We are about to remove the CRIS target, so remove
the sysemu part. This remove the CRIS 'none' machine.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-13-philmd@linaro.org>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
VfioMigrationState has a 'prefix' that overrides the generated
enumeration constants' prefix to QAPI_VFIO_MIGRATION_STATE.
We could simply drop 'prefix', but then the enumeration constants
would look as if they came from kernel header linux/vfio.h.
Rename the type to QapiVfioMigrationState instead, so that 'prefix' is
not needed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240904111836.3273842-20-armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptodevBackendAlgType has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTODEV_BACKEND_ALG.
We could simply drop 'prefix', but I think the abbreviation "alg" is
less than clear.
Additionally rename the type to QCryptodevBackendAlgoType. The prefix
becomes QCRYPTODEV_BACKEND_ALGO_TYPE.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-19-armbru@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptodevBackendServiceType has a 'prefix' that overrides the
generated enumeration constants' prefix to QCRYPTODEV_BACKEND_SERVICE.
Drop it. The prefix becomes QCRYPTODEV_BACKEND_SERVICE_TYPE.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-18-armbru@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoRSAPaddingAlgorithm has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_RSA_PADDING_ALG.
We could simply drop 'prefix', but then the prefix becomes
QCRYPTO_RSA_PADDING_ALGORITHM, which is rather long.
We could additionally rename the type to QCryptoRSAPaddingAlg, but I
think the abbreviation "alg" is less than clear.
Rename the type to QCryptoRSAPaddingAlgo instead. The prefix becomes
QCRYPTO_RSA_PADDING_ALGO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-16-armbru@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoAkCipherAlgorithm has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_AKCIPHER_ALG.
We could simply drop 'prefix', but then the prefix becomes
QCRYPTO_AK_CIPHER_ALGORITHM, which is rather long.
We could additionally rename the type to QCryptoAkCipherAlg, but I
think the abbreviation "alg" is less than clear.
Rename the type to QCryptoAkCipherAlgo instead. The prefix becomes
QCRYPTO_AK_CIPHER_ALGO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-15-armbru@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoIVGenAlgorithm has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_IVGEN_ALG.
We could simply drop 'prefix', but then the prefix becomes
QCRYPTO_IV_GEN_ALGORITHM, which is rather long.
We could additionally rename the type to QCryptoIVGenAlg, but I think
the abbreviation "alg" is less than clear.
Rename the type to QCryptoIVGenAlgo instead. The prefix becomes
QCRYPTO_IV_GEN_ALGO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-14-armbru@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoCipherAlgorithm has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_CIPHER_ALG.
We could simply drop 'prefix', but then the prefix becomes
QCRYPTO_CIPHER_ALGORITHM, which is rather long.
We could additionally rename the type to QCryptoCipherAlg, but I think
the abbreviation "alg" is less than clear.
Rename the type to QCryptoCipherAlgo instead. The prefix becomes
QCRYPTO_CIPHER_ALGO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-13-armbru@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoHashAlgorithm has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_HASH_ALG.
We could simply drop 'prefix', but then the prefix becomes
QCRYPTO_HASH_ALGORITHM, which is rather long.
We could additionally rename the type to QCryptoHashAlg, but I think
the abbreviation "alg" is less than clear.
Rename the type to QCryptoHashAlgo instead. The prefix becomes to
QCRYPTO_HASH_ALGO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-12-armbru@redhat.com>
[Conflicts with merge commit 7bbadc60b5 resolved]
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoAkCipherKeyType has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_AKCIPHER_KEY_TYPE.
Drop it. The prefix becomes QCRYPTO_AK_CIPHER_KEY_TYPE.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-11-armbru@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
CpuS390Entitlement has a 'prefix' to change the generated enumeration
constants' prefix from CPU_S390_ENTITLEMENT to S390_CPU_ENTITLEMENT.
Rename the type to S390CpuEntitlement, so that 'prefix' is not needed.
