There is a not-so-subtle race in QSLIST_INSERT_HEAD_ATOMIC.
Because atomic_cmpxchg returns the old value instead of a success flag,
QSLIST_INSERT_HEAD_ATOMIC was checking for success by comparing against
the second argument to atomic_cmpxchg. Unfortunately, this only works
if the second argument is a local or thread-local variable.
If it is in memory, it can be subject to common subexpression elimination
(and then everything's fine) or reloaded after the atomic_cmpxchg,
depending on the compiler's whims. If the latter happens, the race can
happen. A thread can sneak in, doing something on elm->field.sle_next
after the atomic_cmpxchg and before the comparison. This causes a wrong
failure, and then two threads are using "elm" at the same time. In the
case discovered by Christian, the sequence was likely something like this:
thread 1 | thread 2
QSLIST_INSERT_HEAD_ATOMIC |
atomic_cmpxchg succeeds |
elm added to list |
| steal release_pool
| QSLIST_REMOVE_HEAD
| elm removed from list
| ...
| QSLIST_INSERT_HEAD_ATOMIC
| (overwrites sle_next)
spurious failure |
atomic_cmpxchg succeeds |
elm added to list again |
|
steal release_pool |
QSLIST_REMOVE_HEAD |
elm removed again |
The last three steps could be done by a third thread as well.
A reproducer that failed in a matter of seconds is as follows:
- the guest has 32 VCPUs on a 28 core host (hyperthreading was enabled),
memory was 16G just to err on the safe side (the host has 64G, but hey
at least you need no s390)
- the guest has 24 null-aio virtio-blk devices using dataplane
(-object iothread,id=ioN -drive if=none,id=blkN,driver=null-aio,size=500G
-device virtio-blk-pci,iothread=ioN,drive=blkN)
- the guest also has a single network interface. It's only doing loopback
tests so slirp vs. tap and the model doesn't matter.
- the guest is running fio with the following script:
[global]
rw=randread
blocksize=16k
ioengine=libaio
runtime=10m
buffered=0
fallocate=none
time_based
iodepth=32
[virtio1a]
filename=/dev/block/252\:16
[virtio1b]
filename=/dev/block/252\:16
...
[virtio24a]
filename=/dev/block/252\:384
[virtio24b]
filename=/dev/block/252\:384
[listen1]
protocol=tcp
ioengine=net
port=12345
listen
rw=read
bs=4k
size=1000g
[connect1]
protocol=tcp
hostname=localhost
ioengine=net
port=12345
protocol=tcp
rw=write
startdelay=1
size=1000g
...
[listen8]
protocol=tcp
ioengine=net
port=12352
listen
rw=read
bs=4k
size=1000g
[connect8]
protocol=tcp
hostname=localhost
ioengine=net
port=12352
rw=write
startdelay=1
size=1000g
Moral of the story: I should refrain from writing more clever stuff.
