bdrv_co_drain() has not been used since commit 9a0cec664e ("mirror:
use bdrv_drained_begin/bdrv_drained_end") in 2016. Remove it so there
are fewer drain scenarios to worry about.
Use bdrv_drained_begin()/bdrv_drained_end() instead. They are "mixed"
functions that can be called from coroutine context. Unlike
bdrv_co_drain(), these functions provide control of the length of the
drained section, which is usually the right thing.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220521122714.3837731-1-stefanha@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_co_queue_restart_all is basically the same as qemu_co_enter_all
but without a QemuLockable argument. That's perfectly fine, but only as
long as the function is marked coroutine_fn. If used outside coroutine
context, qemu_co_queue_wait will attempt to take the lock and that
is just broken: if you are calling qemu_co_queue_restart_all outside
coroutine context, the lock is going to be a QemuMutex which cannot be
taken twice by the same thread.
The patch adds the marker to qemu_co_queue_restart_all and to its sole
non-coroutine_fn caller; it then reimplements the function in terms of
qemu_co_enter_all_impl, to remove duplicated code and to clarify that the
latter also works in coroutine context.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220427130830.150180-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.
This avoids the need for a constructor initialization too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* cleanups of qemu_oom_check() and qemu_memalign()
* target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
* target/arm/translate-neon: Simplify align field check for VLD3
* GICv3 ITS: add more trace events
* GICv3 ITS: implement 8-byte accesses properly
* GICv3: fix minor issues with some trace/log messages
* ui/cocoa: Use the standard about panel
* target/arm: Provide cpu property for controling FEAT_LPA2
* hw/arm/virt: Disable LPA2 for -machine virt-6.2
-----BEGIN PGP SIGNATURE-----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=ix0J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220307' into staging
target-arm queue:
* cleanups of qemu_oom_check() and qemu_memalign()
* target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
* target/arm/translate-neon: Simplify align field check for VLD3
* GICv3 ITS: add more trace events
* GICv3 ITS: implement 8-byte accesses properly
* GICv3: fix minor issues with some trace/log messages
* ui/cocoa: Use the standard about panel
* target/arm: Provide cpu property for controling FEAT_LPA2
* hw/arm/virt: Disable LPA2 for -machine virt-6.2
# gpg: Signature made Mon 07 Mar 2022 16:46:06 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20220307:
hw/arm/virt: Disable LPA2 for -machine virt-6.2
target/arm: Provide cpu property for controling FEAT_LPA2
ui/cocoa: Use the standard about panel
hw/intc/arm_gicv3_cpuif: Fix register names in ICV_HPPIR read trace event
hw/intc/arm_gicv3: Fix missing spaces in error log messages
hw/intc/arm_gicv3: Specify valid and impl in MemoryRegionOps
hw/intc/arm_gicv3_its: Add trace events for table reads and writes
hw/intc/arm_gicv3_its: Add trace events for commands
target/arm/translate-neon: Simplify align field check for VLD3
target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
osdep: Move memalign-related functions to their own header
util: Put qemu_vfree() in memalign.c
util: Use meson checks for valloc() and memalign() presence
util: Share qemu_try_memalign() implementation between POSIX and Windows
meson.build: Don't misdetect posix_memalign() on Windows
util: Return valid allocation for qemu_try_memalign() with zero size
util: Unify implementations of qemu_memalign()
util: Make qemu_oom_check() a static function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the various memalign-related functions out of osdep.h and into
their own header, which we include only where they are used.
While we're doing this, add some brief documentation comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-10-peter.maydell@linaro.org
Add new block driver handlers and corresponding generic wrappers.
It will be used to allow copy-before-write filter to provide
reach fleecing interface in further commit.
In future this approach may be used to allow reading qcow2 internal
snapshots, for example to export them through NBD.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-11-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
There is a bug in handling BDRV_REQ_NO_WAIT flag: we still may wait in
wait_serialising_requests() if request is unaligned. And this is
possible for the only user of this flag (preallocate filter) if
underlying file is unaligned to its request_alignment on start.
