Commit Graph

208 Commits

Author SHA1 Message Date
Markus Armbruster
436054e22f hmp: Simplify how qmp_human_monitor_command() gets output
Commit 48c043d0d1 "hmp: human-monitor-command: stop using the Memory
chardev driver" left us "if string is non-empty, duplicate it, else
duplicate the empty string".  Meh.  Duplicate it unconditionally.

Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-2-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-19 10:38:19 +01:00
Eric Blake
54aa3de72e qapi: Use QAPI_LIST_PREPEND() where possible
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND().  But places where we must keep the list in order
by appending remain open-coded until later patches.

Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
 new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved.  Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-12-19 10:20:14 +01:00
Yutao Ai
33b1fa9485 monitor:Don't use '#' flag of printf format ('%#') in format strings
Delete '#' and use '0x' prefix instead

Signed-off-by: Yutao Ai <aiyutao@huawei.com>
Message-Id: <20201125014514.55562-4-aiyutao@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-18 10:08:24 +00:00
Yutao Ai
89854b9558 monitor:braces {} are necessary for all arms of this statement
Fix the errors by add {}

Signed-off-by: Yutao Ai <aiyutao@huawei.com>
Message-Id: <20201125014514.55562-3-aiyutao@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-18 10:08:24 +00:00
Yutao Ai
d22b854dc5 monitor:open brace '{' following struct go on the same line
Move the open brace '{' following struct go on the same line

Signed-off-by: Yutao Ai <aiyutao@huawei.com>
Message-Id: <20201125014514.55562-2-aiyutao@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-18 10:08:24 +00:00
Alejandro Jimenez
e6dba04813 qmp: generalize watchdog-set-action to -no-reboot/-no-shutdown
Add a QMP command to allow for the behaviors specified by the
-no-reboot and -no-shutdown command line option to be set at runtime.
The new command is named set-action and takes optional arguments, named
after an event, that provide a corresponding action to take.

Example:

-> { "execute": "set-action",
     "arguments": {
	"reboot": "none",
	"shutdown": "poweroff",
	"watchdog": "debug" } }
<- { "return": {} }

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-4-git-send-email-alejandro.j.jimenez@oracle.com>
[Split the series differently, with -action based on the QMP command. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15 12:51:57 -05:00
Paolo Bonzini
2f181fbd5a machine: introduce MachineInitPhase
Generalize the qdev_hotplug variable to the different phases of
machine initialization.  We would like to allow different
monitor commands depending on the phase.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15 12:51:52 -05:00
Paolo Bonzini
b4e1a34211 vl: remove separate preconfig main_loop
Move post-preconfig initialization to the x-exit-preconfig.  If preconfig
is not requested, just exit preconfig mode immediately with the QMP
command.

As a result, the preconfig loop will run with accel_setup_post
and os_setup_post restrictions (xen_restrict, chroot, etc.)
already done.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15 12:51:49 -05:00
Paolo Bonzini
164dafd174 remove preconfig state
The preconfig state is only used if -incoming is not specified, which
makes the RunState state machine more tricky than it need be.  However
there is already an equivalent condition which works even with -incoming,
namely qdev_hotplug.  Use it instead of a separate runstate.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15 12:51:48 -05:00
Peter Maydell
b785d25e91 * Fix for NULL segments (Bin Meng)
* Support for 32768 CPUs on x86 without IOMMU (David)
 * PDEP/PEXT fix and testcase (myself)
 * Remove bios_name and ram_size globals (myself)
 * qemu_init rationalization (myself)
 * Update kernel-doc (myself + upstream patches)
 * Propagate MemTxResult across DMA and PCI functions (Philippe)
 * Remove master/slave when applicable (Philippe)
 * WHPX support for in-kernel irqchip (Sunil)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl/SWS4UHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroMHLAf8Cr1nOn1ou2S2H9vePeoqRAVGdQBv
 tbQ/nZs+2NZMyhLF7mBj7y6Ym0wNyXzkyiFnN1wR04V5e0tF+q1Y0OOZtihJ+Ntk
 esjzHAzdqS22xI2dNnNDBo69eQQKDq3C0Ug5x6z63tO81AoTNKP+vq+QbZqe7v7K
 2TScroAnhX9zE5Hz1+qJ35w13EMCNFnUPHNcOwxVSGHj4HNoEpIjjcE6rme46jX+
 REsEGKJKIJ88aV2hzOLSrdJ0/mNuWsjfOvcfgtoIYUPbb55hHMykqD+LapoyEp8K
 gjnco6JT6wWFN1+tVxTjY4TaERVw+NGomd2QyHSbanDoRd8igFhxu2gBnQ==
 =yeQi
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* Fix for NULL segments (Bin Meng)
* Support for 32768 CPUs on x86 without IOMMU (David)
* PDEP/PEXT fix and testcase (myself)
* Remove bios_name and ram_size globals (myself)
* qemu_init rationalization (myself)
* Update kernel-doc (myself + upstream patches)
* Propagate MemTxResult across DMA and PCI functions (Philippe)
* Remove master/slave when applicable (Philippe)
* WHPX support for in-kernel irqchip (Sunil)

# gpg: Signature made Thu 10 Dec 2020 17:21:50 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (113 commits)
  scripts: kernel-doc: remove unnecessary change wrt Linux
  Revert "docs: temporarily disable the kernel-doc extension"
  scripts: kernel-doc: use :c:union when needed
  scripts: kernel-doc: split typedef complex regex
  scripts: kernel-doc: fix typedef parsing
  Revert "kernel-doc: Handle function typedefs that return pointers"
  Revert "kernel-doc: Handle function typedefs without asterisks"
  scripts: kernel-doc: try to use c:function if possible
  scripts: kernel-doc: fix line number handling
  scripts: kernel-doc: allow passing desired Sphinx C domain dialect
  scripts: kernel-doc: don't mangle with parameter list
  scripts: kernel-doc: fix typedef identification
  scripts: kernel-doc: reimplement -nofunction argument
  scripts: kernel-doc: fix troubles with line counts
  scripts: kernel-doc: use a less pedantic markup for funcs on Sphinx 3.x
  scripts: kernel-doc: make it more compatible with Sphinx 3.x
  Revert "kernel-doc: Use c:struct for Sphinx 3.0 and later"
  Revert "scripts/kerneldoc: For Sphinx 3 use c:macro for macros with arguments"
  scripts: kernel-doc: add support for typedef enum
  kernel-doc: add support for ____cacheline_aligned attribute
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-11 13:50:35 +00:00
Tobin Feldman-Fitzthum
c7f7e6970d sev: add sev-inject-launch-secret
AMD SEV allows a guest owner to inject a secret blob
into the memory of a virtual machine. The secret is
encrypted with the SEV Transport Encryption Key and
integrity is guaranteed with the Transport Integrity
Key. Although QEMU facilitates the injection of the
launch secret, it cannot access the secret.

Signed-off-by: Tobin Feldman-Fitzthum <tobin@linux.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Message-Id: <20201027170303.47550-1-tobin@linux.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-10 17:33:17 -05:00
Paolo Bonzini
4cd2927472 hmp: introduce cmd_available
Combine the RUN_STATE_PRECONFIG and cmd_can_preconfig checks
into a single function, to avoid repeating the same expression
(or its negation after applying DeMorgan's rule) over and
over again.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10 12:15:15 -05:00
Paolo Bonzini
b326b6ea79 make ram_size local to vl.c
Use the machine properties for the leftovers too.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10 12:15:10 -05:00
Markus Armbruster
99750d82e4 ui: Tweak a client_migrate_info error message
Change

    Parameter 'protocol' expects spice

to

    Parameter 'protocol' expects 'spice'

for consistency with similar error messages elsewhere.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-7-armbru@redhat.com>
2020-12-10 17:16:44 +01:00
Markus Armbruster
9e1b9c6c2d ui: Improve a client_migrate_info error message
client_migrate_info reports spice_server_migrate_connect() failure as
"An undefined error has occurred".  Improve to "Could not set up
display for migration".