At least it looks like it is not too clever to be undebuggable.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1426002357-6889-1-git-send-email-pbonzini@redhat.com
Fixes: c740ad92d0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rename config option from "glx" to "opengl", glx will not be the only
option for opengl in near future. Also switch over to pkg-config for
opengl support detection.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
A bunch of fixes all over the place, some of the
bugs fixed are actually regressions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVAH/uAAoJECgfDbjSjVRprq0H/iyqLSHQIv6gNOPYQbLXOCv0
pkCeLx6kTMO9lSwxZcsZvMsYPeiEL3CHRKJcEjq0+Ap0uen0pa2Yl3WzyJcnBcib
xwkHk/UftFYAiZAzVtd4moXujvVLYNL1ukvr/wPOdIkTEn8U6K3NaT3pLooc369f
oTyQhlL3E9HJ5S6X0HXJIFwtsOIhPfS3NCLoDFbFjtb9mIsqTx7N5s2C5hctF+ir
JtyuwPx5oT73WYxoYmjSP6n/Nf5cuJdqtm6o2KijjhWWYMJ6epYVBo/DD6dIFbmJ
V/23dxpon+lvhae2c2LAVrkiJ1Boon/eMbJK/mNwpFX7vW35ataLPy6pYpaiEJs=
=RUld
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
misc fixes and cleanups
A bunch of fixes all over the place, some of the
bugs fixed are actually regressions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed Mar 11 17:48:30 2015 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (25 commits)
virtio-scsi: remove empty wrapper for cmd
virtio-scsi: clean out duplicate cdb field
virtio-scsi: fix cdb/sense size
uapi/virtio_scsi: allow overriding CDB/SENSE size
virtio-scsi: drop duplicate CDB/SENSE SIZE
exec: don't include hw/boards for linux-user
acpi: specify format for build_append_namestring
MAINTAINERS: drop aliguori@amazon.com
tpm: Move memory subregion function into realize function
virtio-pci: Convert to realize()
pci: Convert pci_nic_init() to Error to avoid qdev_init()
machine: query mem-merge machine property
machine: query dump-guest-core machine property
hw/boards: make it safe to include for linux-user
machine: query phandle-start machine property
machine: query kvm-shadow-mem machine property
kvm: add machine state to kvm_arch_init
machine: query kernel-irqchip property
machine: allowed/required kernel-irqchip support
machine: replace qemu opts with iommu property
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The anonymous struct only has a single field now, drop the wrapper
structure.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
cdb is now part of cmd, drop it from req.
There's also nothing to check using build assert now.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Commit "virtio-scsi: use standard-headers" added
cdb and sense into req/rep structures, which
breaks uses of sizeof for these structures,
since qemu adds its own arrays on top.
To fix, redefine CDB/sense field size to 0.
Reported-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU wants to use virtio scsi structures with
a different VIRTIO_SCSI_CDB_SIZE/VIRTIO_SCSI_SENSE_SIZE,
let's add ifdefs to allow overriding them.
Keep the old defines under new names:
VIRTIO_SCSI_CDB_DEFAULT_SIZE/VIRTIO_SCSI_SENSE_DEFAULT_SIZE,
since that's what these values really are:
defaults for cdb/sense size fields.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
As noted by Andreas, hw/boards.h shouldn't be used outside softmmu code.
Include it conditionally, and drop the (now unnecessary) ifdef guards in
hw/boards.h
Reported-by: Andreas Färber <afaerber@suse.de>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Running
qemu-bin ... -machine pc,mem-merge=on
leads to crash:
x86_64-softmmu/qemu-system-x86_64 -machine pc,dump-guest-core=on
qemu-system-x86_64: qemu/util/qemu-option.c:387: qemu_opt_get_bool_helper:
Assertion `opt->desc && opt->desc->type == QEMU_OPT_BOOL' failed. Aborted
(core dumped)
This happens because the commit e79d5a6 ("machine: remove qemu_machine_opts
global list") removed the global option descriptions and moved them to
MachineState's QOM properties.
Fix this by querying machine properties through designated wrappers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Running
qemu-bin ... -machine pc,dump-guest-core=on
leads to crash:
x86_64-softmmu/qemu-system-x86_64 -machine pc,dump-guest-core=on
qemu-system-x86_64: qemu/util/qemu-option.c:387: qemu_opt_get_bool_helper:
Assertion `opt->desc && opt->desc->type == QEMU_OPT_BOOL' failed. Aborted
(core dumped)
This happens because the commit e79d5a6 ("machine: remove qemu_machine_opts
global list") removed the global option descriptions and moved them to
MachineState's QOM properties.
Fix this by querying machine properties through designated wrappers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Make it safe to include hw/boards.h in exec.c
for linux-user configurations.
We don't need any of its contents though.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit e79d5a6 ("machine: remove qemu_machine_opts global list") removed
the global option descriptions and moved them to MachineState's QOM
properties.
Query phandle-start by accessing machine properties through designated
wrappers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e79d5a6 ("machine: remove qemu_machine_opts global list") removed
the global option descriptions and moved them to MachineState's QOM
properties.
Query kvm-shadow-mem by accessing machine properties through designated
wrappers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Needed to query machine's properties.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
The code using kernel-irqchip property requires 'allowed/required'
functionality. Replace machine's kernel_irqchip field with two fields
representing the new functionality and expose them through wrappers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes a QEMU crash when passing iommu parameter in command line.