Likewise change CpuS390Polarization to S390CpuPolarization, and
CpuS390State to S390CpuState.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240904111836.3273842-10-armbru@redhat.com>
Recent commit "qapi: Smarter camel_to_upper() to reduce need for
'prefix'" added a temporary 'prefix' to delay changing the generated
code.
Revert it. This improves DisplayGLMode's generated enumeration
constant prefix from DISPLAYGL_MODE to DISPLAY_GL_MODE.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240904111836.3273842-9-armbru@redhat.com>
Recent commit "qapi: Smarter camel_to_upper() to reduce need for
'prefix'" added a temporary 'prefix' to delay changing the generated
code.
Revert it. This improves HmatLBDataType's generated enumeration
constant prefix from HMATLB_DATA_TYPE to HMAT_LB_DATA_TYPE, and
HmatLBMemoryHierarchy's from HMATLB_MEMORY_HIERARCHY to
HMAT_LB_MEMORY_HIERARCHY.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240904111836.3273842-8-armbru@redhat.com>
Recent commit "qapi: Smarter camel_to_upper() to reduce need for
'prefix'" added a temporary 'prefix' to delay changing the generated
code.
Revert it. This improves EbpfProgramID's generated enumeration
constant prefix from EBPF_PROGRAMID to EBPF_PROGRAM_ID.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240904111836.3273842-7-armbru@redhat.com>
Recent commit "qapi: Smarter camel_to_upper() to reduce need for
'prefix'" added two temporary 'prefix' to delay changing the generated
code.
Revert them. This improves QCryptoBlockFormat's generated enumeration
constant prefix from Q_CRYPTO_BLOCK_FORMAT to QCRYPTO_BLOCK_FORMAT,
and QCryptoBlockLUKSKeyslotState's from
Q_CRYPTO_BLOCKLUKS_KEYSLOT_STATE to QCRYPTO_BLOCK_LUKS_KEYSLOT_STATE.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-6-armbru@redhat.com>
Recent commit "qapi: Smarter camel_to_upper() to reduce need for
'prefix'" added a temporary 'prefix' to delay changing the generated
code.
Revert it. This improves OffAutoPCIBAR's generated enumeration
constant prefix from OFF_AUTOPCIBAR to OFF_AUTO_PCIBAR.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240904111836.3273842-5-armbru@redhat.com>
Recent commit "qapi: Smarter camel_to_upper() to reduce need for
'prefix'" added a temporary 'prefix' to delay changing the generated
code.
Revert it. This improves XDbgBlockGraphNodeType's generated
enumeration constant prefix from
X_DBG_BLOCK_GRAPH_NODE_TYPE_BLOCK_BACKEND to
XDBG_BLOCK_GRAPH_NODE_TYPE_BLOCK_BACKEND.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240904111836.3273842-4-armbru@redhat.com>
camel_to_upper() converts its argument from camel case to upper case
with '_' between words. Used for generated enumeration constant
prefixes.
When some of the words are spelled all caps, where exactly to insert
'_' is guesswork. camel_to_upper()'s guesses are bad enough in places
to make people override them with a 'prefix' in the schema.
Rewrite it to guess better:
1. Insert '_' after a non-upper case character followed by an upper
case character:
OneTwo -> ONE_TWO
One2Three -> ONE2_THREE
2. Insert '_' before the last upper case character followed by a
non-upper case character:
ACRONYMWord -> ACRONYM_Word
Except at the beginning (as in OneTwo above), or when there is
already one:
AbCd -> AB_CD
This changes the default enumeration constant prefix for a number of
enums. Generated enumeration constants change only where the default
is not overridden with 'prefix'.