QERR_UNDEFINED_ERROR is now unused.  Drop.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-6-armbru@redhat.com>
2020-12-10 17:16:44 +01:00
Markus Armbruster
9272186d3d ui: Improve some set_passwd, expire_password error messages
set_passwd and expire_password reject invalid "protocol" with "Invalid
parameter 'protocol'".  Misleading; the parameter is valid, its value
isn't.  Improve to "Parameter 'protocol' expects 'vnc' or 'spice'".

expire_password fails with "Could not set password".  Misleading;
improve to "Could not set password expire time".

QERR_SET_PASSWD_FAILED is now unused.  Drop.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-5-armbru@redhat.com>
2020-12-10 17:16:44 +01:00
Markus Armbruster
f820af8743 qerror: Eliminate QERR_ macros used in just one place
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-3-armbru@redhat.com>
2020-12-10 17:16:44 +01:00
Paolo Bonzini
ad6f932fe8 net: do not exit on "netdev_add help" monitor command
"netdev_add help" is causing QEMU to exit because the code that
invokes show_netdevs is shared between CLI and HMP processing.
Move the check to the callers so that exit(0) remains only
in the CLI flow.

"netdev_add help" is not fixed by this patch; that is left for
later work.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-24 10:40:17 +08:00
Kevin Wolf
e7cff9c68d hmp: Pass monitor to mon_get_cpu_env()
mon_get_cpu_env() is indirectly called monitor_parse_arguments() where
the current monitor isn't set yet. Instead of using monitor_cur_env(),
explicitly pass the Monitor pointer to the function.

Without this fix, an HMP command like "x $pc" crashes like this:

  #0  0x0000555555caa01f in mon_get_cpu_sync (mon=0x0, synchronize=true) at ../monitor/misc.c:270
  #1  0x0000555555caa141 in mon_get_cpu (mon=0x0) at ../monitor/misc.c:294
  #2  0x0000555555caa158 in mon_get_cpu_env () at ../monitor/misc.c:299
  #3  0x0000555555b19739 in monitor_get_pc (mon=0x555556ad2de0, md=0x5555565d2d40 <monitor_defs+1152>, val=0) at ../target/i386/monitor.c:607
  #4  0x0000555555cadbec in get_monitor_def (mon=0x555556ad2de0, pval=0x7fffffffc208, name=0x7fffffffc220 "pc") at ../monitor/misc.c:1681
  #5  0x000055555582ec4f in expr_unary (mon=0x555556ad2de0) at ../monitor/hmp.c:387
  #6  0x000055555582edbb in expr_prod (mon=0x555556ad2de0) at ../monitor/hmp.c:421
  #7  0x000055555582ee79 in expr_logic (mon=0x555556ad2de0) at ../monitor/hmp.c:455
  #8  0x000055555582eefe in expr_sum (mon=0x555556ad2de0) at ../monitor/hmp.c:484
  #9  0x000055555582efe8 in get_expr (mon=0x555556ad2de0, pval=0x7fffffffc418, pp=0x7fffffffc408) at ../monitor/hmp.c:511
  #10 0x000055555582fcd4 in monitor_parse_arguments (mon=0x555556ad2de0, endp=0x7fffffffc890, cmd=0x555556675b50 <hmp_cmds+7920>) at ../monitor/hmp.c:876
  #11 0x00005555558306a8 in handle_hmp_command (mon=0x555556ad2de0, cmdline=0x555556ada452 "$pc") at ../monitor/hmp.c:1087
  #12 0x000055555582df14 in monitor_command_cb (opaque=0x555556ad2de0, cmdline=0x555556ada450 "x $pc", readline_opaque=0x0) at ../monitor/hmp.c:47

After this fix, nothing is left in monitor_parse_arguments() that can
indirectly call monitor_cur(), so the fix is complete.

Fixes: ff04108a0e
Reported-by: lichun <lichun@ruijie.com.cn>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201113114326.97663-4-kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-13 12:45:51 +00:00
Kevin Wolf
43cf067ff8 hmp: Pass monitor to MonitorDef.get_value()
All of these callbacks use mon_get_cpu_env(). Pass the Monitor
pointer to them it in preparation for adding a monitor argument to
mon_get_cpu_env().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201113114326.97663-3-kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-13 12:45:43 +00:00
Kevin Wolf
2fc5d01bb4 hmp: Pass monitor to mon_get_cpu()
mon_get_cpu() is indirectly called monitor_parse_arguments() where
the current monitor isn't set yet. Instead of using monitor_cur(),
explicitly pass the Monitor pointer to the function.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201113114326.97663-2-kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-13 12:45:35 +00:00
Marc-André Lureau
0d9b90ce5c console: make QMP/HMP screendump run in coroutine
Thanks to the monitors' coroutine support (merge commit b7092cda1b),
the screendump handler can trigger a graphic_hw_update(), yield and let
the main loop run until update is done. Then the handler is resumed, and
ppm_save() will write the screen image to disk in the coroutine context.

The IO is still blocking though, as the file is set blocking so far,
this could be addressed by some future change (with other caveats).

Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1230527

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20201027133602.3038018-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-11-04 08:02:25 +01:00
Kirti Wankhede
3710586caa qapi: Add VFIO devices migration stats in Migration stats
Added amount of bytes transferred to the VM at destination by all VFIO
devices

Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01 12:30:51 -07:00
Gerd Hoffmann
864a024c69 spice: move display_add_client() to QemuSpiceOps.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-8-kraxel@redhat.com
2020-10-21 15:46:14 +02:00
Gerd Hoffmann
08ad262643 spice: move auth functions to QemuSpiceOps.
Move qemu_spice_set_passwd() and qemu_spice_set_pw_expire() functions to
QemuSpiceOps.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-7-kraxel@redhat.com
2020-10-21 15:46:14 +02:00
Gerd Hoffmann
7477477ca7 spice: add QemuSpiceOps, move migrate_info
Add QemuSpiceOps struct.  This struct holds function pointers to the
spice functions.  It will be initialized with pointers to the stub
functions.  When spice gets initialized the function pointers will
be re-written to the real functions.

The spice stubs will move from qemu-spice.h to spice-module.c for that,
because they will be needed for both "CONFIG_SPICE=n" and "CONFIG_SPICE=y
but spice module not loaded" cases.

This patch adds the infrastructure and starts with moving
qemu_spice_migrate_info() to QemuSpiceOps.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-3-kraxel@redhat.com
2020-10-21 15:46:14 +02:00
Peter Maydell
7daf8f8d01 Block layer patches:
- qemu-storage-daemon: Remove QemuOpts from --object parser
 - monitor: Fix order in monitor_cleanup()
 - Deprecate the sheepdog block driver
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAl+IYSoRHGt3b2xmQHJl
 ZGhhdC5jb20ACgkQfwmycsiPL9YH0g//aXB91wIDBVvyRYddD7rv9tjr6nzlqqkE
 gsHGNiSDtNrNvmPyDl5JMF+xkki6mF4AKOwZYgDXaz/Rg/93DbR73yt3ZqdHUwOq
 hGSHJhdxyWJzLoL3di2ORQDrj414YLJlbVNUJMZnB7AGr/T0lHFwLbJr2dlBKONn
 uwaqoQ5fLnGY3szpQgJIZuHP//5aX3Zx1KyRSnlF93blRgKDJSD7NpEdIJyhFLd7
 qXcGPx75XsNPMCuxbAZFceMLUWsLh1//zuJU3dC4QS0lDjc+99oN7xiUT8DhlQAm
 nwSNaRoHdkVMtSFpJ/gmQzOFQbULXnAuLcdVXTWL31EGbINv64AjBrWByDJ0DsU5
 Q+zTmpf8m6BnQyTghE7LkxJFBfVdqRVG6ebZiMjuoyvUXRhBVCYGHv2qddVTLL5O
 5ixdArwgfXE0lRyF2Z2UUhZhAQO4YnHJxReRGwzSRCmM1kqzB5cSmNJylkbWYDh0
 aku3skXTPUBBE/bRpsIwB+lEEm8OaZSQQrHLdaHtUHM7qNFWmYbOdZOCQOG845QX
 sLq1Ghhtki6e2IZLPjOFOdm+p2cStLbfGExunkjhke9osTNfLNVSV8JNT0xORPAm
 CQCLn6EiEwpMEHbIn8AsSWRl1hbqCubxRHeeCSKmM7EtHd6mr/osRjeo8jdlK/Qb
 z7ztkatr7iU=
 =gBMn
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- qemu-storage-daemon: Remove QemuOpts from --object parser
- monitor: Fix order in monitor_cleanup()
- Deprecate the sheepdog block driver

