Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Drop the old SysBus init function and use instance_init
* Split the exynos4210_irq_gate_init into an instance_init
and a DeviceClass::realize function
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
surface_bits_per_pixel() always returns 32
so, removing other dead code which is
based on DEPTH !== 32
Signed-off-by: Pooja Dhannawat <dhannawatpooja1@gmail.com>
Message-id: 1459260142-9144-1-git-send-email-dhannawatpooja1@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Removing support for DEPTH != 32 from blizzard template header
and file that includes it, as macro DEPTH == 32 only used.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Pooja Dhannawat <dhannawatpooja1@gmail.com>
Message-id: 1458971873-2768-1-git-send-email-dhannawatpooja1@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Call vbe_update_vgaregs() when the guest touches GFX, SEQ or CRT
registers, to make sure the vga registers will always have the
values needed by vbe mode. This makes sure the sanity checks
applied by vbe_fixup_regs() are effective.
Without this guests can muck with shift_control, can turn on planar
vga modes or text mode emulation while VBE is active, making qemu
take code paths meant for CGA compatibility, but with the very
large display widths and heigts settable using VBE registers.
Which is good for one or another buffer overflow. Not that
critical as they typically read overflows happening somewhere
in the display code. So guests can DoS by crashing qemu with a
segfault, but it is probably not possible to break out of the VM.
Fixes: CVE-2016-3712
Reported-by: Zuozhi Fzz <zuozhi.fzz@alibaba-inc.com>
Reported-by: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Call the new vbe_update_vgaregs() function on vbe configuration
changes, to make sure vga registers are up-to-date.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When enabling vbe mode qemu will setup a bunch of vga registers to make
sure the vga emulation operates in correct mode for a linear
framebuffer. Move that code to a separate function so we can call it
from other places too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vga allows banked access to video memory using the window at 0xa00000
and it supports a different access modes with different address
calculations.
The VBE bochs extentions support banked access too, using the
VBE_DISPI_INDEX_BANK register. The code tries to take the different
address calculations into account and applies different limits to
VBE_DISPI_INDEX_BANK depending on the current access mode.
Which is probably effective in stopping misprogramming by accident.
But from a security point of view completely useless as an attacker
can easily change access modes after setting the bank register.
Drop the bogus check, add range checks to vga_mem_{readb,writeb}
instead.
Fixes: CVE-2016-3710
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
'make check' fails with:
ERROR:tests/bios-tables-test.c:493:load_expected_aml:
assertion failed: (g_file_test(aml_file, G_FILE_TEST_EXISTS))
since commit:
caf50c7166
tests: pc: acpi: drop not needed 'expected SSDT' blobs
Assert happens because qemu-system-x86_64 generates
SSDT table and test looks for a corresponding expected
table to compare with.
However there is no expected SSDT blob anymore, since
QEMU souldn't generate one. As it happens BIOS is not
able to read ACPI tables from QEMU and fallbacks to
embeded legacy ACPI codepath, which generates SSDT.
That happens due to wrongly sized endiannes conversion
which makes
uint8_t BiosLinkerLoaderEntry.alloc.zone
end up with 0 due to truncation of 32 bit integer
which on host is 1 or 2.
Fix it by dropping invalid cpu_to_le32() as uint8_t
doesn't require any conversion.
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1330174
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
CPU/memory resources can be signalled en-masse via
spapr_hotplug_req_add_by_count(), and when doing so, actually change
the meaning of the 'drc' parameter passed to
spapr_hotplug_req_event() to be a count rather than an index.
f40eb92 added a hook in spapr_hotplug_req_event() to record when a
device had been 'signalled' to the guest, but that code assumes that
drc is always an index. In cases where it's a count, such as memory
hotplug, the DRC lookup will fail, leading to an assert.
Fix this by only explicitly setting the signalled state for cases where
we are doing PCI hotplug.
For other resources types, since we cannot selectively track whether a
resource has been signalled in cases where we signal attach as a count,
set the 'signalled' state to true immediately upon making the
resource available via drck->attach().
Reported-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: david@gibson.dropbear.id.au
Cc: qemu-ppc@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
commit "5f77e06 usb: add pid check at the first of uhci_handle_td()"
moved the pid verification to the start of the uhci_handle_td function,
to simplify the error handling (we don't have to free stuff which we
didn't allocate in the first place ...).
