Logical and physical block sizes in QEMU are limited to 32 KiB.
This appears unnecessarily tight, and we've seen bigger block sizes
handy at times.
Lift the limitation up to 2 MiB which appears to be good enough for
everybody, and matches the qcow2 cluster size limit.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528225516.1676602-9-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add getter for size32, and use it for blocksize, too.
In its human-readable branch, it reports approximate size in
human-readable units next to the exact byte value, like the getter for
64bit size does.
Adjust the expected test output accordingly.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528225516.1676602-8-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convert all size-related properties in BlockConf to 32bit. This will
accommodate bigger block sizes (in a followup patch). This also allows
to make them all accept size suffixes, either via DEFINE_PROP_BLOCKSIZE
or via DEFINE_PROP_SIZE32.
Also, since min_io_size is exposed to the guest by scsi and virtio-blk
devices as an uint16_t in units of logical blocks, introduce an
additional check in blkconf_blocksizes to prevent its silent truncation.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20200528225516.1676602-7-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It appears convenient to be able to specify physical_block_size and
logical_block_size using common size suffixes.
Teach the blocksize property setter to interpret them. Also express the
upper and lower limits in the respective units.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528225516.1676602-6-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce size32 property type which handles size suffixes (k, m, g)
just like size property, but is uint32_t rather than uint64_t. It's
going to be useful for properties that are byte sizes but are inherently
32bit, like BlkConf.opt_io_size or .discard_granularity (they are
switched to this new property type in a followup commit).
The getter for size32 is left out for a separate patch as its benefit is
less obvious, and it affects test output; for now the regular uint32
getter is used.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20200528225516.1676602-5-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make it easier (more visible) to maintain the limits on the blocksize
properties in sync with the respective description, by using macros both
in the code and in the description.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528225516.1676602-4-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We convert queued work to a QSIMPLEQ, instead of
open-coding it.
While at it, make sure that all accesses to the list are
performed while holding the list's lock.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200609200738.445-3-robert.foley@linaro.org>
Message-Id: <20200612190237.30436-6-alex.bennee@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-58-armbru@redhat.com>
All remaining conversions to qdev_realize() are for bus-less devices.
Coccinelle script:
// only correct for bus-less @dev!
@@
expression errp;
expression dev;
@@
- qdev_init_nofail(dev);
+ qdev_realize(dev, NULL, &error_fatal);
@ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@
expression errp;
expression dev;
symbol true;
@@
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize(DEVICE(dev), NULL, errp);
@ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@
expression errp;
expression dev;
symbol true;
@@
- object_property_set_bool(dev, true, "realized", errp);
+ qdev_realize(DEVICE(dev), NULL, errp);
Note that Coccinelle chokes on ARMSSE typedef vs. macro in
hw/arm/armsse.c. Worked around by temporarily renaming the macro for
the spatch run.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
So far, qdev_realize() supports only devices that plug into a bus:
argument @bus cannot be null. Extend it to support bus-less devices,
too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-55-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-52-armbru@redhat.com>
The "null @bus means main system bus" convenience feature is no longer
used. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-47-armbru@redhat.com>
Sysbus devices almost always plug into the main system bus.
qdev_create() even has a convenience feature to make that easy: a null
bus argument gets replaced by the main system bus. qdev_realize() and
qdev_realize_and_unref() do the same.
We can do better. Provide convenience wrappers around qdev_realize()
and qdev_realize_and_unref() that don't take a @bus argument. They
always pass the main system bus.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-45-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-31-armbru@redhat.com>
This is the transformation explained in the commit before previous.
Takes care of just one pattern that needs conversion. More to come in
this series.
Coccinelle script:
@ depends on !(file in "hw/arm/highbank.c")@
expression bus, type_name, dev, expr;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);
@@
expression bus, type_name, dev, expr;
identifier DOWN;
@@
- dev = DOWN(qdev_create(bus, type_name));
+ dev = DOWN(qdev_new(type_name));
... when != dev = expr
- qdev_init_nofail(DEVICE(dev));
+ qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal);
@@
expression bus, type_name, expr;
identifier dev;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);
@@
expression bus, type_name, dev, expr, errp;
symbol true;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);
@@
expression bus, type_name, expr, errp;
identifier dev;
symbol true;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);
The first rule exempts hw/arm/highbank.c, because it matches along two
control flow paths there, with different @type_name. Covered by the
next commit's manual conversions.
Missing #include "qapi/error.h" added manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-10-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-9-armbru@redhat.com>
I'm going to convert device realization to qdev_realize() with the
help of Coccinelle. Convert bus realization to qbus_realize() first,
to get it out of Coccinelle's way. Readability improves.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-7-armbru@redhat.com>
We commonly plug devices into their bus right when we create them,
like this:
dev = qdev_create(bus, type_name);
Note that @dev is a weak reference. The reference from @bus to @dev
is the only strong one.
We realize at some later time, either with
object_property_set_bool(OBJECT(dev), true, "realized", errp);
or its convenience wrapper
qdev_init_nofail(dev);
If @dev still has no QOM parent then, realizing makes the
/machine/unattached/ orphanage its QOM parent.
Note that the device returned by qdev_create() is plugged into a bus,
but doesn't have a QOM parent, yet. Until it acquires one,
unrealizing the bus will hang in bus_unparent():
while ((kid = QTAILQ_FIRST(&bus->children)) != NULL) {
DeviceState *dev = kid->child;
object_unparent(OBJECT(dev));
}
object_unparent() does nothing when its argument has no QOM parent,
and the loop spins forever.
Device state "no QOM parent, but plugged into bus" is dangerous.
Paolo suggested to delay plugging into the bus until realize. We need
to plug into the parent bus before we call the device's realize
method, in case it uses the parent bus. So the dangerous state still
exists, but only within realization, where we can manage it safely.
This commit creates infrastructure to do this:
dev = qdev_new(type_name);
...
qdev_realize_and_unref(dev, bus, errp)
Note that @dev becomes a strong reference here.
qdev_realize_and_unref() drops it. There is also plain
qdev_realize(), which doesn't drop it.
