Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190814020218.1868-2-quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently we are doing log_clear() right after log_sync() which mostly
keeps the old behavior when log_clear() was still part of log_sync().
This patch tries to further optimize the migration log_clear() code
path to split huge log_clear()s into smaller chunks.
We do this by spliting the whole guest memory region into memory
chunks, whose size is decided by MigrationState.clear_bitmap_shift (an
example will be given below). With that, we don't do the dirty bitmap
clear operation on the remote node (e.g., KVM) when we fetch the dirty
bitmap, instead we explicitly clear the dirty bitmap for the memory
chunk for each of the first time we send a page in that chunk.
Here comes an example.
Assuming the guest has 64G memory, then before this patch the KVM
ioctl KVM_CLEAR_DIRTY_LOG will be a single one covering 64G memory.
If after the patch, let's assume when the clear bitmap shift is 18,
then the memory chunk size on x86_64 will be 1UL<<18 * 4K = 1GB. Then
instead of sending a big 64G ioctl, we'll send 64 small ioctls, each
of the ioctl will cover 1G of the guest memory. For each of the 64
small ioctls, we'll only send if any of the page in that small chunk
was going to be sent right away.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190603065056.25211-12-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It uses num in multifd_send(). Make it coherent.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
- Rebase last pull request
- Drop multifd
- several other minor fixesLaLaLa
-----BEGIN PGP SIGNATURE-----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=kjyq
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration-pull-request' into staging
Pull request
- Rebase last pull request
- Drop multifd
- several other minor fixesLaLaLa
# gpg: Signature made Mon 25 Mar 2019 17:46:29 GMT
# gpg: using RSA key F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/migration-pull-request:
migration/postcopy: Update the bandwidth during postcopy
Migration/colo.c: Make user obtain the last COLO mode info after failover
Migration/colo.c: Add the necessary checks for colo_do_failover
Migration/colo.c: Add new COLOExitReason to handle all failover state
Migration/colo.c: Fix COLO failover status error
migration/rdma: Check qemu_rdma_init_one_block
migration: add support for a "tls-authz" migration parameter
multifd: Drop x-
multifd: Add some padding
multifd: Change default packet size
multifd: Be flexible about packet size
multifd: Drop x-multifd-page-count parameter
multifd: Create new next_packet_size field
multifd: Rename "size" member to pages_alloc
multifd: Only send pages when packet are not empty
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need to send this field when we add compression support. As we are
still on x- stage, we can do this kind of changes.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of cleanup-trace-events.pl. Same funnies as in the
previous commit, of course. Manually shorten its change to
linux-user/trace-events to */signal.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-6-armbru@redhat.com
Message-Id: <20190314180929.27722-6-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Switch the announcements to using the new announce timer.
Move the code that does it to announce.c rather than savevm
because it really has nothing to do with the actual migration.
Migration starts the announce from bh's and so they're all
in the main thread/bql, and so there's never any racing with
the timers themselves.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
During the time of VM's running, PVM may dirty some pages, we will transfer
PVM's dirty pages to SVM and store them into SVM's RAM cache at next checkpoint
time. So, the content of SVM's RAM cache will always be same with PVM's memory
after checkpoint.
Instead of flushing all content of PVM's RAM cache into SVM's MEMORY,
we do this in a more efficient way:
Only flush any page that dirtied by PVM since last checkpoint.
In this way, we can ensure SVM's memory same with PVM's.
Besides, we must ensure flush RAM cache before load device state.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We need to know if migration is going into COLO state for
incoming side before start normal migration.
Instead by using the VMStateDescription to send colo_state
from source side to destination side, we use MIG_CMD_ENABLE_COLO
to indicate whether COLO is enabled or not.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We synchronize all threads each RAM_SAVE_FLAG_EOS. Bitmap
synchronizations don't happen inside a ram section, so we are safe
about two channels trying to overwrite the same memory.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
seq needs to be atomic now, will also be accessed from main thread.
Fix the if (true || ...) leftover
We are back to non-atomics
We want to know how many pages/packets each channel has sent. Add
counters for those.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
sort trace-events (dave)
Only one existing trace event uses a floating point type. Unfortunately
float and double cannot be supported since SystemTap does not have
floating point types.
Remove float and double from the whitelist and document this limitation.
Update the migrate_transferred trace event to use uint64_t instead of
double.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20180621150254.4922-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rate limiting sleeps the migration thread for a while when it runs
out of bandwidth; but sometimes we want to wake up to get on with
something more urgent (like a postcopy request). Here we use
a semaphore with a timedwait instead of a simple sleep; Incrementing
the sempahore will wake it up sooner. Anything that consumes
these urgent events must decrement the sempahore.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180613102642.23995-3-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When cancel migration during RDMA precopy, the source qemu main thread hangs sometime.
