AwSRAMCClass is larger than SysBusDeviceClass so the class size must be
advertised accordingly.
Fixes: 05def917e1 ("hw: arm: allwinner-sramc: Add SRAM Controller support for R40")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230628110905.38125-1-akihiko.odaki@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This code is only relevant when TCG is present in the build. Building
with --disable-tcg --enable-xen on an x86 host we get:
$ ../configure --target-list=x86_64-softmmu,aarch64-softmmu --disable-tcg --enable-xen
$ make -j$(nproc)
...
libqemu-aarch64-softmmu.fa.p/target_arm_gdbstub.c.o: in function `m_sysreg_ptr':
../target/arm/gdbstub.c:358: undefined reference to `arm_v7m_get_sp_ptr'
../target/arm/gdbstub.c:361: undefined reference to `arm_v7m_get_sp_ptr'
libqemu-aarch64-softmmu.fa.p/target_arm_gdbstub.c.o: in function `arm_gdb_get_m_systemreg':
../target/arm/gdbstub.c:405: undefined reference to `arm_v7m_mrs_control'
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20230628164821.16771-1-farosas@suse.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Following are done to fix the coverity issues:
1. Change read_data to fix the CID 1512899: Out-of-bounds access (OVERRUN)
2. Fix match_rx_tx_data to fix CID 1512900: Logically dead code (DEADCODE)
3. Replace rand() in generate_random_data() with g_rand_int()
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Message-id: 20230628202758.16398-1-vikram.garhwal@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unlike architectures with precise self-modifying code semantics
(e.g. x86) ARM processors do not maintain coherency for instruction
execution and memory, requiring an instruction synchronization
barrier on every core that will execute the new code, and on many
models also the explicit use of cache management instructions.
While this is required to make JITs work on actual hardware, QEMU
has gotten away with not handling this since it does not emulate
caches, and unconditionally invalidates code whenever the softmmu
or the user-mode page protection logic detects that code has been
modified.
Unfortunately the latter does not work in the face of dual-mapped
code (a common W^X workaround), where one page is executable and
the other is writable: user-mode has no way to connect one with the
other as that is only known to the kernel and the emulated
application.
This commit works around the issue by telling software that
instruction cache invalidation is required by clearing the
CPR_EL0.DIC flag (regardless of whether the emulated processor
needs it), and then invalidating code in IC IVAU instructions.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1034
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: John Högberg <john.hogberg@ericsson.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 168778890374.24232.3402138851538068785-1@git.sr.ht
[PMM: removed unnecessary AArch64 feature check; moved
"clear CTR_EL1.DIC" code up a bit so it's not in the middle
of the vfp/neon related tests]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the outer product set of insns, which take an entire matrix
tile as output, the argument is not a combined tile+column.
Therefore using get_tile_rowcol was incorrect, as we extracted
the tile number from itself.
The test case relies only on assembler support for SME, since
no release of GCC recognizes -march=armv9-a+sme yet.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1620
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230622151201.1578522-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: dropped now-unneeded changes to sysregs CFLAGS]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Always print each matrix row whole, one per line, so that we
get the entire matrix in the proper shape.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230622151201.1578522-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow the line length to extend to 548 columns. While annoyingly wide,
it's still less confusing than the continuations we print. Also, the
default VL used by Linux (and max for A64FX) uses only 140 columns.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230622151201.1578522-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some assemblers will complain about attempts to access
id_aa64zfr0_el1 and id_aa64smfr0_el1 by name if the test
binary isn't built for the right processor type:
/tmp/ccASXpLo.s:782: Error: selected processor does not support system register name 'id_aa64zfr0_el1'
/tmp/ccASXpLo.s:829: Error: selected processor does not support system register name 'id_aa64smfr0_el1'
However, these registers are in the ID space and are guaranteed to
read-as-zero on older CPUs, so the access is both safe and sensible.
Switch to using the S syntax, as we already do for ID_AA64ISAR2_EL1
and ID_AA64MMFR2_EL1. This allows us to drop the HAS_ARMV9_SME check
and the makefile machinery to adjust the CFLAGS for this test, so we
don't rely on having a sufficiently new compiler to be able to check
these registers.
This means we're actually testing the SME ID register: no released
GCC yet recognizes -march=armv9-a+sme, so that was always skipped.
