This function sends out the OPENED event to backends that
have drive the chardevs. The 'reset' is now a historical
artifact and we can now just call the function for what it
is.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The initial_reset sent to chardevs doesn't do much other than setting
a bool to true. Char devices are interested in the open event and
that gets sent whenever the device is opened.
Moreover, the reset logic breaks as and when qemu's bh scheduling
changes.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
chardevs have a 'can_read' function via which backends specify
the amount of data they can receive. When can_read returns > 0,
apps can start sending data. However, each chardev driver here
allows a max. of 1k bytes inspite of the backend being able to
receive more.
The best we can do here is to allocate s->max_size bytes from
the heap on each call (which is the number returned by the
backend from the can_read call).
This is an intermediate step to bump up the bytes written in
each call to 4k.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Allow any speed value which is defined for Linux
(and possibly other systems).
* Compare int values instead of double values.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Looks like these are just artifacts of vl.c being split up.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If I am using vga and serial which is stdio and hit C-c on
serial console, qemu terminates. That is annoying for me.
So make it configurable whether signal is generated when C-c is hit.
Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The OPENED event gets sent also when qemu resets its state initially.
The consumers of the event aren't interested in receiving this event
on reset.
Patchworks-ID: 35288
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The char event RESET is emitted when a char device is opened.
Give it a better name.
Patchworks-ID: 35287
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
At init, qemu_chr_reset is always called with initial_reset_issued set to 1.
So checking for it to be set is not necessary.
Patchworks-ID: 35286
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Problem: Our file sys-queue.h is a copy of the BSD file, but there are
some additions and it's not entirely compatible. Because of that, there have
been conflicts with system headers on BSD systems. Some hacks have been
introduced in the commits 15cc923584,
f40d753718,
96555a96d7 and
3990d09adf but the fixes were fragile.
Solution: Avoid the conflict entirely by renaming the functions and the
file. Revert the previous hacks.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Now that monitor stopped using focus we can make it internal
to the mux driver.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
make the mux driver send mux_in and mux_out events when switching
focus while hooking up more handlers.
stop using CharDriverState->focus in monitor.c, track state using
the mux events instead. This also removes the implicit assumtion
that a muxed monitor allways has mux channel 0.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Lets put -chardev into use now. With this patch applied chardev:name is
accepted as chardev specification everywhere, i.e. now you can:
-chardev stdio,id=ttyS0
-serial chardev:ttyS0
which does the same as '-serial stdio".
Muxing can be done this way:
-chardev stdio,id=mux,mux=on
-serial chardev:mux
-monitor chardev:mux
You can mux more than two streams.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
While being at it: create a new inet_dgram_opts() function for udp setup,
so udp can handle IPv6 now.
new cmd line syntax:
-chardev udp,id=name,host=remotehost,port=remoteport,\
localaddr=bindaddr,localport=bindport
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
new cmd line syntax: you can add mux=1 to any chardev to enable muxing,
then attach it multiple times, like this:
-chardev pty,name=mux,mux=on
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
new cmd line syntax:
unix socket:
-chardev socket,id=name,path=/path/to/socket
tcp socket:
-chardev socket,id=name,host=hostaddr|ipaddr,port=portnr
server and nowait options work as usual. Alternatively you can use
server=[on|off] + wait=[on|off] syntax.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
start switching chardevs to QemuOpts. This patch adds the
infrastructure and converts the null device.
The patch brings two new functions:
qemu_chr_open_opts()
same as qemu_chr_open(), but uses QemuOpts instead of a
option char string.
qemu_chr_parse_compat()
accepts a traditional chardev option string, returns the
corresponding QemuOpts instance, to handle backward
compatibility.
The patch also adds a new -chardev switch which can be used to create
named+unconnected chardevs, like this:
-chardev null,id=test
This uses the new qemu_chr_open_opts. Thus with this patch alone only
the null device works. The other devices will follow ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Notify users of the char interface whenever the file / connection is
closed.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
First step cleaning up the drives handling. This one does nothing but
removing drives_table[], still it became seriously big.
drive_get_index() is gone and is replaced by drives_get() which hands
out DriveInfo pointers instead of a table index. This needs adaption in
*tons* of places all over.
The drives are now maintained as linked list.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If a file descriptor is passed via a message with SCM_RIGHTS ancillary
data on a unix socket, store the file descriptor for use in the
chr_read() handler. Close the file descriptor if it was not used.