The backtrace is:
(gdb) bt
#0 0x00007f249eabd43d in write () from /lib64/libpthread.so.0
#1 0x00007f24a1ce98e4 in rdma_get_cm_event (channel=0x4675d10, event=0x7ffe2f643dd0) at src/cma.c:2189
#2 0x00000000007b6166 in qemu_rdma_cleanup (rdma=0x6784000) at migration/rdma.c:2296
#3 0x00000000007b7cae in qio_channel_rdma_close (ioc=0x3bfcc30, errp=0x0) at migration/rdma.c:2999
#4 0x00000000008db60e in qio_channel_close (ioc=0x3bfcc30, errp=0x0) at io/channel.c:273
#5 0x00000000007a8765 in channel_close (opaque=0x3bfcc30) at migration/qemu-file-channel.c:98
#6 0x00000000007a71f9 in qemu_fclose (f=0x527c000) at migration/qemu-file.c:334
#7 0x0000000000795b96 in migrate_fd_cleanup (opaque=0x3b46280) at migration/migration.c:1162
#8 0x000000000093a71b in aio_bh_call (bh=0x3db7a20) at util/async.c:90
#9 0x000000000093a7b2 in aio_bh_poll (ctx=0x3b121c0) at util/async.c:118
#10 0x000000000093f2ad in aio_dispatch (ctx=0x3b121c0) at util/aio-posix.c:436
#11 0x000000000093ab41 in aio_ctx_dispatch (source=0x3b121c0, callback=0x0, user_data=0x0)
at util/async.c:261
#12 0x00007f249f73c7aa in g_main_context_dispatch () from /lib64/libglib-2.0.so.0
#13 0x000000000093dc5e in glib_pollfds_poll () at util/main-loop.c:215
#14 0x000000000093dd4e in os_host_main_loop_wait (timeout=28000000) at util/main-loop.c:263
#15 0x000000000093de05 in main_loop_wait (nonblocking=0) at util/main-loop.c:522
#16 0x00000000005bc6a5 in main_loop () at vl.c:1944
#17 0x00000000005c39b5 in main (argc=56, argv=0x7ffe2f6443f8, envp=0x3ad0030) at vl.c:4752
It does not get the RDMA_CM_EVENT_DISCONNECTED event after rdma_disconnect sometime.
According to IB Spec once active side send DREQ message, it should wait for DREP message
and only once it arrived it should trigger a DISCONNECT event. DREP message can be dropped
due to network issues.
For that case the spec defines a DREP_timeout state in the CM state machine, if the DREP is
dropped we should get a timeout and a TIMEWAIT_EXIT event will be trigger.
Unfortunately the current kernel CM implementation doesn't include the DREP_timeout state
and in above scenario we will not get DISCONNECT or TIMEWAIT_EXIT events.
So it should not invoke rdma_get_cm_event which may hang forever, and the event channel
is also destroyed in qemu_rdma_cleanup.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
After we updated the dirty bitmaps of ramblocks, we also need to update
the critical fields in RAMState to make sure it is ready for a resume.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-18-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch implements the first part of core RAM resume logic for
postcopy. ram_resume_prepare() is provided for the work.
When the migration is interrupted by network failure, the dirty bitmap
on the source side will be meaningless, because even the dirty bit is
cleared, it is still possible that the sent page was lost along the way
to destination. Here instead of continue the migration with the old
dirty bitmap on source, we ask the destination side to send back its
received bitmap, then invert it to be our initial dirty bitmap.
The source side send thread will issue the MIG_CMD_RECV_BITMAP requests,
once per ramblock, to ask for the received bitmap. On destination side,
MIG_RP_MSG_RECV_BITMAP will be issued, along with the requested bitmap.
Data will be received on the return-path thread of source, and the main
migration thread will be notified when all the ramblock bitmaps are
synchronized.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-17-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This is hook function to be called when a postcopy migration wants to
resume from a failure. For each module, it should provide its own
recovery logic before we switch to the postcopy-active state.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-16-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Creating new message to reply for MIG_CMD_POSTCOPY_RESUME. One uint32_t
is used as payload to let the source know whether destination is ready
to continue the migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-15-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introducing this new command to be sent when the source VM is ready to
resume the paused migration. What the destination does here is
basically release the fault thread to continue service page faults.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-14-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introducing new return path message MIG_RP_MSG_RECV_BITMAP to send
received bitmap of ramblock back to source.
This is the reply message of MIG_CMD_RECV_BITMAP, it contains not only
the header (including the ramblock name), and it was appended with the
whole ramblock received bitmap on the destination side.
When the source receives such a reply message (MIG_RP_MSG_RECV_BITMAP),
it parses it, convert it to the dirty bitmap by inverting the bits.
One thing to mention is that, when we send the recv bitmap, we are doing
these things in extra:
- converting the bitmap to little endian, to support when hosts are
using different endianess on src/dst.
