VHDX test 070 failed, due to different output from qemu-io / qemu
when opening an image read-only that contains a log file. Filter
the output, and update the expected results to match the correct
output.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There are a handful of places in the block layer where a failure path
has a valid -errno value, yet error_setg() is used. Those instances
should instead use error_setg_errno(), to preserve as much error
information as possible.
This patch replaces those instances with error_setg_errno(), so that
errno is passed up the stack in the error message.
Reported-By: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
iSCSI currently does not need to do any actions to support the
current usage of bdrv_reopen(). However, it is important to note
a couple of things: 1.) A connection will not be re-established to
an iSCSI target, and 2.) If iscsi_open() is changed to parse 'flags',
then iscsi_reopen_prepare() may need to be more than a stub.
In light of the above, this commit adds comments above both of the
functions to bring attention to these facts.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
blockdev-add doesn't know about the device that the backend will be
attached to, this is a legacy -drive concept. Move the remaining checks
that use it to drive_init().
[Fam Zheng <famz@redhat.com> suggested line-wrapping to 80 chars as
required by the coding standard. I have fixed this.
--Stefan]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Most changes here are hotplug related:
This merges hotplug infrastructure changes by Igor,
some acpi related fixes, and PC fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJS+Jg2AAoJECgfDbjSjVRp2hIH/3PezOqYAJlp1LzHPYgTII5R
ZWdlHWJODB5QKGuDnJ0rKTZn+9n4f27Q7ynwqrodrLNtzglfmPUwtjTb52vbd1yh
qJ7BtvGIewUEjTPVs2feipb75jFZFhvIU46F1jPJAiaNKG0nl6zwVHn5XfFqesv2
4TlHAoqYvpUUuFcG7Qu+hREUrjb/tdxwP8EYM4qDPOSxguS2R2+3/17BVlPDQGia
bKl6j5EmnmmbQ0h8Sepy3YKh9d1rZnKFsolMFrL8ITjzEzzyKjpE284GNe/5eY25
HR25dY5eYTb0d3QPeH2O5sOrZgOFpTZc8WOo9Kxi0OTjWxFoZstZ1AOM3A2DAoY=
=EtLZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi,pc,pci fixes and enhancements
Most changes here are hotplug related:
This merges hotplug infrastructure changes by Igor,
some acpi related fixes, and PC fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 10 Feb 2014 09:13:26 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
ACPI: Remove commented-out code from HPET._CRS
hw/pci: switch to a generic hotplug handling for PCIDevice
pci/pcie: convert PCIE hotplug to use hotplug-handler API
pci/shpc: convert SHPC hotplug to use hotplug-handler API
acpi/piix4pm: convert ACPI PCI hotplug to use hotplug-handler API
qdev:pci: refactor PCIDevice to use generic "hotpluggable" property
hw/acpi: move typeinfo to the file end
qdev: add "hotpluggable" property to Device
qdev: add to BusState "hotplug-handler" link
define hotplug interface
loader: document that errno is set
pc.c: better error message on initrd sizing failure
pc_piix: enable legacy hotplug for Xen
qtest: don't report signals if qtest driver enabled
hw:piix4:acpi: reuse pcihp code for legacy PCI hotplug
pcihp: remove unused AcpiPciHpPciStatus.device_present field
pcihp: make pci_read() mmio calback compatible with legacy ACPI hotplug
pcihp: make PCI hotplug mmio handlers indifferent to PCI_HOTPLUG_ADDR
pcihp: replace enable|disable_device() with oneliners
pcihp: reduce number of device check events
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/alon/pull-libcacard.glusterfs:
libcacard: Don't link with all libraries QEMU links to
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=XErB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-anthony' into staging
Block patches
# gpg: Signature made Sun 09 Feb 2014 08:12:51 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-anthony:
block: Fix 32 bit truncation in mark_request_serialising()
blkdebug: Don't leak bs->file on failure
block: Don't call ROUND_UP with negative values
block: bdrv_aligned_pwritev: Assert overlap range
block: Fix memory leaks in bdrv_co_do_pwritev()
raw: Fix BlockLimits passthrough
qemu-iotests: add test for qcow2 preallocation with different cluster sizes
qcow2: check for NULL l2meta
qcow2: fix offset overflow in qcow2_alloc_clusters_at()
qcow2: remove n_start and n_end of qcow2_alloc_cluster_offset()
block/iscsi: always fill bs->bl.opt_transfer_length
block: Fail gracefully with missing filename
qemu-iotests: enable support for NFS protocol
qemu-iotests: enable test 016 and 025 to work with NFS protocol
qemu-iotests: blacklist test 020 for NFS protocol
qemu-iotests: change _supported_proto to file for various tests
block: add native support for NFS
qemu-iotest: Make 077 raw-only
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is to allow future patches to set properties before cpu::realize().
