This includes a new section that for now just stores the current qemu state.
Right now, there are only one way to control what is the state of the
target after migration.
- If you run the target qemu with -S, it would start stopped.
- If you run the target qemu without -S, it would run just after migration finishes.
The problem here is what happens if we start the target without -S and
there happens one error during migration that puts current state as
-EIO. Migration would ends (notice that the error happend doing block
IO, network IO, i.e. nothing related with migration), and when
migration finish, we would just "continue" running on destination,
probably hanging the guest/corruption data, whatever.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Next commit would allow to move from incoming migration to error happening on source.
Should we add more states to this transition? Luiz?
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This allows us to store the current state to send it through migration.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
I forgot to add compatibility for Power when adding section footers.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: 37fb569c01
Signed-off-by: Juan Quintela <quintela@redhat.com>
If the number of RAMBlocks was different on the source from the
destination, QEMU would hang waiting for a disconnect on the source
and wouldn't release from that hang until the destination was manually
killed.
Mark the stream as being in error, this causes the destination to die
and the source to carry on.
(It still gets a whole bunch of warnings on the destination, and I've
not managed to complete another migration after the 1st one, still
progress).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Perform some basic (but probably not complete) sanity checking on
requests from the RDMA source.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Use the order of incoming RAMBlocks from the source to record
an index number; that then allows us to sort the destination
local RAMBlock list to match the source.
Now that the RAMBlocks are known to be in the same order, this
simplifies the RDMA Registration step which previously tried to
match RAMBlocks based on offset (which isn't guaranteed to match).
Looking at the existing compress code, I think it was erroneously
relying on an assumption of matching ordering, which this fixes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
RDMA uses a hash from block offset->RAM Block; this isn't needed
on the destination, and it becomes harder to maintain after the next
patch in the series that sorts the block list.
Split the hash so that it's only generated on the source.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In the next patch we remove the hash on the destination,
rdma_delete_block does two things with the hash which can be avoided:
a) The caller passes the offset and rdma_delete_block looks it up
in the hash; fixed by getting the caller to pass the block
b) The hash gets recreated after deletion; fixed by making that
conditional on the hash being initialised.
While this function is currently only used during cleanup, Michael
asked that we keep it general for future dynamic block registration
work.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We need the names of RAMBlocks as they're loaded for RDMA,
reuse a slightly modified ram_control_load_hook:
a) Pass a 'data' parameter to use for the name in the block-reg
case
b) Only some hook types now require the presence of a hook function.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The 'offset' field in RDMACompress and 'current_addr' field
in RDMARegister are commented as being offsets within a particular
RAMBlock, however they appear to actually be offsets within the
ram_addr_t space.
The code currently assumes that the offsets on the source/destination
match, this change removes the need for the assumption for these
structures by translating the addresses into the ram_addr_t space of
the destination host.
Note: An alternative would be to change the fields to actually
take the data they're commented for; this would potentially be
simpler but would break stream compatibility for those cases
that currently work.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In a later patch the block name will be used to match up two views
of the block list. Keep a copy of the block name with the local block
list.
(At some point it could be argued that it would be best just to let
migration see the innards of RAMBlock and avoid the need to use
foreach).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The VMDescription section maybe after the EOF mark, the current code
does a 'qemu_get_byte' and either gets the header byte identifying the
description or an error (which it ignores). Doing the 'get' upsets
RDMA which hangs on old machine types without the VMDescription.
Just avoid reading the VMDescription if we wouldn't send it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Variable "r" going out of scope leaks the storage
it points to in line 3268.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
it through the "smm" property of x86 machine types.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJVmq+hAAoJEL/70l94x66DKvMH/0bI2foGOmsJq6UtsRXzYXu8
rX2BEVBNHIS0acfzmBAkM+VYCEiZMHCqYubgSDvlhl2sqzSO6s+2EoWmXuS+Sln6
4lFW/YaKsbY9eN8UL/51zLI1SYj7SEUsqRS+r+1oLUxv5/v90K2xW2cvMnJFIWxk
NZruZLXhHv3U4VqIR63yV97NFyXvgvlVmpA4btLcJnqRey9QKSSvCAdUIOxPr5Iz
rHIWn4xepqzewk86wAoascDEFI504K8Vj0lZclkHXTl6QAmdCOzmjMLvpsJYUSmZ
RcOMMlZNWWmZyRk0sSX2k26hLi8rZnwaKdvqemNQFTxiM7ijBD2DgJ5YM+VDxR8=
=uKqs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream-smm' into staging
This series implements KVM support for SMM, and lets you enable/disable
it through the "smm" property of x86 machine types.