Problem is now the check fires too often, it raises error IRQs even for
TDs which we are not going to process because they are not set active.
So, lets move down the check a bit, so it is done only for active TDs,
but still before we are going to allocate stuff to process the requested
transfer.
Reported-by: Joe Clifford <joe@thunderbug.co.uk>
Tested-by: Joe Clifford <joe@thunderbug.co.uk>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1461321893-15811-1-git-send-email-kraxel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU currently crashes when using bad parameters for the
spapr-pci-host-bridge device:
$ qemu-system-ppc64 -device spapr-pci-host-bridge,buid=0x123,liobn=0x321,mem_win_addr=0x1,io_win_addr=0x10
Segmentation fault
The problem is that spapr_tce_find_by_liobn() might return NULL, but
the code in spapr_populate_pci_dt() does not check for this condition
and then tries to dereference this NULL pointer.
Apart from that, the return value of spapr_populate_pci_dt() also
has to be checked for all PCI buses, not only for the last one, to
make sure we catch all errors.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The effect of this change is the block layer drained section can work,
for example when mirror job is being completed.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All callers pass "false" keeping the old semantics. The windows
implementation doesn't distinguish the flag yet. On posix, it is passed
down to the underlying aio context.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 32-bit ARM Linux kernel booting ABI requires that r0 is 0
when calling the kernel image. A bug in commit 10b8ec73e6
meant that for boards which use the write_board_setup hook (which
means "highbank", "midway", "raspi2" and "xilinx-zynq-a9") we
were incorrectly skipping the "clear r0" instruction in the
mini-bootloader. Use the right offset in the "add lr, pc, #n"
instruction so that we return from the board-setup code to the
correct place.
Signed-off-by: Sylvain Garrigues <sylvain@sylvaingarrigues.com>
[PMM: Expanded commit message]
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A single fix for a regression since 2.5. This should be the last ppc
pull request for 2.6.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+Eci
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.6-20160419' into staging
ppc patch queueu for 2016-04-19
A single fix for a regression since 2.5. This should be the last ppc
pull request for 2.6.
# gpg: Signature made Tue 19 Apr 2016 02:48:30 BST using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.6-20160419:
cuda: fix off-by-one error in SET_TIME command
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
cadence_uart_init() initializes an I/O memory region of size 0x1000
bytes. However in uart_write(), the 'offset' parameter (offset within
region) is divided by 4 and then used to index the array 'r' of size
CADENCE_UART_R_MAX which is much smaller: (0x48/4). If 'offset>>=2'
exceeds CADENCE_UART_R_MAX, this will cause an out-of-bounds memory
write where the offset and the value are controlled by guest.
This will corrupt QEMU memory, in most situations this causes the vm to
crash.
Fix by checking the offset against the array size.
Cc: qemu-stable@nongnu.org
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20160418100735.GA517@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit "156a2e4 ehci: make idt processing more robust" tries to avoid a
DoS by the guest (create a circular iTD queue and let qemu ehci
emulation run in circles forever). Unfortunately this has two problems:
First it misses the case of siTDs, and second it reportedly breaks
FreeBSD.
So lets go for a different approach: just count the number of iTDs and
siTDs we have seen per frame and apply a limit. That should really
catch all cases now.
Reported-by: 杜少博 <dushaobo@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With the new framework the cuda_cmd_set_time command directly receive
the data, without the command byte. Therefore the time is stored at
in_data[0], not at in_data[1].
This fixes the "hwclock --systohc" command in a guest.
Cc: Hervé Poussineau <hpoussin@reactos.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
[this fixes a regression introduced by e647317 "cuda: port SET_TIME
command to new framework"]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Pflash migration (e.g. q35 + EFI variable storage) fails
with the assert:
bdrv_co_do_pwritev: Assertion `!(bs->open_flags & 0x0800)' failed.
This avoids the problem by delaying the pflash update until after
the device loads complete.
Tested by:
Migrating Q35/EFI vm.
Changing efi variable content (with efiboot in the guest)
md5sum'ing the variable file before migration and after.