It also avoids a future problem if we try to switch the "do we have
SME support in the toolchain" check from "in the compiler" to "in the
assembler" (at which point we would otherwise run into the above
errors).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change status of 9p from 'Odd Fixes' to 'Maintained', as this better
reflects current situation. I already take care of 9p patches for a
while, which included new features as well.
Based-on: <E1qDkmw-0007M1-8f@lizzy.crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <E1qGKgV-0003Hj-01@lizzy.crudebyte.com>
As recent CVE-2023-2861 (fixed by f6b0de53fb) once again showed, the 9p
'proxy' fs driver is in bad shape. Using the 'proxy' backend was already
discouraged for safety reasons before and we recommended to use the
'local' backend (preferably in conjunction with its 'mapped' security
model) instead, but now it is time to officially deprecate the 'proxy'
backend.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1qDkmw-0007M1-8f@lizzy.crudebyte.com>
When QEMU is built with --enable-modules, the module_block.py script
parses block/*.c to find block drivers that are built as modules. The
script generates a table of block drivers called block_driver_modules[].
This table is used for block driver module loading.
The blkio.c driver uses macros to define its BlockDriver structs. This
was done to avoid code duplication but the module_block.py script is
unable to parse the macro. The result is that libblkio-based block
drivers can be built as modules but will not be found at runtime.
One fix is to make the module_block.py script or build system fancier so
it can parse C macros (e.g. by parsing the preprocessed source code). I
chose not to do this because it raises the complexity of the build,
making future issues harder to debug.
Keep things simple: use the macro to avoid duplicating BlockDriver
function pointers but define .format_name and .protocol_name manually
for each BlockDriver. This way the module_block.py is able to parse the
code.
Also get rid of the block driver name macros (e.g. DRIVER_IO_URING)
because module_block.py cannot parse them either.
Fixes: fd66dbd424 ("blkio: add libblkio block driver")
Reported-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230704123436.187761-1-stefanha@redhat.com
Cc: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The current sbsa-ref cannot use EHCI controller which is only
able to do 32-bit DMA, since sbsa-ref doesn't have RAM below 4GB.
Hence, this uses XHCI to provide a usb controller with 64-bit
DMA capablity instead of EHCI.
We bump the platform version to 0.3 with this change. Although the
hardware at the USB controller address changes, the firmware and
Linux can both cope with this -- on an older non-XHCI-aware
firmware/kernel setup the probe routine simply fails and the guest
proceeds without any USB. (This isn't a loss of functionality,
because the old USB controller never worked in the first place.) So
we can call this a backwards-compatible change and only bump the
minor version.
Signed-off-by: Yuquan Wang <wangyuquan1236@phytium.com.cn>
Message-id: 20230621103847.447508-2-wangyuquan1236@phytium.com.cn
[PMM: tweaked commit message; add line to docs about what
changes in platform version 0.3]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some registers whose 'cooked' writefns induce TLB maintenance do
not have raw_writefn ops defined. If only the writefn ops is set
(ie. no raw_writefn is provided), it is assumed the cooked also
work as the raw one. For those registers it is not obvious the
tlb_flush works on KVM mode so better/safer setting the raw write.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- clean up gitlab artefact handling
- ensure gitlab publishes artefacts with coverage data
- reduce testing scope for coverage job
- mention CI pipeline in developer docs
- add ability to add plugin args to check-tcg
- fix some memory leaks and UB in tests
- suppress xcb leaks from fuzzing output
- add a test-fuzz to mirror the CI run
- allow lci-refresh to be run in $SRC
- update lcitool to latest version
- add qemu-minimal package set with gcc-native
- convert riscv64-cross to lcitool
- update sbsa-ref tests
- don't include arm_casq_ptw emulation unless TCG
- convert plugins to use g_memdup2
- ensure plugins instrument SVE helper mem access