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
* more A64 Neon instructions
* AArch32 VCVTB and VCVTT ARMv8 instructions
* fixes to inaccuracies in GIC emulation
* libvixl disassembler for A64
* Allwinner SoC ethernet controller
* zynq software system reset support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=6kX6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20140208' into staging
target-arm queue:
* more A64 Neon instructions
* AArch32 VCVTB and VCVTT ARMv8 instructions
* fixes to inaccuracies in GIC emulation
* libvixl disassembler for A64
* Allwinner SoC ethernet controller
* zynq software system reset support
# gpg: Signature made Sat 08 Feb 2014 15:53:05 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140208: (29 commits)
arm/zynq: Add software system reset via SCLR
hw/arm/allwinner-a10: initialize EMAC
hw/net: add support for Allwinner EMAC Fast Ethernet controller
util/fifo8: clear fifo head upon reset
util/fifo8: implement push/pop of multiple bytes
disas: Implement disassembly output for A64
disas/libvixl: Fix upstream libvixl compilation issues
disas: Add subset of libvixl sources for A64 disassembler
rules.mak: Link with C++ if we have a C++ compiler
rules.mak: Support .cc as a C++ source file suffix
arm_gic: Add GICC_APRn state to the GICState
vmstate: Add uint32 2D-array support
arm_gic: Support setting/getting binary point reg
arm_gic: Keep track of SGI sources
arm_gic: Fix GIC pending behavior
target-arm: Add support for AArch32 64bit VCVTB and VCVTT
target-arm: A64: Add FNEG and FABS to the SIMD 2-reg-misc group
target-arm: A64: Add 2-reg-misc REV* instructions
target-arm: A64: Add narrowing 2-reg-misc instructions
target-arm: A64: Implement 2-reg-misc CNT, NOT and RBIT
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/kvaneesh/for-upstream:
hw/9pfs: fix P9_STATS_GEN handling
hw/9pfs: make get_st_gen() return ENOTTY error on special files
hw/9pfs: handle undefined FS_IOC_GETVERSION case in handle_ioc_getversion()
hw/9pfs: fix error handing in local_ioc_getversion()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 360e607 (address_space_translate: do not cross page boundaries,
2014-01-30) broke MMIO accesses in cases where the section is shorter
than the full register width. This can happen for example with the
Bochs DISPI registers, which are 16 bits wide but have only a 1-byte
long MemoryRegion (if you write to the "second byte" of the register
your access is discarded; it doesn't write only to half of the register).
Restrict the action of commit 360e607 to direct RAM accesses. This
is enough for Xen, since MMIO will not go through the mapcache.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
IRQNoFlags on HPET._CRS crashes WinXP because it causes the HPET
to conflict with the system timer and/or the RTC. It only occurs
on Apple hardware, and even there it is exposed fully only when
OS X is detected (via _OSI). Recent OS X versions work on QEMU
without this statement, so at this time there is no need to find
a better way to conditionally include the statement. This patch
removes the commented out (and wrong, should have been {0, 8})
statement from HPET._CRS.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
make qdev_unplug()/device_set_realized() to call hotplug handler's
plug/unplug methods if available and remove not needed anymore
hot(un)plug handling from PCIDevice.
