Use device_class_set_legacy_reset() instead of opencoding an
assignment to DeviceClass::reset. This change was produced
with:
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/device-reset.cocci \
--keep-comments --smpl-spacing --in-place --dir hw
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-8-peter.maydell@linaro.org
For qemu_open_old(), osdep.h said:
> Don't introduce new usage of this function, prefer the following
> qemu_open/qemu_create that take an "Error **errp".
So replace qemu_open_old() with qemu_open().
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For qemu_open_old(), osdep.h said:
> Don't introduce new usage of this function, prefer the following
> qemu_open/qemu_create that take an "Error **errp".
So replace qemu_open_old() with qemu_open().
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This changes the way the ohci emulation handles a Transfer Descriptor
with "Buffer End" set to "Current Buffer Pointer" - 1, specifically
in the case of a zero-length packet.
The OHCI spec 4.3.1.2 Table 4-2 specifies td.cbp to be zero for a
zero-length packet. Peter Maydell tracked down commit 1328fe0c32
(hw: usb: hcd-ohci: check len and frame_number variables) where qemu
started checking this according to the spec.
What this patch does is loosen the qemu ohci implementation to allow a
zero-length packet if td.be (Buffer End) is set to td.cbp - 1, and with a
non-zero td.cbp value.
The spec is unclear whether this is valid or not -- it is not the
clearly documented way to send a zero length TD (which is CBP=BE=0),
but it isn't specifically forbidden. Actual hw seems to be ok with it.
Does any OS rely on this behavior? There have been no reports to
qemu-devel of this problem.
This is attempting to have qemu behave like actual hardware,
but this is just a minor change.
With a tiny OS[1] that boots and executes a test, the issue can be seen:
* OS that sends USB requests to a USB mass storage device
but sends td.cbp = td.be + 1
* qemu 4.2
* qemu HEAD (4e66a0854)
* Actual OHCI controller (hardware)
Command line:
qemu-system-x86_64 -m 20 \
-device pci-ohci,id=ohci \
-drive if=none,format=raw,id=d,file=testmbr.raw \
-device usb-storage,bus=ohci.0,drive=d \
--trace "usb_*" --trace "ohci_*" -D qemu.log
Results are:
qemu 4.2 | qemu HEAD | actual HW
-----------+------------+-----------
works fine | ohci_die() | works fine
Tip: if the flags "-serial pty -serial stdio" are added to the command line
the test will output USB requests like this:
Testing qemu HEAD:
> Free mem 2M ohci port2 conn FS
> setup { 80 6 0 1 0 0 8 0 }
> ED info=80000 { mps=8 en=0 d=0 } tail=c20920
> td0 c20880 nxt=c20960 f2000000 setup cbp=c20900 be=c20907
> td1 c20960 nxt=c20980 f3140000 in cbp=c20908 be=c2090f
> td2 c20980 nxt=c20920 f3080000 out cbp=c20910 be=c2090f ohci20 host err
> usb stopped
And in qemu.log:
usb_ohci_iso_td_bad_cc_overrun ISO_TD start_offset=0x00c20910 > next_offset=0x00c2090f
Testing qemu 4.2:
> Free mem 2M ohci port2 conn FS
> setup { 80 6 0 1 0 0 8 0 }
> ED info=80000 { mps=8 en=0 d=0 } tail=620920
> td0 620880 nxt=620960 f2000000 setup cbp=620900 be=620907 cbp=0 be=620907
> td1 620960 nxt=620980 f3140000 in cbp=620908 be=62090f cbp=0 be=62090f
> td2 620980 nxt=620920 f3080000 out cbp=620910 be=62090f cbp=0 be=62090f
> rx { 12 1 0 2 0 0 0 8 }
> setup { 0 5 1 0 0 0 0 0 } tx {}
> ED info=80000 { mps=8 en=0 d=0 } tail=620880
> td0 620920 nxt=620960 f2000000 setup cbp=620900 be=620907 cbp=0 be=620907
> td1 620960 nxt=620880 f3100000 in cbp=620908 be=620907 cbp=0 be=620907
> setup { 80 6 0 1 0 0 12 0 }
> ED info=80001 { mps=8 en=0 d=1 } tail=620960
> td0 620880 nxt=6209c0 f2000000 setup cbp=620920 be=620927 cbp=0 be=620927
> td1 6209c0 nxt=6209e0 f3140000 in cbp=620928 be=620939 cbp=0 be=620939
> td2 6209e0 nxt=620960 f3080000 out cbp=62093a be=620939 cbp=0 be=620939
> rx { 12 1 0 2 0 0 0 8 f4 46 1 0 0 0 1 2 3 1 }
> setup { 80 6 0 2 0 0 0 1 }
> ED info=80001 { mps=8 en=0 d=1 } tail=620880