So, we have to fix preallocate filter to do only aligned preallocate
requests.
Next, we should fix generic block/io.c somehow. Keeping in mind that
preallocate is the only user of BDRV_REQ_NO_WAIT and that we have to
fix its behavior now, it seems more safe to just assert that we never
use BDRV_REQ_NO_WAIT with unaligned requests and add corresponding
comment. Let's do so.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20220215121609.38570-1-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
bdrv_refresh_limits() recurses down to the node's children. That does
not seem necessary: When we refresh limits on some node, and then
recurse down and were to change one of its children's BlockLimits, then
that would mean we noticed the changed limits by pure chance. The fact
that we refresh the parent's limits has nothing to do with it, so the
reason for the change probably happened before this point in time, and
we should have refreshed the limits then.
Consequently, we should actually propagate block limits changes upwards,
not downwards. That is a separate and pre-existing issue, though, and
so will not be addressed in this patch.
The problem with recursing is that bdrv_refresh_limits() is not atomic.
It begins with zeroing BDS.bl, and only then sets proper, valid limits.
If we do not drain all nodes whose limits are refreshed, then concurrent
I/O requests can encounter invalid request_alignment values and crash
qemu. Therefore, a recursing bdrv_refresh_limits() requires the whole
subtree to be drained, which is currently not ensured by most callers.
A non-recursive bdrv_refresh_limits() only requires the node in question
to not receive I/O requests, and this is done by most callers in some
way or another:
- bdrv_open_driver() deals with a new node with no parents yet
- bdrv_set_file_or_backing_noperm() acts on a drained node
- bdrv_reopen_commit() acts only on drained nodes
- bdrv_append() should in theory require the node to be drained; in
practice most callers just lock the AioContext, which should at least
be enough to prevent concurrent I/O requests from accessing invalid
limits
So we can resolve the bug by making bdrv_refresh_limits() non-recursive.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1879437
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220216105355.30729-2-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block coroutines functions run in different aiocontext, and are
not protected by the BQL. Therefore are I/O.
On the other side, generated_co_wrapper functions use BDRV_POLL_WHILE,
meaning the caller can either be the main loop or a specific iothread.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-25-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark all I/O functions with IO_CODE, and all "I/O OR GS" with
IO_OR_GS_CODE.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-14-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-13-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark all I/O functions with IO_CODE, and all "I/O OR GS" with
IO_OR_GS_CODE.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-6-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All the global state (GS) API functions will check that
qemu_in_main_thread() returns true. If not, it means
that the safety of BQL cannot be guaranteed, and
they need to be moved to I/O.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-5-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We update the block-status cache whenever we get new information from a
bdrv_co_block_status() call to the block driver. However, if we have
passed want_zero=false to that call, it may flag areas containing zeroes
as data, and so we would update the block-status cache with wrong
information.
Therefore, we should not update the cache with want_zero=false.
Reported-by: Nir Soffer <nsoffer@redhat.com>
Fixes: 0bc329fbb0 ("block: block-status cache for data regions")
Reviewed-by: Nir Soffer <nsoffer@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220118170000.49423-2-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Linux limits the size of iovecs to 1024 (UIO_MAXIOV in the kernel
sources, IOV_MAX in POSIX). Because of this, on some host adapters
requests with many iovecs are rejected with -EINVAL by the
io_submit() or readv()/writev() system calls.
In fact, the same limit applies to SG_IO as well. To fix both the
EINVAL and the possible performance issues from using fewer iovecs
than allowed by Linux (some HBAs have max_segments as low as 128),
introduce a separate entry in BlockLimits to hold the max_segments
value from sysfs. This new limit is used only for SG_IO and clamped
to bs->bl.max_iov anyway, just like max_hw_transfer is clamped to
bs->bl.max_transfer.