# gpg: Signature made Mon Jul 6 17:41:05 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream-smm:
pc: add SMM property
ich9: add smm_enabled field and arguments
pc_piix: rename kvm_enabled to smm_enabled
target-i386: register a separate KVM address space including SMRAM regions
kvm-all: kvm_irqchip_create is not expected to fail
kvm-all: add support for multiple address spaces
kvm-all: make KVM's memory listener more generic
kvm-all: move internal types to kvm_int.h
kvm-all: remove useless typedef
kvm-all: put kvm_mem_flags to more work
target-i386: add support for SMBASE MSR and SMIs
piix4/ich9: do not raise SMI on ACPI enable/disable commands
linux-headers: Update to 4.2-rc1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix pba_offset initialization value for Chelsio T5 Virtual Function
device. The T5 hardware has a bug in it where it reports a Pending Interrupt
Bit Array Offset of 0x8000 for its SR-IOV Virtual Functions instead
of the 0x1000 that the hardware actually uses internally. As the hardware
doesn't return the correct pba_offset value, add a quirk to instead
return a hardcoded value of 0x1000 when a Chelsio T5 VF device is
detected.
This bug has been fixed in the Chelsio's next chip series T6 but there are
no plans to respin the T5 ASIC for this bug. It is just documented in the
T5 Errata and left it at that.
Signed-off-by: Gabriel Laupre <glaupre@chelsio.com>
Reviewed-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
On systems with guest visible IOMMU, adding a new memory region onto
PCI bus calls vfio_listener_region_add() for every DMA window. This
installs a notifier for IOMMU memory regions. The notifier is supposed
to be removed vfio_listener_region_del(), however in the case of mixed
PHB (emulated + VFIO devices) when last VFIO device is unplugged and
container gets destroyed, all existing DMA windows stay alive altogether
with the notifiers which are on the linked list which head was in
the destroyed container.
This unregisters IOMMU memory region notifier when a container is
destroyed.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch aims at optimizing IRQ handling using irqfd framework.
Instead of handling the eventfds on user-side they are handled on
kernel side using
- the KVM irqfd framework,
- the VFIO driver virqfd framework.
the virtual IRQ completion is trapped at interrupt controller
This removes the need for fast/slow path swap.
Overall this brings significant performance improvements.
Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Commit f41389ae3c introduced kvm_resamplefds_enabled() and
associated kvm_resamplefds_allowed boolean. This patch adds
non-KVM version for kvm_resamplefds_enabled and also declares
kvm_resamplefds_allowed in kvm-stub as it is done for fellow
kvm_irqfds_allowed.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add a new connect_irq_notifier notifier in the SysBusDeviceClass. This
notifier, if populated, is called after sysbus_connect_irq.
This mechanism is used to setup VFIO signaling once VFIO platform
devices get attached to their platform bus, on a machine init done
notifier.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The arm_gic_kvm now calls kvm_irqchip_set_qemuirq_gsi to build
the hash table storing qemu_irq/gsi mappings. From that point on
irqfd can be setup directly from the qemu_irq using
kvm_irqchip_add_irqfd_notifier.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
VFIO platform device needs to setup irqfd but it does not know the
gsi corresponding to the device qemu_irq. This patch proposes to
store a hash table in kvm_state using the qemu_irq as key and the gsi
as a value.
kvm_irqchip_set_qemuirq_gsi allows to insert such a pair. The interrupt
controller is supposed to use it.
kvm_irqchip_[add, remove]_irqfd_notifier allows to setup/tear down
irqfd directly from the qemu_irq.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Anticipating for the introduction of new add/remove functions taking
a qemu_irq parameter, let's rename existing ones with a gsi suffix.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is system level code, and should only depend on the host page
size, not the target page size.
Note that HOST_PAGE_SIZE is misleadingly lead and is really aligning
to both host and target page size. Hence it's replacement with
REAL_HOST_PAGE_SIZE.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently the "host" page size alignment API is really aligning to both
host and target page sizes. There is the qemu_real_page_size which can
be used for the actual host page size but it's missing a mask and ALIGN
macro as provided for qemu_page_size. Complete the API. This allows
system level code that cares about the host page size to use a
consistent alignment interface without having to un-needingly align to
the target page size. This also reduces system level code dependency
on the cpu specific TARGET_PAGE_SIZE.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
size_t is an unsigned type, thus the error case is never reached in
the below call to pread. If bytes is negative, it will be seen as
a very high positive value.
Spotted by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The property can take values on, off or auto. The default is "off"
for KVM and pre-2.4 machines, otherwise "auto" (which makes it
available on TCG or on new-enough kernels).
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Q35's ACPI device is hard-coding SMM availability to KVM. Place the
logic where the board is created instead, so that it will be possible
to override it.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will enable SMM even if KVM is in use. Rename the field and
arguments.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_CREATE_IRQCHIP should never fail, and so should its userspace
wrapper kvm_irqchip_create. The function does not do anything
if the irqchip capability is not available, as is the case for PPC.