The remainder of this series will convert all users to this new
interface.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Alistair Francis <alistair@alistair23.me>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-5-armbru@redhat.com>
qbus_realize() does not actually realize. Rename it to qbus_init().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-2-armbru@redhat.com>
This would have caught some of the bugs I just fixed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200609122339.937862-25-armbru@redhat.com>
This would have caught some of the bugs I just fixed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20200609122339.937862-23-armbru@redhat.com>
Max slots negotiation for vhost-user.
Free page reporting for balloon.
Partial TPM2 ACPI support for ARM.
Support for NVDIMMs having their own proximity domains.
New vhost-user-vsock device.
Fixes, cleanups in ACPI, PCI, virtio.
New tests for TPM ACPI.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl7jjpwPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp9AEH/RH+o9fT+Jvwv1yiCF44kjrfQ9MHzT+hDo96
vd6Ynj6O49M+ObL3f9fI5ICYHAmZQFzouJ671/FcQQF/CrMot1HBnHAWAzS2YoFu
3iNOA6PmWn0fWoVAuIfmhtE0PKNJdsuyyJMbcKY5d5bSPugO3b/bIPvo8oVAIXiM
3xf0KbicB6m0z24ssZoI7KP7PSJcacDViFXUJkgCIMce68od4CDEQ8TGi6jBmAzQ
VdriGnOCJ9Wo60GC4KL4v8HKZWnq4Nz4qfwQtHdY/MUL30eFDjYcgF0AMYLHrymy
DInh/GRQMxtD0VvOxtq1BUV0tHk/qH4XyEohSyBOrIrH+ifnjds=
=hh+M
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,acpi,pci: features, fixes, cleanups, tests
Max slots negotiation for vhost-user.
Free page reporting for balloon.
Partial TPM2 ACPI support for ARM.
Support for NVDIMMs having their own proximity domains.
New vhost-user-vsock device.
Fixes, cleanups in ACPI, PCI, virtio.
New tests for TPM ACPI.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 12 Jun 2020 15:18:04 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (58 commits)
virtio-pci: fix queue_enable write
pci: Display PCI IRQ pin in "info pci"
Fix parameter type in vhost migration log path
acpi: ged: rename event memory region
acpi: fadt: add hw-reduced sleep register support
acpi: madt: skip pci override on pci-less systems.
acpi: create acpi-common.c and move madt code
acpi: make build_madt() more generic.
virtio: add vhost-user-vsock-pci device
virtio: add vhost-user-vsock base device
vhost-vsock: add vhost-vsock-common abstraction
hw/pci: Fix crash when running QEMU with "-nic model=rocker"
libvhost-user: advertise vring features
Lift max ram slots limit in libvhost-user
Support individual region unmap in libvhost-user
Support adding individual regions in libvhost-user
Support ram slot configuration in libvhost-user
Refactor out libvhost-user fault generation logic
Lift max memory slots limit imposed by vhost-user
Transmit vhost-user memory regions individually
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is VMware documented functionallity that some guests rely on.
Returns the BIOS UUID of the current virtual machine.
Note that we also introduce a new compatability flag "x-cmds-v2" to
make sure to expose new VMPort commands only to new machine-types.
This flag will also be used by the following patches that will introduce
additional VMPort commands.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200312165431.82118-10-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As can be seen from VmCheck_GetVersion() in open-vm-tools code,
CMD_GETVERSION should return vmware-vmx-type in ECX register.
Default is to fake host as VMware ESX server. But user can control
this value by "-global vmport.vmware-vmx-type=X".
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200312165431.82118-7-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is used as a signal for VMware Tools to know if a command it
attempted to invoke, failed or is unsupported. As a result, VMware Tools
will either report failure to user or fallback to another backdoor command
in attempt to perform some operation.
A few examples:
* open-vm-tools TimeSyncReadHost() function fallbacks to
CMD_GETTIMEFULL command when CMD_GETTIMEFULL_WITH_LAG
fails/unsupported.
* open-vm-tools Hostinfo_NestingSupported() function verifies
EAX != -1 to check for success.
* open-vm-tools Hostinfo_VCPUInfoBackdoor() functions checks
if reserved-bit is set to indicate command is unimplemented.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200312165431.82118-5-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmport_ioport_read() returns the value that should propagate to vCPU EAX
register when guest reads VMPort IOPort (i.e. By x86 IN instruction).
However, because vmport_ioport_read() calls cpu_synchronize_state(), the
returned value gets overridden by the value in QEMU vCPU EAX register.
i.e. cpu->env.regs[R_EAX].
To fix this issue, change vmport_ioport_read() to explicitly override
cpu->env.regs[R_EAX] with the value it wish to propagate to vCPU EAX
register.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200312165431.82118-4-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Options -M memory-backend and -numa memdev are mutually exclusive,
and if used together, it might lead to a crash in the worst case.
For example when the same backend is used with these options together:
-m 4G \
-object memory-backend-ram,id=mem0,size=4G \
-M pc,memory-backend=mem0 \
-numa node,memdev=mem0
QEMU will abort with:
exec.c:2006: qemu_ram_set_idstr: Assertion `!new_block->idstr[0]' failed.
and following backtrace:
abort ()
qemu_ram_set_idstr ()
vmstate_register_ram ()
vmstate_register_ram_global ()
machine_consume_memdev ()
numa_init_memdev_container ()
numa_complete_configuration ()
machine_run_board_init ()
add a check to error out in case the user tries to use both options at
the same time.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200511141103.43768-3-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need to make certain to advertise support for page poison reporting if
we want to actually get data on if the guest will be poisoning pages.
Add a value for reporting the poison value being used if page poisoning is
enabled in the guest. With this we can determine if we will need to skip
free page reporting when it is enabled in the future.
The value currently has no impact on existing balloon interfaces. In the
case of existing balloon interfaces the onus is on the guest driver to
reapply whatever poison is in place.