Reported-by: Halil Pasic <pasic@linux.ibm.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Cc: qemu-stable@nongnu.org
Fixes: 18473467d5 ("file-posix: try BLKSECTGET on block devices too, do not round to power of 2", 2021-06-25)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210923130436.1187591-1-pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that all drivers are updated by the previous commit, we can drop
the last limiter on pdiscard path: INT_MAX in bdrv_co_pdiscard().
Now everything is prepared for implementing incredibly cool and fast
big-discard requests in NBD and qcow2. And any other driver which wants
it of course.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210903102807.27127-12-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are going to support 64 bit discard requests. Now update the
limit variable. It's absolutely safe. The variable is set in some
drivers, and used in bdrv_co_pdiscard().
Update also max_pdiscard variable in bdrv_co_pdiscard(), so that
bdrv_co_pdiscard() is now prepared for 64bit requests. The remaining
logic including num, offset and bytes variables is already
supporting 64bit requests.
So the only thing that prevents 64 bit requests is limiting
max_pdiscard variable to INT_MAX in bdrv_co_pdiscard().
We'll drop this limitation after updating all block drivers.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210903102807.27127-10-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that all drivers are updated by previous commit, we can drop two
last limiters on write-zeroes path: INT_MAX in
bdrv_co_do_pwrite_zeroes() and bdrv_check_request32() in
bdrv_co_pwritev_part().
Now everything is prepared for implementing incredibly cool and fast
big-write-zeroes in NBD and qcow2. And any other driver which wants it
of course.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210903102807.27127-9-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are going to support 64 bit write-zeroes requests. Now update the
limit variable. It's absolutely safe. The variable is set in some
drivers, and used in bdrv_co_do_pwrite_zeroes().
Update also max_write_zeroes variable in bdrv_co_do_pwrite_zeroes(), so
that bdrv_co_do_pwrite_zeroes() is now prepared to 64bit requests. The
remaining logic including num, offset and bytes variables is already
supporting 64bit requests.
So the only thing that prevents 64 bit requests is limiting
max_write_zeroes variable to INT_MAX in bdrv_co_do_pwrite_zeroes().
We'll drop this limitation after updating all block drivers.
Ah, we also have bdrv_check_request32() in bdrv_co_pwritev_part(). It
will be modified to do bdrv_check_request() for write-zeroes path.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-7-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver write handlers parameters which are already 64bit to
signed type.
While being here, convert also flags parameter to be BdrvRequestFlags.
Now let's consider all callers. Simple
git grep '\->bdrv_\(aio\|co\)_pwritev\(_part\)\?'
shows that's there three callers of driver function:
bdrv_driver_pwritev() and bdrv_driver_pwritev_compressed() in
block/io.c, both pass int64_t, checked by bdrv_check_qiov_request() to
be non-negative.
qcow2_save_vmstate() does bdrv_check_qiov_request().
Still, the functions may be called directly, not only by drv->...
Let's check:
git grep '\.bdrv_\(aio\|co\)_pwritev\(_part\)\?\s*=' | \
awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \
while read func; do git grep "$func(" | \
grep -v "$func(BlockDriverState"; done
shows several callers:
qcow2:
qcow2_co_truncate() write at most up to @offset, which is checked in
generic qcow2_co_truncate() by bdrv_check_request().
qcow2_co_pwritev_compressed_task() pass the request (or part of the
request) that already went through normal write path, so it should
be OK
qcow:
qcow_co_pwritev_compressed() pass int64_t, it's updated by this patch
quorum:
quorum_co_pwrite_zeroes() pass int64_t and int - OK
throttle:
throttle_co_pwritev_compressed() pass int64_t, it's updated by this
patch
vmdk:
vmdk_co_pwritev_compressed() pass int64_t, it's updated by this
patch
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We modify the request by adding an offset to vmstate. Let's check the
modified request. It will help us to safely move .bdrv_co_preadv_part
and .bdrv_co_pwritev_part to int64_t type of offset and bytes.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210903102807.27127-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Only qcow2 driver supports vmstate.