- improve documentation of QOM/QDEV
- make gdbstub send stop responses when it should
- report user-mode pid in gdbstub
- add support for info proc mappings in gdbstub
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmSiuH4ACgkQ+9DbCVqe
KkRt0Qf+N0oD/VuEcRSxK1bWlLtf5nxQpPKKzkRItPc5jqJnLWa/gh21sfQgs5Uq
BczAT+JfgTnMozbq0mjvQ+uAGI4MHzBs+UAn60+ZcXfk2inyk77XKBEoHOFuK1ry
rgQ4+p21/hcZedDiDLnLSfbGfUU0KkM/pbAegOz7HO0EQDV0CSXqeAW3WAuM1lne
+YmXkKwoFI1V8HvslzCT12GFiaUfmSSBtASqWcf67Ief97K24+rpkAVM7JChLm5X
fC1MOFNuNYV+jO+9U3KIs15P1WH12oMcpNUY+KqQ5ZWovBg83yOLtKY1o3f6Z2Y+
iQgFJr6F8ZVBdKNJtqVi8DkbiFfbsA==
=Ho/h
-----END PGP SIGNATURE-----
Merge tag 'pull-maintainer-ominbus-030723-1' of https://gitlab.com/stsquad/qemu into staging
maintainer updates: testing, fuzz, plugins, docs, gdbstub
- clean up gitlab artefact handling
- ensure gitlab publishes artefacts with coverage data
- reduce testing scope for coverage job
- mention CI pipeline in developer docs
- add ability to add plugin args to check-tcg
- fix some memory leaks and UB in tests
- suppress xcb leaks from fuzzing output
- add a test-fuzz to mirror the CI run
- allow lci-refresh to be run in $SRC
- update lcitool to latest version
- add qemu-minimal package set with gcc-native
- convert riscv64-cross to lcitool
- update sbsa-ref tests
- don't include arm_casq_ptw emulation unless TCG
- convert plugins to use g_memdup2
- ensure plugins instrument SVE helper mem access
- improve documentation of QOM/QDEV
- make gdbstub send stop responses when it should
- report user-mode pid in gdbstub
- add support for info proc mappings in gdbstub
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmSiuH4ACgkQ+9DbCVqe
# KkRt0Qf+N0oD/VuEcRSxK1bWlLtf5nxQpPKKzkRItPc5jqJnLWa/gh21sfQgs5Uq
# BczAT+JfgTnMozbq0mjvQ+uAGI4MHzBs+UAn60+ZcXfk2inyk77XKBEoHOFuK1ry
# rgQ4+p21/hcZedDiDLnLSfbGfUU0KkM/pbAegOz7HO0EQDV0CSXqeAW3WAuM1lne
# +YmXkKwoFI1V8HvslzCT12GFiaUfmSSBtASqWcf67Ief97K24+rpkAVM7JChLm5X
# fC1MOFNuNYV+jO+9U3KIs15P1WH12oMcpNUY+KqQ5ZWovBg83yOLtKY1o3f6Z2Y+
# iQgFJr6F8ZVBdKNJtqVi8DkbiFfbsA==
# =Ho/h
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 03 Jul 2023 02:01:02 PM CEST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-maintainer-ominbus-030723-1' of https://gitlab.com/stsquad/qemu: (38 commits)
tests/tcg: Add a test for info proc mappings
docs: Document security implications of debugging
gdbstub: Add support for info proc mappings
gdbstub: Report the actual qemu-user pid
gdbstub: Expose gdb_get_process() and gdb_get_first_cpu_in_process()
linux-user: Emulate /proc/self/smaps
linux-user: Add "safe" parameter to do_guest_openat()
linux-user: Expose do_guest_openat() and do_guest_readlink()
gdbstub: clean-up vcont handling to avoid goto
gdbstub: Permit reverse step/break to provide stop response
gdbstub: lightly refactor connection to avoid snprintf
docs/devel: introduce some key concepts for QOM development
docs/devel: split qom-api reference into new file
docs/devel/qom.rst: Correct code style
include/hw/qdev-core: fixup kerneldoc annotations
include/migration: mark vmstate_register() as a legacy function
docs/devel: add some front matter to the devel index
plugins: update lockstep to use g_memdup2
plugins: fix memory leak while parsing options
plugins: force slow path when plugins instrument memory ops
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230621203627.1808446-9-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-39-alex.bennee@linaro.org>
Now that the GDB stub explicitly implements reading host files (note
that it was already possible by changing the emulated code to open and
read those files), concerns may arise that it undermines security.
Document the status quo, which is that the users are already
responsible for securing the GDB connection themselves.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621203627.1808446-8-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-38-alex.bennee@linaro.org>
Currently the GDB's generate-core-file command doesn't work well with
qemu-user: the resulting dumps are huge [1] and at the same time
incomplete (argv and envp are missing). The reason is that GDB has no
access to proc mappings and therefore has to fall back to using
heuristics for discovering them. This is, in turn, because qemu-user
does not implement the Host I/O feature of the GDB Remote Serial
Protocol.