In case if hotplug handler is not available, revert to the legacy
hotplug method for compatibility with not yet converted buses.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Split pcie_cap_slot_hotplug() into hotplug/unplug callbacks
and register them as "hotplug-handler" interface implementation of
PCIE_SLOT device.
Replace pci_bus_hotplug() wiring with setting link on PCI BUS
"hotplug-handler" property to PCI_BRIDGE_DEV device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Split shpc_device_hotplug() into hotplug/unplug callbacks
and register them as "hotplug-handler" interface implementation of
PCI_BRIDGE_DEV device.
Replace pci_bus_hotplug() wiring with setting link on PCI BUS
"hotplug-handler" property to PCI_BRIDGE_DEV device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Split piix4_device_hotplug() into hotplug/unplug callbacks
and register them as "hotplug-handler" interface implementation of
PIIX4_PM device.
Replace pci_bus_hotplug() wiring with setting link on
PCI BUS "hotplug-handler" property to PIIX4_PM device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Get rid of PCIDevice specific PCIDeviceClass.no_hotplug and use
generic DeviceClass.hotpluggable field instead.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
do so to avoid not necessary forward declarations and
place typeinfo registration at the file end where it's
usually expected.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently it's possible to make PCIDevice not hotpluggable
by using no_hotplug field of PCIDeviceClass. However it
limits this only to PCI devices and prevents from
generalizing hotplug code.
So add similar field to DeviceClass so it could be reused
with other Devices and would allow to replace PCI specific
hotplug callbacks with generic implementation. Following
patches will replace PCIDeviceClass.no_hotplug with this
new property.
In addition expose field as "hotpluggable" readonly property,
to make it possible to read its value via QOM interface.
Make DeviceClass hotpluggable by default as it was assumed
before.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It will allow to reuse field with different BUSes,
reducing code duplication. Field is intended for
replacing 'hotplug_qdev' field in PCIBus and also
will allow to avoid adding equivalent field to
DimmBus with possiblitity to refactor other BUSes
to use it instead of custom field.
In addition once all users of allow_hotplug field
are converted to new API, link could replace
allow_hotplug field in qdev hotplug code.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provide a generic hotplug interface for hotplug handlers.
Intended for replacing hotplug mechanism used by
PCI/PCIE/SHPC code and will be used for memory hotplug.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Document that get_image_size sets errno
on failure.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While ISA address space in prep machine is currently the one returned
by get_system_io(), this depends of the implementation of i82378/raven
devices, and this may not be the case forever.
Use the right ISA address space when adding some more ports to it.
We can use whatever ISA device on the right ISA bus, as all ISA devices
on the same ISA bus share the same ISA address space.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
As described in https://bugzilla.redhat.com/show_bug.cgi?id=987441 ,
libcacard currently links to all the libraries QEMU is linking to,
including glusterfs libraries, libiscsi, ... libcacard does not need all of
these. This patch ensures it's only linked with the libraries it needs.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Signed-off-by: Alon Levy <alevy@redhat.com>
On 32 bit hosts, size_t is too small for align as the bitmask
~(align - 1) will zero out the higher 32 bits of the offset.
While at it, change the local overlap_bytes variable to unsigned to
match the field in BdrvTrackedRequest.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The behaviour of the ROUND_UP macro with negative numbers isn't obvious.
It happens to do the right thing in this please, but better avoid it.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This adds assertions that the request that we actually end up passing to
the block driver (which includes RMW data and has therefore potentially
been rounded to alignment boundaries) is fully covered by the
overlap_{offset,size} fields of the associated BdrvTrackedRequest.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The error path for a failure in one of the two bdrv_aligned_preadv()
calls leaked head_buf or tail_buf, respectively. This fixes the memory
leak.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