This is a fix that Paolo posted in the message
570244B3.4070105@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Minor fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXD58TAAoJECgfDbjSjVRpDCAH/iZXlMxl4j23qH4mqJa88HJq
UHqsuU6NGHXhsYUzGy9wQp7RTNnMlwF1GC+vsIlZzr1XPu/U/GwUZVPf1Ca0xZ0Q
ukRzd7nvAaHnUEC26AJul8CgoThmPf5ip4LqAqQvSUrrAsQ1viR49HHCtmFC2w33
iOg9ZznZM+Prlh8IGMCSF93ER9l4s7T2CvDPmlKtC5iXepU8J47V2EmPg3VjCd3B
jeQ6RIF0RtJQCvUxLW3FcUnM6bmIszqPEwmBkiOfJcvuNisNMZGavAyzzoXfMmQ9
YkrGEnDwLa5a3qMTptmxDvPzy4ksc7OzVIw0bcBnqnGmDJwGz44mBjYJ555zJi8=
=ufoF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
tpm, vhost, virtio: fixes for 2.6
Minor fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 14 Apr 2016 14:45:55 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
hw/virtio/balloon: Replace TARGET_PAGE_SIZE with BALLOON_PAGE_SIZE
tpm: Fix write to file descriptor function
tpm: acpi: remove IRQ from TPM's CRS to make Windows not see conflict
pc: acpi: tpm: add missing MMIO resource to PCI0._CRS
specs/vhost-user: spelling fix
specs/vhost-user: improve VHOST_SET_VRING_NUM documentation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The balloon code currently calls madvise() with TARGET_PAGE_SIZE as
length parameter. Since the virtio-balloon protocol is always based
on 4k pages, no matter what the host and guest are using as page size,
this could cause problems: If TARGET_PAGE_SIZE is bigger than 4k, the
madvise call also destroys the 4k areas after the current one - which
might be wrong since the guest did not want free that area yet (in
case the guest used as smaller MMU page size than the hard-coded
TARGET_PAGE_SIZE). So to fix this issue, introduce a proper define
called BALLOON_PAGE_SIZE (which is 4096) to use this as the size
parameter for the madvise() call instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix a bug introduced in commit 46f296c while moving send_all to the
tpm_passthrough code. Fix the name of the variable used in the loop.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
IRQ 5 used by TPM conflicts with PNP0C0F IRQs,
as result Windows fails driver initialization with reason
'device cannot find enough free resources'
But if TPM._CRS.IRQ entry is commented out, Windows
seems to initialize driver without errors as it doesn't
notice possible conflict and it seems to work
probably due to a link with IRQ 5 being unused/disabled.
So temporary comment out TPM._CRS.IRQ to 'fix'
regression in TPM, with intent to fix it correctly
later i.e.:
1. pick unused IRQ as default one for TPM
2. fetch IRQ value from device model so that user
could override default one if it conflicts with
some other device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Windows will fail initialize TMP driver with the reason:
'device cannot find enough free resources'
That happens because parent BUS doesn't describe
MMIO resources used by TPM child device.
Fix it by describing it in top-most parent bus scope PCI0.
It was 'regressed' by commit
5cb18b3d TPM2 ACPI table support
with following fixup
9e472263 acpi: add missing ssdt
which did the right thing by moving TPM to BUS
it belongs to but lacked a proper resource declaration.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO_INPUT_CFG_ABS_INFO was not implemented for pass-through input
devices. This patch follows the existing design and pre-fetches the
config for all absolute axes using EVIOCGABS at realize time.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1460558603-18331-1-git-send-email-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The reported maximum was wrong. The X and Y coordinates are 0-based
so if size is 8000 maximum must be 7FFF.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1460128893-10244-1-git-send-email-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
virtio-input is simple enough that it doesn't need to xfer any state.
Still we have to wire up savevm manually, so the generic pci and virtio
are saved correctly.