# gpg: Signature made Thu 15 Oct 2020 15:48:10 BST
# gpg:                using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg:                issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  block: deprecate the sheepdog block driver
  block: drop moderated sheepdog mailing list from MAINTAINERS file
  monitor: Fix order in monitor_cleanup()
  qemu-storage-daemon: Remove QemuOpts from --object parser
  qom: Add user_creatable_print_help_from_qdict()
  qom: Factor out helpers from user_creatable_print_help()
  keyval: Parse help options
  keyval: Fix parsing of ',' in value of implied key
  test-keyval: Demonstrate misparse of ',' with implied key
  keyval: Fix and clarify grammar

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-16 17:39:01 +01:00
Kevin Wolf
357bda9590 monitor: Fix order in monitor_cleanup()
We can only destroy Monitor objects after we're sure that they are not
in use by the dispatcher coroutine any more. This fixes crashes like the
following where we tried to destroy a monitor mutex while the dispatcher
coroutine still holds it:

 (gdb) bt
 #0  0x00007fe541cf4bc5 in raise () at /lib64/libc.so.6
 #1  0x00007fe541cdd8a4 in abort () at /lib64/libc.so.6
 #2  0x000055c24e965327 in error_exit (err=16, msg=0x55c24eead3a0 <__func__.33> "qemu_mutex_destroy") at ../util/qemu-thread-posix.c:37
 #3  0x000055c24e9654c3 in qemu_mutex_destroy (mutex=0x55c25133e0f0) at ../util/qemu-thread-posix.c:70
 #4  0x000055c24e7cfaf1 in monitor_data_destroy_qmp (mon=0x55c25133dfd0) at ../monitor/qmp.c:439
 #5  0x000055c24e7d23bc in monitor_data_destroy (mon=0x55c25133dfd0) at ../monitor/monitor.c:615
 #6  0x000055c24e7d253a in monitor_cleanup () at ../monitor/monitor.c:644
 #7  0x000055c24e6cb002 in qemu_cleanup () at ../softmmu/vl.c:4549
 #8  0x000055c24e0d259b in main (argc=24, argv=0x7ffff66b0d58, envp=0x7ffff66b0e20) at ../softmmu/main.c:51

Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201013125027.41003-1-kwolf@redhat.com>
Tested-by: Ben Widawsky <ben.widawsky@intel.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-15 16:06:28 +02:00
Gerd Hoffmann
d72c34cccc meson: add spice_headers dependency.
Used for files which (with CONFIG_SPICE=y) depend on spice header files
to pick up some enum, but which do not depend on on the actual spice
shared library.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201014121120.13482-6-kraxel@redhat.com
2020-10-15 11:14:40 +02:00
Kevin Wolf
bb4b9ead95 hmp: Add support for coroutine command handlers
Often, QMP command handlers are not only called to handle QMP commands,
but also from a corresponding HMP command handler. In order to give them
a consistent environment, optionally run HMP command handlers in a
coroutine, too.

The implementation is a lot simpler than in QMP because for HMP, we
still block the VM while the coroutine is running.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201005155855.256490-11-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:20 +02:00
Kevin Wolf
9ce44e2ce2 qmp: Move dispatcher to a coroutine
This moves the QMP dispatcher to a coroutine and runs all QMP command
handlers that declare 'coroutine': true in coroutine context so they
can avoid blocking the main loop while doing I/O or waiting for other
events.

For commands that are not declared safe to run in a coroutine, the
dispatcher drops out of coroutine context by calling the QMP command
handler from a bottom half.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201005155855.256490-10-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:20 +02:00
Kevin Wolf
e69ee454b5 monitor: Make current monitor a per-coroutine property
This way, a monitor command handler will still be able to access the
current monitor, but when it yields, all other code code will correctly
get NULL from monitor_cur().

This uses a hash table to map the coroutine pointer to the current
monitor of that coroutine.  Outside of coroutine context, we associate
the current monitor with the leader coroutine of the current thread.

Approaches to implement some form of coroutine local storage directly in
the coroutine core code have been considered and discarded because they
didn't end up being much more generic than the hash table and their
performance impact on coroutines not using coroutine local storage was
unclear. As the block layer uses a coroutine per I/O request, this is a
fast path and we have to be careful. It's safest to just stay out of
this path with code only used by the monitor.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201005155855.256490-8-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:19 +02:00
Kevin Wolf
41725fa7ed qmp: Call monitor_set_cur() only in qmp_dispatch()
The correct way to set the current monitor for a coroutine handler will
be different than for a blocking handler, so monitor_set_cur() needs to
be called in qmp_dispatch().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-7-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:19 +02:00
Kevin Wolf
57d3635e42 qmp: Assert that no other monitor is active
monitor_qmp_dispatch() is never supposed to be called in the context of
another monitor, so assert that monitor_cur() is NULL instead of saving
and restoring it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-6-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:19 +02:00
Kevin Wolf
ff04108a0e hmp: Update current monitor only in handle_hmp_command()
The current monitor is updated relatively early in the command handling
code even though only the command handler actually needs it.

The current monitor will become coroutine-local later, so we can only
update it when we know in which coroutine the command will be exectued.
Move it to handle_hmp_command() where this information will be
available.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201005155855.256490-5-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:19 +02:00
Kevin Wolf
947e47448d monitor: Use getter/setter functions for cur_mon
cur_mon really needs to be coroutine-local as soon as we move monitor
command handlers to coroutines and let them yield. As a first step, just
remove all direct accesses to cur_mon so that we can implement this in
the getter function later.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-4-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:19 +02:00
Kevin Wolf
87e6f4a4d6 monitor: Add Monitor parameter to monitor_get_cpu_index()
Most callers actually don't have to rely on cur_mon, but already know
for which monitor they call monitor_get_cpu_index().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-3-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:19 +02:00
Kevin Wolf
dcba65f824 monitor: Add Monitor parameter to monitor_set_cpu()
Most callers actually don't have to rely on cur_mon, but already know
for which monitor they call monitor_set_cpu().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201005155855.256490-2-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:19 +02:00
Philippe Mathieu-Daudé
61c7f9876a qapi: Extract PCI commands to 'pci.json'
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Extracting the PCI commands to their own schema reduces the size of
the qapi-misc* headers generated, and pulls less QAPI-generated code
into user-mode.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-9-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 15:41:36 +02:00
Philippe Mathieu-Daudé
27c9188fa0 qapi: Extract ACPI commands to 'acpi.json'
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Extracting the ACPI commands to their own schema reduces the size of
the qapi-misc* headers generated, and pulls less QAPI-generated code
into user-mode.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-8-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 15:41:36 +02:00
Philippe Mathieu-Daudé
a83e24ba1a qapi: Restrict balloon-related commands to machine code
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Restricting the balloon-related commands to machine.json pulls less
QAPI-generated code into user-mode.

Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-4-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 15:41:35 +02:00
Dr. David Alan Gilbert
0210c3b39b monitor: Use LOCK_GUARD macros
Use the lock guard macros in monitor/misc.c - saves
a lot of unlocks in error paths, and the occasional goto.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200922095741.101911-1-dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-09-25 12:45:58 +01:00
Stefan Hajnoczi
d73415a315 qemu/atomic.h: rename atomic_ to qatomic_
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:

  $ CC=clang CXX=clang++ ./configure ... && make
  ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)

Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.

This patch was generated using:

  $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
    sort -u >/tmp/changed_identifiers
  $ for identifier in $(</tmp/changed_identifiers); do
        sed -i "s%\<$identifier\>%q$identifier%g" \
            $(git grep -I -l "\<$identifier\>")
    done

I manually fixed line-wrap issues and misaligned rST tables.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
2020-09-23 16:07:44 +01:00
Daniel P. Berrangé
60efffa41b monitor: simplify functions for getting a dup'd fdset entry
Currently code has to call monitor_fdset_get_fd, then dup
the return fd, and then add the duplicate FD back into the
fdset. This dance is overly verbose for the caller and
introduces extra failure modes which can be avoided by
folding all the logic into monitor_fdset_dup_fd_add and
removing monitor_fdset_get_fd entirely.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-16 10:33:48 +01:00
Paolo Bonzini
feabc71dfa configure: do not include dependency flags in QEMU_CFLAGS and LIBS
All Meson executables should specify their dependencies explicitly, either
directly or indirectly via declare_dependency.  Makefiles instead did
not propagate dependencies correctly from static libraries, for example.
Therefore, flags for dependencies need not be included in QEMU_CFLAGS.
LIBS is not used at all, so drop that one as well.