- do proper alignment for 8 bytes, to support when hosts are using
different word size (32/64 bits) on src/dst.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-13-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add a new vm command MIG_CMD_RECV_BITMAP to request received bitmap for
one ramblock.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-12-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Allows the fault thread to stop handling page faults temporarily. When
network failure happened (and if we expect a recovery afterwards), we
should not allow the fault thread to continue sending things to source,
instead, it should halt for a while until the connection is rebuilt.
When the dest main thread noticed the failure, it kicks the fault thread
to switch to pause state.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-7-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Let the thread pause for network issues.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-6-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When there is IO error on the incoming channel (e.g., network down),
instead of bailing out immediately, we allow the dst vm to switch to the
new POSTCOPY_PAUSE state. Currently it is still simple - it waits the
new semaphore, until someone poke it for another attempt.
One note is that here on ram loading thread we cannot detect the
POSTCOPY_ACTIVE state, but we need to detect the more specific
POSTCOPY_INCOMING_RUNNING state, to make sure we have already loaded all
the device states.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-5-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Now when network down for postcopy, the source side will not fail the
migration. Instead we convert the status into this new paused state, and
we will try to wait for a rescue in the future.
If a recovery is detected, migration_thread() will reset its local
variables to prepare for that.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-4-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Postcopy total blocktime is available on destination side only.
But query-migrate was possible only for source. This patch
adds ability to call query-migrate on destination.
To be able to see postcopy blocktime, need to request postcopy-blocktime
capability.
The query-migrate command will show following sample result:
{"return":
"postcopy-vcpu-blocktime": [115, 100],
"status": "completed",
"postcopy-blocktime": 100
}}
postcopy_vcpu_blocktime contains list, where the first item is the first
vCPU in QEMU.
This patch has a drawback, it combines states of incoming and
outgoing migration. Ongoing migration state will overwrite incoming
state. Looks like better to separate query-migrate for incoming and
outgoing migration or add parameter to indicate type of migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1521742647-25550-7-git-send-email-a.perevalov@samsung.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch provides blocktime calculation per vCPU,
as a summary and as a overlapped value for all vCPUs.
This approach was suggested by Peter Xu, as an improvements of
previous approch where QEMU kept tree with faulted page address and cpus bitmask
in it. Now QEMU is keeping array with faulted page address as value and vCPU
as index. It helps to find proper vCPU at UFFD_COPY time. Also it keeps
list for blocktime per vCPU (could be traced with page_fault_addr)
Blocktime will not calculated if postcopy_blocktime field of
MigrationIncomingState wasn't initialized.
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1521742647-25550-4-git-send-email-a.perevalov@samsung.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cause the vhost-user client to be woken up whenever:
a) We place a page in postcopy mode
b) We get a fault and the page has already been received
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provide a helper to send a 'wake' request on a userfaultfd for
a shared process.
The address in the clients address space is specified together
with the RAMBlock it was resolved to.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provide a helper to be used by shared waker functions to request
shared pages from the source.
The last_rb pointer is moved into the incoming state since this
helper can update it as well as the main fault thread function.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow other userfaultfd's to be registered into the fault thread
so that handlers for shared memory can get responses.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Postcopy migration of dirty bitmaps. Only named dirty bitmaps are migrated.
If destination qemu is already containing a dirty bitmap with the same name
as a migrated bitmap (for the same node), then, if their granularities are
the same the migration will be done, otherwise the error will be generated.
If destination qemu doesn't contain such bitmap it will be created.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180313180320.339796-12-vsementsov@virtuozzo.com
[Changed '+' to '*' as per list discussion. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
There would be savevm states (dirty-bitmap) which can migrate only in
postcopy stage. The corresponding pending is introduced here.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180313180320.339796-6-vsementsov@virtuozzo.com
Route async errors (especially from sockets) down through
migration_channel_connect and on to migrate_fd_connect where they
can be cleaned up.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This reverts commits
ca6011c migration: add postcopy total blocktime into query-migrate
5f32dc8 migration: add blocktime calculation into migration-test
2f7dae9 migration: postcopy_blocktime documentation
3be98be migration: calculate vCPU blocktime on dst side
01a87f0 migration: add postcopy blocktime ctx into MigrationIncomingState
31bf06a migration: introduce postcopy-blocktime capability
as they don't build on ppc32 due to trying to do atomic accesses
on types that are larger than the host pointer type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Postcopy total blocktime is available on destination side only.
But query-migrate was possible only for source. This patch
adds ability to call query-migrate on destination.
To be able to see postcopy blocktime, need to request postcopy-blocktime
capability.
The query-migrate command will show following sample result:
{"return":
"postcopy-vcpu-blocktime": [115, 100],
"status": "completed",
"postcopy-blocktime": 100
}}
postcopy_vcpu_blocktime contains list, where the first item is the first
vCPU in QEMU.