The qemu_chr_get_msgfd() API provides access to the passed descriptor.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Split out tcp_chr_recv() out of tcp_chr_read() and implement it on
non-win32 using recvmsg(). This is needed for a subsequent patch
which implements SCM_RIGHTS support.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
So far a new timestamp was generated *after* a full line had been
printed. Fix this.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As we can have multiple multiplexed terminals, timestamp control and
tracking should better take place per MuxDriver.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Type casts removing the const attribute are bad because
they hide the fact that the argument remains const.
They also result in a compiler warning (at least with MS-C).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Work around buffer and ioctlsocket argument type signedness problems
Suppress a prototype which is unused on mingw32
Expand a macro to avoid warnings from some GCC versions
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
My previous commit, f92f8afebe, broke -vnc (spotted by Glauber Costa). This
is because it's necessary to tell when the no special display parameters have
been passed and default to SDL or VNC appropriately.
This refactors the display selection logic to be less complicated which has
the effect of fixing the regression mentioned above.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch fixes several issues around closing char devices. Affected
were pty (timer was left behind, even running), udp (no close handling
at all) and tcp (missing async IO handler cleanup). The bugs either
caused segfaults or stalled the qemu process. So far, hot-unplugging USB
serial adapters suffered from this.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6911 c046a42c-6fe2-441c-8c8c-71466251a162
This allows to create monitor terminals that do not make use of the
interactive readline back-end but rather send complete commands. The
pass-through monitor interface of the gdbstub will be an example.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6717 c046a42c-6fe2-441c-8c8c-71466251a162
Up to now, you never really knew if you already switched the console
after pressing CTRL-A C or if you mistyped it again. This patch
clarifies the situation by providing a prompt in a new line and
injecting a linebreak when switching away again. For this purpose, the
two events CHR_EVENT_MUX_IN and CHR_EVENT_MUX_OUT are introduced and
distributed on focus switches.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6716 c046a42c-6fe2-441c-8c8c-71466251a162
Currently all registered (and activate) monitor terminals work in
broadcast mode: Everyone sees what someone else types on some other
terminal and what the monitor reports back. This model is broken when
you have a management monitor terminal that is automatically operated
and some other terminal used for independent guest inspection. Such
additional terminals can be multiplexed device channels or a gdb
frontend connected to QEMU's stub.
Therefore, this patch decouples the buffers and states of all monitor
terminals, allowing the user to operate them independently. It finally
starts to use the 'mon' parameter that was introduced earlier with the
API rework. It also defines the default monitor: the first instantance
that has the MONITOR_IS_DEFAULT flag set, and that is the monitor
created via the "-monitor" command line switch (or "vc" if none is
given).
As the patch requires to rework the monitor suspension interface, it
also takes the freedom to make it "truely" suspending (so far suspending
meant suppressing the prompt, but inputs were still processed).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6715 c046a42c-6fe2-441c-8c8c-71466251a162
There is no use for the hide/show banner option, and it is applied
inconsistently anyway (or what makes the difference between
-serial mon:stdio and -nographic for the monitor?). So drop this mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6713 c046a42c-6fe2-441c-8c8c-71466251a162
Refactor the monitor API and prepare it for decoupled terminals:
term_print functions are renamed to monitor_* and all monitor services
gain a new parameter (mon) that will once refer to the monitor instance
the output is supposed to appear on. However, the argument remains
unused for now. All monitor command callbacks are also extended by a mon
parameter so that command handlers are able to pass an appropriate
reference to monitor output services.
For the case that monitor outputs so far happen without clearly
identifiable context, the global variable cur_mon is introduced that
shall once provide a pointer either to the current active monitor (while
processing commands) or to the default one. On the mid or long term,
those use case will be obsoleted so that this variable can be removed
again.
Due to the broad usage of the monitor interface, this patch mostly deals
with converting users of the monitor API. A few of them are already
extended to pass 'mon' from the command handler further down to internal
functions that invoke monitor_printf.
At this chance, monitor-related prototypes are moved from console.h to
a new monitor.h. The same is done for the readline API.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
Currently, the intermediate input buffer of mux'ed character devices
records data across all sub-devices. This has the side effect that we
easily leak data recorded over one sub-devices to another once we switch
the focus. Avoid data loss and confusion by defining exclusive buffers.