In a few cases the dependencies were not yet specified, so add them.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-08 11:43:16 +02:00
Max Reitz
31e4c354b3 migration: Add block-bitmap-mapping parameter
This migration parameter allows mapping block node names and bitmap
names to aliases for the purpose of block dirty bitmap migration.

This way, management tools can use different node and bitmap names on
the source and destination and pass the mapping of how bitmaps are to be
transferred to qemu (on the source, the destination, or even both with
arbitrary aliases in the migration stream).

While touching this code, fix a bug where bitmap names longer than 255
bytes would fail an assertion in qemu_put_counted_string().

Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200820150725.68687-2-mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2020-08-21 08:56:09 -05:00
Paolo Bonzini
ff219dca9f meson: convert common QMP bits for qemu and qemu-storage-daemon
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21 06:30:22 -04:00
Paolo Bonzini
243af0225a trace: switch position of headers to what Meson requires
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path.  In particular the tracing headers are using
$(build_root)/$(<D).

In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".

This patch is too ugly to be applied to the Makefiles now.  It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21 06:18:24 -04:00
Philippe Mathieu-Daudé
833ef7ec56 monitor/misc: Remove unused "chardev/char-mux.h" include
monitor/misc.c never required "chardev/char-mux.h", remove it.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200423202112.644-2-philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2020-07-13 11:59:47 +04:00
Markus Armbruster
b11a093c60 qapi: Smooth another visitor error checking pattern
Convert

    visit_type_FOO(v, ..., &ptr, &err);
    ...
    if (err) {
        ...
    }

to

    visit_type_FOO(v, ..., &ptr, errp);
    ...
    if (!ptr) {
        ...
    }

for functions that set @ptr to non-null / null on success / error.

Eliminate error_propagate() that are now unnecessary.  Delete @err
that are now unused.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-40-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Markus Armbruster
62a35aaa31 qapi: Use returned bool to check for failure, Coccinelle part
The previous commit enables conversion of

    visit_foo(..., &err);
    if (err) {
        ...
    }

to

    if (!visit_foo(..., errp)) {
        ...
    }

for visitor functions that now return true / false on success / error.
Coccinelle script:

    @@
    identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*";
    expression list args;
    typedef Error;
    Error *err;
    @@
    -    fun(args, &err);
    -    if (err)
    +    if (!fun(args, &err))
         {
             ...
         }

A few line breaks tidied up manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-19-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Markus Armbruster
3c4b89c3b2 hmp: Eliminate a variable in hmp_migrate_set_parameter()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-17-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
David Hildenbrand
722a3c783e virtio-pci: Send qapi events when the virtio-mem size changes
Let's register the notifier and trigger the qapi event with the right
device id.

MEMORY_DEVICE_SIZE_CHANGE is similar to BALLOON_CHANGE, however on a
memory device level.

Don't unregister the notifier (we neither have finalize() nor unrealize()
for VirtIOPCIProxy, so it's not that simple to do it) - both devices are
expected to vanish at the same time.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-18-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-03 07:57:04 -04:00
David Hildenbrand
2e70874b16 hmp: Handle virtio-mem when printing memory device info
Print the memory device info just like for other memory devices.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-14-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-03 07:57:04 -04:00
Mao Zhongyi
afb5d01cb6 monitor/hmp-cmds: improvements for the 'info migrate'
When running:

(qemu) info migrate
globals:
store-global-state: on
only-migratable: off
...
xbzrle transferred: 640892 kbytes
xbzrle pages: 16645936 pages
xbzrle cache miss: 1525426
xbzrle cache miss rate: 0.09
xbzrle encoding rate: 91.42
xbzrle overflow: 40896
...
compression pages: 377710 pages
compression busy: 0
compression busy rate: 0.00
compressed size: 463169457
compression rate: 3.33

Add units for 'xbzrle cache miss' and 'compressed size',
make it easier to read.

Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20200603080904.997083-8-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-17 17:48:39 +01:00
Mao Zhongyi
ac9c95b13f monitor/hmp-cmds: add 'goto end' to reduce duplicate code.
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20200603080904.997083-7-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-17 17:48:39 +01:00
Mao Zhongyi
0705ecc4ad monitor/hmp-cmds: delete redundant Error check before invoke hmp_handle_error()
hmp_handle_error() does Error check internally.

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20200603080904.997083-6-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-17 17:48:39 +01:00
Mao Zhongyi
fe025508c0 monitor/hmp-cmds: don't silently output when running 'migrate_set_downtime' fails
Although 'migrate_set_downtime' has been deprecated and replaced
with 'migrate_set_parameter downtime_limit', it has not been
completely eliminated, possibly due to compatibility with older
versions. I think as long as this old parameter is running, we
should report appropriate message when something goes wrong, not
be silent.

before:
(qemu) migrate_set_downtime -1
(qemu)

after:
(qemu) migrate_set_downtime -1
Error: Parameter 'downtime_limit' expects an integer in the range of 0 to 2000 seconds

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200603080904.997083-5-maozhongyi@cmss.chinamobile.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-17 17:48:39 +01:00
Mao Zhongyi
39337f1211 monitor/hmp-cmds: add units for migrate_parameters
When running:
(qemu) info migrate_parameters
announce-initial: 50 ms
announce-max: 550 ms
announce-step: 100 ms
compress-wait-thread: on
...
max-bandwidth: 33554432 bytes/second
downtime-limit: 300 milliseconds
x-checkpoint-delay: 20000
...
xbzrle-cache-size: 67108864

add units for the parameters 'x-checkpoint-delay' and
'xbzrle-cache-size', it's easier to read, also move
milliseconds to ms to keep the same style.

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200603080904.997083-4-maozhongyi@cmss.chinamobile.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-17 17:48:39 +01:00
Peter Maydell
7d3660e798 * Miscellaneous fixes and feature enablement (many)
* SEV refactoring (David)
 * Hyper-V initial support (Jon)
 * i386 TCG fixes (x87 and SSE, Joseph)
 * vmport cleanup and improvements (Philippe, Liran)
 * Use-after-free with vCPU hot-unplug (Nengyuan)
 * run-coverity-scan improvements (myself)
 * Record/replay fixes (Pavel)
 * -machine kernel_irqchip=split improvements for INTx (Peter)
 * Code cleanups (Philippe)
 * Crash and security fixes (PJP)
 * HVF cleanups (Roman)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7jpdAUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroMfjwf/X7+0euuE9dwKFKDDMmIi+4lRWnq7
 gSOyE1BYSfDIUXRIukf64konXe0VpiotNYlyEaYnnQjkMdGm5E9iXKF+LgEwXj/t
 NSGkfj5J3VeWRG4JJp642CSN/aZWO8uzkenld3myCnu6TicuN351tDJchiFwAk9f
 wsXtgLKd67zE8MLVt8AP0rNTbzMHttPXnPaOXDCuwjMHNvMEKnC93UeOeM0M4H5s
 3Dl2HvsNWZ2SzUG9mAbWp0bWWuoIb+Ep9//87HWANvb7Z8jratRws18i6tYt1sPx
 8zOnUS87sVnh1CQlXBDd9fEcqBUVgR9pAlqaaYavNhFp5eC31euvpDU8Iw==
 =F4sU
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Miscellaneous fixes and feature enablement (many)
* SEV refactoring (David)
* Hyper-V initial support (Jon)
* i386 TCG fixes (x87 and SSE, Joseph)
* vmport cleanup and improvements (Philippe, Liran)
* Use-after-free with vCPU hot-unplug (Nengyuan)
* run-coverity-scan improvements (myself)
* Record/replay fixes (Pavel)
* -machine kernel_irqchip=split improvements for INTx (Peter)
* Code cleanups (Philippe)
* Crash and security fixes (PJP)
* HVF cleanups (Roman)