Running
x86_64-softmmu/qemu-system-x86_64 -machine pc,iommu=on -enable-kvm
leads to crash:
qemu-system-x86_64: qemu/util/qemu-option.c:387: qemu_opt_get_bool_helper:
Assertion `opt->desc && opt->desc->type == QEMU_OPT_BOOL' failed.
Aborted (core dumped)
This happens because commit e79d5a6 ("machine: remove qemu_machine_opts global
list") removed the global option descriptions and moved them to MachineState's
QOM properties.
Fix this by querying machine properties through designated wrappers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
* fix a bug in bitops.h
* implement SD card support on integratorcp
* add a missing 'compatible' property for Cortex-A57
* add Netduino 2 machine model
* fix command line parsing bug for CPU options with multiple CPUs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=HTma
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20150311' into staging
target-arm queue:
* fix a bug in bitops.h
* implement SD card support on integratorcp
* add a missing 'compatible' property for Cortex-A57
* add Netduino 2 machine model
* fix command line parsing bug for CPU options with multiple CPUs
# gpg: Signature made Wed Mar 11 14:14:22 2015 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20150311:
bitops.h: sextract64() return type should be int64_t, not uint64_t
integrator/cp: Implement CARDIN and WPROT signals
integrator/cp: Model CP control registers as sysbus device
target-arm: Add missing compatible property to A57
netduino2: Add the Netduino 2 Machine
stm32f205: Add the stm32f205 SoC
stm32f2xx_SYSCFG: Add the stm32f2xx SYSCFG
stm32f2xx_USART: Add the stm32f2xx USART Controller
stm32f2xx_timer: Add the stm32f2xx Timer
hw/arm/virt: fix cmdline parsing bug with CPU options and smp > 1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- an extension to the elf loader to allow relocations
- make the ccw bios relocatable. This allows for bigger ramdisks
or smaller guests
- Handle all slow SIGPs in QEMU (instead of kernel) for better
compliance and correctness
- tell the KVM module the maximum guest size. This allows KVM
to reduce the number or page table levels
- Several fixes/cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=6Cw+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20150310' into staging
s390x/kvm: Features and fixes for 2.3
- an extension to the elf loader to allow relocations
- make the ccw bios relocatable. This allows for bigger ramdisks
or smaller guests
- Handle all slow SIGPs in QEMU (instead of kernel) for better
compliance and correctness
- tell the KVM module the maximum guest size. This allows KVM
to reduce the number or page table levels
- Several fixes/cleanups
# gpg: Signature made Wed Mar 11 10:17:13 2015 GMT using RSA key ID B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
* remotes/borntraeger/tags/s390x-20150310:
s390-ccw: rebuild BIOS
s390/bios: Make the s390-ccw.img relocatable
elf-loader: Provide the possibility to relocate s390 ELF files
s390-ccw.img: Reinitialize guessing on reboot
s390-ccw.img: Allow bigger ramdisk sizes or offsets
s390x/kvm: passing max memory size to accelerator
virtio-ccw: Convert to realize()
virtio-s390: Convert to realize()
virtio-s390: s390_virtio_device_init() can't fail, simplify
s390x/kvm: enable the new SIGP handling in user space
s390x/kvm: deliver SIGP RESTART directly if stopped
s390x: add function to deliver restart irqs
s390x/kvm: SIGP START is only applicable when STOPPED
s390x/kvm: implement handling of new SIGP orders
s390x/kvm: trace all SIGP orders
s390x/kvm: helper to set the SIGP status in SigpInfo
s390x/kvm: pass the SIGP instruction parameter to the SIGP handler
s390x/kvm: more details for SIGP handler with one destination vcpu
s390x: introduce defines for SIGP condition codes
synchronize Linux headers to 4.0-rc3
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The documentation for sextract64() claims that the return type is
an int64_t, but the code itself disagrees. Fix the return type to
conform to the documentation and to bring it into line with
sextract32(), which returns int32_t.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1423231328-15662-1-git-send-email-peter.maydell@linaro.org
This patch adds the stm32f205 SoC. This will be used by the
Netduino 2 to create a machine.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 48d509747a1ea0d8a7d5480560495e679990f9d2.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the stm32f2xx System Configuration
Controller. This is used to configure what memory is mapped
at address 0 (although that is not supported) as well
as configure how the EXTI interrupts work (also not
supported at the moment).