Implement vFile:{open,close,pread,readlink} and also
qXfer:exec-file:read+. With that, generate-core-file begins to work on
aarch64 and s390x.
[1] https://sourceware.org/pipermail/gdb-patches/2023-May/199432.html
Co-developed-by: Dominik 'Disconnect3d' Czarnota <dominik.b.czarnota@gmail.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230621203627.1808446-7-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-37-alex.bennee@linaro.org>
Currently qemu-user reports pid 1 to GDB. Resolve the TODO and report
the actual PID. Using getpid() relies on the assumption that there is
only one GDBProcess. Add an assertion to make sure that future changes
don't break it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230621203627.1808446-6-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-36-alex.bennee@linaro.org>
These functions will be needed by user-target.c in order to retrieve
the name of the executable.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230621203627.1808446-5-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-35-alex.bennee@linaro.org>
/proc/self/smaps is an extension of /proc/self/maps: it provides the
same lines, plus additional information about each range.
GDB uses /proc/self/smaps when available, which means that
generate-core-file tries it first before falling back to
/proc/self/maps. This, in turn, causes it to dump the host mappings,
since /proc/self/smaps is not emulated and is just passed through.
Fix by emulating /proc/self/smaps. Provide true values only for
Size, KernelPageSize, MMUPageSize and VmFlags. Leave all other values
at 0, which is a valid conservative estimate.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621203627.1808446-4-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-34-alex.bennee@linaro.org>
gdbstub cannot meaningfully handle QEMU_ERESTARTSYS, and it doesn't
need to. Add a parameter to do_guest_openat() that makes it use
openat() instead of safe_openat(), so that it becomes usable from
gdbstub.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621203627.1808446-3-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-33-alex.bennee@linaro.org>
These functions will be required by the GDB stub in order to provide
the guest view of /proc to GDB.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621203627.1808446-2-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-32-alex.bennee@linaro.org>
We can handle all the error exit cases by using g_autofree() for the
one thing that needs cleaning up on the exit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-31-alex.bennee@linaro.org>
The final part of the reverse step and break handling is to bring
the machine back to a debug stop state. gdb expects a response.
A gdb 'rsi' command hangs forever because the gdbstub filters out
the response (also observable with reverse_debugging.py avocado
tests).
Fix by setting allow_stop_reply for the gdb backward packets.
Fixes: 758370052f ("gdbstub: only send stop-reply packets when allowed to")
Cc: qemu-stable@nongnu.org
Cc: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Message-Id: <20230623035304.279833-1-npiggin@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-30-alex.bennee@linaro.org>
This may be a bit too much to avoid an snprintf and the slightly dodgy
assign to a const variable. But hopefully not.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-29-alex.bennee@linaro.org>
Using QOM correctly is increasingly important to maintaining a modern
code base. However the current documentation skips some important
concepts before launching into a simple example. Lets:
- at least mention properties
- mention TYPE_OBJECT and TYPE_DEVICE
- talk about why we have realize/unrealize
- mention the QOM tree
- lightly re-arrange the order we mention things
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-28-alex.bennee@linaro.org>
Lets try and keep the overview of the sub-system digestible by
splitting the core API stuff into a separate file. As QOM and QDEV
work together we should also try and enumerate the qdev_ functions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-27-alex.bennee@linaro.org>
Per commit 067109a11c ("docs/devel: mention the spacing requirement
for QOM"):
For a storage structure the first declaration should always be
called “parent_obj” and for a class structure the first member
should always be called “parent_class”
Adapt the QOM rST document accordingly.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230622101717.70468-1-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-26-alex.bennee@linaro.org>
Fix up the kerneldoc markup and start documenting the various fields
in QDEV related structures. This involved:
- moving overall description to a DOC: comment at top
- fixing various markup issues for types and structures
- adding missing Return: statements
- adding some typedefs to hide QLIST macros in headers
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-25-alex.bennee@linaro.org>
Mention that QOM-ified devices already have support for registering
the description.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-24-alex.bennee@linaro.org>
Give an overview of the most useful bits of the devel documentation to
read depending on what the developer wants to do.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-23-alex.bennee@linaro.org>
The old g_memdup is deprecated, use the replacement.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-22-alex.bennee@linaro.org>
It was hard to track down this leak as it was an internal allocation
by glib and the backtraces did not give much away. The autofree was
freeing the allocation with g_free() but not taking care of the
individual strings. They should have been freed with g_strfreev()
instead.
