Rocker is a simulated ethernet switch device. The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs. The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.
Rocker device is invoked with -device, for example a 4-port switch:
-device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
ports[2]=dev2,ports[3]=dev3
Each port is a netdev and can be paired with using -netdev id=<port name>.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com
rocker: fix clang compiler errors
Consolidate all forward typedef declarations to rocker.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
rocker: add support for flow modification
We had support for flow add/del. This adds support for flow mod. I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:
ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2
The first cmd adds the route. The second cmd changes the existing route by
changing its nexthop info.
In the device, a mod operation results in the matching flow enty being modified
with the new settings. This is atomic to the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rocker is an ethernet switch device, so add 'other' network device class as
defined by PCI to cover these types of devices.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Message-id: 1426306173-24884-6-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is the register programming guide for the Rocker device. It's intended
for driver writers and device writers. It covers the device's PCI space,
the register set, DMA interface, and interrupts.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Message-id: 1426306173-24884-4-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1426306173-24884-3-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We can use this in virtio-net code as well as new Rocker driver code, so
up-level this.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1426306173-24884-2-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a verbose flag that shows the QMP command that was
constructed, to allow for later copy/pasting, reference,
debugging, etc.
The QMP is converted from a Python literal to JSON first,
to ensure that it is viable input to the actual QMP parser.
As a side-effect, this JSON output will helpfully show all
the necessary conversions that were performed on the input,
illustrating that "True" was transformed back into "true",
literal values are now escaped with "" instead of '', and so on.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Add a special processing mode to craft transactions.
By entering "transaction(" the shell will enter a special
mode where each subsequent command will be saved as a transaction
instead of executed as an individual command.
The transaction can be submitted by entering ")" on a line by itself.
Examples:
Separate lines:
(QEMU) transaction(
TRANS> block-dirty-bitmap-add node=drive0 name=bitmap1
TRANS> block-dirty-bitmap-clear node=drive0 name=bitmap0
TRANS> )
With a transaction action included on the first line:
(QEMU) transaction( block-dirty-bitmap-add node=drive0 name=bitmap2
TRANS> block-dirty-bitmap-add node=drive0 name=bitmap3
TRANS> )
As a one-liner, with just one transaction action:
(QEMU) transaction( block-dirty-bitmap-add node=drive0 name=bitmap0 )
As a side-effect of this patch, blank lines are now parsed as no-ops,
regardless of which shell mode you are in.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This includes support for [] expressions, single-quotes in
QMP expressions (which is not strictly a part of JSON), and
the ability to use "True", "False" and "None" literals instead
of JSON's equivalent true, false, and null literals.
qmp-shell currently allows you to describe values as
JSON expressions:
key={"key":{"key2":"val"}}
But it does not currently support arrays, which are needed
for serializing and deserializing transactions:
key=[{"type":"drive-backup","data":{...}}]
qmp-shell also only currently accepts doubly quoted strings
as-per JSON spec, but QMP allows single quotes.
Lastly, python allows you to utilize "True" or "False" as
boolean literals, but JSON expects "true" or "false". Expand
qmp-shell to allow the user to type either, converting to the
correct type.
As a consequence of the above, the key=val parsing is also improved
to give better error messages if a key=val token is not provided.
CAVEAT: The parser is still extremely rudimentary and does not
expect to find spaces in {} nor [] expressions. This patch does
not improve this functionality.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Refactor the qmp-shell command line processing function
into two components. This will be used to allow sub-expressions,
which will assist us in adding transactional support to qmp-shell.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Markus is taking over maintership of QMP and the QAPI from
me. Markus has always been a great reviewer and contributor
to those subsystems. In the last few months he's also doing
pull requests that are a lot more relevant than the ones I
was able to do. So, this is a natural move.
I'm still the maintainer of HMP and QObjects, but I'm
looking for someone to take over those too.
PS: This commit also fixes the file listing for the QMP
entry.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We document that in QMP, the client may send any json-value
for the optional "id" key, and then return that same value
on reply (both success and failures, insofar as the failure
happened after parsing the id). [Note that the output may
not be identical to the input, as whitespace may change and
since we may reorder keys within a json-object, but that this
still constitutes the same json-value]. However, we were not
handling the JSON literal null, which counts as a json-value
per RFC 7159.