This device is not required for basic examples, but more
complex systems will require it (as well as the EXTI device)
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 5d499d7b60b61d5d6dcb310b2e55411b1f53794e.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the stm32f2xx USART controller
(UART also uses the same controller).
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 762c6c0d2a41d574932bc4445ec9bfffe6da8798.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the stm32f2xx timers: TIM2, TIM3, TIM4 and TIM5
to QEMU.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 155091a323390f8da3cca496e4c611c493e62a77.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
code assigning APIC ID.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABCAAGBQJU/gVGAAoJECgHk2+YTcWmGmgQAKE/tDoKt2Uw5BjWxmmU0GFm
r4m43rcR3xfHdQyEx3iNKSlAQvxcYd/eBM5kb6Ir7wjhqtDfoiVC+bui3VhAsQPk
kaB+6ryyAGDV2xt1UtgfzEodXl9aw0zofFBafJrtArITAsO5UeuTQhxIuLHwzcF6
XKkpg7oz3bgRH57gZFi1y5PUdJUpmk4awipE/A4G/y5mERe2W30Ku4JSSxV7+shz
MLOQF4GjfHBKnfA/PVQbtWQjbKVZRPbGrcg+TmEH+2TGzEMVXeXuqvAgbOGhhlcD
uJyiCeXf1CD92JIU2JWXejd0SSLLJyf74TiBEhxfFil3gpS+d5RWSCkuR1mmtpR4
B5NPbhhPZmXJBMIQB9kM0fiW4I8+qPPqFatqEJ78OYhVqUHgY746hnJTc22jK/FK
e1UxLBREMLAty4aVT3iAaPZo6hM/IMctEOgEhwH15NSQDNXFIqrlM/b5OJ9Iq01Y
Ah838rv4kRiVQcKoa1Mg8rqBvmw4Cm1MKcYp4sOPhY4/bwx71qagbZG4EAfQ6DP6
uieN/4hMTuGqf4eHgIjrdAr/4sPPiszYjF6fVwJVh+pCbirWOsRQPx4NnSmIRveU
CUJuuHCsqWjThMEWVNqe5bm1d32EI0o16ihEBuBl+MqivpmV+4p/bJYvyiC1vJw7
UatzprZMm2Az2RL6W6Mw
=iDzB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
X86 patches queued in the last few weeks. Mostly code cleanup and changes on
code assigning APIC ID.
# gpg: Signature made Mon Mar 9 20:40:38 2015 GMT using RSA key ID 984DC5A6
# gpg: Can't check signature: public key not found
* remotes/ehabkost/tags/x86-pull-request:
target-i386: Require APIC ID to be explicitly set before CPU realize
target-i386: Move APIC ID compatibility code to pc.c
target-i386: Move CPUX86State::cpuid_apic_id to X86CPU::apic_id
target-i386: Remove unused APIC ID default code
target-i386: Eliminate unnecessary get_cpuid_vendor() function
target-i386: Simplify listflags() function
target-i386: Move topology.h to include/hw/i386
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJU/vQnAAoJEFvCxW+uDzIfSHQIAKLVePJyOEtVA5OOUSyuA5TQ
6MNXg1X+PxD0GT8iyKhcyHqaRSibPjY/D2Hb8MyNt/lLIQj13hfL1fXXAMvnjY1+
WcCpGfbZmmcIpgjY+OWkkSVU3nSxNE6a0ZgdOvK9Cvc+dJHMpO02E5kRqig6nYX6
UuA7aIgjE2T63PPucuEjFVA4a8v7NsqO4OBmYPO/L7KEpAQk3Y/qDDGahQRXuBXl
0poyJrj99BoKHJFemf7L79SbpZHrnaQ54dndqerq5tzmBXRVjhYJa/iLm0LSjPnN
kWdlMKXSGgI/rFRWZqfOk+jDIZb21xliM6y/lDpDJGdoC1aPsIWwQ0mFK6ZPVDo=
=Ee+Y
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-signed' into staging
qemu-sparc update
# gpg: Signature made Tue Mar 10 13:39:51 2015 GMT using RSA key ID AE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
* remotes/mcayland/tags/qemu-sparc-signed:
sun4u: switch m48t59 NVRAM to MMIO access
MAINTAINERS: add myself as SPARC maintainer
doc: minor updates to SPARC32 and SPARC64 documentation
m48t59: add m48t59 sysbus device
m48t59: introduce new base-year qdev property
m48t59: let init functions return a Nvram object