When we add free page reporting the poison value is used to determine if
we can perform in-place page reporting. The expectation is that a reported
page will already contain the value specified by the poison, and the
reporting of the page should not change that value.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Message-Id: <20200527041400.12700.33251.stgit@localhost.localdomain>
Add an entry for the 'empty_slot' device.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-7-f4bug@amsat.org>
Add a 'name' qdev property so when multiple slots are
accessed, we can notice which one is accessed.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-5-f4bug@amsat.org>
Empty slots model RAZ/WI access on a bus. Since we can still
(hot) plug devices on the bus, lower the slot priority, so
device added later is accessed first.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-3-f4bug@amsat.org>
The OBJECT() macro is defined as:
#define OBJECT(obj) ((Object *)(obj))
Remove the unnecessary OBJECT() casts when we already know the
pointer is of Object type.
Patch created mechanically using spatch with this script:
@@
typedef Object;
Object *o;
@@
- OBJECT(o)
+ o
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200512070020.22782-3-f4bug@amsat.org>
[Trivial rebase conflict in hw/s390x/sclp.c resolved]
Same story as for object_property_add(): the only way
object_property_del() can fail is when the property with this name
does not exist. Since our property names are all hardcoded, failure
is a programming error, and the appropriate way to handle it is
passing &error_abort. Most callers do that, the commit before
previous fixed one that didn't (and got the error handling wrong), and
the two remaining exceptions ignore errors.
Drop the @errp parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Devices may have component devices and buses.
Device realization may fail. Realization is recursive: a device's
realize() method realizes its components, and device_set_realized()
realizes its buses (which should in turn realize the devices on that
bus, except bus_set_realized() doesn't implement that, yet).
When realization of a component or bus fails, we need to roll back:
unrealize everything we realized so far. If any of these unrealizes
failed, the device would be left in an inconsistent state. Must not
happen.
device_set_realized() lets it happen: it ignores errors in the roll
back code starting at label child_realize_fail.
Since realization is recursive, unrealization must be recursive, too.
But how could a partly failed unrealize be rolled back? We'd have to
re-realize, which can fail. This design is fundamentally broken.
device_set_realized() does not roll back at all. Instead, it keeps
unrealizing, ignoring further errors.
It can screw up even for a device with no buses: if the lone
dc->unrealize() fails, it still unregisters vmstate, and calls
listeners' unrealize() callback.
bus_set_realized() does not roll back either. Instead, it stops
unrealizing.
Fortunately, no unrealize method can fail, as we'll see below.
To fix the design error, drop parameter @errp from all the unrealize
methods.
Any unrealize method that uses @errp now needs an update. This leads
us to unrealize() methods that can fail. Merely passing it to another
unrealize method cannot cause failure, though. Here are the ones that
do other things with @errp:
* virtio_serial_device_unrealize()
Fails when qbus_set_hotplug_handler() fails, but still does all the
other work. On failure, the device would stay realized with its
resources completely gone. Oops. Can't happen, because
qbus_set_hotplug_handler() can't actually fail here. Pass
&error_abort to qbus_set_hotplug_handler() instead.
* hw/ppc/spapr_drc.c's unrealize()
Fails when object_property_del() fails, but all the other work is
already done. On failure, the device would stay realized with its
vmstate registration gone. Oops. Can't happen, because
object_property_del() can't actually fail here. Pass &error_abort
to object_property_del() instead.
* spapr_phb_unrealize()
Fails and bails out when remove_drcs() fails, but other work is
already done. On failure, the device would stay realized with some
of its resources gone. Oops. remove_drcs() fails only when
chassis_from_bus()'s object_property_get_uint() fails, and it can't
here. Pass &error_abort to remove_drcs() instead.
Therefore, no unrealize method can fail before this patch.
device_set_realized()'s recursive unrealization via bus uses
object_property_set_bool(). Can't drop @errp there, so pass
&error_abort.
We similarly unrealize with object_property_set_bool() elsewhere,
always ignoring errors. Pass &error_abort instead.
Several unrealize methods no longer handle errors from other unrealize
methods: virtio_9p_device_unrealize(),
virtio_input_device_unrealize(), scsi_qdev_unrealize(), ...
Much of the deleted error handling looks wrong anyway.
One unrealize methods no longer ignore such errors:
usb_ehci_pci_exit().
Several realize methods no longer ignore errors when rolling back:
v9fs_device_realize_common(), pci_qdev_unrealize(),
spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(),
virtio_device_realize().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-17-armbru@redhat.com>
Several functions can't fail anymore: ich9_pm_add_properties(),
device_add_bootindex_property(), ppc_compat_add_property(),
spapr_caps_add_properties(), PropertyInfo.create(). Drop their @errp
parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-16-armbru@redhat.com>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
Both qdev_connect_gpio_out_named() and device_set_realized() put
objects without a parent into the "/machine/unattached/" orphanage.
qdev_connect_gpio_out_named() needs a lengthy comment to explain how
it works. It exploits that object_property_add_child() can fail only
when we got a parent already, and ignoring that error does what we
want. True. If it failed due to "duplicate property", we'd be in
trouble, but that would be a programming error.
device_set_realized() is cleaner: it checks whether we need a parent,
then calls object_property_add_child(), aborting on failure. No need
for a comment, and programming errors get caught.
Change qdev_connect_gpio_out_named() to match.
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200505152926.18877-14-armbru@redhat.com>
object_property_set_description() and
object_class_property_set_description() fail only when property @name
is not found.
There are 85 calls of object_property_set_description() and
object_class_property_set_description(). None of them can fail:
* 84 immediately follow the creation of the property.
* The one in spapr_rng_instance_init() refers to a property created in
spapr_rng_class_init(), from spapr_rng_properties[].
Every one of them still gets to decide what to pass for @errp.
51 calls pass &error_abort, 32 calls pass NULL, one receives the error
and propagates it to &error_abort, and one propagates it to
&error_fatal. I'm actually surprised none of them violates the Error
API.
