Modernizes the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220603185045.143789-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
PCI interrupt wiring and device creation were performed in create()
functions which are obsolete. Move these tasks into QOM functions to
modernize the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220603185045.143789-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The pci_map_irq_fn was implemented below type_init() which made it
inaccessible to QOM functions. So move it up.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220603185045.143789-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220603185045.143789-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
TYPE_PIIX3_PCI_DEVICE resides there as already, so add the remaining
ones, too.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220603185045.143789-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This function is now unused and so can be completely removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-13-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now that all external logic has been removed from piix4_pm_initfn() the PIIX4_PM
device can be instantiated directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-12-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now that all external logic has been removed from piix4_pm_initfn() the PIIX4_PM
device can be instantiated directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-11-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Initialize the SMI IRQ in piix4_pm_init().
The smi_irq can now be wired up directly using a qdev gpio instead
of having to set the IRQ externally in piix4_pm_initfn().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-10-mark.cave-ayland@ilande.co.uk>
[PMD: Partially squash 20220528091934.15520-8-mark.cave-ayland@ilande.co.uk]
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Introduce piix4_pm_init() instance init function and use it to
initialise the separate qdev gpio for the SCI IRQ.
The sci_irq can now be wired up directly using a qdev gpio instead
of having to set the IRQ externally in piix4_pm_initfn().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-9-mark.cave-ayland@ilande.co.uk>
[PMD: Partially squash 20220528091934.15520-8-mark.cave-ayland@ilande.co.uk]
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When QOMifying a device it is typical to use _init() as the suffix for an
instance_init function, however this name is already in use by the legacy
piix4_pm_init() wrapper function. Eventually the wrapper function will be
removed, but for now rename it to piix4_pm_initfn() to avoid a naming
collision.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-7-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This exposes the PIIX4_PM device to the caller to allow any qdev gpios to be
mapped outside of piix4_pm_init().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-6-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This allows the QOM types in hw/acpi/piix4.c to be used elsewhere by simply including
hw/acpi/piix4.h.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-5-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This allows the smm_enabled value to be set using a standard qdev property instead
of being referenced directly in piix4_pm_init().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220528091934.15520-4-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This is in preparation for conversion to a qdev property.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220528091934.15520-3-mark.cave-ayland@ilande.co.uk>
[PMD: Change simm_enabled from int to bool, suggested by Ani Sinha]
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This logic can be included as part of piix4_pm_realize() and does not need to
be handled externally.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220528091934.15520-2-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The sysbus floppy controllers (devices sysbus-fdc and sun-fdtwo)
don't support DMA. The core floppy controller code expects this to
be indicated by setting FDCtrl::dma_chann to -1. This used to be
done in the device instance_init functions sysbus_fdc_initfn() and
sun4m_fdc_initfn(), but in commit 1430759ec3 we refactored this code
and accidentally lost the setting of dma_chann.
For sysbus-fdc this has no ill effects because we were redundantly
also setting dma_chann in fdctrl_init_sysbus(), but for sun-fdtwo
this means that guests which try to enable DMA on the floppy
controller will cause QEMU to crash because FDCtrl::dma is NULL.
Set dma_chann to -1 in the common instance init, and remove the
redundant code in fdctrl_init_sysbus() that is also setting it.
There is a six-year-old FIXME comment in the jazz board code to the
effect that in theory it should support doing DMA via a custom DMA
controller. If anybody ever chooses to fix that they can do it by
adding support for setting both FDCtrl::dma_chann and FDCtrl::dma.
(A QOM link property 'dma-controller' on the sysbus device which can
be set to an instance of IsaDmaClass is probably the way to go.)
Fixes: 1430759ec3 ("hw/block/fdc: Extract SysBus floppy controllers to fdc-sysbus.c")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/958
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220505101842.2757905-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
nanoMIPS ISA support in QEMU is actively used by MediaTek and is
planned to be maintained and potentially extended by MediaTek in
future.
Un-orphan nanoMIPS ISA support in QEMU by setting a maintainer from
MediaTek and remove deprecation notes from documentation as well.
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Message-Id: <20220504110403.613168-8-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Switch statements for the code segments that handle nanoMIPS
instruction pools P.LL, P.SC, P.SHIFT, P.LS.S1, P.LS.E0, PP.LSXS
do not have proper default case, resulting in not generating
reserved instruction exception for certain illegal opcodes.
Fix this by adding default cases for these switch statements that
trigger reserved instruction exception.
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-7-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
nanoMIPS ISA does not support unaligned memory access. Adjust
DisasContext's default_tcg_memop_mask to reflect this.