> td0 620960 nxt=6209a0 f2000000 setup cbp=620a20 be=620a27 cbp=0 be=620a27
> td1 6209a0 nxt=6209c0 f3140004 in cbp=620a28 be=620b27 cbp=620a48 be=620b27
> td2 6209c0 nxt=620880 f3080000 out cbp=620b28 be=620b27 cbp=0 be=620b27
> rx { 9 2 20 0 1 1 4 c0 0 9 4 0 0 2 8 6 50 0 7 5 81 2 40 0 0 7 5 2 2 40 0 0 }
> setup { 0 9 1 0 0 0 0 0 } tx {}
> ED info=80001 { mps=8 en=0 d=1 } tail=620900
> td0 620880 nxt=620940 f2000000 setup cbp=620a00 be=620a07 cbp=0 be=620a07
> td1 620940 nxt=620900 f3100000 in cbp=620a08 be=620a07 cbp=0 be=620a07
[1] The OS disk image has been emailed to philmd@linaro.org, mjt@tls.msk.ru,
and kraxel@redhat.com:
* testCbpOffBy1.img.xz
* sha256: f87baddcb86de845de12f002c698670a426affb40946025cc32694f9daa3abed
Signed-off-by: David Hubbard <dmamfmgm@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit modifies the dwc2_hsotg_read() and dwc2_hsotg_write() functions
to handle invalid address access gracefully. Instead of using
g_assert_not_reached(), which causes the program to abort, the functions
now log an error message and return a default value for reads or do
nothing for writes.
This change prevents the program from aborting and provides clear log
messages indicating when an invalid memory address is accessed.
Reproducer:
cat << EOF | qemu-system-aarch64 -display none \
-machine accel=qtest, -m 512M -machine raspi2b -m 1G -nodefaults \
-usb -drive file=null-co://,if=none,format=raw,id=disk0 -device \
usb-storage,port=1,drive=disk0 -qtest stdio
readl 0x3f980dfb
EOF
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20240618135610.3109175-1-zheyuma97@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In order to compute the amount of free space (in bytes), the number
of available blocks (f_bavail) should be multiplied by the block
size (f_frsize) instead of the total number of blocks (f_blocks).
Signed-off-by: Fabio D'Urso <fdurso@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240618003657.3344685-1-fdurso@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since commit 99761176ee ("usb: Remove legacy -usbdevice options
(host, serial, disk and net)") hw/usb/host.h is not used, remove
it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20240611102305.60735-2-philmd@linaro.org>
XHCI_FLAG_SS_FIRST was only used by the pc-i440fx-2.0 machine,
which got removed. Remove it and simplify various functions in
hcd-xhci.c.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-5-philmd@linaro.org>
XHCI_FLAG_FORCE_PCIE_ENDCAP was only used by the
pc-i440fx-2.0 machine, which got removed. Remove it
and simplify usb_xhci_pci_realize().
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-4-philmd@linaro.org>
Trace events aren't designed to be multi-lines.
Remove the newline characters.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Mads Ynddal <mads@ynddal.dk>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240606103943.79116-4-philmd@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Keep XenDevOps structures in .rodata.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240510104908.76908-5-philmd@linaro.org>
It is okay to register legacy backends in the middle of xen_bus_init().
All that the registration does is record the existence of the backend
in xenstore.
This makes it possible to remove them from the build without introducing
undefined symbols in xen_be_init(). It also removes the need for the
backend_register callback, whose only purpose is to avoid registering
nonfunctional backends.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240509170044.190795-8-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As far as I can tell it was never used.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240505171444.333302-5-dave@treblig.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the callsites have it readily available. This means that if
a device cared about the ResetType it would need to record it
in the enter phase method to use later on. Pass the type to
all three of the phase methods to avoid having to do that.