The following enumerations without a 'prefix' change:
enum old camel_to_upper()
new camel_to_upper()
------------------------------------------------------------------
DisplayGLMode DISPLAYGL_MODE
DISPLAY_GL_MODE
EbpfProgramID EBPF_PROGRAMID
EBPF_PROGRAM_ID
HmatLBDataType HMATLB_DATA_TYPE
HMAT_LB_DATA_TYPE
HmatLBMemoryHierarchy HMATLB_MEMORY_HIERARCHY
HMAT_LB_MEMORY_HIERARCHY
MultiFDCompression MULTIFD_COMPRESSION
MULTI_FD_COMPRESSION
OffAutoPCIBAR OFF_AUTOPCIBAR
OFF_AUTO_PCIBAR
QCryptoBlockFormat Q_CRYPTO_BLOCK_FORMAT
QCRYPTO_BLOCK_FORMAT
QCryptoBlockLUKSKeyslotState Q_CRYPTO_BLOCKLUKS_KEYSLOT_STATE
QCRYPTO_BLOCK_LUKS_KEYSLOT_STATE
QKeyCode Q_KEY_CODE
QKEY_CODE
XDbgBlockGraphNodeType X_DBG_BLOCK_GRAPH_NODE_TYPE
XDBG_BLOCK_GRAPH_NODE_TYPE
TestUnionEnumA TEST_UNION_ENUMA
TEST_UNION_ENUM_A
Add a 'prefix' so generated code doesn't change now. Subsequent
commits will remove most of them again. Two will remain:
MULTIFD_COMPRESSION, because migration code generally spells "multifd"
that way, and Q_KEY_CODE, because that one is baked into
subprojects/keycodemapdb/tools/keymap-gen.
The following enumerations with a 'prefix' change so that the prefix
is now superfluous:
enum old camel_to_upper()
new camel_to_upper() [equal to prefix]
------------------------------------------------------------------
BlkdebugIOType BLKDEBUGIO_TYPE
BLKDEBUG_IO_TYPE
QCryptoTLSCredsEndpoint Q_CRYPTOTLS_CREDS_ENDPOINT
QCRYPTO_TLS_CREDS_ENDPOINT
QCryptoSecretFormat Q_CRYPTO_SECRET_FORMAT
QCRYPTO_SECRET_FORMAT
QCryptoCipherMode Q_CRYPTO_CIPHER_MODE
QCRYPTO_CIPHER_MODE
QCryptodevBackendType Q_CRYPTODEV_BACKEND_TYPE
QCRYPTODEV_BACKEND_TYPE
QType [builtin] Q_TYPE
QTYPE
Drop these prefixes.
The following enumerations with a 'prefix' change without making the
'prefix' superfluous:
enum old camel_to_upper()
new camel_to_upper() [equal to prefix]
prefix
------------------------------------------------------------------
CpuS390Entitlement CPUS390_ENTITLEMENT
CPU_S390_ENTITLEMENT
S390_CPU_ENTITLEMENT
CpuS390Polarization CPUS390_POLARIZATION
CPU_S390_POLARIZATION
S390_CPU_POLARIZATION
CpuS390State CPUS390_STATE
CPU_S390_STATE
S390_CPU_STATE
QAuthZListFormat Q_AUTHZ_LIST_FORMAT
QAUTH_Z_LIST_FORMAT
QAUTHZ_LIST_FORMAT
QAuthZListPolicy Q_AUTHZ_LIST_POLICY
QAUTH_Z_LIST_POLICY
QAUTHZ_LIST_POLICY
QCryptoAkCipherAlgorithm Q_CRYPTO_AK_CIPHER_ALGORITHM
QCRYPTO_AK_CIPHER_ALGORITHM
QCRYPTO_AKCIPHER_ALG
QCryptoAkCipherKeyType Q_CRYPTO_AK_CIPHER_KEY_TYPE
QCRYPTO_AK_CIPHER_KEY_TYPE
QCRYPTO_AKCIPHER_KEY_TYPE
QCryptoCipherAlgorithm Q_CRYPTO_CIPHER_ALGORITHM
QCRYPTO_CIPHER_ALGORITHM
QCRYPTO_CIPHER_ALG
QCryptoHashAlgorithm Q_CRYPTO_HASH_ALGORITHM
QCRYPTO_HASH_ALGORITHM
QCRYPTO_HASH_ALG
QCryptoIVGenAlgorithm Q_CRYPTOIV_GEN_ALGORITHM
QCRYPTO_IV_GEN_ALGORITHM
QCRYPTO_IVGEN_ALG
QCryptoRSAPaddingAlgorithm Q_CRYPTORSA_PADDING_ALGORITHM
QCRYPTO_RSA_PADDING_ALGORITHM
QCRYPTO_RSA_PADDING_ALG
QCryptodevBackendAlgType Q_CRYPTODEV_BACKEND_ALG_TYPE
QCRYPTODEV_BACKEND_ALG_TYPE
QCRYPTODEV_BACKEND_ALG
QCryptodevBackendServiceType Q_CRYPTODEV_BACKEND_SERVICE_TYPE
QCRYPTODEV_BACKEND_SERVICE_TYPE
QCRYPTODEV_BACKEND_SERVICE
Subsequent commits will tweak things to remove most of these prefixes.