With this patch, kvm_arch_init can allocate memory and it will not
be leaked.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make kvm_memory_listener_register public, and assign a kernel
address space id to each KVMMemoryListener.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No semantic change, but s->slots moves into a new struct
KVMMemoryListener. KVM's memory listener becomes a member of struct
KVMState, and becomes of type KVMMemoryListener.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
i386 code will have to define a different KVMMemoryListener. Create
an internal header so that KVMSlot is not exposed outside.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently kvm_mem_flags just translates bools to bits, let's
make it also determine the bools first. This avoids its parameter
list growing each time we add a flag.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Apart from the MSR, the smi field of struct kvm_vcpu_events has to be
translated into the corresponding CPUX86State fields. Also,
memory transaction flags depend on SMM state, so pull it from struct
kvm_run on every exit from KVM to userspace.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These commands are handled entirely by QEMU. Do not raise an SMI
when they happen, because Windows (at least 2008r2) expects these
commands to work and (depending on the value of APMC_EN at
startup) the firmware might not have installed an SMI handler.
When this happens (e.g. the kernel supports SMIs, or you are using
TCG, but you have used "-machine smm=off") RIP is moved to 0x38000
where there is no code to execute.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This updates linux-headers against master 4.2-rc1 (commit
d770e558e21961ad6cfdf0ff7df0eb5d7d4f0754). This is the result of
./scripts/update-linux-headers.sh work.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* unlocked MMIO support in KVM
* support for compilation with ICC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVmnuoAAoJEL/70l94x66DKTUH/RFrc20KXRkn/Pb/8qHY/wFz
Wt3YaS5VYPHElHbxHSdpwlV3K50FAX4QaC25Dnw4dsTelyxe5k7od+I7x8PQxD9v
3N+mFFF1BV6PqXTPVnUCnb14EXprJX524E97O6Z3lDGcwSLHDxeveSCk3IvMFErz
JzP3vtigSvtdPPQXlGcndP/r1EXeVjgNIsZ+NKaI/kmoSz1fHFrCN8hTnrxA9RSI
ZPhfmgHI5EMFtAf/HiZID6GSHOHajgeRT2bIiiy1okS++no0uRZlVMvcnFNPZHoG
e9XCGBXJSdmCoi7sIgShXirKszxYkRTbCyxxjz6aYfhrQzo0h+Yn9OPuvQrgynE=
=+YEv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* more of Peter Crosthwaite's multiarch preparation patches
* unlocked MMIO support in KVM
* support for compilation with ICC
# gpg: Signature made Mon Jul 6 13:59:20 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
exec: skip MMIO regions correctly in cpu_physical_memory_write_rom_internal
Stop including qemu-common.h in memory.h
kvm: Switch to unlocked MMIO
acpi: mark PMTIMER as unlocked
kvm: Switch to unlocked PIO
kvm: First step to push iothread lock out of inner run loop
memory: let address_space_rw/ld*/st* run outside the BQL
exec: pull qemu_flush_coalesced_mmio_buffer() into address_space_rw/ld*/st*
memory: Add global-locking property to memory regions
main-loop: introduce qemu_mutex_iothread_locked
main-loop: use qemu_mutex_lock_iothread consistently
Fix irq route entries exceeding KVM_MAX_IRQ_ROUTES
cpu-defs: Move out TB_JMP defines
include/exec: Move tb hash functions out
include/exec: Move standard exceptions to cpu-all.h
cpu-defs: Move CPU_TEMP_BUF_NLONGS to tcg
memory_mapping: Rework cpu related includes
cutils: allow compilation with icc
qemu-common: add VEC_OR macro
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Loading the BIOS in the mac99 machine is interesting, because there is a
PROM in the middle of the BIOS region (from 16K to 32K). Before memory
region accesses were clamped, when QEMU was asked to load a BIOS from
0xfff00000 to 0xffffffff it would put even those 16K from the BIOS file
into the region. This is weird because those 16K were not actually
visible between 0xfff04000 and 0xfff07fff. However, it worked.
After clamping was added, this also worked. In this case, the
cpu_physical_memory_write_rom_internal function split the write in
three parts: the first 16K were copied, the PROM area (second 16K) were
ignored, then the rest was copied.
Problems then started with commit 965eb2f (exec: do not clamp accesses
to MMIO regions, 2015-06-17). Clamping accesses is not done for MMIO
regions because they can overlap wildly, and MMIO registers can be
expected to perform full-width accesses based only on their address
(with no respect for adjacent registers that could decode to completely
different MemoryRegions). However, this lack of clamping also applied
to the PROM area! cpu_physical_memory_write_rom_internal thus failed
to copy the third range above, i.e. only copied the first 16K of the BIOS.