Note: In contrast to the original author's claim, the buffering concept
still breaks down when the fifo of the currently active sub-device is
full. As we cannot accept futher data from this point on without risking
to loose it, we will also miss escape sequences, just like without all
that buffering. In short: There is no reliable escape sequence handling
without infinite buffers or the risk of loosing some data.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6701 c046a42c-6fe2-441c-8c8c-71466251a162
Recent changes to the graphical console initialization broke the initial
CHR_EVENT_RESET distribution. The reset BHs generated on char device
initialization are now already consumed during machine init (ide init
... -> qemu_aio_wait -> qemu_bh_poll). Therefore, this patch moves the
initial qemu_chr_reset calls into a separate funtion which is called
after machine init.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6700 c046a42c-6fe2-441c-8c8c-71466251a162
Those new options are parsed in qemu-sockets.c. Allow them instead of
printing "Unknown option".
Signed-off-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6584 c046a42c-6fe2-441c-8c8c-71466251a162
Adds "msmouse" character device, which emulates a serial mouse.
Use it with -serial msmouse.
Signed-Off-By: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6559 c046a42c-6fe2-441c-8c8c-71466251a162
And use it for the malta emulation. Fix segfault introduced in
revision 6352.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6365 c046a42c-6fe2-441c-8c8c-71466251a162
The DisplayState refactoring changed the machine init function to create a
DisplayState for each VGA device instead of being passed an existing
DisplayState. This change is critical to enable multiple graphics device
support.
Unfortunately, the serial/parallel/console code is structured today to run
before machine init to fill out the CharDriverState table which the machine
init function uses to determine whether to create the required devices.
Since a 'vc' is a type of CharDriverState, the CharDriverState code requires
that a DisplayState exist before it runs creating a circular dependency.
To fix this, this splits the creation of the initial CharDriverState from
the initialization of the text console. We can then in a second step associate
a DisplayState with all TextConsoles. This allows us to create the
CharDriverState's first, machine init, then associate the TextConsoles with
a DisplayState.
This code screams for more cleanup.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6352 c046a42c-6fe2-441c-8c8c-71466251a162
Patch 5/7
This patch changes the graphical_console_init function to return an
allocated DisplayState instead of a QEMUConsole.
This patch contains just the graphical_console_init change and few other
modifications mainly in console.c and vl.c.
It was necessary to move the display frontends (e.g. sdl and vnc)
initialization after machine->init in vl.c.
This patch does *not* include any required changes to any device, these
changes come with the following patches.
Patch 6/7
This patch changes the QEMUMachine init functions not to take a
DisplayState as an argument because is not needed any more;
In few places the graphic hardware initialization function was called
only if DisplayState was not NULL, now they are always called.
Apart from these cases, the rest are all mechanical substitutions.
Patch 7/7
This patch updates the graphic device code to use the new
graphical_console_init function.
As for the previous patch, in few places graphical_console_init was called
only if DisplayState was not NULL, now it is always called.
Apart from these cases, the rest are all mechanical substitutions.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6344 c046a42c-6fe2-441c-8c8c-71466251a162
Remove unnecessary declaration for errno (this fixes a warning from sparse)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5833 c046a42c-6fe2-441c-8c8c-71466251a162
This switches the tcp, telnet and unix socket support for character
devices (serial/parallel, ...) to the new socket helpers. Thereby they
gain IPv6 support and also get ability to search for a free tcp port.
Syntax is the same as for vnc, using a to= option, like this:
-serial tcp:localhost:5000,to=5099,server
This will check the 5000 -> 5099 port range (inclusive) for a free tcp
port. Likewise you can get auto-allocated unix sockets by specifying an
empty path:
-serial unix:,server
qemu will create a randomly named socket in $TMPDIR then.
tcp also got new "ipv4" and "ipv6" options to make qemu try only the
specified internet protocol version.
You can use the "info chardev" command added by the first patch in this
series to figure the tcp port / unix socket actually allocated.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5697 c046a42c-6fe2-441c-8c8c-71466251a162
This patch creates a new source file qemu-sockets.c with a bunch of
helper functions to create listening and connected sockets.
New features of this code are (a) support for searching for a free
port in a given range and (b) support for IPv6.
The following patches put that code into use.
Compile fixes for Windows added by Anthony Liguori
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5695 c046a42c-6fe2-441c-8c8c-71466251a162
Fix a warning introduced in r5580 when brlapi is enabled.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5584 c046a42c-6fe2-441c-8c8c-71466251a162
Spotted by Blue Swirl.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5582 c046a42c-6fe2-441c-8c8c-71466251a162
The motivating goal behind this is to allow other tools to use the CharDriver
code. This patch is pure code motion except for the Makefile changes and the
copyright/header in qemu-char.c.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5580 c046a42c-6fe2-441c-8c8c-71466251a162