What are we gaining by letting callers handle the "property not found"
error? Use when the property is not known to exist is simpler: you
don't have to guard the call with a check. We haven't found such a
use in 5+ years. Until we do, let's make life a bit simpler and drop
the @errp parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-8-armbru@redhat.com>
[One semantic rebase conflict resolved]
qom/object.c provides object_property_get_TYPE() and
object_property_set_TYPE() for a number of common types. These are
all convenience wrappers around object_property_get_qobject() and
object_property_set_qobject().
Except for object_property_get_uint16List(), which is unusual in two ways:
* It bypasses object_property_get_qobject(). Fixable; the previous
commit did it for object_property_get_enum())
* It stores the value through a parameter. Its contract claims it
returns the value, like the other functions do. Also fixable.
Fixing is not worthwhile, though: object_property_get_uint16List() has
seen exactly one user in six years.
Convert the lone user to do its job with the generic
object_property_get_qobject(), and drop object_property_get_uint16List().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200505152926.18877-6-armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[Commit message typo fixed]
Some stream clients stream an endless stream of data while
other clients stream data in packets. Stream interfaces
usually have a way to signal the end of a packet or the
last beat of a transfer.
This adds an end-of-packet flag to the push interface.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <20200506082513.18751-6-edgar.iglesias@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAl6yxrEACgkQda1lgCoL
QhELMQf8CNGtB1xmiVL9GY3RJRkcWGTmQ5/wPJ+Fuf6A2fWP9bYWBemJQcqVN+xR
1fBXT2jcZvOy0N0CpioY2tin2oSWXCvVGcoaZbBpiDwGqzLrXzNheOKW9A3530zN
LAc8plTGpL90b2P/lkYSdUlBS3XK30wVdaxDtpFrhT43miJlRL16fTRDOjWPmNHi
+tbI/hGybI2wSjzotzB+g3cP54SD1eZJmXR0498vAJiO5OtpVdC/NGr4Ma+BT+If
Obf46XmgfCRLsqDJQbLNM6vVCN+MuE12BGVDSA2OX7oD6SBGQsb53asuqJ8TutWR
CsBs50WDMQFPgnOvMhHepFP/HzldaQ==
=VnhL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2020-05-06-1' into staging
Merge tpm 2020/05/06 v1
# gpg: Signature made Wed 06 May 2020 15:16:17 BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2020-05-06-1:
hw: add compat machines for 5.1
hw/arm/virt: Remove the compat forcing tpm-tis-device PPI to off
tpm: tpm-tis-device: set PPI to false by default
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There was no support for 8 bits block registers. Changed
register_init_block32 to be generic and static, adding register
size in bits as parameter. Created one helper for each size.
Signed-off-by: Joaquin de Andres <me@xcancerberox.com.ar>
Message-Id: <20200402162839.76636-1-me@xcancerberox.com.ar>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Introduce a function and macro helpers to setup several clocks
in a device from a static array description.
An element of the array describes the clock (name and direction) as
well as the related callback and an optional offset to store the
created object pointer in the device state structure.
The array must be terminated by a special element QDEV_CLOCK_END.
This is based on the original work of Frederic Konrad.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-5-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add functions to easily handle clocks with devices.
Clock inputs and outputs should be used to handle clock propagation
between devices.
The API is very similar the GPIO API.
This is based on the original work of Frederic Konrad.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200406135251.157596-4-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-3-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This object may be used to represent a clock inside a clock tree.
A clock may be connected to another clock so that it receives update,
through a callback, whenever the source/parent clock is updated.
Although only the root clock of a clock tree controls the values
(represented as periods) of all clocks in tree, each clock holds
a local state containing the current value so that it can be fetched
independently. It will allows us to fullfill migration requirements
by migrating each clock independently of others.
This is based on the original work of Frederic Konrad.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-2-damien.hedde@greensocs.com
[PMM: Use uint64_t rather than unsigned long long in trace events;
the dtrace backend can't handle the latter]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The previous few commits have made this more obvious, and removed the
one exception. Time to clarify the documentation, and drop dead error
checking.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-13-armbru@redhat.com>
Any sub-page size update to ACPI MRs will be lost during
migration, as we use aligned size in ram_load_precopy() ->
qemu_ram_resize() path. This will result in inconsistency in
FWCfgEntry sizes between source and destination. In order to avoid
this, save and restore them separately during migration.
Up until now, this problem may not be that relevant for x86 as both
ACPI table and Linker MRs gets padded and aligned. Also at present,
qemu_ram_resize() doesn't invoke callback to update FWCfgEntry for
unaligned size changes. But since we are going to fix the
qemu_ram_resize() in the subsequent patch, the issue may become
more serious especially for RSDP MR case.
Moreover, the issue will soon become prominent in arm/virt as well
where the MRs are not padded or aligned at all and eventually have
acpi table changes as part of future additions like NVDIMM hot-add
feature.
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200403101827.30664-3-shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The https://makecode.microbit.org/#editor generates slightly weird
.hex files which work fine on a real microbit but causes QEMU to
choke. The reason is extraneous data after the EOF record which causes
the loader to attempt to write a bigger file than it should to the
"rom". According to the HEX file spec an EOF really should be the last
thing we process so lets do that.
Reported-by: Ursula Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200403191150.863-12-alex.bennee@linaro.org>
Commit bb15791166 ("compat: disable edid on virtio-gpu base
device") tried to disable 'edid' on the virtio-gpu base device.
However, that device is not 'virtio-gpu', but 'virtio-gpu-device'.
Fix it.