Searching the glib source code for the correct string free function
led to:
G_DEFINE_AUTO_CLEANUP_FREE_FUNC(GStrv, g_strfreev, NULL)
and indeed if you read to the bottom of the documentation page you
will find:
typedef gchar** GStrv;
A typedef alias for gchar**. This is mostly useful when used together with g_auto().
So fix up all the g_autofree g_strsplit case that smugly thought they
had de-allocation covered.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-21-alex.bennee@linaro.org>
The lack of SVE memory instrumentation has been an omission in plugin
handling since it was introduced. Fortunately we can utilise the
probe_* functions to force all all memory access to follow the slow
path. We do this by checking the access type and presence of plugin
memory callbacks and if set return the TLB_MMIO flag.
We have to jump through a few hoops in user mode to re-use the flag
but it was the desired effect:
./qemu-system-aarch64 -display none -serial mon:stdio \
-M virt -cpu max -semihosting-config enable=on \
-kernel ./tests/tcg/aarch64-softmmu/memory-sve \
-plugin ./contrib/plugins/libexeclog.so,ifilter=st1w,afilter=0x40001808 -d plugin
gives (disas doesn't currently understand st1w):
0, 0x40001808, 0xe54342a0, ".byte 0xa0, 0x42, 0x43, 0xe5", store, 0x40213010, RAM, store, 0x40213014, RAM, store, 0x40213018, RAM
And for user-mode:
./qemu-aarch64 \
-plugin contrib/plugins/libexeclog.so,afilter=0x4007c0 \
-d plugin \
./tests/tcg/aarch64-linux-user/sha512-sve
gives:
1..10
ok 1 - do_test(&tests[i])
0, 0x4007c0, 0xa4004b80, ".byte 0x80, 0x4b, 0x00, 0xa4", load, 0x5500800370, load, 0x5500800371, load, 0x5500800372, load, 0x5500800373, load, 0x5500800374, load, 0x5500800375, load, 0x5500800376, load, 0x5500800377, load, 0x5500800378, load, 0x5500800379, load, 0x550080037a, load, 0x550080037b, load, 0x550080037c, load, 0x550080037d, load, 0x550080037e, load, 0x550080037f, load, 0x5500800380, load, 0x5500800381, load, 0x5500800382, load, 0x5500800383, load, 0x5500800384, load, 0x5500800385, load, 0x5500800386, lo
ad, 0x5500800387, load, 0x5500800388, load, 0x5500800389, load, 0x550080038a, load, 0x550080038b, load, 0x550080038c, load, 0x550080038d, load, 0x550080038e, load, 0x550080038f, load, 0x5500800390, load, 0x5500800391, load, 0x5500800392, load, 0x5500800393, load, 0x5500800394, load, 0x5500800395, load, 0x5500800396, load, 0x5500800397, load, 0x5500800398, load, 0x5500800399, load, 0x550080039a, load, 0x550080039b, load, 0x550080039c, load, 0x550080039d, load, 0x550080039e, load, 0x550080039f, load, 0x55008003a0, load, 0x55008003a1, load, 0x55008003a2, load, 0x55008003a3, load, 0x55008003a4, load, 0x55008003a5, load, 0x55008003a6, load, 0x55008003a7, load, 0x55008003a8, load, 0x55008003a9, load, 0x55008003aa, load, 0x55008003ab, load, 0x55008003ac, load, 0x55008003ad, load, 0x55008003ae, load, 0x55008003af
(4007c0 is the ld1b in the sha512-sve)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Robert Henry <robhenry@microsoft.com>
Cc: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-20-alex.bennee@linaro.org>
The ptw code is accessed by non-TCG code (specifically arm_pamax and
arm_cpu_get_phys_page_attrs_debug) but most of it is really only for
TCG emulation. Seeing as we already assert for a non TARGET_AARCH64
build lets extend the test rather than further messing with the ifdef
ladder.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-19-alex.bennee@linaro.org>
The test_arm_bpim2u_gmac test sometimes fails (ca. 1 out of 20 runs
here) since the disk shows up as /dev/mmcblk1 instead of /dev/mmcblk0
in some runs. No matter of the name in /dev, the major:minor encoding
seems always to be the same, so we can fix this issue by using the
correct major:minor hex number in the "root=" parameter instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230630161604.446394-1-thuth@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-18-alex.bennee@linaro.org>
Update prebuilt firmware images to have TF-A with FEAT_FGT support
enabled. This allowed us to enable test for "max" cpu in sbsa-ref
machine.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-Id: <20230530152240.79160-1-marcin.juszkiewicz@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-17-alex.bennee@linaro.org>
We still need to base this on Debian Sid until riscv64 is promoted to
a release architecture (or another distro provides a full cross