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-6-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
If both rs and rt are the same register, the nanoMIPS instruction
BNEC[32] rs, rt, address is equivalent to NOP (branch is not taken and
there is no delay slot). This commit provides such behavior. Without
this commit, this scenario results in an incorrect behavior.
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-5-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There are currently two problems related to the emulation of the
instruction BPOSGE32C.
The nanoMIPS instruction BPOSGE32C belongs to DSP R3 instructions
(actually, as of now, it is the only instruction of DSP R3). The
presence of DSP R3 instructions in QEMU is indicated by the flag
MIPS_HFLAG_DSP_R3 (0x20000000). This flag is currently being properly
set in CPUMIPSState's hflags (for example, for I7200 nanoMIPS CPU).
However, it is not propagated to DisasContext's hflags, since the flag
MIPS_HFLAG_DSP_R3 is not set in MIPS_HFLAG_TMASK (while similar flags
MIPS_HFLAG_DSP_R2 and MIPS_HFLAG_DSP are set in this mask, and there
is no problem in functioning check_dsp_r2(), check_dsp()). This means
the function check_dsp_r3() currently does not work properly, and the
emulation of BPOSGE32C can not work properly as well.
Change MIPS_HFLAG_TMASK from 0x1F5807FF to 0x3F5807FF (logical OR
with 0x20000000) to fix this.
Additionally, check_cp1_enabled() is currently incorrectly called
while emulating BPOSGE32C. BPOSGE32C is in the same pool (P.BR1) as
FPU branch instruction BC1EQZC and BC1NEZC, but it not a part of FPU
(CP1) instructions, and check_cp1_enabled() should not be involved
while emulating BPOSGE32C.
Rearrange invocations of check_cp1_enabled() within P.BR1 pool
handling to affect only BC1EQZC and BC1NEZC emulation, and not
BPOSGE32C emulation.
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-4-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The field rs in the instruction EXTRV_S.H rt, ac, rs is specified in
nanoMIPS documentation as opcode[20..16]. It is, however, erroneously
considered as opcode[25..21] in the current QEMU implementation. In
function gen_pool32axf_2_nanomips_insn(), the variable v0_t corresponds
to rt/opcode[25..21], and v1_t corresponds to rs/opcode[20..16]), and
v0_t is by mistake passed to the helper gen_helper_extr_s_h().
Use v1_t rather than v0_t in the invocation of gen_helper_extr_s_h()
to fix this.
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Fixes: 8b3698b294 ("target/mips: Add emulation of DSP ASE for nanoMIPS")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-3-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The field ac in nanoMIPS instruction MTHLIP rs, ac is specified in
nanoMIPS documentation as opcode[15..14] (2 bits). However, in the
current QEMU code, the corresponding argument passed to the helper
gen_helper_mthlip() has the value of opcode[15..11] (5 bits). Right
shift the value of this argument by three bits to fix this.
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-2-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fix the FTRUNC_S and FTRUNC_U trans helper problem.
Fixes: 5c5b64000c ("target/mips: Convert MSA 2RF instruction format to decodetree")
Signed-off-by: nihui <shuizhuyuanluo@126.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220503144241.289239-1-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This patch fix the issue that helper_msa_st_b() write high 64bit
data to where the low 64bit resides, leaving high 64bit undefined.
Fixes: 68ad9260e0 ("target/mips: Use 8-byte memory ops for msa load/store")
Signed-off-by: Ni Hui <shuizhuyuanluo@126.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504023319.12923-1-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Only for msa COPY_U/COPY_S with wd zero, we treat it as NOP.
Move this special rule into COPY_U and COPY_S trans function.
Fixes: 97fe675519 ("target/mips: Convert MSA COPY_S and INSERT opcodes to decodetree")
Signed-off-by: Ni Hui <shuizhuyuanluo@126.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220503130708.272850-4-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fix issue that condition of check_msa_enabled(ctx) is reversed
that causes segfault when msa elm_fn op encountered.
Fixes: 2f2745c81a ("target/mips: Convert MSA COPY_U opcode to decodetree")
Fixes: 97fe675519 ("target/mips: Convert MSA COPY_S and INSERT opcodes to decodetree")
Signed-off-by: Ni Hui <shuizhuyuanluo@126.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220503130708.272850-3-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Actually look into dfe structure data so that df_extract_val() and
df_extract_df() can return immediate and datafield other than BYTE.
