes as our dirty-bitmap interface, matching the previous
change to bitmap size. The only caller to serialization is currently
qcow2-cluster.c, which becomes a bit more verbose because it is still
tracking sectors for other reasons, but a later patch will fix that
to more uniformly use byte offsets everywhere. Likewise, within
dirty-bitmap, we have to add more assertions that we are not
truncating incorrectly, which can go away once the internal hbitmap
is byte-based rather than sector-based.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are still using an internal hbitmap that tracks a size in sectors,
with the granularity scaled down accordingly, because it lets us
use a shortcut for our iterators which are currently sector-based.
But there's no reason we can't track the dirty bitmap size in bytes,
since it is (mostly) an internal-only variable (remember, the size
is how many bytes are covered by the bitmap, not how many bytes the
bitmap occupies). A later cleanup will convert dirty bitmap
internals to be entirely byte-based, eliminating the intermediate
sector rounding added here; and technically, since bdrv_getlength()
already rounds up to sectors, our use of DIV_ROUND_UP is more for
theoretical completeness than for any actual rounding.
Use is_power_of_2() while at it, instead of open-coding that.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We're already reporting bytes for bdrv_dirty_bitmap_granularity();
mixing bytes and sectors in our return values is a recipe for
confusion. A later cleanup will convert dirty bitmap internals
to be entirely byte-based, but in the meantime, we should report
the bitmap size in bytes.
The only external caller in qcow2-bitmap.c is temporarily more verbose
(because it is still using sector-based math), but will later be
switched to track progress by bytes instead of sectors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We've previously fixed several places where we failed to account
for possible errors from bdrv_nb_sectors(). Fix another one by
making bdrv_dirty_bitmap_truncate() take the new size from the
caller instead of querying itself; then adjust the sole caller
bdrv_truncate() to pass the size just determined by a successful
resize, or to reuse the size given to the original truncate
operation when refresh_total_sectors() was not able to confirm the
actual size (the two sizes can potentially differ according to
rounding constraints), thus avoiding sizing the bitmaps to -1.
This also fixes a bug where not all failure paths in
bdrv_truncate() would set errp.
Note that bdrv_truncate() is still a bit awkward. We may want
to revisit it later and clean up things to better guarantee that
a resize attempt either fails cleanly up front, or cannot fail
after guest-visible changes have been made (if temporary changes
are made, then they need to be cleanly rolled back). But that
is a task for another day; for now, the goal is the bare minimum
fix to ensure that just bdrv_dirty_bitmap_truncate() cannot fail.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We had several functions that no one is currently using, and which
use sector-based interfaces. I'm trying to convert towards byte-based
interfaces, so it's easier to just drop the unused functions:
bdrv_dirty_bitmap_get_meta
bdrv_dirty_bitmap_get_meta_locked
bdrv_dirty_bitmap_reset_meta
bdrv_dirty_bitmap_meta_granularity
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The only client of hbitmap_serialization_granularity() is dirty-bitmap's
bdrv_dirty_bitmap_serialization_align(). Keeping the two names consistent
is worthwhile, and the shorter name is more representative of what the
function returns (the required alignment to be used for start/count of
other serialization functions, where violating the alignment causes
assertion failures).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We've been documenting the value in bytes since its introduction
in commit b9a9b3a4 (v1.3), where it was actually reported in bytes.
Commit e4654d2 (v2.0) then removed things from block/qapi.c, in
preparation for a rewrite to a list of dirty sectors in the next
commit 21b5683 in block.c, but the new code mistakenly started
reporting in sectors.
Fixes: https://bugzilla.redhat.com/1441460
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We should release them here to reload on invalidate cache.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-31-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Interface for removing persistent bitmap from its storage.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-28-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-19-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
New field BdrvDirtyBitmap.persistent means, that bitmap should be saved
by format driver in .bdrv_close and .bdrv_inactivate. No format driver
supports it for now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170628120530.31251-18-vsementsov@virtuozzo.com
[mreitz: Fixed indentation]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Mirror AUTO flag from Qcow2 bitmap in BdrvDirtyBitmap. This will be
needed in future, to save this flag back to Qcow2 for persistent
bitmaps.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170628120530.31251-16-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
It will be needed in following commits for persistent bitmaps.
If bitmap is loaded from read-only storage (and we can't mark it
"in use" in this storage) corresponding BdrvDirtyBitmap should be
read-only.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170628120530.31251-11-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-10-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add bdrv_dirty_bitmap_deserialize_ones() function, which is needed for
qcow2 bitmap loading, to handle unallocated bitmap parts, marked as
all-ones.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-7-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make getter signature const-correct. This allows other functions with
const dirty bitmap parameter use bdrv_dirty_bitmap_granularity().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628120530.31251-6-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
It protects only the list of dirty bitmaps; in the next patch we will
also protect their content.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-15-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Callers can create an iterator of meta bitmap with
bdrv_dirty_meta_iter_new(), then use the bdrv_dirty_iter_* operations on
it. Meta iterators are also counted by bitmap->active_iterators.
Also add a couple of functions to retrieve granularity and count.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1476395910-8697-11-git-send-email-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Several functions to provide necessary access to BdrvDirtyBitmap for
block-migration.c
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[Add the "finish" parameters. - Fam]
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1476395910-8697-9-git-send-email-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We use a loop over bs->dirty_bitmaps to make sure the caller is
only releasing a bitmap owned by bs. Let's also assert that in this case
the caller is releasing a bitmap that does exist.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1476395910-8697-7-git-send-email-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
