Rather than creating stubs for every command that just return
QERR_UNSUPPORTED, use 'if' conditions in the QAPI schema to
fully exclude generation of the commands on non-Windows.
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-13-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Some commands were blocked based on CONFIG_FSFREEZE, but their
impl had nothing todo with CONFIG_FSFREEZE, and were instead
either Linux-only, or Win+Linux-only.
Rather than creating stubs for every command that just return
QERR_UNSUPPORTED, use 'if' conditions in the QAPI schema to
fully exclude generation of the stats and fsinfo commands on
platforms that can't support them.
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-12-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Rather than creating stubs for every comamnd that just return
QERR_UNSUPPORTED, use 'if' conditions in the QAPI schema to
fully exclude generation of the network interface command on
POSIX platforms lacking getifaddrs().
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-11-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Rather than creating stubs for every command that just return
QERR_UNSUPPORTED, use 'if' conditions in the QAPI schema to
fully exclude generation of the commands on non-Linux POSIX
platforms
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240712132459.3974109-10-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Rather than creating stubs for every command that just return
QERR_UNSUPPORTED, use 'if' conditions in the QAPI schema to
fully exclude generation of the commands on Windows.
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This also fixes an accidental inconsistency where some commands
(guest-get-diskstats & guest-get-cpustats) are implemented as
stubs, yet not added to the blockedrpc list. Those change their
error message from
{"class": "GenericError, "desc": "this feature or command is not currently supported"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
The final additional benefit is that the QGA protocol reference
now documents what conditions enable use of the command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240712132459.3974109-9-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Defining these at the meson level allows them to be used a conditional
tests in the QAPI schemas.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240712132459.3974109-8-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
The qmp_guest_{set,get}_{memory_blocks,block_info} command impls in
commands-posix.c are surrounded by '#ifdef __linux__' so should
instead live in commands-linux.c
This also removes a "#ifdef CONFIG_LINUX" that was nested inside
a "#ifdef __linux__".
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-7-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
The qmp_guest_{diskstats,cpustats} command impls in
commands-posix.c are surrounded by '#ifdef __linux__' so should
instead live in commands-linux.c
This also removes a "#ifdef CONFIG_LINUX" that was nested inside
a "#ifdef __linux__".
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-6-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
The qmp_guest_{fstrim, get_fsinfo, get_disks} command impls in
commands-posix.c are surrounded by '#ifdef __linux__' so should
instead live in commands-linux.c
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240712132459.3974109-5-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
The qmp_guest_suspend_{disk,ram,hybrid} command impls in
commands-posix.c are surrounded by '#ifdef __linux__' so should
instead live in commands-linux.c
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240712132459.3974109-4-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
The qmp_guest_set_vcpus and qmp_guest_get_vcpus command impls in
commands-posix.c are surrounded by '#ifdef __linux__' so should
instead live in commands-linux.c
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240712132459.3974109-3-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
This command has never existed in tree, since it was renamed to
guest-get-memory-block-info before being merged.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240712132459.3974109-2-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Where I've noticed, rephrase the note to read more fluently.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-12-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We do not need a dedicated section for notes. By eliminating a specially
parsed section, these notes can be treated as normal rST paragraphs in
the new QMP reference manual, and can be placed and styled much more
flexibly.
Convert all existing "Note" and "Notes" sections to pure rST. As part of
the conversion, capitalize the first letter of each sentence and add
trailing punctuation where appropriate to ensure notes look sensible and
consistent in rendered HTML documentation. Markup is also re-aligned to
the de-facto standard of 3 spaces for directives.
Update docs/devel/qapi-code-gen.rst to reflect the new paradigm, and
update the QAPI parser to prohibit "Note" sections while suggesting a
new syntax. The exact formatting to use is a matter of taste, but a good
candidate is simply:
.. note:: lorem ipsum ...
... dolor sit amet ...
... consectetur adipiscing elit ...