compile target). We use the new qemu-minimal project description to
avoid bringing in all the extra dependencies because every extra
package is another chance for sid to fail.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-16-alex.bennee@linaro.org>
This is a very bare bones set of dependencies for a minimal build of
QEMU. This will be useful for minimal cross-compile sanity check based
on things like Debian Sid where stuff isn't always in sync.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-15-alex.bennee@linaro.org>
We need a native compiler to build the hexagon codegen tools. In our
current images we already have a gcc as a side effect of a broken
dependency between gcovr and lcov but this will be fixed when we move
to bookworm. See
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=987818 for details.
Update the packages while we are at it.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-14-alex.bennee@linaro.org>
We need this for the riscv64 and gcc-native mappings. As the older
alpine release has been dropped from the mappings we also need to bump
the version of alpine we use.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-12-alex.bennee@linaro.org>
This is yet another make target you usually run in the top level of
the source directory.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-11-alex.bennee@linaro.org>
Running the fuzzer requires some hoop jumping and some problems only
show up in containers. This basically replicates the build-oss-fuzz
job from our CI so we can run in the same containers we use in CI.
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-10-alex.bennee@linaro.org>
An update to the clang tooling detects more issues with the code
including a memory leak from the g_string_new() allocation. Clean up
the code to avoid the allocation and use ARRAY_SIZE while we are at
it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-9-alex.bennee@linaro.org>
When updating to the latest fedora the santizer found more leaks
inside xkbmap:
FAILED: pc-bios/keymaps/ar
/builds/stsquad/qemu/build-oss-fuzz/qemu-keymap -f pc-bios/keymaps/ar -l ara
=================================================================
==3604==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 1424 byte(s) in 1 object(s) allocated from:
#0 0x56316418ebec in __interceptor_calloc (/builds/stsquad/qemu/build-oss-fuzz/qemu-keymap+0x127bec) (BuildId: a2ad9da3190962acaa010fa8f44a9269f9081e1c)
#1 0x7f60d4dc067e (/lib64/libxkbcommon.so.0+0x1c67e) (BuildId: b243a34e4e58e6a30b93771c256268b114d34b80)
#2 0x7f60d4dc2137 in xkb_keymap_new_from_names (/lib64/libxkbcommon.so.0+0x1e137) (BuildId: b243a34e4e58e6a30b93771c256268b114d34b80)
#3 0x5631641ca50f in main /builds/stsquad/qemu/build-oss-fuzz/../qemu-keymap.c:215:11
and many more. As we can't do anything about the library add a
suppression to keep the CI going with what its meant to be doing.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-8-alex.bennee@linaro.org>
We can return XKB_MOD_INVALID for AltGr which rightly gets flagged by
sanitisers as an overly wide shift attempt. Properly check the return
type and leave the bitmap as zero in that case. Tested output before
and after is unchanged with the gb and ara keymaps.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-7-alex.bennee@linaro.org>
We recently missed a regression that should have been picked up by
check-tcg. This was because the libmem plugin is effectively a NOP if
the user doesn't specify the type to use.
Rather than changing the default behaviour add an additional expansion
so we can take this into account in future.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-6-alex.bennee@linaro.org>
When new dependencies and packages are added to containers, its important to
run CI container generation pipelines on gitlab to make sure that there are no
obvious conflicts between packages that are being added and those that are
already present. Running CI container pipelines will make sure that there are
no such breakages before we commit the change updating the containers. Add a
line in the documentation reminding developers to run the pipeline before
submitting the change. It will also ease the life of the maintainers.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230506072012.10350-1-anisinha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-5-alex.bennee@linaro.org>