Additionally we need to do some post-load processing to figure whenever
the guest uses the device or not, so we can give input routing hints to
the qemu input layer using qemu_input_handler_{activate,deactivate}.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1459859501-16965-1-git-send-email-kraxel@redhat.com
The write path for pass-through devices, commonly used for controlling
keyboard LEDs via EV_LED, was not implemented. This commit adds the
necessary plumbing to connect the status virtio queue to the host evdev
file descriptor.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1459511146-12060-1-git-send-email-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
VIRTIO_INPUT_CFG_EV_BITS with subsel of EV_LED was always
returning an empty bitmap for pass-through input devices.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1459418028-7473-1-git-send-email-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
KEY_PAUSE is flat out missing. KEY_SYSRQ already has a keycode
assigned but it's not what I'm seeing on my system. The mapping
doesn't appear to have to be unique so both keycodes now map to
KEY_SYSRQ which is what the "Keyboard PrintScreen", HID usage ID
0x46, translates to.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1459343240-19483-1-git-send-email-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
"qemu -device ivshmem-{plain,doorbell}" will crash, because the device
doesn't check that the required argument is provided. (screwed up in
commit 5400c02)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Restart of ATAPI DMA used to be unreachable, because the request to do
so wasn't indicated in bus->error_status due to the lack of spare bits, and
ide_restart_bh() would return early doing nothing.
This patch makes use of the observation that not all bit combinations were
possible in ->error_status. In particular, IDE_RETRY_READ only made sense
together with IDE_RETRY_DMA or IDE_RETRY_PIO. This allows to re-use
IDE_RETRY_READ alone as an indicator of ATAPI DMA restart request.
To makes things more uniform, ATAPI DMA gets its own value for ->dma_cmd.
As a means against confusion, macros are added to test the state of
->error_status.
The patch fixes the restart of both in-flight and pending ATAPI DMA,
following the scheme similar to that of IDE DMA.
[Including a fixup patch:
Message-id: 1460465594-15777-1-git-send-email-pbutsykin@virtuozzo.com
--js]
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1459924806-306-4-git-send-email-den@openvz.org
Signed-off-by: John Snow <jsnow@redhat.com>
ide_atapi_dma_restart() used to just complete the DMA with an error,
under the assumption that there isn't enough information to restart it.
However, as the contents of the ->io_buffer is preserved, it looks safe to
just re-evaluate it and dispatch the ATAPI command again.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1459924806-306-3-git-send-email-den@openvz.org
Signed-off-by: John Snow <jsnow@redhat.com>
If the migration occurs after the IDE DMA has been set up but before it
has been initiated, the state gets lost upon save/restore. Specifically,
->dma_cb callback gets cleared, so, when the guest eventually starts bus
mastering, the DMA never completes, causing the guest to time out the
operation.
OTOH all the infrastructure is already in place to restart the DMA if
the migration happens while the DMA is in progress.
So reuse that infrastructure, by setting bus->error_status based on
->dma_cmd in pre_save if ->dma_cb callback is already set but DMAING is
clear. This will indicate the need for restart and make sure ->dma_cb
is restored in ide_restart_bh(); howeover since DMAING is clear the state
upon restore will be exactly "ready for DMA" as before the save.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1459924806-306-2-git-send-email-den@openvz.org
Signed-off-by: John Snow <jsnow@redhat.com>
After commit e5e7855 (blockdev: Separate BB name management), starting a
guest with PVHVM support result in this assert:
qemu-system-i386: block/block-backend.c:173: blk_delete: Assertion `!blk->name' failed.
A backtrace show that a caller is pci_piix3_xen_ide_unplug().
This patch fix it.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-id: 1460382666-29885-1-git-send-email-anthony.perard@citrix.com
Signed-off-by: John Snow <jsnow@redhat.com>
In commit ac0487e1 ("xenfb.c: avoid expensive loops when prod <=
out_cons"), ">=" was used. In fact, a full ring is a legit state.
Correct the test to use ">".
Reported-by: "Hao, Xudong" <xudong.hao@intel.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: "Hao, Xudong" <xudong.hao@intel.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
When receiving packets over Stellaris ethernet controller, it
uses receive buffer of size 2048 bytes. In case the controller
accepts large(MTU) packets, it could lead to memory corruption.
Add check to avoid it.
Reported-by: Oleksandr Bazhaniuk <oleksandr.bazhaniuk@intel.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1460095428-22698-1-git-send-email-ppandit@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Feeling a bit nervous putting the full live migration support
patch (https://patchwork.ozlabs.org/patch/606902/) in that
late in the 2.6 devel cycle as it carries some non-trivial
changes. So disable migration in case virtio-gpu is present
for now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