Fixes: 4701d23aef ("target/mips: Convert MSA BIT instruction format to decodetree")
Signed-off-by: Ni Hui <shuizhuyuanluo@126.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220503130708.272850-2-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fix the SAT_S and SAT_U trans helper confusion.
Fixes: 4701d23aef ("target/mips: Convert MSA BIT instruction format to decodetree")
Signed-off-by: Ni Hui <shuizhuyuanluo@126.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220503130708.272850-1-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
bit 31 (M) of WatchHiN register is a read-only register indicating
whether the next WatchHi register is present. It must not be reset
during user writes to the register.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@fungible.com>
Reviewed-by: David Daney <david.daney@fungible.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@fungible.com>
Message-Id: <20220511212953.74738-1-philmd@fungible.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
more CXL patches
VIOT
Igor's huge AML rework
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKj4YcPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpkNcIAKTsMfUVueTjelC2RwIdegQkypycKhCweKzc
QxddaEr0w+N2164byT3IUy9h53hV3qAAmMuGE4d8B2r5rykf+SwDfIeNmHNqntnA
oLraXIxSSAf4/1cTsRCVL/BXo2E9P+WHI3huw37HClmPLdyMjQa1AtpTpKnIsbmO
sBZf7t5yHDJ2WGZwBQ1IbAxvsdGo1fa1TCt1jZ9g1dmnQSTteQG8DHkGoRnkwTi7
510jb0e8uQEgKytCdLTHqESHlfgjvoI73OFOAR2dzTKy6KelFmdLYSo2FtsIdtT5
1fZNaDjtl6zQ4b2iLBgPpHtikKch9BzzhDMbCsq7FpvasZ8u2FE=
=LXG0
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes,cleanups,features
more CXL patches
VIOT
Igor's huge AML rework
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKj4YcPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpkNcIAKTsMfUVueTjelC2RwIdegQkypycKhCweKzc
# QxddaEr0w+N2164byT3IUy9h53hV3qAAmMuGE4d8B2r5rykf+SwDfIeNmHNqntnA
# oLraXIxSSAf4/1cTsRCVL/BXo2E9P+WHI3huw37HClmPLdyMjQa1AtpTpKnIsbmO
# sBZf7t5yHDJ2WGZwBQ1IbAxvsdGo1fa1TCt1jZ9g1dmnQSTteQG8DHkGoRnkwTi7
# 510jb0e8uQEgKytCdLTHqESHlfgjvoI73OFOAR2dzTKy6KelFmdLYSo2FtsIdtT5
# 1fZNaDjtl6zQ4b2iLBgPpHtikKch9BzzhDMbCsq7FpvasZ8u2FE=
# =LXG0
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 10 Jun 2022 05:27:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
hw/vhost-user-scsi|blk: set `supports_config` flag correctly
hw/virtio/vhost-user: don't use uninitialized variable
tests/acpi: virt: update golden masters for VIOT
hw/acpi/viot: sort VIOT ACPI table entries by PCI host bridge min_bus
tests/acpi: virt: allow VIOT acpi table changes
hw/acpi/viot: build array of PCI host bridges before generating VIOT ACPI table
hw/acpi/viot: move the individual PCI host bridge entry generation to a new function
hw/acpi/viot: rename build_pci_range_node() to enumerate_pci_host_bridges()
hw/cxl: Fix missing write mask for HDM decoder target list registers
pci: fix overflow in snprintf string formatting
hw/machine: Drop cxl_supported flag as no longer useful
hw/cxl: Move the CXLState from MachineState to machine type specific state.
tests/acpi: Update q35/CEDT.cxl for new memory addresses.
pci/pci_expander_bridge: For CXL HB delay the HB register memory region setup.
tests/acpi: Allow modification of q35 CXL CEDT table.
hw/cxl: Push linking of CXL targets into i386/pc rather than in machine.c
hw/acpi/cxl: Pass in the CXLState directly rather than MachineState
hw/cxl: Make the CXL fixed memory window setup a machine parameter.
x86: acpi-build: do not include hw/isa/isa.h directly
tests: acpi: update expected DSDT.tis.tpm2/DSDT.tis.tpm12 blobs
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently we mishandle the --semihosting-config option if the
user specifies it on the command line more than once. For
example with:
--semihosting-config target=gdb --semihosting-config arg=foo,arg=bar
the function qemu_semihosting_config_options() is called twice, once
for each argument. But that function expects to be called only once,
and it always unconditionally sets the semihosting.enabled,
semihost_chardev and semihosting.target variables. This means that
if any of those options were set anywhere except the last
--semihosting-config option on the command line, those settings are
ignored. In the example above, 'target=gdb' in the first option is
overridden by an implied default 'target=auto' in the second.