... but there are other choices, too. The Sphinx readthedocs theme
offers theming for the following forms (capitalization unimportant); all
are adorned with a (!) symbol () in the title bar for rendered HTML
docs.
See
https://sphinx-rtd-theme.readthedocs.io/en/stable/demo/demo.html#admonitions
for examples of each directive/admonition in use.
These are rendered in orange:
.. Attention:: ...
.. Caution:: ...
.. WARNING:: ...
These are rendered in red:
.. DANGER:: ...
.. Error:: ...
These are rendered in green:
.. Hint:: ...
.. Important:: ...
.. Tip:: ...
These are rendered in blue:
.. Note:: ...
.. admonition:: custom title
admonition body text
This patch uses ".. note::" almost everywhere, with just two "caution"
directives. Several instances of "Notes:" have been converted to
merely ".. note::", or multiple ".. note::" where appropriate.
".. admonition:: notes" is used in a few places where we had an
ordered list of multiple notes that would not make sense as
standalone/separate admonitions. Two "Note:" following "Example:"
have been turned into ordinary paragraphs within the example.
NOTE: Because qapidoc.py does not attempt to preserve source ordering of
sections, the conversion of Notes from a "tagged section" to an
"untagged section" means that rendering order for some notes *may
change* as a result of this patch. The forthcoming qapidoc.py rewrite
strictly preserves source ordering in the rendered documentation, so
this issue will be rectified in the new generator.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com> [for block*.json]
Message-ID: <20240626222128.406106-11-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message clarified slightly, period added to one more note]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The 'blacklist' argument / config key are deprecated since commit
582a098e6c ("qga: Replace 'blacklist' command line and config file
options by 'block-rpcs'"), time to remove them.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20240530070413.19181-1-philmd@linaro.org>
Some, but not all error messages are of the form
Guest agent command failed, error was '<actual error message>'
For instance, command guest-exec can fail with an error message like
Guest agent command failed, error was 'Failed to execute child process “/bin/invalid-cmd42” (No such file or directory)'
Shorten this to just just the actual error message. The guest-exec
example becomes
Failed to execute child process “/bin/invalid-cmd42” (No such file or directory)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240514105829.729342-3-armbru@redhat.com>
[Superfluous #include "qapi/qmp/qerror.h" deleted]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
When guest-set-user-password's argument @password can't be converted
from UTF-8 to UTF-16, we report something like
Guest agent command failed, error was 'Invalid sequence in conversion input'
Improve this to
can't convert 'password' to UTF-16: Invalid sequence in conversion input
Likewise for argument @username, and guest-file-open argument @path,
even though I'm not sure you can actually get invalid input past the
QMP core there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240514105829.729342-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Now that we bumped the minimum glib version to 2.66, we can drop
the old code.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240418101056.302103-9-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we dropped support for CentOS 8 and Ubuntu 20.04, we can
look into bumping the glib version to a new minimum for further
clean-ups. According to repology.org, available versions are:
CentOS Stream 9: 2.66.7
Debian 11: 2.66.8
Fedora 38: 2.74.1
Freebsd: 2.78.4
Homebrew: 2.80.0
Openbsd: 2.78.4
OpenSuse leap 15.5: 2.70.5
pkgsrc_current: 2.78.4
Ubuntu 22.04: 2.72.1
Thus it should be safe to bump the minimum glib version to 2.66 now.
Version 2.66 comes with new functions for URI parsing which will
allow further clean-ups in the following patches.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240418101056.302103-8-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qga/commands-posix.c does not compile on FreeBSD due to a confusion
between "chpasswdata" (wrong) and "chpasswddata" (used in the #else
branch).
Fixes: 0e5b75a390 ("qga/commands-posix: qmp_guest_set_user_password: use ga_run_command helper")
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240424144029.30665-2-aidan_leuck@selinc.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
In preparation of a Windows implementation, move the
non-POSIX specific code to commands-common-ssh.