Fixes: bb15791166 ("compat: disable edid on virtio-gpu base device")
Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Tested-by: Lukáš Doktor <ldoktor@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20200318093919.24942-1-cohuck@redhat.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Bug fixes:
* memory encryption: Disable mem merge
(Dr. David Alan Gilbert)
Features:
* New EPYC CPU definitions (Babu Moger)
* Denventon-v2 CPU model (Tao Xu)
* New 'note' field on versioned CPU models (Tao Xu)
Cleanups:
* x86 CPU topology cleanups (Babu Moger)
* cpu: Use DeviceClass reset instead of a special CPUClass reset
(Peter Maydell)
-----BEGIN PGP SIGNATURE-----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=9fEL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue for 5.0 soft freeze
Bug fixes:
* memory encryption: Disable mem merge
(Dr. David Alan Gilbert)
Features:
* New EPYC CPU definitions (Babu Moger)
* Denventon-v2 CPU model (Tao Xu)
* New 'note' field on versioned CPU models (Tao Xu)
Cleanups:
* x86 CPU topology cleanups (Babu Moger)
* cpu: Use DeviceClass reset instead of a special CPUClass reset
(Peter Maydell)
# gpg: Signature made Wed 18 Mar 2020 01:16:43 GMT
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-and-machine-pull-request:
hw/i386: Rename apicid_from_topo_ids to x86_apicid_from_topo_ids
hw/i386: Update structures to save the number of nodes per package
hw/i386: Remove unnecessary initialization in x86_cpu_new
machine: Add SMP Sockets in CpuTopology
hw/i386: Consolidate topology functions
hw/i386: Introduce X86CPUTopoInfo to contain topology info
cpu: Use DeviceClass reset instead of a special CPUClass reset
machine/memory encryption: Disable mem merge
hw/i386: Rename X86CPUTopoInfo structure to X86CPUTopoIDs
i386: Add 2nd Generation AMD EPYC processors
i386: Add missing cpu feature bits in EPYC model
target/i386: Add new property note to versioned CPU models
target/i386: Add Denverton-v2 (no MPX) CPU model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- docker updates for VirGL
- re-factor gdbstub for static GDBState
- re-factor gdbstub for dynamic arrays
- add SVE support to arm gdbstub
- add some guest debug tests to check-tcg
- add aarch64 userspace register tests
- remove packet size limit to gdbstub
- simplify gdbstub monitor code
- report vContSupported in gdbstub to use proper single-step
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl5xDUIACgkQ+9DbCVqe
KkQwCwf/YtmUsNxxO+CgNctq2u3jV4FoOdQP3bejvmT2+cigKJhQuBlWPg1/YsqF
RDNkmBQx2JaVVMuVmpnwVK1UD+kmYZqrtlOkPNcVrjPmLCq3BVI1LHe6Rjoerx8F
QoZyH0IMNHbBgDo1I46lSFOWcxmOvo+Ow7NX5bPKwlRzf0dyEqSJahRaZLAgUscR
taTtGfk9uQsnxoRsvH/efiQ4bZtUvrEQuhEX3WW/yVE1jTpcb2llwX4xONJb2It3
/0WREGEEIT8PpnWw2S3FH4THY/BjWgz/FPDwNNZYCKBMWDjuG/8KHryd738T9rzo
lkGP9YcXmiyxMMyFFwS8RD3SHr8LvQ==
=Wm+a
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-gdbstub-170320-1' into staging
Testing and gdbstub updates:
- docker updates for VirGL
- re-factor gdbstub for static GDBState
- re-factor gdbstub for dynamic arrays
- add SVE support to arm gdbstub
- add some guest debug tests to check-tcg
- add aarch64 userspace register tests
- remove packet size limit to gdbstub
- simplify gdbstub monitor code
- report vContSupported in gdbstub to use proper single-step
# gpg: Signature made Tue 17 Mar 2020 17:47:46 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-gdbstub-170320-1: (28 commits)
gdbstub: Fix single-step issue by confirming 'vContSupported+' feature to gdb
gdbstub: do not split gdb_monitor_write payload
gdbstub: change GDBState.last_packet to GByteArray
tests/tcg/aarch64: add test-sve-ioctl guest-debug test
tests/tcg/aarch64: add SVE iotcl test
tests/tcg/aarch64: add a gdbstub testcase for SVE registers
tests/guest-debug: add a simple test runner
configure: allow user to specify what gdb to use
tests/tcg/aarch64: userspace system register test
target/arm: don't bother with id_aa64pfr0_read for USER_ONLY
target/arm: generate xml description of our SVE registers
target/arm: default SVE length to 64 bytes for linux-user
target/arm: explicitly encode regnum in our XML
target/arm: prepare for multiple dynamic XMLs
gdbstub: extend GByteArray to read register helpers
target/i386: use gdb_get_reg helpers
target/m68k: use gdb_get_reg helpers
target/arm: use gdb_get_reg helpers
gdbstub: add helper for 128 bit registers
gdbstub: move mem_buf to GDBState and use GByteArray
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Store the smp sockets in CpuTopology. The socket information required to
build the apic id in EPYC mode. Right now socket information is not passed
to down when decoding the apic id. Add the socket information here.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <158396718647.58170.2278448323151215741.stgit@naples-babu.amd.com>
The CPUClass has a 'reset' method. This is a legacy from when
TYPE_CPU used not to inherit from TYPE_DEVICE. We don't need it any
more, as we can simply use the TYPE_DEVICE reset. The 'cpu_reset()'
function is kept as the API which most places use to reset a CPU; it
is now a wrapper which calls device_cold_reset() and then the
tracepoint function.
This change should not cause CPU objects to be reset more often
than they are at the moment, because:
* nobody is directly calling device_cold_reset() or
qdev_reset_all() on CPU objects
* no CPU object is on a qbus, so they will not be reset either
by somebody calling qbus_reset_all()/bus_cold_reset(), or
by the main "reset sysbus and everything in the qbus tree"
reset that most devices are reset by
Note that this does not change the need for each machine or whatever
to use qemu_register_reset() to arrange to call cpu_reset() -- that
is necessary because CPU objects are not on any qbus, so they don't
get reset when the qbus tree rooted at the sysbus bus is reset, and
this isn't being changed here.