Also, down the road, given the QAPI schema of {'*foo':'str'} or
{'*foo':'ComplexType'}, we could decide to allow the QMP client
to pass { "foo":null } instead of the current representation of
{ } where omitting the key is the only way to get at the default
NULL value. Such a change might be useful for argument
introspection (if a type in older qemu lacks 'foo' altogether,
then an explicit "foo":null probe will force an easily
distinguished error message for whether the optional "foo" key
is even understood in newer qemu). And if we add default values
to optional arguments, allowing an explicit null would be
required for getting a NULL value associated with an optional
string that has a non-null default. But all that can come at a
later day.
The 'check-unit' testsuite is enhanced to test that parsing
produces the same object as explicitly requesting a reference
to the special qnull object. In addition, I tested with:
$ ./x86_64-softmmu/qemu-system-x86_64 -qmp stdio -nodefaults
{"QMP": {"version": {"qemu": {"micro": 91, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}}
{"execute":"qmp_capabilities","id":null}
{"return": {}, "id": null}
{"id":{"a":null,"b":[1,null]},"execute":"quit"}
{"return": {}, "id": {"a": null, "b": [1, null]}}
{"timestamp": {"seconds": 1427742379, "microseconds": 423128}, "event": "SHUTDOWN"}
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
I'm going to fix the JSON parser to recognize null. The obvious
representation of JSON null as (QObject *)NULL doesn't work, because
the parser already uses it as an error value. Perhaps we should
change it to free NULL for null, but that's more than I can do right
now. Create a special null QObject instead.
The existing QDict, QList, and QString all represent something that
is a pointer in C and could therefore be associated with NULL. But
right now, all three of these sub-types are always non-null once
created, so the new null sentinel object is intentionally unrelated
to them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
QTYPE_NONE is a sentinel value. No QObject has this type code.
Document it properly.
Fix dump_qobject() to abort() on QTYPE_NONE, just like for any other
invalid type code.
Fix to_json() to abort() on all invalid type codes, not just
QTYPE_MAX.
Clean up Property member qtype's type: it's a qtype_code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The QJSON code used casts to (QJSON*) directly, instead of OBJECT_CHECK.
There were even some functions using object_dynamic_cast() calls
followed by assert(), which is exactly what OBJECT_CHECK does (by
calling object_dynamic_cast_assert()).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The lower part of the combined offset was sign extended and could lead to
wrong results.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
- two improvements to "info mtere" from Gerd
- KVM support for memory transaction attributes
- one more small step towards unlocked MMIO dispatch
- one piece of the qemu-nbd errno fixes
- trivial-ish patches from Denis and Thomas
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVTLBhAAoJEL/70l94x66DkGIH/jlNJBMBGhlH/lwb1LzxtAMX
OxyDxsiwJpSxsOiZiY3oRz7d6VV6TCrmx5L+1HgG5IzU3WC61Tq6/FK4EXLepZIH
GSYlLtAALWny+2Uwsyh1Z7MMr5yxyhgeORk/l7O8pncmMeysludbEaJqQg8Aa9A2
j0B2pv4tvcl/qhuIFXL1YlbYMVXMsZy5W65D8jq+B6qf3q8kUcdKvgvbUMrxAiSH
JMISo4Z32t9w8SGnhlBa9s4HfN2yOvULRAozzkDBAu4c41cZrw16lvTV8XotamnU
LrG6eQ+2PFeIrcGhuIu7z5Bi4yiRRiThfRLCAvVApVTQYUf7IwvPNa5K1FrP9YU=
=Z/UD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- build bugfix from Fam and new configure check from Emilio
- two improvements to "info mtere" from Gerd
- KVM support for memory transaction attributes
- one more small step towards unlocked MMIO dispatch
- one piece of the qemu-nbd errno fixes
- trivial-ish patches from Denis and Thomas
# gpg: Signature made Fri May 8 13:47:29 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
qemu-nbd: only send a limited number of errno codes on the wire
rules.mak: Force CFLAGS for all objects in DSO
configure: require __thread support
exec: move rcu_read_lock/unlock to address_space_translate callers
kvm: add support for memory transaction attributes
mtree: also print disabled regions
mtree: tag & indent a bit better
apic_common: improve readability of apic_reset_common
kvm: Silence warning from valgrind
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
commit c06b2ffb02
acpi: add hardware implementation for memory hot unplug
Changed both the DSDT and the SSDT. Update the expected files
accordingly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- updates for virtio-ccw and s390-virtio, making them more similar
to virtio-pci
- improvements regarding per-vcpu interrupts and migration
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=qrI/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20150508' into staging
Assorted s390x patches:
- updates for virtio-ccw and s390-virtio, making them more similar
to virtio-pci
- improvements regarding per-vcpu interrupts and migration
# gpg: Signature made Fri May 8 09:45:09 2015 BST using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
* remotes/cohuck/tags/s390x-20150508:
s390x/kvm: migrate vcpu interrupt state
s390x: move fpu regs into a subsection of the vmstate
s390x/kvm: use ioctl KVM_S390_IRQ for vcpu interrupts
virtio-ccw: implement ->device_plugged
virtio-ccw: change realization sequence
s390-virtio: clear {used,avail}_event_idx on reset as well
s390-virtio: use common features
s390-virtio: Accommodate guests using virtqueues too early
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Right now, NBD includes potentially platform-specific error values in
the wire protocol.
