During build the kernel-doc script complains about the following issue:
src/docs/../include/exec/memory.h:1741: warning: Function parameter or member 'n' not described in 'memory_region_unmap_iommu_notifier_range'
src/docs/../include/exec/memory.h:1741: warning: Excess function parameter 'notifier' description in 'memory_region_unmap_iommu_notifier_range'
Settle on "notifier" for consistency with other memory functions.
Fixes: 7caebbf9ea
("memory: introduce memory_region_unmap_iommu_notifier_range()")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230315072552.47117-1-shentey@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Don't disable all big-endian tests, instead check whether $(CORE) is
supported by the configured $(QEMU) and enable tests if it is.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Linker script for xtensa tests must be preprocessed for a specific
target, remove it as a part of make clean.
Fixes: be5cac175a ("tests/tcg/xtensa: enable system tests")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Commit 85c4bf8aa6 ("vl: Unlink absolute PID file path") introduced a
critical error when the PID file path cannot be resolved. Before this
commit, it was possible to invoke QEMU when the PID file was a file
created with mkstemp that was already unlinked at the time of the
invocation. There might be other similar scenarios.
It should not be a critical error when the PID file unlink notifier
can't be registered, because the path can't be resolved. If the file
is already gone from QEMU's perspective, silently ignore the error.
Otherwise, only print a warning.
Fixes: 85c4bf8aa6 ("vl: Unlink absolute PID file path")
Reported-by: Dominik Csapak <d.csapak@proxmox.com>
Suggested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221031094716.39786-1-f.ebner@proxmox.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A Linux guest will perform IRQ migration after the IRQ has happened,
updating the RTE to point to the new destination CPU and then unmasking
the interrupt.
However, when the guest updates the RTE, ioapic_mem_write() calls
ioapic_service(), which redelivers the pending level interrupt via
kvm_set_irq(), *before* calling ioapic_update_kvm_routes() which sets
the new target CPU.
Thus, the IRQ which is supposed to go to the new target CPU is instead
misdelivered to the previous target. An example where the guest kernel
is attempting to migrate from CPU#2 to CPU#0 shows:
xenstore_read tx 0 path control/platform-feature-xs_reset_watches
ioapic_set_irq vector: 11 level: 1
ioapic_set_remote_irr set remote irr for pin 11
ioapic_service: trigger KVM IRQ 11
[ 0.523627] The affinity mask was 0-3 and the handler is on 2
ioapic_mem_write ioapic mem write addr 0x0 regsel: 0x27 size 0x4 val 0x26
ioapic_update_kvm_routes: update KVM route for IRQ 11: fee02000 8021
ioapic_mem_write ioapic mem write addr 0x10 regsel: 0x26 size 0x4 val 0x18021
xenstore_reset_watches
ioapic_set_irq vector: 11 level: 1
ioapic_mem_read ioapic mem read addr 0x10 regsel: 0x26 size 0x4 retval 0x1c021
[ 0.524569] ioapic_ack_level IRQ 11 moveit = 1
ioapic_eoi_broadcast EOI broadcast for vector 33
ioapic_clear_remote_irr clear remote irr for pin 11 vector 33
ioapic_mem_write ioapic mem write addr 0x0 regsel: 0x26 size 0x4 val 0x26
ioapic_mem_read ioapic mem read addr 0x10 regsel: 0x26 size 0x4 retval 0x18021
[ 0.525235] ioapic_finish_move IRQ 11 calls irq_move_masked_irq()
[ 0.526147] irq_do_set_affinity for IRQ 11, 0
[ 0.526732] ioapic_set_affinity for IRQ 11, 0
[ 0.527330] ioapic_setup_msg_from_msi for IRQ11 target 0
ioapic_mem_write ioapic mem write addr 0x0 regsel: 0x26 size 0x4 val 0x27
ioapic_mem_write ioapic mem write addr 0x10 regsel: 0x27 size 0x4 val 0x0
ioapic_mem_write ioapic mem write addr 0x0 regsel: 0x27 size 0x4 val 0x26
ioapic_mem_write ioapic mem write addr 0x10 regsel: 0x26 size 0x4 val 0x18021
[ 0.527623] ioapic_set_affinity returns 0
[ 0.527623] ioapic_finish_move IRQ 11 calls unmask_ioapic_irq()
ioapic_mem_write ioapic mem write addr 0x0 regsel: 0x26 size 0x4 val 0x26
ioapic_mem_write ioapic mem write addr 0x10 regsel: 0x26 size 0x4 val 0x8021
ioapic_set_remote_irr set remote irr for pin 11
ioapic_service: trigger KVM IRQ 11
ioapic_update_kvm_routes: update KVM route for IRQ 11: fee00000 8021
[ 0.529571] The affinity mask was 0 and the handler is on 2
[ xenstore_watch path memory/target token FFFFFFFF92847D40
There are no other code paths in ioapic_mem_write() which need the KVM
IRQ routing table to be updated, so just shift the call from the end
of the function to happen right before the call to ioapic_service()
and thus deliver the re-enabled IRQ to the right place.