Commit created with
for dir in hw target include; do \
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/reset-type.cocci \
--keep-comments --smpl-spacing --in-place \
--include-headers --dir $dir; done
and no manual edits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org
Since the USB stubs are needed exactly when the Kconfig symbols are not
enabled, they can be placed in hw/usb/ and conditionalized on CONFIG_USB.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 30896374 started to pass the full BlockConf from usb-storage to
scsi-disk, while previously only a few select properties would be
forwarded. This enables the user to set more properties, e.g. the block
size, that are actually taking effect.
However, now the calls to blkconf_apply_backend_options() and
blkconf_blocksizes() in usb_msd_storage_realize() that modify some of
these properties take effect, too, instead of being silently ignored.
This means at least that the block sizes get an unconditional default of
512 bytes before the configuration is passed to scsi-disk.
Before commit 30896374, the property wouldn't be set for scsi-disk and
therefore the device dependent defaults would apply - 512 for scsi-hd,
but 2048 for scsi-cd. The latter default has now become 512, too, which
makes at least Windows 11 installation fail when installing from
usb-storage.
Fix this by simply not calling these functions any more in usb-storage
and passing BlockConf on unmodified (except for the BlockBackend). The
same functions are called by the SCSI code anyway and it sets the right
defaults for the actual media type.
Fixes: 3089637461 ('scsi: Don't ignore most usb-storage properties')
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2260
Reported-by: Jonas Svensson
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-id: 20240412144202.13786-1-kwolf@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes the invalid bInterfaceProtocol value 0x04 in the USB audio
AudioControl descriptors. It should be zero. While Linux and Windows
forgive this error, macOS 14 Sonoma does not. The usb-audio device does
not appear in macOS sound settings even though the device is recognized
and shows up in USB system information. According to the USB audio class
specs 1.0-4.0, valid values are 0x00, 0x20, 0x30 and 0x40. (Note also
that Linux prints the warning "unknown interface protocol 0x4, assuming
v1", but then proceeds as if the value was zero.)
This also fixes the invalid wTotalLength value in the multi-channel
setup AudioControl interface header descriptor (used when multi=on
and out.mixing-engine off). The combined length of all the descriptors
there add up to 0x37, not 0x38. In Linux, "lsusb -D ..." displays
incomplete descriptor information when this length is incorrect.
Signed-off-by: Joonas Kankaala <joonas.a.kankaala@gmail.com>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since Windows text files use CRLFs for all \n, the Windows version of QEMU
inserts a CR in the PCAP stream when a LF is encountered when using USB PCAP
files. This is due to the fact that the PCAP file is opened as TEXT instead
of BINARY.
To show an example, when using a very common protocol to USB disks, the BBB
protocol uses a 10-byte command packet. For example, the READ_CAPACITY(10)
command will have a command block length of 10 (0xA). When this 10-byte
command (part of the 31-byte CBW) is placed into the PCAP file, the Windows
file manager inserts a 0xD before the 0xA, turning the 31-byte CBW into a
32-byte CBW.
Actual CBW:
0040 55 53 42 43 01 00 00 00 08 00 00 00 80 00 0a 25 USBC...........%
0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...............
PCAP CBW
0040 55 53 42 43 01 00 00 00 08 00 00 00 80 00 0d 0a USBC............
0050 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 %..............
I believe simply opening the PCAP file as BINARY instead of TEXT will fix
this issue.
Resolves: https://bugs.launchpad.net/qemu/+bug/2054889
Signed-off-by: Benjamin David Lunt <benlunt@fysnet.net>
Message-ID: <000101da6823$ce1bbf80$6a533e80$@fysnet.net>
[thuth: Break long line to avoid checkpatch.pl error]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Because USB_EHCI_SYSBUS selects USB_EHCI, there is no need to include
hcd-ehci.c explicitly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223124406.234509-11-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Split the sysbus version to a separate file so that it is not
included in PCI-only machines, and adjust Kconfig for machines
that do need sysbus-ohci. The copyrights are based on the
time and employer of balrog and Paul Brook's contributions.