Only QAUTHZ_LIST_FORMAT and QAUTHZ_LIST_POLICY will remain.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-2-armbru@redhat.com>
Adds support for 'qatzip' as an option for the multifd compression
method parameter, and implements using QAT for 'qatzip' compression and
decompression.
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Signed-off-by: Bryan Zhang <bryan.zhang@bytedance.com>
Signed-off-by: Hao Xiang <hao.xiang@linux.dev>
Signed-off-by: Yichen Wang <yichen.wang@bytedance.com>
Link: https://lore.kernel.org/r/20240830232722.58272-5-yichen.wang@bytedance.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Fix the misspellings of "overriden" also in code comments.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240813125638.395461-1-sw@weilnetz.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240813202329.1237572-20-alex.bennee@linaro.org>
Allowing an unlimited number of clients to any web service is a recipe
for a rudimentary denial of service attack: the client merely needs to
open lots of sockets without closing them, until qemu no longer has
any more fds available to allocate.
For qemu-nbd, we default to allowing only 1 connection unless more are
explicitly asked for (-e or --shared); this was historically picked as
a nice default (without an explicit -t, a non-persistent qemu-nbd goes
away after a client disconnects, without needing any additional
follow-up commands), and we are not going to change that interface now
(besides, someday we want to point people towards qemu-storage-daemon
instead of qemu-nbd).
But for qemu proper, and the newer qemu-storage-daemon, the QMP
nbd-server-start command has historically had a default of unlimited
number of connections, in part because unlike qemu-nbd it is
inherently persistent until nbd-server-stop. Allowing multiple client
sockets is particularly useful for clients that can take advantage of
MULTI_CONN (creating parallel sockets to increase throughput),
although known clients that do so (such as libnbd's nbdcopy) typically
use only 8 or 16 connections (the benefits of scaling diminish once
more sockets are competing for kernel attention). Picking a number
large enough for typical use cases, but not unlimited, makes it
slightly harder for a malicious client to perform a denial of service
merely by opening lots of connections withot progressing through the
handshake.
This change does not eliminate CVE-2024-7409 on its own, but reduces
the chance for fd exhaustion or unlimited memory usage as an attack
surface. On the other hand, by itself, it makes it more obvious that
with a finite limit, we have the problem of an unauthenticated client
holding 100 fds opened as a way to block out a legitimate client from
being able to connect; thus, later patches will further add timeouts
to reject clients that are not making progress.
This is an INTENTIONAL change in behavior, and will break any client
of nbd-server-start that was not passing an explicit max-connections
parameter, yet expects more than 100 simultaneous connections. We are
not aware of any such client (as stated above, most clients aware of
MULTI_CONN get by just fine on 8 or 16 connections, and probably cope
with later connections failing by relying on the earlier connections;
libvirt has not yet been passing max-connections, but generally
creates NBD servers with the intent for a single client for the sake
of live storage migration; meanwhile, the KubeSAN project anticipates
a large cluster sharing multiple clients [up to 8 per node, and up to
100 nodes in a cluster], but it currently uses qemu-nbd with an
explicit --shared=0 rather than qemu-storage-daemon with
nbd-server-start).