# gpg: Signature made Fri 12 Jun 2020 16:57:04 BST
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (116 commits)
  target/i386: Remove obsolete TODO file
  stubs: move Xen stubs to accel/
  replay: fix replay shutdown for console mode
  exec/cpu-common: Move MUSB specific typedefs to 'hw/usb/hcd-musb.h'
  hw/usb: Move device-specific declarations to new 'hcd-musb.h' header
  exec/memory: Remove unused MemoryRegionMmio type
  checkpatch: reversed logic with acpi test checks
  target/i386: sev: Unify SEVState and SevGuestState
  target/i386: sev: Remove redundant handle field
  target/i386: sev: Remove redundant policy field
  target/i386: sev: Remove redundant cbitpos and reduced_phys_bits fields
  target/i386: sev: Partial cleanup to sev_state global
  target/i386: sev: Embed SEVState in SevGuestState
  target/i386: sev: Rename QSevGuestInfo
  target/i386: sev: Move local structure definitions into .c file
  target/i386: sev: Remove unused QSevGuestInfoClass
  xen: fix build without pci passthrough
  i386: hvf: Drop HVFX86EmulatorState
  i386: hvf: Move mmio_buf into CPUX86State
  i386: hvf: Move lazy_flags into CPUX86State
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	hw/i386/acpi-build.c
2020-06-12 23:06:22 +01:00
Peter Xu
12fcf49c1a pci: Display PCI IRQ pin in "info pci"
Sometimes it would be good to be able to read the pin number along
with the IRQ number allocated.  Since we'll dump the IRQ number, no
reason to not dump the pin information.  For example, the vfio-pci
device will overwrite the pin with the hardware pin number.  It would
be nice to know the pin number of one assigned device from QMP/HMP.

CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
CC: Julia Suvorova <jusual@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200317195908.283800-1-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
2020-06-12 10:17:06 -04:00
Philippe Mathieu-Daudé
2261d3939f memory: Make 'info mtree' not display disabled regions by default
We might have many disabled memory regions, making the 'info mtree'
output too verbose to be useful.
Remove the disabled regions in the default output, but allow the
monitor user to display them using the '-D' option.

Before:

  (qemu) info mtree
  memory-region: system
    0000000000000000-ffffffffffffffff (prio 0, i/o): system
      0000000000000000-0000000007ffffff (prio 0, ram): alias ram-below-4g @pc.ram 0000000000000000-0000000007ffffff
      0000000000000000-ffffffffffffffff (prio -1, i/o): pci
        00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem
        00000000000c0000-00000000000dffff (prio 1, rom): pc.rom
        00000000000e0000-00000000000fffff (prio 1, rom): alias isa-bios @pc.bios 0000000000020000-000000000003ffff
        00000000fffc0000-00000000ffffffff (prio 0, rom): pc.bios
      00000000000a0000-00000000000bffff (prio 1, i/o): alias smram-region @pci 00000000000a0000-00000000000bffff
      00000000000c0000-00000000000c3fff (prio 1, ram): alias pam-ram @pc.ram 00000000000c0000-00000000000c3fff [disabled]
      00000000000c0000-00000000000c3fff (prio 1, ram): alias pam-pci @pc.ram 00000000000c0000-00000000000c3fff [disabled]
      00000000000c0000-00000000000c3fff (prio 1, ram): alias pam-rom @pc.ram 00000000000c0000-00000000000c3fff [disabled]
      00000000000c0000-00000000000c3fff (prio 1, i/o): alias pam-pci @pci 00000000000c0000-00000000000c3fff
      00000000000c4000-00000000000c7fff (prio 1, ram): alias pam-ram @pc.ram 00000000000c4000-00000000000c7fff [disabled]
      00000000000c4000-00000000000c7fff (prio 1, ram): alias pam-pci @pc.ram 00000000000c4000-00000000000c7fff [disabled]
      00000000000c4000-00000000000c7fff (prio 1, ram): alias pam-rom @pc.ram 00000000000c4000-00000000000c7fff [disabled]
      00000000000c4000-00000000000c7fff (prio 1, i/o): alias pam-pci @pci 00000000000c4000-00000000000c7fff
      00000000000c8000-00000000000cbfff (prio 1, ram): alias pam-ram @pc.ram 00000000000c8000-00000000000cbfff [disabled]
      00000000000c8000-00000000000cbfff (prio 1, ram): alias pam-pci @pc.ram 00000000000c8000-00000000000cbfff [disabled]
      00000000000c8000-00000000000cbfff (prio 1, ram): alias pam-rom @pc.ram 00000000000c8000-00000000000cbfff [disabled]
      00000000000c8000-00000000000cbfff (prio 1, i/o): alias pam-pci @pci 00000000000c8000-00000000000cbfff
      00000000000cc000-00000000000cffff (prio 1, ram): alias pam-ram @pc.ram 00000000000cc000-00000000000cffff [disabled]
      00000000000cc000-00000000000cffff (prio 1, ram): alias pam-pci @pc.ram 00000000000cc000-00000000000cffff [disabled]
      00000000000cc000-00000000000cffff (prio 1, ram): alias pam-rom @pc.ram 00000000000cc000-00000000000cffff [disabled]
      00000000000cc000-00000000000cffff (prio 1, i/o): alias pam-pci @pci 00000000000cc000-00000000000cffff
      00000000000d0000-00000000000d3fff (prio 1, ram): alias pam-ram @pc.ram 00000000000d0000-00000000000d3fff [disabled]
      00000000000d0000-00000000000d3fff (prio 1, ram): alias pam-pci @pc.ram 00000000000d0000-00000000000d3fff [disabled]
      00000000000d0000-00000000000d3fff (prio 1, ram): alias pam-rom @pc.ram 00000000000d0000-00000000000d3fff [disabled]
      00000000000d0000-00000000000d3fff (prio 1, i/o): alias pam-pci @pci 00000000000d0000-00000000000d3fff
      00000000000d4000-00000000000d7fff (prio 1, ram): alias pam-ram @pc.ram 00000000000d4000-00000000000d7fff [disabled]
      00000000000d4000-00000000000d7fff (prio 1, ram): alias pam-pci @pc.ram 00000000000d4000-00000000000d7fff [disabled]
      00000000000d4000-00000000000d7fff (prio 1, ram): alias pam-rom @pc.ram 00000000000d4000-00000000000d7fff [disabled]
      00000000000d4000-00000000000d7fff (prio 1, i/o): alias pam-pci @pci 00000000000d4000-00000000000d7fff
      00000000000d8000-00000000000dbfff (prio 1, ram): alias pam-ram @pc.ram 00000000000d8000-00000000000dbfff [disabled]
      00000000000d8000-00000000000dbfff (prio 1, ram): alias pam-pci @pc.ram 00000000000d8000-00000000000dbfff [disabled]
      00000000000d8000-00000000000dbfff (prio 1, ram): alias pam-rom @pc.ram 00000000000d8000-00000000000dbfff [disabled]
      00000000000d8000-00000000000dbfff (prio 1, i/o): alias pam-pci @pci 00000000000d8000-00000000000dbfff
      00000000000dc000-00000000000dffff (prio 1, ram): alias pam-ram @pc.ram 00000000000dc000-00000000000dffff [disabled]
      00000000000dc000-00000000000dffff (prio 1, ram): alias pam-pci @pc.ram 00000000000dc000-00000000000dffff [disabled]
      00000000000dc000-00000000000dffff (prio 1, ram): alias pam-rom @pc.ram 00000000000dc000-00000000000dffff [disabled]
      00000000000dc000-00000000000dffff (prio 1, i/o): alias pam-pci @pci 00000000000dc000-00000000000dffff
      00000000000e0000-00000000000e3fff (prio 1, ram): alias pam-ram @pc.ram 00000000000e0000-00000000000e3fff [disabled]
      00000000000e0000-00000000000e3fff (prio 1, ram): alias pam-pci @pc.ram 00000000000e0000-00000000000e3fff [disabled]
      00000000000e0000-00000000000e3fff (prio 1, ram): alias pam-rom @pc.ram 00000000000e0000-00000000000e3fff [disabled]
      00000000000e0000-00000000000e3fff (prio 1, i/o): alias pam-pci @pci 00000000000e0000-00000000000e3fff
      00000000000e4000-00000000000e7fff (prio 1, ram): alias pam-ram @pc.ram 00000000000e4000-00000000000e7fff [disabled]
      00000000000e4000-00000000000e7fff (prio 1, ram): alias pam-pci @pc.ram 00000000000e4000-00000000000e7fff [disabled]
      00000000000e4000-00000000000e7fff (prio 1, ram): alias pam-rom @pc.ram 00000000000e4000-00000000000e7fff [disabled]
      00000000000e4000-00000000000e7fff (prio 1, i/o): alias pam-pci @pci 00000000000e4000-00000000000e7fff
      00000000000e8000-00000000000ebfff (prio 1, ram): alias pam-ram @pc.ram 00000000000e8000-00000000000ebfff [disabled]
      00000000000e8000-00000000000ebfff (prio 1, ram): alias pam-pci @pc.ram 00000000000e8000-00000000000ebfff [disabled]
      00000000000e8000-00000000000ebfff (prio 1, ram): alias pam-rom @pc.ram 00000000000e8000-00000000000ebfff [disabled]
      00000000000e8000-00000000000ebfff (prio 1, i/o): alias pam-pci @pci 00000000000e8000-00000000000ebfff
      00000000000ec000-00000000000effff (prio 1, ram): alias pam-ram @pc.ram 00000000000ec000-00000000000effff [disabled]
      00000000000ec000-00000000000effff (prio 1, ram): alias pam-pci @pc.ram 00000000000ec000-00000000000effff [disabled]
      00000000000ec000-00000000000effff (prio 1, ram): alias pam-rom @pc.ram 00000000000ec000-00000000000effff [disabled]
      00000000000ec000-00000000000effff (prio 1, i/o): alias pam-pci @pci 00000000000ec000-00000000000effff
      00000000000f0000-00000000000fffff (prio 1, ram): alias pam-ram @pc.ram 00000000000f0000-00000000000fffff [disabled]
      00000000000f0000-00000000000fffff (prio 1, ram): alias pam-pci @pc.ram 00000000000f0000-00000000000fffff [disabled]
      00000000000f0000-00000000000fffff (prio 1, ram): alias pam-rom @pc.ram 00000000000f0000-00000000000fffff [disabled]
      00000000000f0000-00000000000fffff (prio 1, i/o): alias pam-pci @pci 00000000000f0000-00000000000fffff
      00000000fec00000-00000000fec00fff (prio 0, i/o): ioapic
      00000000fed00000-00000000fed003ff (prio 0, i/o): hpet
      00000000fee00000-00000000feefffff (prio 4096, i/o): apic-msi