In qcow2 these requests go through .bdrv_co_p{read,write}v_part
handlers.
So, let's do our basic check for the request on vmstate generic
handlers.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210903102807.27127-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
As we have attempted before
(https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg06451.html,
"file-posix: Cache lseek result for data regions";
https://lists.nongnu.org/archive/html/qemu-block/2021-02/msg00934.html,
"file-posix: Cache next hole"), this patch seeks to reduce the number of
SEEK_DATA/HOLE operations the file-posix driver has to perform. The
main difference is that this time it is implemented as part of the
general block layer code.
The problem we face is that on some filesystems or in some
circumstances, SEEK_DATA/HOLE is unreasonably slow. Given the
implementation is outside of qemu, there is little we can do about its
performance.
We have already introduced the want_zero parameter to
bdrv_co_block_status() to reduce the number of SEEK_DATA/HOLE calls
unless we really want zero information; but sometimes we do want that
information, because for files that consist largely of zero areas,
special-casing those areas can give large performance boosts. So the
real problem is with files that consist largely of data, so that
inquiring the block status does not gain us much performance, but where
such an inquiry itself takes a lot of time.
To address this, we want to cache data regions. Most of the time, when
bad performance is reported, it is in places where the image is iterated
over from start to end (qemu-img convert or the mirror job), so a simple
yet effective solution is to cache only the current data region.
(Note that only caching data regions but not zero regions means that
returning false information from the cache is not catastrophic: Treating
zeroes as data is fine. While we try to invalidate the cache on zero
writes and discards, such incongruences may still occur when there are
other processes writing to the image.)
We only use the cache for nodes without children (i.e. protocol nodes),
because that is where the problem is: Drivers that rely on block-status
implementations outside of qemu (e.g. SEEK_DATA/HOLE).
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/307
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210812084148.14458-3-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[hreitz: Added `local_file == bs` assertion, as suggested by Vladimir]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
When bdrv_pad_request() fails in bdrv_co_preadv_part(), bs->in_flight
has been increased, but is never decreased again. This leads to a hang
when trying to drain the block node.
This bug was observed with Windows guests which issue a request that
fully uses IOV_MAX during installation, so that when padding is
necessary (O_DIRECT with a 4k sector size block device on the host),
adding another entry causes failure.
Call bdrv_dec_in_flight() to fix this. There is a larger problem to
solve here because this request shouldn't even fail, but Windows doesn't
seem to care and with this minimal fix the installation succeeds. So
given that we're already in freeze, let's take this minimal fix for 6.1.
Fixes: 98ca45494f
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1972079
Reported-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210727154923.91067-1-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No need to start a tracked request that will always fail. The choice
to check read-only after bdrv_inc_in_flight() predates 1bc5f09f2e
(block: Use tracked request for truncate), but waiting for serializing
requests can make the effect more noticeable.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210609163034.997943-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For block host devices, I/O can happen through either the kernel file
descriptor I/O system calls (preadv/pwritev, io_submit, io_uring)
or the SCSI passthrough ioctl SG_IO.
In the latter case, the size of each transfer can be limited by the
HBA, while for file descriptor I/O the kernel is able to split and
merge I/O in smaller pieces as needed. Applying the HBA limits to
file descriptor I/O results in more system calls and suboptimal
performance, so this patch splits the max_transfer limit in two:
max_transfer remains valid and is used in general, while max_hw_transfer
is limited to the maximum hardware size. max_hw_transfer can then be
included by the scsi-generic driver in the block limits page, to ensure
that the stricter hardware limit is used.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's better to use accessor function instead of bs->read_only directly.
In some places use bdrv_is_writable() instead of
checking both BDRV_O_RDWR set and BDRV_O_INACTIVE not set.