All the changes to the files under target/ were made using the
included Coccinelle script, except:
(1) the deletion of the now-inaccurate and not terribly useful
"CPUClass::reset" comments was done with a perl one-liner afterwards:
perl -n -i -e '/ CPUClass::reset/ or print' target/*/*.c
(2) this bit of the s390 change was done by hand, because the
Coccinelle script is not sophisticated enough to handle the
parent_reset call being inside another function:
| @@ -96,8 +96,9 @@ static void s390_cpu_reset(CPUState *s, cpu_reset_type type)
| S390CPU *cpu = S390_CPU(s);
| S390CPUClass *scc = S390_CPU_GET_CLASS(cpu);
| CPUS390XState *env = &cpu->env;
|+ DeviceState *dev = DEVICE(s);
|
|- scc->parent_reset(s);
|+ scc->parent_reset(dev);
| cpu->env.sigp_order = 0;
| s390_cpu_set_state(S390_CPU_STATE_STOPPED, cpu);
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200303100511.5498-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When a host is running with memory encryption, the memory isn't visible
to the host kernel; attempts to merge that memory are futile because
what it's really comparing is encrypted memory, usually encrypted
with different keys.
Automatically turn mem-merge off when memory encryption is specified.
https://bugzilla.redhat.com/show_bug.cgi?id=1796356
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200130175046.85850-1-dgilbert@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of passing a pointer to memory now just extend the GByteArray
to all the read register helpers. They can then safely append their
data through the normal way. We don't bother with this abstraction for
write registers as we have already ensured the buffer being copied
from is the correct size.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20200316172155.971-15-alex.bennee@linaro.org>
Avoid orphan memory regions being added in the /unattached QOM
container.
This commit was produced with the Coccinelle script
scripts/coccinelle/memory-region-housekeeping.cocci.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Commit 355477f8c7 skips rom reset when we're an incoming migration
so as not to overwrite shared ram in the ignore-shared migration
optimisation.
However, it's got an unexpected side effect that because it skips
freeing the ROM data, when rom_reset gets called later on, after
migration (e.g. during a reboot), the ROM does get reset to the original
file contents. Because of seabios/x86's weird reboot process
this confuses a reboot into hanging after a migration.
Fixes: 355477f8c7 ("migration: do not rom_reset() during incoming migration")
https://bugzilla.redhat.com/show_bug.cgi?id=1809380
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This will store the compression method to use. We start with none.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
Rename multifd-method to multifd-compression
This series removes ad hoc RAM allocation API (memory_region_allocate_system_memory)
and consolidates it around hostmem backend. It allows to
* resolve conflicts between global -mem-prealloc and hostmem's "policy" option,
fixing premature allocation before binding policy is applied
* simplify complicated memory allocation routines which had to deal with 2 ways
to allocate RAM.
* reuse hostmem backends of a choice for main RAM without adding extra CLI
options to duplicate hostmem features. A recent case was -mem-shared, to
enable vhost-user on targets that don't support hostmem backends [1] (ex: s390)
* move RAM allocation from individual boards into generic machine code and
provide them with prepared MemoryRegion.
* clean up deprecated NUMA features which were tied to the old API (see patches)
- "numa: remove deprecated -mem-path fallback to anonymous RAM"
- (POSTPONED, waiting on libvirt side) "forbid '-numa node,mem' for 5.0 and newer machine types"
- (POSTPONED) "numa: remove deprecated implicit RAM distribution between nodes"
Introduce a new machine.memory-backend property and wrapper code that aliases
global -mem-path and -mem-alloc into automatically created hostmem backend
properties (provided memory-backend was not set explicitly given by user).
A bulk of trivial patches then follow to incrementally convert individual
boards to using machine.memory-backend provided MemoryRegion.
Board conversion typically involves:
* providing MachineClass::default_ram_size and MachineClass::default_ram_id
so generic code could create default backend if user didn't explicitly provide
memory-backend or -m options
* dropping memory_region_allocate_system_memory() call
* using convenience MachineState::ram MemoryRegion, which points to MemoryRegion
allocated by ram-memdev
On top of that for some boards:
* missing ram_size checks are added (typically it were boards with fixed ram size)
* ram_size fixups are replaced by checks and hard errors, forcing user to
provide correct "-m" values instead of ignoring it and continuing running.
After all boards are converted, the old API is removed and memory allocation
routines are cleaned up.
The goal is to reduce the amount of requests issued by a guest on
1M reads/writes. This rises the performance up to 4% on that kind of
disk access pattern.
The maximum chunk size to be used for the guest disk accessing is
limited with seg_max parameter, which represents the max amount of
pices in the scatter-geather list in one guest disk request.
Since seg_max is virqueue_size dependent, increasing the virtqueue
size increases seg_max, which, in turn, increases the maximum size
of data to be read/write from a guest disk.
More details in the original problem statment:
https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg03721.html
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-id: 20200214074648.958-1-dplotnikov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
all boards were switched to using memdev backend for main RAM,
so we can drop no longer used memory_region_allocate_system_memory()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-73-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-40-imammedo@redhat.com>
In case of NUMA there are 2 cases to consider:
1. '-numa node,memdev', the only one that will be available
for 5.0 and newer machine types.
In this case reuse current behavior, with only difference
memdevs are put into MachineState::ram container +
a temporary glue to keep memory_region_allocate_system_memory()
working until all boards converted.
2. fake NUMA ("-numa node mem" and default RAM splitting)
the later has been deprecated and will be removed but the former
is going to stay available for compat reasons for 5.0 and
older machine types
it takes allocate_system_memory_nonnuma() path, like non-NUMA
case and falls under conversion to memdev. So extend non-NUMA
MachineState::ram initialization introduced in previous patch
to take care of fake NUMA case.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200219160953.13771-6-imammedo@redhat.com>
the new field will be used by boards to get access to main
RAM memory region and will help to save boiler plate in
boards which often introduce a field or variable just for
this purpose.
Memory region will be equivalent to what currently used
memory_region_allocate_system_memory() is returning apart
from that it will come from hostmem backend.
Followup patches will incrementally switch boards to using
RAM from MachineState::ram.