We considered using a deprecation period (declare that omitting
max-parameters is deprecated, and make it mandatory in 3 releases -
then we don't need to pick an arbitrary default); that has zero risk
of breaking any apps that accidentally depended on more than 100
connections, and where such breakage might not be noticed under unit
testing but only under the larger loads of production usage. But it
does not close the denial-of-service hole until far into the future,
and requires all apps to change to add the parameter even if 100 was
good enough. It also has a drawback that any app (like libvirt) that
is accidentally relying on an unlimited default should seriously
consider their own CVE now, at which point they are going to change to
pass explicit max-connections sooner than waiting for 3 qemu releases.
Finally, if our changed default breaks an app, that app can always
pass in an explicit max-parameters with a larger value.
It is also intentional that the HMP interface to nbd-server-start is
not changed to expose max-connections (any client needing to fine-tune
things should be using QMP).
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240807174943.771624-12-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[ericb: Expand commit message to summarize Dan's argument for why we
break corner-case back-compat behavior without a deprecation period]
Signed-off-by: Eric Blake <eblake@redhat.com>
BlockdevSnapshotInternal is the arguments type of command
blockdev-snapshot-internal-sync. Its doc comment contains this note:
# .. note:: In a transaction, if @name is empty or any snapshot matching
# @name exists, the operation will fail. Only some image formats
# support it; for example, qcow2, and rbd.
"In a transaction" is misleading, and "if @name is empty or any
snapshot matching @name exists, the operation will fail" is redundant
with the command's Errors documentation. Drop.
The remainder is fine. Move it to the command's doc comment, where it
is more prominently visible, with a slight rephrasing for clarity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240718123609.3063055-1-armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fixes higher-half address parsing for QMP commands
`[p]memsave`.
Signed-off-by: Josh Junon <junon@oro.sh>
Message-ID: <20240802140704.13591-1-junon@oro.sh>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Subject tweaked, and one PRId64 updated to PRIu64]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Sweep the entire documentation again. Last done in commit
209e64d9ed (qapi: Refill doc comments to conform to current
conventions).
To check the generated documentation does not change, I compared the
generated HTML before and after this commit with "wdiff -3". Finds no
differences. Comparing with diff is not useful, as the reflown
paragraphs are visible there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240729065220.860163-1-armbru@redhat.com>
[Straightforward conflict with commit 442110bc6f resolved]
CpuModelInfo is used both as command argument and in command
returns.
Its @deprecated-props array does not make any sense in arguments,
and is silently ignored. We actually want it only as return value
of query-cpu-model-expansion.
Move it from CpuModelInfo to CpuModelExpansionType, and document
its dependence on expansion type property.
This was identified late during review [1] and we have to fix it up
while it's not part of an official QEMU release yet.
[1] https://lore.kernel.org/qemu-devel/20240719181741.35146-1-walling@linux.ibm.com/
Message-ID: <20240726203646.20279-1-walling@linux.ibm.com>
Fixes: eed0e8ffa3 ("target/s390x: filter deprecated properties based on model expansion type")
Signed-off-by: Collin Walling <walling@linux.ibm.com>
[ david: - add "Fixes", adjust description, reference v3 instead
- make property s390x-only and non-optional
- fixup "populate" vs. "populated" ]
Signed-off-by: David Hildenbrand <david@redhat.com>
Some QOM properties are associated with ObjectTypes that already
depend on CONFIG_* switches. So to avoid generating dead code,
let's also make the definition of those properties dependent on
the corresponding CONFIG_*.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-ID: <20240604135931.311709-1-sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Make SecretKeyringProperties conditional, too]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The 'detached-header' field in QCryptoBlockCreateOptionsLUKS
was left over from earlier patch iterations.