In bdrv_open_common() it's a bit strange to add one more variable, but
we are going to drop bs->read_only in the next patch, so new ro local
variable substitutes it here.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210527154056.70294-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
They are unused now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210506090621.11848-3-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
write-notifiers are used only for write-threshold. New code for such
purpose should create filters.
Let's better special-case write-threshold and drop write notifiers at
all. (Actually, write-threshold is special-cased anyway, as the only
user of write-notifiers)
So, create a new direct interface for bdrv_co_write_req_prepare() and
drop all write-notifier related logic from write-threshold.c.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210506090621.11848-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[mreitz: Adjusted comment as per Eric's suggestion]
Signed-off-by: Max Reitz <mreitz@redhat.com>
To be used in further commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-28-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It will be used to stop retrying NBD requests on mirror cancel.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210205163720.887197-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert now copy_range parameters which are already 64bit to signed
type.
It's safe as we don't work with requests overflowing BDRV_MAX_LENGTH
(which is less than INT64_MAX), and do check the requests in
bdrv_co_copy_range_internal() (by bdrv_check_request32(), which calls
bdrv_check_request()).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-17-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
Now, since bdrv_co_preadv_part() and bdrv_co_pwritev_part() have been
updated, update all their wrappers.
For all of them type of 'bytes' is widening, so callers are safe. We
have update request_fn in blkverify.c simultaneously. Still it's just a
pointer to one of bdrv_co_pwritev() or bdrv_co_preadv(), and type is
widening for callers of the request_fn anyway.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-16-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, prepare bdrv_co_preadv_part() and bdrv_co_pwritev_part() and their
remaining dependencies now.
bdrv_pad_request() is updated simultaneously, as pointer to bytes passed
to it both from bdrv_co_pwritev_part() and bdrv_co_preadv_part().
So, all callers of bdrv_pad_request() are updated to pass 64bit bytes.
bdrv_pad_request() is already good for 64bit requests, add
corresponding assertion.
Look at bdrv_co_preadv_part() and bdrv_co_pwritev_part().
Type is widening, so callers are safe. Let's look inside the functions.
In bdrv_co_preadv_part() and bdrv_aligned_pwritev() we only pass bytes
to other already int64_t interfaces (and some obviously safe
calculations), it's OK.
In bdrv_co_do_zero_pwritev() aligned_bytes may become large now, still
it's passed to bdrv_aligned_pwritev which supports int64_t bytes.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-15-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, prepare bdrv_aligned_preadv() now.
Make the bytes variable in bdrv_padding_rmw_read() int64_t, as it is
only used for pass-through to bdrv_aligned_preadv().
All bdrv_aligned_preadv() callers are safe as type is widening. Let's
look inside:
- add a new-style assertion that request is good.
- callees bdrv_is_allocated(), bdrv_co_do_copy_on_readv() supports
int64_t bytes
- conversion of bytes_remaining is OK, as we never have requests
overflowing BDRV_MAX_LENGTH
- looping through bytes_remaining is ok, num is updated to int64_t
- for bdrv_driver_preadv we have same limit of max_transfer
- qemu_iovec_memset is OK, as bytes+qiov_offset should not overflow
qiov->size anyway (thanks to bdrv_check_qiov_request())
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-14-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, prepare bdrv_co_do_copy_on_readv() now.
'bytes' type widening, so callers are safe. Look at the function
itself:
bytes, skip_bytes and progress become int64_t.
bdrv_round_to_clusters() is OK, cluster_bytes now may be large.
trace_bdrv_co_do_copy_on_readv() is OK
looping through cluster_bytes is still OK.
pnum is still capped to max_transfer, and to MAX_BOUNCE_BUFFER when we
are going to do COR operation. Therefor calculations in
qemu_iovec_from_buf() and bdrv_driver_preadv() should not change.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-13-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, prepare bdrv_aligned_pwritev() now and convert the dependencies:
bdrv_co_write_req_prepare() and bdrv_co_write_req_finish() to signed
type bytes.