Patch takes care of non-NUMA case and follow up patch will
initialize MachineState::ram for NUMA case.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-5-imammedo@redhat.com>
Property will contain link to memory backend that will be
used for backing initial RAM.
Follow up commit will alias -mem-path and -mem-prealloc
CLI options into memory backend options to make memory
handling consistent (using only hostmem backend family
for guest RAM allocation).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-3-imammedo@redhat.com>
it has been deprecated since 4.0 by commit
cb79224b7 (deprecate -mem-path fallback to anonymous RAM)
Deprecation period ran out and it's time to remove it
so it won't get in a way of switching to using hostmem
backend for RAM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-2-imammedo@redhat.com>
The only difference to hardware revision 4 is that the device doesn't
switch to VGA mode in case someone happens to touch a VGA register,
which should make things more robust in configurations with multiple
vga devices.
Swtiching back to VGA mode happens on reset, either full machine
reset or qxl device reset (QXL_IO_RESET ioport command).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20200206074358.4274-1-kraxel@redhat.com
Commit ed65fd1a27 ("virtio-blk: switch off scsi-passthrough by
default") changed the default value of the 'scsi' property of
virtio-blk, which is only available on Linux hosts. It also added
an unconditional compat entry for 2.4 or earlier machines.
Trying to set this property on a pre-2.5 machine on OSX, we get:
Unexpected error in object_property_find() at qom/object.c:1201:
qemu-system-x86_64: -device virtio-blk-pci,id=scsi0,drive=drive0: can't apply global virtio-blk-device.scsi=true: Property '.scsi' not found
Fix this error by marking the property optional.
Fixes: ed65fd1a27 ("virtio-blk: switch off scsi-passthrough by default")
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200207001404.1739-1-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We have many files that apparently do not depend on the target CPU
configuration, i.e. which can be put into common-obj-y instead of
obj-y. This way, the code can be shared for example between
qemu-system-arm and qemu-system-aarch64, or the various big and
little endian variants like qemu-system-sh4 and qemu-system-sh4eb,
so that we do not have to compile the code multiple times anymore.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200130133841.10779-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Deprecate device_legacy_reset(), qdev_reset_all() and
qbus_reset_all() to be replaced by new functions
device_cold_reset() and bus_cold_reset() which uses resettable API.
Also introduce resettable_cold_reset_fn() which may be used as a
replacement for qdev_reset_all_fn and qbus_reset_all_fn().
Following patches will be needed to look at legacy reset call sites
and switch to resettable api. The legacy functions will be removed
when unused.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-9-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit make use of the resettable API to reset the device being
hotplugged when it is realized. Also it ensures it is put in a reset
state coherent with the parent it is plugged into.
Note that there is a difference in the reset. Instead of resetting
only the hotplugged device, we reset also its subtree (switch to
resettable API). This is not expected to be a problem because
sub-buses are just realized too. If a hotplugged device has any
sub-buses it is logical to reset them too at this point.
The recently added should_be_hidden and PCI's partially_hotplugged
mechanisms do not interfere with realize operation:
+ In the should_be_hidden use case, device creation is
delayed.
+ The partially_hotplugged mechanism prevents a device to be
unplugged and unrealized from qdev POV and unrealized.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-8-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In qdev_set_parent_bus(), when changing the parent bus of a
realized device, if the source and destination buses are not in the
same reset state, some adaptations are required. This patch adds
needed call to resettable_change_parent() to make sure a device reset
state stays coherent with its parent bus.
The addition is a no-op if:
1. the device being parented is not realized.
2. the device is realized, but both buses are not under reset.
Case 2 means that as long as qdev_set_parent_bus() is called
during the machine realization procedure (which is before the
machine reset so nothing is in reset), it is a no op.
There are 52 call sites of qdev_set_parent_bus(). All but one fall
into the no-op case:
+ 29 trivial calls related to virtio (in hw/{s390x,display,virtio}/
{vhost,virtio}-xxx.c) to set a vdev(or vgpu) composing device
parent bus just before realizing the same vdev(vgpu).
+ hw/core/qdev.c: when creating a device in qdev_try_create()
+ hw/core/sysbus.c: when initializing a device in the sysbus
+ hw/i386/amd_iommu.c: before realizing AMDVIState/pci
+ hw/isa/piix4.c: before realizing PIIX4State/rtc
+ hw/misc/auxbus.c: when creating an AUXBus
+ hw/misc/auxbus.c: when creating an AUXBus child
+ hw/misc/macio/macio.c: when initializing a MACIOState child
+ hw/misc/macio/macio.c: before realizing NewWorldMacIOState/pmu
+ hw/misc/macio/macio.c: before realizing NewWorldMacIOState/cuda
+ hw/net/virtio-net.c: Used for migration when using the failover
mechanism to migration a vfio-pci/net. It is
a no-op because at this point the device is
already on the bus.
+ hw/pci-host/designware.c: before realizing DesignwarePCIEHost/root
+ hw/pci-host/gpex.c: before realizing GPEXHost/root
+ hw/pci-host/prep.c: when initialiazing PREPPCIState/pci_dev
+ hw/pci-host/q35.c: before realizing Q35PCIHost/mch
+ hw/pci-host/versatile.c: when initializing PCIVPBState/pci_dev
+ hw/pci-host/xilinx-pcie.c: before realizing XilinxPCIEHost/root
+ hw/s390x/event-facility.c: when creating SCLPEventFacility/
TYPE_SCLP_QUIESCE
+ hw/s390x/event-facility.c: ditto with SCLPEventFacility/
TYPE_SCLP_CPU_HOTPLUG
+ hw/s390x/sclp.c: Not trivial because it is called on a SLCPDevice
just after realizing it. Ok because at this point the destination
bus (sysbus) is not in reset; the realize step is before the
machine reset.
+ hw/sd/core.c: Not OK. Used in sdbus_reparent_card(). See below.