While adjusting the SM501 dependency, move it to the right place
instead of keeping it in the R4D machine.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223124406.234509-10-pbonzini@redhat.com>
[PMD: Rename some functions using 'ohci_sysbus_' prefix]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Inline the sole remaining use, which is for the -usbdevice command line.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223124406.234509-9-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Rename NB_PORTS as EHCI_PORTS to avoid definition clash
with UHCI equivalent:
hw/usb/hcd-ehci.h:40:9: error: 'NB_PORTS' macro redefined [-Werror,-Wmacro-redefined]
#define NB_PORTS 6 /* Max. Number of downstream ports */
^
hw/usb/hcd-uhci.h:38:9: note: previous definition is here
#define NB_PORTS 2
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Rename NB_PORTS as UHCI_PORTS to avoid definition clash
with EHCI equivalent:
hw/usb/hcd-uhci.h:38:9: error: 'NB_PORTS' macro redefined [-Werror,-Wmacro-redefined]
#define NB_PORTS 2
^
hw/usb/hcd-ehci.h:40:9: note: previous definition is here
#define NB_PORTS 6 /* Max. Number of downstream ports */
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We are going to modify these lines, fix their style
in order to avoid checkpatch.pl warning.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Allow boards to use the device creation functions even if USB itself
is not available; of course the functions will fail inexorably, but
this can be okay if the calls are conditional on the existence of
some USB host controller device. This is for example the case for
hw/mips/loongson3_virt.c.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
usb-storage is for the most part just a wrapper around an internally
created scsi-disk device. It uses DEFINE_BLOCK_PROPERTIES() to offer all
of the usual block device properties to the user, but then only forwards
a few select properties to the internal device while the rest is
silently ignored.
This changes scsi_bus_legacy_add_drive() to accept a whole BlockConf
instead of some individual values inside of it so that usb-storage can
now pass the whole configuration to the internal scsi-disk. This enables
the remaining block device properties, e.g. logical/physical_block_size
or discard_granularity.
Buglink: https://issues.redhat.com/browse/RHEL-22375
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240131130607.24117-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- We lost Juan and Leo in the maintainers file
- Steven's suspend state fix
- Steven's fix for coverity on migrate_mode
- Avihai's migration cleanup series
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZZY0TxIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wbSxgEAoM5g3wkc22lpAlRpU+hJUqT9NVOVQSK+
Fk7XJYTdSgABAKzykA6hAmU5Kj+yVI6jI874SVZbs2FWpFs4osvsKk4D
=sfuM
-----END PGP SIGNATURE-----
Merge tag 'migration-20240104-pull-request' of https://gitlab.com/peterx/qemu into staging
migration 1st pull for 9.0
- We lost Juan and Leo in the maintainers file
- Steven's suspend state fix
- Steven's fix for coverity on migrate_mode
- Avihai's migration cleanup series
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZZY0TxIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wbSxgEAoM5g3wkc22lpAlRpU+hJUqT9NVOVQSK+
# Fk7XJYTdSgABAKzykA6hAmU5Kj+yVI6jI874SVZbs2FWpFs4osvsKk4D
# =sfuM
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 04 Jan 2024 04:30:07 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [unknown]
# gpg: aka "Peter Xu <peterx@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240104-pull-request' of https://gitlab.com/peterx/qemu: (26 commits)
migration: fix coverity migrate_mode finding
migration/multifd: Remove unnecessary usage of local Error
migration: Remove unnecessary usage of local Error
migration: Fix migration_channel_read_peek() error path
migration/multifd: Remove error_setg() in migration_ioc_process_incoming()
migration/multifd: Fix leaking of Error in TLS error flow
migration/multifd: Simplify multifd_channel_connect() if else statement
migration/multifd: Fix error message in multifd_recv_initial_packet()
migration: Remove errp parameter in migration_fd_process_incoming()
migration: Refactor migration_incoming_setup()
migration: Remove nulling of hostname in migrate_init()
migration: Remove migrate_max_downtime() declaration
tests/qtest: postcopy migration with suspend
tests/qtest: precopy migration with suspend
tests/qtest: option to suspend during migration
tests/qtest: migration events
migration: preserve suspended for bg_migration
migration: preserve suspended for snapshot
migration: preserve suspended runstate
migration: propagate suspended runstate
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a vm transitions from running to suspended, runstate notifiers are
not called, so the notifiers still think the vm is running. Hence, when
we call vm_start to restore the suspended state, we call vm_state_notify
with running=1. However, some notifiers check for RUN_STATE_RUNNING.
They must check the running boolean instead.
No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/1704312341-66640-4-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
This variable is about the host OS, not the target. It is used a lot
more since the Meson conversion, but the original sin dates back to 2003.