Luckily, most common error values are more or less universal: in
particular, of all errno values <= 34 (up to ERANGE), they are all the
same on supported platforms except for 11 (which is EAGAIN on Windows and
Linux, but EDEADLK on Darwin and the *BSDs). So, in order to guarantee
some portability, only keep a handful of possible error codes and squash
everything else to EINVAL.
This patch defines a limited set of errno values that are valid for the
NBD protocol, and specifies recommendations for what error to return
in specific corner cases. The set of errno values is roughly based on
the errors listed in the read(2) and write(2) man pages, with some
exceptions:
- ENOMEM is added for servers that implement copy-on-write or other
formats that require dynamic allocation.
- EDQUOT is not part of the universal set of errors; it can be changed
to ENOSPC on the wire format.
- EFBIG is part of the universal set of errors, but it is also changed
to ENOSPC because it is pretty similar to ENOSPC or EDQUOT.
Incoming values will in general match system errno values, but not
on the Hurd which has different errno values (they have a "subsystem
code" equal to 0x10 in bits 24-31). The Hurd is probably not something
to which QEMU has been ported, but still do the right thing and
reverse-map the NBD errno values to the system errno values.
The corresponding patch to the NBD protocol description can be found at
http://article.gmane.org/gmane.linux.drivers.nbd.general/3154.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because of the trick of process-archive-undefs, all .mo objects, even
with --enable-modules, are dependencies of executables.
This breaks CFLAGS propogation because the compiling of module object
will happen too early before building for DSO.
With GCC 5, the linking would fail because .o doesn't have -fPIC. Also,
BUILD_DSO will be missed. (module-common.o will have it, so the stamp
symbol was still liked in .so).
Fix the problem by forcing the CFLAGS on individual .o-cflags during
unnest-vars.
Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Fam Zheng <famz@redhat.com>
Cc: qemu-stable@nongnu.org # 2.3
Message-Id: <1430981715-31465-1-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Label the "size" and "offset" fields in BLOCK_IMAGE_CORRUPTED as
optional, and clarify that the latter refers to the host's offset into
the image.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
include/glib-compat.h defines a bunch of functions based on glib primitives,
and uses assert() without including assert.h. Replace assert() with
g_assert() to make the file more self-contained, and to fix compilation
breakage after 28507a415a.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
The functions tpm_backend_thread_tpm_reset() and iothread_find()
are completely unused, let's remove them.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Value from xfer->packet.ep is assigned to ep here, but that
stored value is not used before it is overwritten. Remove it.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
... and the status register should say so.
Fixes "usbus0: controller did not stop" error printed by freebsd.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When x-root property not be configured, will cause segfault
because of null pointer accessing. Add a check for s->root
property avoid segfault.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When we find a IOC bit set on a setup trb and therefore queue an event,
that should not stop events being generated for following data trbs.
So clear the 'reported' flag.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This makes xhci generate multiple short packet events in case of
multi-trb transfers. Which is wrong. We need to fix this in a
different way.
This reverts commit aa6857891d.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