Conversion of bdrv_co_write_req_prepare() and
bdrv_co_write_req_finish() is definitely safe, as all requests in
block/io must not overflow BDRV_MAX_LENGTH. Still add assertions.
For bdrv_aligned_pwritev() 'bytes' type is widened, so callers are
safe. Let's check usage of the parameter inside the function.
Passing to bdrv_co_write_req_prepare() and bdrv_co_write_req_finish()
is OK.
Passing to qemu_iovec_* is OK after new assertion. All other callees
are already updated to int64_t.
Checking alignment is not changed, offset + bytes and qiov_offset +
bytes calculations are safe (thanks to new assertions).
max_transfer is kept to be int for now. It has a default of INT_MAX
here, and some drivers may rely on it. It's to be refactored later.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-12-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, prepare bdrv_co_do_pwrite_zeroes() now.
Callers are safe, as converting int to int64_t is safe. Concentrate on
'bytes' usage in the function (thx to Eric Blake):
compute 'int tail' via % 'int alignment' - safe
fragmentation loop 'int num' - still fragments with a cap on
max_transfer
use of 'num' within the loop
MIN(bytes, max_transfer) as well as %alignment - still works, so
calculations in if (head) {} are safe
clamp size by 'int max_write_zeroes' - safe
drv->bdrv_co_pwrite_zeroes(int) - safe because of clamping
clamp size by 'int max_transfer' - safe
buf allocation is still clamped to max_transfer
qemu_iovec_init_buf(size_t) - safe because of clamping
bdrv_driver_pwritev(uint64_t) - safe
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-11-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver wrappers parameters which are already 64bit to
signed type.
Requests in block/io.c must never exceed BDRV_MAX_LENGTH (which is less
than INT64_MAX), which makes the conversion to signed 64bit type safe.
Add corresponding assertions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-10-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
All requests in block/io must not overflow BDRV_MAX_LENGTH, all
external users of BdrvTrackedRequest already have corresponding
assertions, so we are safe. Add some assertions still.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-9-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Operations with qiov add more restrictions on bytes, let's cover it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-8-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Make bdrv_pad_request() honest: return error if
qemu_iovec_init_extended() failed.
Update also bdrv_padding_destroy() to clean the structure for safety.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-6-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Prepare for the following patch when bdrv_pad_request() will be able to
fail. Update the comments.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
Calculation of sum may theoretically overflow, so use 64bit type and
add some good assertions.
Use int64_t constantly.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: tweak assertion order]
Signed-off-by: Eric Blake <eblake@redhat.com>
Actually, we can't extend the io vector in all cases. Handle possible
MAX_IOV and size_t overflows.
For now add assertion to callers (actually they rely on success anyway)
and fix them in the following patch.
Add also some additional good assertions to qemu_iovec_init_slice()
while being here.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
It's better to pass &error_abort than just assert that result is 0: on
crash, we'll immediately see the reason in the backtrace.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix iotest 206 fallout]
Signed-off-by: Eric Blake <eblake@redhat.com>
Add the new member supported_read_flags to the BlockDriverState
structure. It will control the flags set for copy-on-read operations.
Make the block generic layer evaluate supported read flags before they
go to a block driver.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[vsementsov: use assert instead of abort]
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201216061703.70908-8-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add flag to make serialising request no wait: if there are conflicting
requests, just return error immediately. It's will be used in upcoming
preallocate filter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201021145859.11201-7-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We'll need a separate function, which will only "mark" request
serialising with specified align but not wait for conflicting
requests. So, it will be like old bdrv_mark_request_serialising(),
before merging bdrv_wait_serialising_requests_locked() into it.
To reduce the possible mess, let's do the following:
Public function that does both marking and waiting will be called
bdrv_make_request_serialising, and private function which will only
"mark" will be called tracked_request_set_serialising().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201021145859.11201-6-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