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, there is no way to execute the query-cpu-model-expansion
command to retrieve a comprehenisve list of deprecated properties, as
the result is dependent per-model. To enable this, the expansion output
is modified as such:
When reporting a "full" CPU model, show the *entire* list of deprecated
properties regardless if they are supported on the model. A full
expansion outputs all known CPU model properties anyway, so it makes
sense to report all deprecated properties here too.
This allows management apps to query a single model (e.g. host) to
acquire the full list of deprecated properties.
Additionally, when reporting a "static" CPU model, the command will
only show deprecated properties that are a subset of the model's
*enabled* properties. This is more accurate than how the query was
handled before, which blindly reported deprecated properties that
were never otherwise introduced for certain models.
Acked-by: David Hildenbrand <david@redhat.com>
Suggested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Message-ID: <20240719181741.35146-1-walling@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These examples require longer explanations or have explanations that
require markup to look reasonable when rendered and so use the longer
form of the ".. qmp-example::" directive.
By using the :annotated: option, the content in the example block is
assumed *not* to be a code block literal and is instead parsed as normal
rST - with the exception that any code literal blocks after `::` will
assumed to be a QMP code literal block.
Note: There's one title-less conversion in this patch that comes along
for the ride because it's part of a larger "Examples" block that was
better to convert all at once.
See commit-5: "docs/qapidoc: create qmp-example directive", for a
detailed explanation of this custom directive syntax.
See commit+1: "qapi: remove "Example" doc section" for a detailed
explanation of why.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240717021312.606116-9-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When an Example section has a brief explanation, convert it to a
qmp-example:: section using the :title: option.
Rule of thumb: If the title can fit on a single line and requires no rST
markup, it's a good candidate for using the :title: option of
qmp-example.
In this patch, trailing punctuation is removed from the title section
for consistent headline aesthetics. In just one case, specifics of the
example are removed to make the title read better.
See commit-4: "docs/qapidoc: create qmp-example directive", for a
detailed explanation of this custom directive syntax.
See commit+2: "qapi: remove "Example" doc section" for a detailed
explanation of why.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240717021312.606116-8-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Use the no-option form of ".. qmp-example::" to convert any Examples
that do not have any form of caption or explanation whatsoever. Note
that in a few cases, example sections are split into two or more
separate example blocks. This is only done stylistically to create a
delineation between two or more logically independent examples.
See commit-3: "docs/qapidoc: create qmp-example directive", for a
detailed explanation of this custom directive syntax.
See commit+3: "qapi: remove "Example" doc section" for a detailed
explanation of why.
Note: an empty "TODO" line was added to announce-self to keep the
example from floating up into the body; this will be addressed more
rigorously in the new qapidoc generator.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20240717021312.606116-7-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Markup fixed in one place]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Doc comments are reference documentation for users of QMP.
SpiceQueryMouseMode's doc comment contains a note explaining why it's
not named SpiceMouseMode: spice/enums.h has it already. Irrelevant
for users of QMP; delete the note.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240711112228.2140606-6-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Doc comments are reference documentation for users of QMP.
SocketAddress's doc comment contains a deprecation note advising
developers to use SocketAddress for new code. Irrelevant for users of
QMP. Move the note out of the doc comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240711112228.2140606-5-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When no UUID has been specified, query-uuid returns
{"UUID": "00000000-0000-0000-0000-000000000000"}
The doc comment calls this "a null UUID", which I find less than
clear. RFC 9562 calls it "the nil UUID (all zeroes)", so use that
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240711112228.2140606-4-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
[Wording improved, commit message adjusted]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
CpuInstanceProperties' doc comment describes its members as properties
to be passed to device_add when hot-plugging a CPU.
This was in fact the initial use of this type, with
query-hotpluggable-cpus: letting management applications find out what
properties need to be passed with device_add to hot-plug a CPU.