Time to fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_DARWIN, CONFIG_LINUX and CONFIG_BSD are used in some rules, but
only CONFIG_LINUX has substantial use. Convert them all to if...endif.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This device is part of a superio/ISA bridge chip and IRQs from it are
routed to an ISA interrupt. Use via_isa_set_irq() function to implement
this in a vt82c686-uhci-pci specific irq handler.
This reverts commit 422a6e8075.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <ed5cdeaba7cf01eebdaa35f84c63427f4d8876b1.1701035944.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Recently MemReentrancyGuard was added to DeviceState to record that the
device is engaging in I/O. The network device backend needs to update it
when delivering a packet to a device.
In preparation for such a change, add MemReentrancyGuard * as a
parameter of qemu_new_nic().
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Rename variables or remove nested definitions where it makes sense,
so that we can finally compile the USB code with "-Wshadow", too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231004130822.113343-1-thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Starting from audio_driver_init, propagate errors via Error ** so that
audio_init_audiodevs can simply pass &error_fatal, and AUD_register_card
can signal faiure.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
[Reworked the audio/audio.c parts, while keeping Martin's hw/ changes. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In xhci_get_port_bandwidth(), we use a variable-length array to
construct the buffer to send back to the guest. Avoid the VLA
by using dma_memory_set() to directly request the memory system
to fill the guest memory with a string of '80's.
The codebase has very few VLAs, and if we can get rid of them all we
can make the compiler error on new additions. This is a defensive
measure against security bugs where an on-stack dynamic allocation
isn't correctly size-checked (e.g. CVE-2021-3527).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230824164818.2652452-1-peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20230823065335.1919380-14-mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
GLib recommend to use G_SOURCE_REMOVE / G_SOURCE_CONTINUE
for GSourceFunc callbacks. Our FEWatchFunc is a GSourceFunc
returning such value. Use such definitions which are
"more memorable" [*].
[*] https://docs.gtk.org/glib/callback.SourceFunc.html#return-value
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230705133139.54419-5-philmd@linaro.org>
Apache license is considered by some to be not compatible
with GPLv2+. Since QEMU as combined work is GPLv2-only,
these two files should be made compatible.
Reported-by: "Daniel P. Berrangé" <berrange@redhat.com>
Link: https://lore.kernel.org/qemu-devel/ZEpKXncC%2Fe6FKRe9@redhat.com/
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-By: canokeys.org (http://canokeys.org) <contact@canokeys.org>
Acked-by: YuanYang Meng <mkfssion@mkfssion.com>
Signed-off-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It is useful to extend the number of available PCIe devices to KVM guests
for passthrough scenarios and also to expose these models to a different
(big endian) architecture. Introduce a new config PCIE_DEVICES to select
models, Intel Ethernet adapters and one USB controller. These devices all
support MSI-X which is a requirement on s390x as legacy INTx are not
supported.
Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20230712080146.839113-1-clg@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When the OHCI controller's framenumber is incremented, HccaPad1 register
should be set to zero (Ref OHCI Spec 4.4)
ReactOS uses hccaPad1 to determine if the OHCI hardware is running,
consequently it fails this check in current qemu master.
Signed-off-by: Ryan Wendland <wendland@live.com.au>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1048
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This machine hardcodes initialization of the USB device, so select the
corresponding Kconfig. It is not enough to have it as "default y if
XLNX_VERSAL" at usb/Kconfig because building --without-default-devices
disables the default selection resulting in:
$ ./qemu-system-aarch64 -M xlnx-zcu102
qemu-system-aarch64: missing object type 'usb_dwc3'
Aborted (core dumped)
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230208192654.8854-8-farosas@suse.de>
Message-Id: <20230503091244.1450613-8-alex.bennee@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This protects devices from bh->mmio reentrancy issues.
Thanks: Thomas Huth <thuth@redhat.com> for diagnosing OS X test failure.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230427211013.2994127-5-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The i.MX USB Phy driver does not check register ranges, resulting in out of
bounds accesses if an attempt is made to access non-existing PHY registers.
Add range check and conditionally report bad accesses to fix the problem.
While at it, also conditionally log attempted writes to non-existing or
read-only registers.
Reported-by: Qiang Liu <cyruscyliu@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Qiang Liu <cyruscyliu@gmail.com>
Message-id: 20230316234926.208874-1-linux@roeck-us.net
Link: https://gitlab.com/qemu-project/qemu/-/issues/1408
Fixes: 0701a5efa0 ("hw/usb: Add basic i.MX USB Phy support")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