The QemuOptsList machinery has a flag for handling this kind of
"option group is setting global state": by setting
.merge_lists = true;
we make the machinery merge all the --semihosting-config arguments
the user passes into a single set of options and call our
qemu_semihosting_config_options() just once.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220526190053.521505-3-peter.maydell@linaro.org
In two places in gdbstub.c we look at gdbserver_state.init to decide
whether we're going to do a semihosting syscall via the gdb remote
protocol:
* when setting up, if the user didn't explicitly select either
native semihosting or gdb semihosting, we autoselect, with the
intended behaviour "use gdb if gdb is connected"
* when the semihosting layer attempts to do a syscall via gdb, we
silently ignore it if the gdbstub wasn't actually set up
However, if the user's commandline sets up the gdbstub but tells QEMU
to start rather than waiting for a GDB to connect (eg using '-s' but
not '-S'), then we will have gdbserver_state.init true but no actual
connection; an attempt to use gdb syscalls will then crash because we
try to use gdbserver_state.c_cpu when it hasn't been set up:
#0 0x00007ffff6803ba8 in qemu_cpu_kick (cpu=0x0) at ../../softmmu/cpus.c:457
#1 0x00007ffff6c03913 in gdb_do_syscallv (cb=0x7ffff6c19944 <common_semi_cb>,
fmt=0x7ffff7573b7e "", va=0x7ffff56294c0) at ../../gdbstub.c:2946
#2 0x00007ffff6c19c3a in common_semi_gdb_syscall (cs=0x7ffff83fe060,
cb=0x7ffff6c19944 <common_semi_cb>, fmt=0x7ffff7573b75 "isatty,%x")
at ../../semihosting/arm-compat-semi.c:494
#3 0x00007ffff6c1a064 in gdb_isattyfn (cs=0x7ffff83fe060, gf=0x7ffff86a3690)
at ../../semihosting/arm-compat-semi.c:636
#4 0x00007ffff6c1b20f in do_common_semihosting (cs=0x7ffff83fe060)
at ../../semihosting/arm-compat-semi.c:967
#5 0x00007ffff693a037 in handle_semihosting (cs=0x7ffff83fe060)
at ../../target/arm/helper.c:10316
You can probably also get into this state via some odd
corner cases involving connecting a GDB and then telling it
to detach from all the vCPUs.
Abstract out the test into a new gdb_attached() function
which returns true only if there's actually a GDB connected
to the debug stub and attached to at least one vCPU.
Reported-by: Liviu Ionescu <ilg@livius.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220526190053.521505-2-peter.maydell@linaro.org
Since DDI0487F.a, the RW bit is RAO/WI. When specifically
targeting such a cpu, e.g. cortex-a76, it is legitimate to
ignore the bit within the secure monitor.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1062
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609214657.1217913-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because reset always initializes the AA64 version, SCR_EL3,
test the mode of EL3 instead of the type of the cpreg.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609214657.1217913-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Creating 1GB image for a simple qtest is unnecessary
and could lead to failures. We reduce the image size
to 1MB to reduce the test overhead.
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20220609214125.4192212-1-wuhaotsh@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were using arm_is_secure and is_a64, which are
tests against the current EL, as opposed to
arm_el_is_aa64 and arm_is_secure_below_el3, which
can be applied to a different EL than current.
Consolidate the two tests.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is no longer used outside debug_helper.c.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Handle the debug vs current el exception test in one place.
Leave EXCP_BKPT alone, since that treats debug < current differently.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is no longer used. At the same time, remove
DisasContext.secure_routed_to_el3, as it in turn becomes unused.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the helper we can use exception_target_el at runtime,
instead of default_exception_el at translate time.
While we're at it, remove the DisasContext parameter from
gen_exception, as it is no longer used.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split out a common helper function for gen_exception_el
and gen_exception_insn_el_v.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a new wrapper function that passes the default
exception target to gen_exception_el.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is not required by any other translation file.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We no longer need this value during translation,
as it is now handled within the helpers.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the computation from gen_swstep_exception into a helper.
This fixes a bug when:
- MDSCR_EL1.KDE == 1 to enable debug exceptions within EL_D itself
- we singlestep an ERET from EL_D to some lower EL
Previously we were computing 'same el' based on the EL which
executed the ERET instruction, whereas it ought to be computed
based on the EL to which ERET returned. This happens naturally
with the new helper, which runs after EL has been changed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a new wrapper function that passes the default
exception target to gen_exception_insn_el.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220609202901.1177572-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