We've since added other uses: set-numa-node (commit 419fcdec3c and
f3be67812c), and query-cpus-fast (commit ce74ee3dea). These are not
about device-add.
query-hotpluggable-cpus uses CpuInstanceProperties within
HotpluggableCPU. Lift the documentation related to device-add from
CpuInstanceProperties to HotpluggableCPU.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240711112228.2140606-3-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
PciDeviceInfo's doc comment has a note on PciDeviceClass member @desc.
Since the note applies always, not just within PciDeviceInfo, merge it
into PciDeviceClass's description of member @desc.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240711112228.2140606-2-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Commit 8f9a9259d3 added ObjectType member @x-vfio-user-server with
feature unstable, but neglected to explain why it is unstable. Do
that now.
Fixes: 8f9a9259d3 (vfio-user: define vfio-user-server object)
Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Cc: John G Johnson <john.g.johnson@oracle.com>
Cc: Jagannathan Raman <jag.raman@oracle.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240703095310.1242102-1-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
[Indentation fixed]
Currently if the 'legacy-vm-type' property of the sev-guest object is
'on', QEMU will attempt to use the newer KVM_SEV_INIT2 kernel
interface in conjunction with the newer KVM_X86_SEV_VM and
KVM_X86_SEV_ES_VM KVM VM types.
This can lead to measurement changes if, for instance, an SEV guest was
created on a host that originally had an older kernel that didn't
support KVM_SEV_INIT2, but is booted on the same host later on after the
host kernel was upgraded.
Instead, if legacy-vm-type is 'off', QEMU should fail if the
KVM_SEV_INIT2 interface is not provided by the current host kernel.
Modify the fallback handling accordingly.
In the future, VMSA features and other flags might be added to QEMU
which will require legacy-vm-type to be 'off' because they will rely
on the newer KVM_SEV_INIT2 interface. It may be difficult to convey to
users what values of legacy-vm-type are compatible with which
features/options, so as part of this rework, switch legacy-vm-type to a
tri-state OnOffAuto option. 'auto' in this case will automatically
switch to using the newer KVM_SEV_INIT2, but only if it is required to
make use of new VMSA features or other options only available via
KVM_SEV_INIT2.
Defining 'auto' in this way would avoid inadvertantly breaking
compatibility with older kernels since it would only be used in cases
where users opt into newer features that are only available via
KVM_SEV_INIT2 and newer kernels, and provide better default behavior
than the legacy-vm-type=off behavior that was previously in place, so
make it the default for 9.1+ machine types.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
cc: kvm@vger.kernel.org
Signed-off-by: Michael Roth <michael.roth@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Link: https://lore.kernel.org/r/20240710041005.83720-1-michael.roth@amd.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a command's arguments are specified as an explicit type T,
generated documentation points to the members of T.
Example:
##
# @announce-self:
#
# Trigger generation of broadcast RARP frames to update network
[...]
##
{ 'command': 'announce-self', 'boxed': true,
'data' : 'AnnounceParameters'}
generates
"announce-self" (Command)
-------------------------
Trigger generation of broadcast RARP frames to update network
[...]
Arguments
~~~~~~~~~
The members of "AnnounceParameters"
Except when the command takes its arguments unboxed , i.e. it doesn't
have 'boxed': true, we generate *nothing*. A few commands have a
reference in their doc comment to compensate, but most don't.
Example:
##
# @blockdev-snapshot-sync:
#
# Takes a synchronous snapshot of a block device.
#
# For the arguments, see the documentation of BlockdevSnapshotSync.
[...]
##
{ 'command': 'blockdev-snapshot-sync',
'data': 'BlockdevSnapshotSync',
'allow-preconfig': true }
generates
"blockdev-snapshot-sync" (Command)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Takes a synchronous snapshot of a block device.
For the arguments, see the documentation of BlockdevSnapshotSync.
[...]
Same for event data.
Fix qapidoc.py to generate the reference regardless of boxing. Delete
now redundant references in the doc comments.
Fixes: 4078ee5469 (docs/sphinx: Add new qapi-doc Sphinx extension)
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240628112756.794237-1-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Generally, surround command-line options with ``literal`` markup to help
it stand out from prose in rendered HTML, and add cross-references to
replace "see also" messages.