After:

  (qemu) info mtree
  memory-region: system
    0000000000000000-ffffffffffffffff (prio 0, i/o): system
      0000000000000000-0000000007ffffff (prio 0, ram): alias ram-below-4g @pc.ram 0000000000000000-0000000007ffffff
      0000000000000000-ffffffffffffffff (prio -1, i/o): pci
        00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem
        00000000000c0000-00000000000dffff (prio 1, rom): pc.rom
        00000000000e0000-00000000000fffff (prio 1, rom): alias isa-bios @pc.bios 0000000000020000-000000000003ffff
        00000000fffc0000-00000000ffffffff (prio 0, rom): pc.bios
      00000000000a0000-00000000000bffff (prio 1, i/o): alias smram-region @pci 00000000000a0000-00000000000bffff
      00000000000c0000-00000000000c3fff (prio 1, i/o): alias pam-pci @pci 00000000000c0000-00000000000c3fff
      00000000000c4000-00000000000c7fff (prio 1, i/o): alias pam-pci @pci 00000000000c4000-00000000000c7fff
      00000000000c8000-00000000000cbfff (prio 1, i/o): alias pam-pci @pci 00000000000c8000-00000000000cbfff
      00000000000cc000-00000000000cffff (prio 1, i/o): alias pam-pci @pci 00000000000cc000-00000000000cffff
      00000000000d0000-00000000000d3fff (prio 1, i/o): alias pam-pci @pci 00000000000d0000-00000000000d3fff
      00000000000d4000-00000000000d7fff (prio 1, i/o): alias pam-pci @pci 00000000000d4000-00000000000d7fff
      00000000000d8000-00000000000dbfff (prio 1, i/o): alias pam-pci @pci 00000000000d8000-00000000000dbfff
      00000000000dc000-00000000000dffff (prio 1, i/o): alias pam-pci @pci 00000000000dc000-00000000000dffff
      00000000000e0000-00000000000e3fff (prio 1, i/o): alias pam-pci @pci 00000000000e0000-00000000000e3fff
      00000000000e4000-00000000000e7fff (prio 1, i/o): alias pam-pci @pci 00000000000e4000-00000000000e7fff
      00000000000e8000-00000000000ebfff (prio 1, i/o): alias pam-pci @pci 00000000000e8000-00000000000ebfff
      00000000000ec000-00000000000effff (prio 1, i/o): alias pam-pci @pci 00000000000ec000-00000000000effff
      00000000000f0000-00000000000fffff (prio 1, i/o): alias pam-pci @pci 00000000000f0000-00000000000fffff
      00000000fec00000-00000000fec00fff (prio 0, i/o): ioapic
      00000000fed00000-00000000fed003ff (prio 0, i/o): hpet
      00000000fee00000-00000000feefffff (prio 4096, i/o): apic-msi

The old behavior is preserved using 'info mtree -D'.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-10 12:10:49 -04:00
Philippe Mathieu-Daudé
688ffbb4f7 various: Remove unnecessary OBJECT() cast
The OBJECT() macro is defined as:

  #define OBJECT(obj) ((Object *)(obj))

Remove the unnecessary OBJECT() casts when we already know the
pointer is of Object type.

Patch created mechanically using spatch with this script:

  @@
  typedef Object;
  Object *o;
  @@
  -   OBJECT(o)
  +   o

Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200512070020.22782-3-f4bug@amsat.org>
[Trivial rebase conflict in hw/s390x/sclp.c resolved]
2020-05-15 07:08:14 +02:00
Markus Armbruster
ddfb0baaf2 qom: Clean up inconsistent use of gchar * vs. char *
Uses of gchar * in qom/object.h:

* ObjectProperty member @name

  Functions that take a property name argument all use char *.  Change
  the member to match.

* ObjectProperty member @type

  Functions that take a property type argument or return it all use
  char *.  Change the member to match.

* ObjectProperty member @description

  Functions that take a property description argument all use char *.
  Change the member to match.

* object_resolve_path_component() parameter @part

  Path components are property names.  Most callers pass char *
  arguments.  Change the parameter to match.  Adjust the few callers
  that pass gchar * to pass char *.

* Return value of object_get_canonical_path_component(),
  object_get_canonical_path()

  Most callers convert their return values right back to char *.
  Change the return value to match.  Adjust the few callers where that
  would add a conversion to gchar * to use char * instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-3-armbru@redhat.com>
2020-05-15 06:26:02 +02:00
Wei Wang
e460a4b1a4 migration/xbzrle: add encoding rate
Users may need to check the xbzrle encoding rate to know if the guest
memory is xbzrle encoding-friendly, and dynamically turn off the
encoding if the encoding rate is low.

Signed-off-by: Yi Sun <yi.y.sun@intel.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Message-Id: <1588208375-19556-1-git-send-email-wei.w.wang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07 17:40:24 +01:00
Keqian Zhu
cbbf818224 migration/throttle: Add cpu-throttle-tailslow migration parameter
At the tail stage of throttling, the Guest is very sensitive to
CPU percentage while the @cpu-throttle-increment is excessive
usually at tail stage.

If this parameter is true, we will compute the ideal CPU percentage
used by the Guest, which may exactly make the dirty rate match the
dirty rate threshold. Then we will choose a smaller throttle increment
between the one specified by @cpu-throttle-increment and the one
generated by ideal CPU percentage.

Therefore, it is compatible to traditional throttling, meanwhile
the throttle increment won't be excessive at tail stage. This may
make migration time longer, and is disabled by default.

Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20200413101508.54793-1-zhukeqian1@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07 17:40:24 +01:00
Mao Zhongyi
7ac5529afb migration: move the units of migrate parameters from milliseconds to ms
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <474bb6cf67defb8be9de5035c11aee57a680557a.1585641083.git.maozhongyi@cmss.chinamobile.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07 17:40:24 +01:00
Mao Zhongyi
f96c6a8736 monitor/hmp-cmds: add hmp_handle_error() for hmp_migrate_set_speed()
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <305323f835436023c53d759f5ab18af3ec874183.1585641083.git.maozhongyi@cmss.chinamobile.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07 17:40:24 +01:00
Daniel Brodsky
6e8a355de6 lockable: replaced locks with lock guard macros where appropriate
- ran regexp "qemu_mutex_lock\(.*\).*\n.*if" to find targets
- replaced result with QEMU_LOCK_GUARD if all unlocks at function end
- replaced result with WITH_QEMU_LOCK_GUARD if unlock not at end

Signed-off-by: Daniel Brodsky <dnbrdsky@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20200404042108.389635-3-dnbrdsky@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-05-04 16:07:43 +01:00
Markus Armbruster
2061487bdb qapi: Disallow qmp_marshal_FOO(NULL, ...)
For QMP commands without arguments, gen_marshal() laboriously
generates a qmp_marshal_FOO() that copes with null @args.  Turns
there's just one caller that passes null instead of an empty QDict.
Adjust that caller, and simplify gen_marshal().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200424084338.26803-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2020-04-30 07:26:41 +02:00
Markus Armbruster
1f5842487a qapi: Only input visitors can actually fail
The previous few commits have made this more obvious, and removed the
one exception.  Time to clarify the documentation, and drop dead error
checking.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-13-armbru@redhat.com>
2020-04-30 07:26:40 +02:00
Mao Zhongyi
7cd75cbdb8 migration: use "" instead of (null) for tls-authz
run:
(qemu) info migrate_parameters
announce-initial: 50 ms
...
announce-max: 550 ms
multifd-compression: none
xbzrle-cache-size: 4194304
max-postcopy-bandwidth: 0
 tls-authz: '(null)'

Migration parameter 'tls-authz' is used to provide the QOM ID
of a QAuthZ subclass instance that provides the access control
check, default is NULL. But the empty string is not a valid
object ID, so use "" instead of the default. Although it will
fail when lookup an object with ID "", it is harmless, just
consistent with tls_creds.

As a bonus, this patch also fixed the bad indentation on the
last line and removed 'has_tls_authz' redundant check in
'hmp_info_migrate_parameters'.

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <119f539a9f4d198bc3bcced46b8280520d60bc51.1585100802.git.maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-25 12:31:38 +00:00
Dr. David Alan Gilbert
d4ff109373 hmp/vnc: Fix info vnc list leak
We're iterating the list, and then freeing the iteration pointer rather
than the list head.

Fixes: 0a9667ecdb ("hmp: Update info vnc")
Reported-by: Coverity (CID 1421932)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200323120822.51266-1-dgilbert@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-25 12:31:38 +00:00
Mao Zhongyi
06b1c6f8b7 xbzrle: update xbzrle doc
Add new parameter description, also:
1. Remove unsociable space.
2. Nit picking: s/two/2 in report

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20200320143216.423374-1-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-25 12:31:38 +00:00
Pan Nengyuan
33ee3d96c7 hmp-cmd: fix a missing_break warning
This fix coverity issues 94417686:
    1260        break;
    CID 94417686: (MISSING_BREAK)
    1261. unterminated_case: The case for value "MIGRATION_PARAMETER_THROTTLE_TRIGGER_THRESHOLD" is not terminated by a 'break' statement.
    1261    case MIGRATION_PARAMETER_THROTTLE_TRIGGER_THRESHOLD:
    1262        p->has_throttle_trigger_threshold = true;
    1263        visit_type_int(v, param, &p->throttle_trigger_threshold, &err);
    1264    case MIGRATION_PARAMETER_CPU_THROTTLE_INITIAL:

Fixes: dc14a47076
Fixes: Coverity (CID 1421950)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200318071620.59748-1-pannengyuan@huawei.com>
Reviewed-by: Keqian Zhu <zhukeqian1@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-25 12:31:38 +00:00
Eric Blake
08712fcb85 net: Track netdevs in NetClientState rather than QemuOpt
As mentioned in the previous patch, our use of QemuOpt group "netdev"
has two purposes: collect the CLI arguments, and serve as a witness
for monitor hotplug actions.  As the latter didn't use anything but an
id, it felt rather unclean to have to touch QemuOpts at all when going
through QMP, so let's instead track things with a bool field in
NetClientState.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317201711.322764-3-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-03-17 21:50:36 +01:00
Eric Blake
db2a380c84 net: Complete qapi-fication of netdev_add
We've had all the required pieces for doing a type-safe representation
of netdev_add as a flat union for quite some time now (since
0e55c381f6 in v2.7.0, released in 2016), but did not make the final
switch to using it because of concern about whether a command-line
regression in accepting "1" in place of 1 for integer arguments would
be problematic.  Back then, we did not have the deprecation cycle to
allow us to make progress.  But now that we have waited so long, other
problems have crept in: for example, our desire to add
qemu-storage-daemon is hampered by the inability to express net
objects, and we are unable to introspect what we actually accept.
Additionally, our round-trip through QemuOpts silently eats any
argument that expands to an array, rendering dnssearch, hostfwd, and
guestfwd useless through QMP:

{"execute": "netdev_add", "arguments": { "id": "netdev0",
  "type": "user", "dnssearch": [
    { "str": "8.8.8.8" }, { "str": "8.8.4.4" }
  ]}}

So without further ado, let's turn on proper QAPI.  netdev_add() was a
trivial wrapper around net_client_init(), which did a few steps prior
to calling net_client_init1(); with this patch, we now skip directly
to net_client_init1().  In addition to fixing array parameters, the
following additional differences occur:

-  {"execute": "netdev_add", "arguments": {"type": "help"}}
no longer attempts to print help to stdout and exit.  Bug fix, broken
in 547203ead4 'net: List available netdevs with "-netdev help"',
v2.12.0.

-  {"execute": "netdev_add", "arguments': {... "ipv6-net": "..." }}
no longer attempts to desugar the undocumented ipv6-net magic string
into the proper "ipv6-prefix" and "ipv6-prefixlen".  Undocumented
misfeature, introduced in commit 7aac531ef2 "qapi-schema, qemu-options
& slirp: Adding Qemu options for IPv6 addresses", v2.6.0.

-  {'execute':'netdev_add',
     'arguments':{'id':'net2', 'type':'hubport', 'hubid':"2"}}
   {"error": {"class": "GenericError", "desc": "Invalid parameter type for 'hubid', expected: integer"}}
Used to succeed: since our command line treats everything as strings,
our not-so-round-trip conversion from QAPI -> QemuOpts -> QAPI lost
the original typing and turned everything into a string; now that we
skip the QemuOpts, the JSON input has to match the exact QAPI type.
But this stricter QMP is desirable, and introspection is sufficient
for any affected applications to make sure they use it correctly.

In qmp_netdev_add(), we still have to create a QemuOpts object so that
qmp_netdev_del() will be able to remove a hotplugged network device;
but the opts->head remains empty since we now manage all parsing
through the QAPI object rather than QemuOpts; a separate patch will
address the abuse of QemuOpts as a witness for whether a
NetClientState is a netdev.  In the meantime, our argument that we are
okay requires auditing all uses of option group "netdev":

- qemu_netdev_opts: option group definition, empty .desc[]
- CLI (CLI netdev parsing ends before monitors start, so while
  monitors can mess with CLI netdevs, CLI cannot mess with
  monitor netdevs):
  - main() case QEMU_OPTION_netdev: store CLI definition
  - main() case QEMU_OPTION_readconfig, case QEMU_OPTION_writeconfig:
  similar, dealing only with CLI
  - net_init_clients(): Pass CLI to net_client_init()
- Monitor:
  - hmp_netdev_add(): straightforward parse into net_client_init()
  - qmp_netdev_add(): subject of this patch, used to add full
  object to option group, now just adds bare-bones id
  - qmp_netdev_del(), netdev_del_completion(): check the option group
  solely for id, as a 'is this a netdev' predicate

Reported-by: Alex Kirillov <lekiravi@yandex-team.ru>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317201711.322764-2-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message typo fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-03-17 21:50:14 +01:00
Marc-André Lureau
f0ccc00be1 qmp: constify QmpCommand and list
Since 0b69f6f72c "qapi: remove
qmp_unregister_command()", the command list can be declared const.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20200316171824.2319695-1-marcandre.lureau@redhat.com>
[Rebased]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-03-17 21:43:12 +01:00
Keqian Zhu
dc14a47076 migration/throttle: Add throttle-trig-thres migration parameter
Currently, if the bytes_dirty_period is more than the 50% of
bytes_xfer_period, we start or increase throttling.