In effect, address_space_translate is expecting _something else_ to do
the clamping for MMIO regions if the incoming length is large. This
"something else" is memory_access_size in the case of address_space_rw,
so use the same logic in cpu_physical_memory_write_rom_internal.
Reported-by: Alexander Graf <agraf@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Fixes: 965eb2f
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Including qemu-common.h from other header files is generally a bad
idea, because it means it's very easy to end up with a circular
dependency. For instance, if we wanted to include memory.h from
qom/cpu.h we'd end up with this loop:
memory.h -> qemu-common.h -> cpu.h -> cpu-qom.h -> qom/cpu.h -> memory.h
Remove the include from memory.h. This requires us to fix up a few
other files which were inadvertently getting declarations indirectly
through memory.h.
The biggest change is splitting the fprintf_function typedef out
into its own header so other headers can get at it without having
to include qemu-common.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1435933104-15216-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to different gdb overlay organization between windowed/call0
configurations core import script doesn't always work correctly.
Simplify the script: always copy complete gdb register map from overlay,
count registers at core registerstion time. Update existing cores.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Xtensa ISA got specification for 64-bit floating point registers and
opcodes, see ISA, 4.3.11 "Floating point coprocessor option".
Add 64-bit FP registers.
Although 64-bit floating point is currently not supported by xtensa
translator, these registers need to be reported to gdb with proper size,
otherwise it wouldn't find other registers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* TLBI ALLEI1IS should operate on all CPUs, not just this one
* Fix interval interrupt of cadence ttc in decrement mode
* Implement YIELD insn to yield in ARM and Thumb translators
* ARM GIC: reset all registers
* arm_mptimer: fix timer shutdown and mode change
* arm_mptimer: respect IT bit state
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABCAAGBQJVmlFDAAoJEDwlJe0UNgze9y8P/1dOW0fITZo9Ld3fIVqJL4lK
9Ihkq9FzCrui0XYoXoP7VBD3qGJE6KdICP1IMvvyEEbgbnMMRa0yXL3pwODRxV0Q
8qNlH4HZyzxYUuT+lHTs7YLgPOOi+UFE/i7ekQBlmdLwBdYvohQAJzjRTMrfLtnv
SmB/I+Q5dIp/5FMe2hk1sUZslejMhr/ErDtiFa4w5jEYqHzsPiXlUytVhFIQ7UQI
4OZpQ6SHG65AsnehUp79HPhBSrBpT18j61w3aUYmkn0ENIo1JQdsdoGx09dK6HHF
tvQG2sKus0VJmiBJxFN8Rth+pFGyJTeZztTGodU+DlqXl09AykBXMZ6FG4VZLMo5
zw2nK22dBIfMO8suRdYZ6Fk3V4MUoiASrItQp/QuflW2oKHc/gF0/RFX6KkFYdqG
UJhQA0Kx/rQzMeNcMwQVZh4jLQtdh9dbRFmY0Lf23BY5+mDfRx1+Z/wSXEc3eSH7
Y7KnjETfkJ21Xf5E+69Aud8yt5puiMywu0/EP03ihl/THMyKiSiVLzRh0sKNTp2j
O5neBiypDusqG3dvUYXDWg5y7BO3IoTUtBPkTgKpEe3LaN8g7WkglMmfHeEQeLp2
cXXrhfZ/mbnW4x6Jd+xJIjUEBcS3prr1Exa9p9+9lvV7fJSoS7MVBD4bRWMe5FvX
BGktZFm/DGdUSkxL3gne
=bBka
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20150706' into staging
target-arm queue:
* TLBI ALLEI1IS should operate on all CPUs, not just this one
* Fix interval interrupt of cadence ttc in decrement mode
* Implement YIELD insn to yield in ARM and Thumb translators
* ARM GIC: reset all registers
* arm_mptimer: fix timer shutdown and mode change
* arm_mptimer: respect IT bit state
# gpg: Signature made Mon Jul 6 10:58:27 2015 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20150706:
arm_mptimer: Respect IT bit state
arm_mptimer: Fix timer shutdown and mode change
hw/intc/arm_gic_common.c: Reset all registers
target-arm: Implement YIELD insn to yield in ARM and Thumb translators
target-arm: Split DISAS_YIELD from DISAS_WFE
Fix interval interrupt of cadence ttc when timer is in decrement mode
target-arm: fix write helper for TLBI ALLE1IS
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The timer should fire the interrupt only if the IT (interrupt enable) bit
state of the control register is enabled.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The running timer can't be stopped because timer control code just
doesn't handle disabling the timer. Fix it by deleting the timer if
the enable bit is cleared.
The timer won't start periodic ticking if a ONE-SHOT -> PERIODIC mode
change happens after a one-shot tick was completed. Fix it by
re-starting ticking if the timer isn't ticking right now.
To avoid code churning, these two fixes are squashed in one commit.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