Signed-off-by: Aidan Leuck <aidan_leuck@selinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Dehan Meng <demeng@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Link: https://lore.kernel.org/r/20240424144029.30665-2-aidan_leuck@selinc.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
There's no need to check for the existence of the "chpasswd", "pw"
executables, as the exec() call will do that for us.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Link: https://lore.kernel.org/r/20240320161648.158226-8-andrey.drobyshev@virtuozzo.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Since commit 246d76eba ("qga: guest_suspend: decoupling pm-utils and sys
logic") pm-utils logic is running in a separate child from the sysfs
logic. Now when suspending via sysfs we don't really need to do that in
a separate process as we only need to perform one write to /sys/power/state.
Let's just use g_file_set_contents() to simplify things here.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Link: https://lore.kernel.org/r/20240320161648.158226-7-andrey.drobyshev@virtuozzo.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
There's no need to check for the existence of the hook executable, as the
exec() call will do that for us.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Link: https://lore.kernel.org/r/20240320161648.158226-6-andrey.drobyshev@virtuozzo.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
There's no need to check for the existence of "/sbin/hwclock", the
exec() call will do that for us.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Link: https://lore.kernel.org/r/20240320161648.158226-5-andrey.drobyshev@virtuozzo.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Also remove the G_GNUC_UNUSED attribute added in the previous commit from
the helper.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Link: https://lore.kernel.org/r/20240320161648.158226-4-andrey.drobyshev@virtuozzo.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
When executing guest commands in *nix environment, we repeat the same
fork/exec pattern multiple times. Let's just separate it into a single
helper which would also be able to feed input data into the launched
process' stdin. This way we can avoid code duplication.
To keep the history more bisectable, let's replace qmp commands
implementations one by one. Also add G_GNUC_UNUSED attribute to the
helper and remove it in the next commit.
Originally-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Link: https://lore.kernel.org/r/20240320161648.158226-3-andrey.drobyshev@virtuozzo.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Since the commit 25b5ff1a86 ("qga: add mountpoint usage info to
GuestFilesystemInfo") we have 2 values reported in guest-get-fsinfo:
used = (f_blocks - f_bfree), total = (f_blocks - f_bfree + f_bavail) as
returned by statvfs(3). While on Windows guests that's all we can get
with GetDiskFreeSpaceExA(), on POSIX guests we might also be interested in
total file system size, as it's visible for root user. Let's add an
optional field 'total-bytes-privileged' to GuestFilesystemInfo struct,
which'd only be reported on POSIX and represent f_blocks value as returned
by statvfs(3).
While here, also tweak the docs to reflect better where those values
come from.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Link: https://lore.kernel.org/r/20240320161648.158226-2-andrey.drobyshev@virtuozzo.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
According to the comment in qga/meson.build, the test got disabled
since there were problems with the fuzzing job. But instead of
disabling this test completely, we should still be fine running
it when fuzzing is disabled.
Message-ID: <20240426162348.684143-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For legibility, wrap text paragraphs so every line is at most 70
characters long.
To check the generated documentation does not change, I compared the
generated HTML before and after this commit with "wdiff -3". Finds no
differences. Comparing with diff is not useful, as the refilled
paragraphs are visible there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240322140910.328840-13-armbru@redhat.com>
Add support of Windows Server 2025 in get-osinfo command
Signed-off-by: Dehan Meng <demeng@redhat.com>
Message-ID: <20240222152835.72095-4-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Link: https://lore.kernel.org/r/20240304134532.28506-4-kkostiuk@redhat.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
ga_get_win_name() iterates over all elements in the arrays by
checking the 'version' field is non-NULL. Since the arrays are
guarded by a NULL terminating element, we don't need to specify
their size:
static char *ga_get_win_name(...)
{
...
const ga_matrix_lookup_t *table = WIN_VERSION_MATRIX[tbl_idx];
const ga_win_10_0_t *win_10_0_table = ...