m48t59: add a Nvram interface
m48t59: register a QOM type for each nvram type we support
m48t59: move ISA ports/memory regions registration to QOM constructor
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity/sparse fix for iscsi driver
- RCU fallout: fix -daemonize and s390x system emulation
- KVM: kvm_stat improvements and new man page
- x86: SYSRET fix for VxWorks
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJU/sUFAAoJEL/70l94x66D1JwIAJ28Lan2DQwi+xHvNxF8zW6n
v7eMc04/fepuon0TYmUZC3qbqc00sccEQZQ+yAAauT9epZ/kdSDudDOzG+3F4MuQ
/X3crXw2/jrhtWedGq49vFCONX4MKoaoudqK8kOFMe1ImQgkOYeAzOoqeFXyHsFh
jINlKTJZB6oKzrZ+SYryY14cO7pvGaIhyqaCC+6GcVihTjm9Yq13lP1lFj7LsVRV
aGfd6xH9RSV/mwzvZwD4i3cUWSUaV/wY0NDhAEzDPCUcxX0/nAj3XF1YeJUF30Qd
ETaCLo/Nxq2R6POK3c/Zm/FRLvjzZ2caD+q1LcwB/bCYdc2lJ1JDxE/hr48ANv0=
=OWXY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- scsi: improvements to error reporting and conversion to realize,
Coverity/sparse fix for iscsi driver
- RCU fallout: fix -daemonize and s390x system emulation
- KVM: kvm_stat improvements and new man page
- x86: SYSRET fix for VxWorks
# gpg: Signature made Tue Mar 10 10:18:45 2015 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
x86: fix SS selector in SYSRET
scsi: Convert remaining PCI HBAs to realize()
scsi: Improve error reporting for invalid drive property
hw: Propagate errors through qdev_prop_set_drive()
scsi: Clean up duplicated error in legacy if=scsi code
cpus: initialize cpu->memory_dispatch
rcu: handle forks safely
qemu-thread: do not use PTHREAD_MUTEX_ERRORCHECK
kvm_stat: add kvm_stat.1 man page
kvm_stat: add column headers to text UI
iscsi: Fix check for username
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CPUClass QOM methods virtio_is_big_endian, write_elf{32,64}_note
and write_elf{32,64}_qemunote were added without any description
being added to the doc comment. Correct this omission.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=hlbC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches for 2.3
# gpg: Signature made Tue Mar 10 13:03:17 2015 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (73 commits)
MAINTAINERS: Add jcody as blockjobs, block devices maintainer
iotests: add O_DIRECT alignment probing test
block/raw-posix: fix launching with failed disks
MAINTAINERS: Add jsnow as IDE maintainer
sheepdog: Fix misleading error messages in sd_snapshot_create()
Add testcase for scsi-hd devices without drive property
scsi-hd: fix property unset case
block/vdi: Add locking for parallel requests
iotests: Drop vpc from 004's and 104's format list
iotests: Remove 006
iotests: Fix 051's reference output
virtio-blk: Remove the stale FIXME comment
tests: Check QVIRTIO_F_ANY_LAYOUT flag in virtio-blk test
libqos: Solve bug in interrupt checking when using MSIX in virtio-pci.c
sheepdog: fix confused return values
qtest/ahci: add fragmented dma test
qtest/ahci: Add PIO and LBA48 tests
qtest/ahci: Add DMA test variants
libqos/ahci: add ahci command helpers
qtest/ahci: Add a macro bootup routine
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
geometry: hd_geometry_guess function autodetects the drive geometry.