Alternative fixes might have been just to remove the part in
ioapic_service() which delivers the IRQ via kvm_set_irq() because
surely delivering as MSI ought to work just fine anyway in all cases?
That code lacks a comment justifying its existence.
Or maybe in the specific case shown in the above log, it would have
sufficed for ioapic_update_kvm_routes() to update the route *even*
when the IRQ is masked. It's not like it's actually going to get
triggered unless QEMU deliberately does so, anyway? But that only
works because the target CPU happens to be in the high word of the
RTE; if something in the *low* word (vector, perhaps) was changed
at the same time as the unmask, we'd still trigger with stale data.
Fixes: 15eafc2e60 "kvm: x86: add support for KVM_CAP_SPLIT_IRQCHIP"
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230308111952.2728440-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Upstream commit ddf0fd9ae1 "hw/xen: Support HVM_PARAM_CALLBACK_TYPE_GSI callback"
added kvm_xen_maybe_deassert_callback usage to target/i386/kvm/kvm.c file without
conditional preprocessing check. This breaks any build not using CONFIG_XEN_EMU.
Protect call by conditional preprocessing to allow build without CONFIG_XEN_EMU.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20230308130557.2420-1-mrezanin@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben is no longer with intel. He told me he expected to get back to
CXL, but it's not happening as quickly as he'd like, and that it's
best to remove him as maintainer. So let's do that.
Thank you for serving as maintainer, Ben!
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230220212437.1462314-1-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This leakage can be seen through test-io-channel-tls:
$ ../configure --target-list=aarch64-softmmu --enable-sanitizers
$ make ./tests/unit/test-io-channel-tls
$ ./tests/unit/test-io-channel-tls
Indirect leak of 104 byte(s) in 1 object(s) allocated from:
#0 0x7f81d1725808 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cc:144
#1 0x7f81d135ae98 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x57e98)
#2 0x55616c5d4c1b in object_new_with_propv ../qom/object.c:795
#3 0x55616c5d4a83 in object_new_with_props ../qom/object.c:768
#4 0x55616c5c5415 in test_tls_creds_create ../tests/unit/test-io-channel-tls.c:70
#5 0x55616c5c5a6b in test_io_channel_tls ../tests/unit/test-io-channel-tls.c:158
#6 0x7f81d137d58d (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x7a58d)
Indirect leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7f81d1725a06 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cc:153
#1 0x7f81d1472a20 in gnutls_dh_params_init (/lib/x86_64-linux-gnu/libgnutls.so.30+0x46a20)
#2 0x55616c6485ff in qcrypto_tls_creds_x509_load ../crypto/tlscredsx509.c:634
#3 0x55616c648ba2 in qcrypto_tls_creds_x509_complete ../crypto/tlscredsx509.c:694
#4 0x55616c5e1fea in user_creatable_complete ../qom/object_interfaces.c:28
#5 0x55616c5d4c8c in object_new_with_propv ../qom/object.c:807
#6 0x55616c5d4a83 in object_new_with_props ../qom/object.c:768
#7 0x55616c5c5415 in test_tls_creds_create ../tests/unit/test-io-channel-tls.c:70
#8 0x55616c5c5a6b in test_io_channel_tls ../tests/unit/test-io-channel-tls.c:158
#9 0x7f81d137d58d (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x7a58d)
...