+ hw/ssi/ssi.c: Used to put spi slave on spi bus and connect the cs
line in ssi_auto_connect_slave(). Ok because this function is only
used in realize step in hw/ssi/aspeed_smc.ci, hw/ssi/imx_spi.c,
hw/ssi/mss-spi.c, hw/ssi/xilinx_spi.c and hw/ssi/xilinx_spips.c.
+ hw/xen/xen-legacy-backend.c: when creating a XenLegacyDevice device
+ qdev-monitor.c: in device hotplug creation procedure before realize
Note that this commit alone will have no effect, right now there is no
use of resettable API to reset anything. So a bus will never be tagged
as in-reset by this same API.
The one place where side-effect will occurs is in hw/sd/core.c in
sdbus_reparent_card(). This function is only used in the raspi machines,
including during the sysbus reset procedure. This case will be
carrefully handled when doing the multiple phase reset transition.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-7-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a function resettable_change_parent() to do the required
plumbing when changing the parent a of Resettable object.
We need to make sure that the reset state of the object remains
coherent with the reset state of the new parent.
We make the 2 following hypothesis:
+ when an object is put in a parent under reset, the object goes in
reset.
+ when an object is removed from a parent under reset, the object
leaves reset.
The added function avoids any glitch if both old and new parent are
already in reset.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-6-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds support of Resettable interface to buses and devices:
+ ResettableState structure is added in the Bus/Device state
+ Resettable methods are implemented.
+ device/bus_is_in_reset function defined
This commit allows to transition the objects to the new
multi-phase interface without changing the reset behavior at all.
Object single reset method can be split into the 3 different phases
but the 3 phases are still executed in a row for a given object.
From the qdev/qbus reset api point of view, nothing is changed.
qdev_reset_all() and qbus_reset_all() are not modified as well as
device_legacy_reset().
Transition of an object must be done from parent class to child class.
Care has been taken to allow the transition of a parent class
without requiring the child classes to be transitioned at the same
time. Note that SysBus and SysBusDevice class do not need any transition
because they do not override the legacy reset method.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-5-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit defines an interface allowing multi-phase reset. This aims
to solve a problem of the actual single-phase reset (built in
DeviceClass and BusClass): reset behavior is dependent on the order
in which reset handlers are called. In particular doing external
side-effect (like setting an qemu_irq) is problematic because receiving
object may not be reset yet.
The Resettable interface divides the reset in 3 well defined phases.
To reset an object tree, all 1st phases are executed then all 2nd then
all 3rd. See the comments in include/hw/resettable.h for a more complete
description. The interface defines 3 phases to let the future
possibility of holding an object into reset for some time.
The qdev/qbus reset in DeviceClass and BusClass will be modified in
following commits to use this interface. A mechanism is provided
to allow executing a transitional reset handler in place of the 2nd
phase which is executed in children-then-parent order inside a tree.
This will allow to transition devices and buses smoothly while
keeping the exact current qdev/qbus reset behavior for now.
Documentation will be added in a following commit.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-4-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds trace events to reset procedure and when updating the parent
bus of a device.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-3-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a temporary device_legacy_reset function doing what
device_reset does to prepare for the transition with Resettable
API.
All occurrence of device_reset in the code tree are also replaced
by device_legacy_reset.
The new resettable API has different prototype and semantics
(resetting child buses as well as the specified device). Subsequent
commits will make the changeover for each call site individually; once
that is complete device_legacy_reset() will be removed.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-2-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The num-lines property of the TYPE_OR_GATE device sets the number
of input lines it has. An assert() in or_irq_realize() restricts
this to the maximum supported by the implementation. However we
got the condition in the assert wrong: it should be using <=,
because num-lines == MAX_OR_LINES is permitted, and means that
all entries from 0 to MAX_OR_LINES-1 in the s->levels[] array
are used.
We didn't notice this previously because no user has so far
needed that many input lines.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200120142235.10432-1-peter.maydell@linaro.org
While loading the executable, some platforms (like AVR) need to
detect CPU type that executable is built for - and, with this patch,
this is enabled by reading the field 'e_flags' of the ELF header of
the executable in question. The change expands functionality of
the following functions:
- load_elf()
- load_elf_as()
- load_elf_ram()
- load_elf_ram_sym()
The argument added to these functions is called 'pflags' and is of
type 'uint32_t*' (that matches 'pointer to 'elf_word'', 'elf_word'
being the type of the field 'e_flags', in both 32-bit and 64-bit
variants of ELF header). Callers are allowed to pass NULL as that
argument, and in such case no lookup to the field 'e_flags' will
happen, and no information will be returned, of course.
CC: Richard Henderson <rth@twiddle.net>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Edgar E. Iglesias <edgar.iglesias@gmail.com>
CC: Michael Walle <michael@walle.cc>
CC: Thomas Huth <huth@tuxfamily.org>
CC: Laurent Vivier <laurent@vivier.eu>
CC: Philippe Mathieu-Daudé <f4bug@amsat.org>
CC: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
CC: Aurelien Jarno <aurelien@aurel32.net>
CC: Jia Liu <proljc@gmail.com>
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: BALATON Zoltan <balaton@eik.bme.hu>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Thomas Huth <thuth@redhat.com>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
CC: Fabien Chouteau <chouteau@adacore.com>
CC: KONRAD Frederic <frederic.konrad@adacore.com>
CC: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1580079311-20447-24-git-send-email-aleksandar.markovic@rt-rk.com>
Use class properties facilities to add properties to the class during
device_class_set_props().
qdev_property_add_static() must be adapted as PropertyInfo now
operates with classes (and not instances), so we must
set_default_value() on the ObjectProperty, before calling its init()
method on the object instance.
Also, PropertyInfo.create() is now exclusively used for class
properties. Fortunately, qdev_property_add_static() is only used in
target/arm/cpu.c so far, which doesn't use "link" properties (that
require create()).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200110153039.1379601-22-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the one-user function to the place it is being used.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200110153039.1379601-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All callers use error_abort, and even the function itself calls with
error_abort.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200110153039.1379601-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function is already documented in the header.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200110153039.1379601-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