This patch adds a block backend call, that probes the backing device
geometry. If the inner driver method is implemented and succeeds
(currently only for DASDs), the blkconf_geometry will pass-through
the backing device geometry. Otherwise will fallback to old logic.
blocksize: This patch initializes blocksize properties to 0.
In order to set the property a blkconf_blocksizes was introduced.
If user didn't set physical or logical blocksize, it will
retrieve its value from a driver (only succeeds for DASD), otherwise
it will set default 512 value.
The blkconf_blocksizes call was added to all users of BlkConf.
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424087278-49393-6-git-send-email-tumanova@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424087278-49393-5-git-send-email-tumanova@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add driver functions for geometry and blocksize detection
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424087278-49393-2-git-send-email-tumanova@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a creation option to qcow2 for setting the refcount order of images
to be created, and respect that option's value.
This breaks some test outputs, fix them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This way the generated id will be stored in -writeconfig cfg files.
Also we can make vnc_auto_assign_id() local to vnc.c.
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Three kinds of callers:
1. On failure, report the error and abort
Passing &error_abort does the job. No functional change.
2. On failure, report the error and exit()
This is qdev_prop_set_drive_nofail(). Error reporting moves from
qdev_prop_set_drive() to its caller. Because hiding away the error
in the monitor right before exit() isn't helpful, replace
qerror_report_err() by error_report_err(). Shouldn't make a
difference, because qdev_prop_set_drive_nofail() should never be
used in QMP context.
3. On failure, report the error and recover
This is usb_msd_init() and scsi_bus_legacy_add_drive(). Error
reporting and freeing the error object moves from
qdev_prop_set_drive() to its callers.
Because usb_msd_init() can't run in QMP context, replace
qerror_report_err() by error_report_err() there.
No functional change.
scsi_bus_legacy_add_drive() calling qerror_report_err() is of
course inappropriate, but this commit merely makes it more obvious.
The next one will clean it up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425925048-15482-3-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the m48t59 device uses the hardware model in order to determine
whether the year value is offset from the hardware value. As this will
soon be required by the x59 model, create a qdev base-year property to
represent the base year and update the callers appropriately.
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
CC: Andreas Färber <afaerber@suse.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Remove left-overs from header file.
Move some functions only used by PReP to hw/ppc/prep.c
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
CC: Andreas Färber <afaerber@suse.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
On s390, we would like to load our "BIOS" s390-ccw.img to the end of the
RAM. Therefor we need the possibility to relocate the ELF file so that
it can also run from different addresses. This patch adds the necessary
code to the QEMU ELF loader function.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Message-Id: <1425895973-15239-2-git-send-email-thuth@linux.vnet.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The function is not used anymore, and thus can be deleted.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Remove qemu_console_displaystate(), qemu_remove_kbd_event_handler(),
qemu_different_endianness_pixelformat() and cpkey(), since they are
completely unused.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This will allow the PC code to use the header, and lets us eliminate the
QEMU_INCLUDES hack inside tests/Makefile.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The emulation for EEH RTAS requests from guest isn't covered
by QEMU yet and the patch implements them.
The patch defines constants used by EEH RTAS calls and adds
callbacks sPAPRPHBClass::{eeh_set_option, eeh_get_state, eeh_reset,
eeh_configure}, which are going to be used as follows:
* RTAS calls are received in spapr_pci.c, sanity check is done
there.
* RTAS handlers handle what they can. If there is something it
cannot handle and the corresponding sPAPRPHBClass callback is
defined, it is called.
* Those callbacks are only implemented for VFIO now. They do ioctl()
to the IOMMU container fd to complete the calls. Error codes from
that ioctl() are transferred back to the guest.
[aik: defined RTAS tokens for EEH RTAS calls]
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Bonus fix: always set an error on failure. Some failures were silent
before, except for the generic error set by device_realize().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