...
while (table->version != NULL) {
^^^^^^^^^^^^^^^
while (win_10_0_table->version != NULL) {
^^^^^^^^^^^^^^^
This will simplify maintenance when adding new entries to these
arrays.
Split WIN_VERSION_MATRIX into WIN_CLIENT_VERSION_MATRIX and
WIN_SERVER_VERSION_MATRIX because multidimensional array must
have bounds for all dimensions except the first.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240222152835.72095-3-philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Link: https://lore.kernel.org/r/20240304134532.28506-3-kkostiuk@redhat.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Most of the code base use the 'const' qualifier *before*
the type being qualified. Use the same style to unify.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240222152835.72095-2-philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Link: https://lore.kernel.org/r/20240304134532.28506-2-kkostiuk@redhat.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Documentation claims the command can "return NULL". "NULL" doesn't
exist in JSON. "null" does, but the command returns lists, and null
isn't. Correct documentation to "return an empty list".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-13-armbru@redhat.com>
"Returns:" sections of guest-fsfreeze-freeze and
guest-fsfreeze-freeze-list describe both command behavior and success
response. Move behavior out, so "Returns:" is only about success
response.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-12-armbru@redhat.com>
Drop "on success" where it is redundant with "Returns:".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-11-armbru@redhat.com>
Add missing return member documentation of guest-get-disks,
guest-get-devices, guest-get-diskstats, and guest-get-cpustats.
The NVMe SMART information returned by guest-getdisks remains
undocumented. Add a TODO there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-10-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The command's doc comment describes the argument, but it's not marked
up as such. Easy enough to fix.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-9-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The command's doc comment describes the argument, but it's not marked
up as such. Easy enough to fix.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-8-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The QAPI generator forces you to document your stuff. Except for
command arguments, event data, and members of enum and object types:
these the generator silently "documents" as "Not documented".
We can't require proper documentation there without first fixing all
the offenders. We've always had too many offenders to pull that off.
Right now, we have more than 500. Worse, we seem to fix old ones no
faster than we add new ones: in the past year, we fixed 22 ones, but
added 26 new ones.
To help arrest the backsliding, make missing documentation an error
unless the command, type, or event is in listed in new pragma
documentation-exceptions.
List all the current offenders: 117 commands and types in qapi/, and 9
in qga/.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-7-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Documentation of commands guest-ssh-get-authorized-keys,
guest-ssh-add-authorized-keys, and guest-ssh-remove-authorized-keys
describes the command's purpose after its arguments. Everywhere else,
we do it the other way round. Move it for consistency.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240129115008.674248-6-armbru@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Solaris has net/if_arp.h and netinet/if_ether.h rather than net/ethernet.h,
but does not define ETHER_ADDR_LEN, instead providing ETHERADDRL.
Signed-off-by: Nick Briggs <nicholas.h.briggs@gmail.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
When a volume has more than one disk, all disks cannot be
returned correctly because there is not enough malloced memory
for disk extents, so before executing DeviceIoControl for the
second time, get the correct size of the required memory space
to store all disk extents.
Details:
https://learn.microsoft.com/en-us/windows/win32/api/winioctl/ns-winioctl-volume_disk_extents
Signed-off-by: Peng Ji <peng.ji@smartx.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1757
Updates to qga help output and documentation for --allow-rpcs and --blocks-rpcs
Signed-off-by: "Angel M. Villegas" <anvilleg@cisco.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
This variable is about the host OS, not the target. It is used a lot
more since the Meson conversion, but the original sin dates back to 2003.
Time to fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
config_targetos is now empty and can be removed; its use in sourcesets
that do not involve target-specific files can be replaced with an empty
dictionary.
In fact, at this point *all* sourcesets that do not involve
target-specific files are just glorified mutable arrays. Enforce that
they never test for symbols in "when:" by computing the set of files
without "strict: false".
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