References to types, values, and other QAPI definitions are not yet
adjusted here; they will be converted en masse in a subsequent patch
after the new QAPI doc generator is merged.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-13-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Where I've noticed, rephrase the note to read more fluently.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-12-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We do not need a dedicated section for notes. By eliminating a specially
parsed section, these notes can be treated as normal rST paragraphs in
the new QMP reference manual, and can be placed and styled much more
flexibly.
Convert all existing "Note" and "Notes" sections to pure rST. As part of
the conversion, capitalize the first letter of each sentence and add
trailing punctuation where appropriate to ensure notes look sensible and
consistent in rendered HTML documentation. Markup is also re-aligned to
the de-facto standard of 3 spaces for directives.
Update docs/devel/qapi-code-gen.rst to reflect the new paradigm, and
update the QAPI parser to prohibit "Note" sections while suggesting a
new syntax. The exact formatting to use is a matter of taste, but a good
candidate is simply:
.. note:: lorem ipsum ...
... dolor sit amet ...
... consectetur adipiscing elit ...
... but there are other choices, too. The Sphinx readthedocs theme
offers theming for the following forms (capitalization unimportant); all
are adorned with a (!) symbol () in the title bar for rendered HTML
docs.
See
https://sphinx-rtd-theme.readthedocs.io/en/stable/demo/demo.html#admonitions
for examples of each directive/admonition in use.
These are rendered in orange:
.. Attention:: ...
.. Caution:: ...
.. WARNING:: ...
These are rendered in red:
.. DANGER:: ...
.. Error:: ...
These are rendered in green:
.. Hint:: ...
.. Important:: ...
.. Tip:: ...
These are rendered in blue:
.. Note:: ...
.. admonition:: custom title
admonition body text
This patch uses ".. note::" almost everywhere, with just two "caution"
directives. Several instances of "Notes:" have been converted to
merely ".. note::", or multiple ".. note::" where appropriate.
".. admonition:: notes" is used in a few places where we had an
ordered list of multiple notes that would not make sense as
standalone/separate admonitions. Two "Note:" following "Example:"
have been turned into ordinary paragraphs within the example.
NOTE: Because qapidoc.py does not attempt to preserve source ordering of
sections, the conversion of Notes from a "tagged section" to an
"untagged section" means that rendering order for some notes *may
change* as a result of this patch. The forthcoming qapidoc.py rewrite
strictly preserves source ordering in the rendered documentation, so
this issue will be rectified in the new generator.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com> [for block*.json]
Message-ID: <20240626222128.406106-11-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message clarified slightly, period added to one more note]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
By unstated convention, Errors sections are rST lists. Document the
convention, and make the one exception conform.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-10-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The new QMP documentation generator wants to parse all examples as
"QMP". We have an existing QMP lexer in docs/sphinx/qmp_lexer.py (Seen
in-use here: https://qemu-project.gitlab.io/qemu/interop/bitmaps.html)
that allows the use of "->", "<-" and "..." tokens to denote QMP
protocol flow with elisions, but otherwise defers to the JSON lexer.
To utilize this lexer for the existing QAPI documentation, we need them
to conform to a standard so that they lex and render correctly. Once the
QMP lexer is active for examples, errant QMP/JSON will produce warning
messages and fail the build.
Fix any invalid JSON found in QAPI documentation (identified by
attempting to lex all examples as QMP; see subsequent
commits). Additionally, elisions must be standardized for the QMP lexer;
they must be represented as the value "...", so three examples have been
adjusted to support that format here.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-9-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Markus suggested that we make the unstable. I don't expect these
interfaces to change because of their tight coupling to the Compute
Express Link (CXL) Specification, Revision 3.1 Fabric Management API
definitions which can only be extended in backwards compatible way.
However, there seems little disadvantage in taking a cautious path
for now and marking them as unstable interfaces.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240625170805.359278-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