If we make this percentage higher, then we can tolerate higher
dirty rate during migration, which means less impact on guest.
The side effect of higher percentage is longer migration time.
We can make this parameter configurable to switch between mig-
ration time first or guest performance first.

The default value is 50 and valid range is 1 to 100.

Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20200224023142.39360-1-zhukeqian1@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-13 09:36:30 +00:00
Maxim Levitsky
2bcad73c4b monitor/hmp: move hmp_info_block* to block-hmp-cmds.c
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200308092440.23564-11-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-09 18:20:21 +00:00
Maxim Levitsky
1061f8dd80 monitor/hmp: move remaining hmp_block* functions to block-hmp-cmds.c
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200308092440.23564-10-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-09 18:20:13 +00:00
Maxim Levitsky
e263120ecc monitor/hmp: move hmp_nbd_server* to block-hmp-cmds.c
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200308092440.23564-9-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-09 18:17:58 +00:00
Maxim Levitsky
fce2b91fdf monitor/hmp: move hmp_snapshot_* to block-hmp-cmds.c
hmp_snapshot_blkdev is from GPLv2 version of the hmp-cmds.c thus
have to change the licence to GPLv2

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200308092440.23564-8-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-09 18:07:50 +00:00
Maxim Levitsky
6b7fbf61fb monitor/hmp: move hmp_block_job* to block-hmp-cmds.c
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200308092440.23564-7-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-09 18:07:48 +00:00
Maxim Levitsky
0932e3f23d monitor/hmp: move hmp_drive_mirror and hmp_drive_backup to block-hmp-cmds.c
Moved code was added after 2012-01-13, thus under GPLv2+

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200308092440.23564-6-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  Fixed commit message
2020-03-09 18:07:35 +00:00
Maxim Levitsky
a2dde2f221 monitor/hmp: rename device-hotplug.c to block/monitor/block-hmp-cmds.c
These days device-hotplug.c only contains the hmp_drive_add
In the next patch, rest of hmp_drive* functions will be moved
there.

Also add block-hmp-cmds.h to contain prototypes of these
functions

License for block-hmp-cmds.h since it contains the code
moved from sysemu.h which lacks license and thus according
to LICENSE is under GPLv2+

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200308092440.23564-4-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-09 18:05:31 +00:00
Chen Qun
916c92503b monitor/hmp-cmds: Remove redundant statement in hmp_rocker_of_dpa_groups()
Clang static code analyzer show warning:
monitor/hmp-cmds.c:2867:17: warning: Value stored to 'set' is never read
                set = true;
                ^     ~~~~

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200302130715.29440-14-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-03-09 15:59:31 +01:00
Kevin Wolf
2af282ec51 qemu-storage-daemon: Add --monitor option
This adds and parses the --monitor option, so that a QMP monitor can be
used in the storage daemon. The monitor offers commands defined in the
QAPI schema at storage-daemon/qapi/qapi-schema.json.

The --monitor options currently allows to create multiple monitors with
the same ID. This part of the interface is considered unstable. We will
reject such configurations as soon as we have a design for the monitor
subsystem to perform these checks. (In the system emulator, we depend on
QemuOpts rejecting duplicate IDs.)

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-21-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:28 +01:00
Kevin Wolf
a2f411c467 monitor: Add allow_hmp parameter to monitor_init()
Add a new parameter allow_hmp to monitor_init() so that the storage
daemon can disable HMP.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-20-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:28 +01:00
Kevin Wolf
8e9119a807 hmp: Fail gracefully if chardev is already in use
Trying to attach a HMP monitor to a chardev that is already in use
results in a crash because monitor_init_hmp() passes &error_abort to
qemu_chr_fe_init():

$ ./x86_64-softmmu/qemu-system-x86_64 --chardev stdio,id=foo --mon foo --mon foo
QEMU 4.2.50 monitor - type 'help' for more information
(qemu) Unexpected error in qemu_chr_fe_init() at chardev/char-fe.c:220:
qemu-system-x86_64: --mon foo: Device 'foo' is in use
Abgebrochen (Speicherabzug geschrieben)

Fix this by allowing monitor_init_hmp() to return an error and passing
any error in qemu_chr_fe_init() to its caller instead of aborting.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-19-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:28 +01:00
Kevin Wolf
f27a9bb3e9 qmp: Fail gracefully if chardev is already in use
Trying to attach a QMP monitor to a chardev that is already in use
results in a crash because monitor_init_qmp() passes &error_abort to
qemu_chr_fe_init():

$ ./x86_64-softmmu/qemu-system-x86_64 --chardev stdio,id=foo --mon foo,mode=control --mon foo,mode=control
Unexpected error in qemu_chr_fe_init() at chardev/char-fe.c:220:
qemu-system-x86_64: --mon foo,mode=control: Device 'foo' is in use
Abgebrochen (Speicherabzug geschrieben)

Fix this by allowing monitor_init_qmp() to return an error and passing
any error in qemu_chr_fe_init() to its caller instead of aborting.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-18-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:28 +01:00
Kevin Wolf
f2098725aa monitor: Create QAPIfied monitor_init()
This adds a new QAPI-based monitor_init() function. The existing
monitor_init_opts() is rewritten to simply put its QemuOpts parameter
into a visitor and pass the resulting QAPI object to monitor_init().

This will cause some change in those error messages for the monitor
options in the system emulator that are now generated by the visitor
rather than explicitly checked in monitor_init_opts().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-17-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:28 +01:00
Kevin Wolf
c62d24e906 blockdev-nbd: Boxed argument type for nbd-server-add
Move the arguments of nbd-server-add to a new struct BlockExportNbd and
convert the command to 'boxed': true. This makes it easier to share code
with the storage daemon.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-11-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:28 +01:00
Kevin Wolf
5f07c4d60d qapi: Flatten object-add
Mapping object-add to the command line as is doesn't result in nice
syntax because of the nesting introduced with 'props'. This becomes
nicer and more consistent with device_add and netdev_add when we accept
properties for the object on the top level instead.

'props' is still accepted after this patch, but marked as deprecated.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-8-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:27 +01:00
Kevin Wolf
5a16818b45 block: Move sysemu QMP commands to QAPI block module
QMP commands that are related to the system emulator and don't make
sense in the context of tools such as qemu-storage-daemon should live in
qapi/block.json rather than qapi/block-core.json. Move them there.

The associated data types are actually also used in code shared with the
tools, so they stay in block-core.json.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-6-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:15:38 +01:00
Juan Quintela
6a9ad15420 multifd: Add multifd-zstd-level parameter
This parameter specifies the zstd compression level. The next patch
will put it to use.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
2020-02-28 09:25:28 +01:00
Juan Quintela
9004db48c0 multifd: Add multifd-zlib-level parameter
This parameter specifies the zlib compression level. The next patch
will put it to use.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-28 09:24:43 +01:00
Juan Quintela
96eef04238 multifd: Add multifd-compression parameter
This will store the compression method to use.  We start with none.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

---

Rename multifd-method to multifd-compression
2020-02-28 09:24:43 +01:00
Peter Krempa
facda5443f qapi: Allow getting flat output from 'query-named-block-nodes'
When a management application manages node names there's no reason to
recurse into backing images in the output of query-named-block-nodes.

Add a parameter to the command which will return just the top level
structs.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <4470f8c779abc404dcf65e375db195cd91a80651.1579509782.git.pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[mreitz: Fixed coding style]
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-02-20 16:43:42 +01:00
Kevin Wolf
7d3f505359 monitor: Move qmp_query_qmp_schema to qmp-cmds-control.c
monitor/misc.c contains code that works only in the system emulator, so
it can't be linked to tools like a storage daemon. In order to make
schema introspection available for tools, move the function to
monitor/qmp-cmds-control.c, which can be linked into the storage daemon.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-5-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-17 13:53:47 +01:00