SUMMARY: AddressSanitizer: 49143 byte(s) leaked in 184 allocation(s).
The docs for `g_source_add_child_source(source, child_source)` says
"source will hold a reference on child_source while child_source is
attached to it." Therefore, we should unreference the child source at
`qio_channel_tls_read_watch()` after attaching it to `source`. With this
change, ./tests/unit/test-io-channel-tls shows no leakages.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The scancodes for the Lang1 and Lang2 keys (i.e. Hangeul, Hanja) are
special since they already have the 0x80 bit set which is commonly used
to indicate a key release in AT set 1. Reportedly, real hardware does
not send a key release scancode. So, skip sending a release for these
keys. This ensures that Windows behaves correctly and interprets it as a
single keypress rather than two consecutive keypresses.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To be able to use the function keys F13 to F24 these should be defined in de keycodemapdb and added to the qapi.
The keycodemapdb is updated in its own repository, this patch enables the use of those keys within qemu.
Signed-off-by: Willem van de Velde <williamvdvelde@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Fix incorrect register name in RISC-V disassembler for fmv,fabs,fneg instructions
Signed-off-by: Mikhail Tyutin <m.tyutin@yadro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <3454991f-7f64-24c3-9a36-f5fa2cc389e1@yadro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The decoding of the slli_uw currently contains decoding
error: shamt part of opcode has six bits, not five.
Fixes 3de1fb71("target/riscv: update disas.c for xnor/orn/andn and slli.uw")
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230227090228.17117-1-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We can enable EGL later for non-GBM hosts.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Allow to build & use the DBus display without 3d/GPU acceleration support.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Future patches will introduce EGL support on win32 (too late for 8.0
though). Having a common place for EGL initialization and error handling
will make it simpler.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
-display sdl,gl=es didn't actually use OpenGL ES.
Using OpenGL ES allows to use ANGLE, which works generally better than
Windows/OEM OpenGL driver.
(note: users can still bypass the QEMU choice with SDL_RENDER_DRIVER
environment variable)
(note: for some reason, specifying a driver disables batching and
breaks rendering, so enable it explicitly)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Enable SDL logging when QEMU_ENABLE_SDL_LOGGING variable is set, as
suggested by Sam Lantinga, upstream SDL maintainer.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
ANGLE fails to compile shaders otherwise.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There is no guarantee to have a current GL context here. The current
code seems to rely on the renderer using a GL backend, and to set a
current GL context. But this is not always the case, for example if the
renderer backend is DirectX.
This change is enough to fix using virgl with sdl2 on win32, on my setup.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Keeping the current cursor around is useful, not only for VNC, but for
other displays. Let's move it down, see the following patches for other
usages.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The naming is more conventional in QEMU code, and allows to simplify
some code by changing the API design, so it returns the input parameter,
instead of void.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The naming is more conventional in QEMU.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It's simply by luck that dbus-display header is built first before the
other units using it.
With sourceset, I can't find an easier way out than declaring an extra
dependency for dbus-display1 generate code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Fixes unregistration with p2p connections, since they don't have an
associated name owner.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Or else, we may randomly destroy some textures..
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These functions are no longer used.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace with tcg_constant_vec*.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_constant_i32 for the bounds.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All remaining uses are strictly read-only.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix incorrect read from rD.
Avoid adding 0 when rA == 0.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Compute all carry bits in parallel instead of a loop.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses are strictly read-only.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses are strictly read-only.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All remaining uses are strictly read-only.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