This patch has a drawback, it combines states of incoming and
outgoing migration. Ongoing migration state will overwrite incoming
state. Looks like better to separate query-migrate for incoming and
outgoing migration or add parameter to indicate type of migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch provides blocktime calculation per vCPU,
as a summary and as a overlapped value for all vCPUs.
This approach was suggested by Peter Xu, as an improvements of
previous approch where QEMU kept tree with faulted page address and cpus bitmask
in it. Now QEMU is keeping array with faulted page address as value and vCPU
as index. It helps to find proper vCPU at UFFD_COPY time. Also it keeps
list for blocktime per vCPU (could be traced with page_fault_addr)
Blocktime will not calculated if postcopy_blocktime field of
MigrationIncomingState wasn't initialized.
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Check the return value of pre_save state and fail vmstate_save_state
if the pre_save failed.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-3-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Strings are more readable for debugging.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1504081950-2528-5-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up merge with 977c73
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We need to do things at load time and at cleanup time.
Signed-off-by: Juan Quintela <quintela@redhat.com>
--
Move the printing of the error message so we can print the device
giving the error.
Add call to postcopy stuff
Message-Id: <20170628095228.4661-4-quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We are going to use it now for more than save live regions.
Once there rename qemu_savevm_state_begin() to qemu_savevm_state_setup().
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170628095228.4661-2-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There are some places that binded "return path" with postcopy. Let's be
prepared for its usage even without postcopy. This patch mainly did this
on source side.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
A couple more traces that would have made fixing that postcopy
bug a bit easier.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We use an unsigned long for the page number. Notice that our bitmaps
already got that for the index, so we have that limit.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
rename page to page_abs everywhere.
fix trace types for pages
Create ram_block_discard_range in exec.c to replace
postcopy_ram_discard_range and most of ram_discard_range.
Those two routines are a bit of a weird combination, and
ram_discard_range is about to get more complex for hugepages.
It's OS dependent code (so shouldn't be in migration/ram.c) but
it needs quite a bit of the innards of RAMBlock so doesn't belong in
the os*.c.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-5-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There are a number of unused trace events that
scripts/cleanup-trace-events.pl finds. The "hw/vfio/pci-quirks.c"
filename was typoed and "qapi/qapi-visit-core.c" was missing the qapi/
directory prefix.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170126171613.1399-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add some tracing to vmstate_subsection_save and vmstate_save_state
to help in debugging when you're not sure if a conditional piece
of data is being saved.
In vmstate_subsection_save I renamed the inner vmsd to avoid the aliasing
and be able to print both names.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20161212125838.14425-1-dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
So we can remove DPRINTF() macro
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1485207141-1941-2-git-send-email-quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up 'remained/remaining' as requested by Eric
Currently we cannot directly transfer a QTAILQ instance because of the
limitation in the migration code. Here we introduce an approach to
transfer such structures. We created VMStateInfo vmstate_info_qtailq
for QTAILQ. Similar VMStateInfo can be created for other data structures
such as list.
When a QTAILQ is migrated from source to target, it is appended to the
corresponding QTAILQ structure, which is assumed to have been properly
initialized.
This approach will be used to transfer pending_events and ccs_list in spapr
state.
We also create some macros in qemu/queue.h to access a QTAILQ using pointer
arithmetic. This ensures that we do not depend on the implementation
details about QTAILQ in the migration code.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Message-Id: <1484852453-12728-3-git-send-email-duanj@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When handling failover, COLO processes differently according to
the different stage of failover process, here we introduce a global
atomic variable to record the status of failover.
We add four failover status to indicate the different stage of failover process.
You should use the helpers to get and set the value.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
We need communications protocol of user-defined to control
the checkpointing process.
The new checkpointing request is started by Primary VM,
and the interactive process like below:
Checkpoint synchronizing points:
Primary Secondary
initial work
'checkpoint-ready' <-------------------- @
'checkpoint-request' @ -------------------->
Suspend (Only in hybrid mode)
'checkpoint-reply' <-------------------- @
Suspend&Save state
'vmstate-send' @ -------------------->
Send state Receive state
'vmstate-received' <-------------------- @
Release packets Load state
'vmstate-load' <-------------------- @
Resume Resume (Only in hybrid mode)
Start Comparing (Only in hybrid mode)
NOTE:
1) '@' who sends the message
2) Every sync-point is synchronized by two sides with only
one handshake(single direction) for low-latency.
If more strict synchronization is required, a opposite direction
sync-point should be added.
3) Since sync-points are single direction, the remote side may
go forward a lot when this side just receives the sync-point.
4) For now, we only support 'periodic' checkpoint, for which
the Secondary VM is not running, later we will support 'hybrid' mode.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Add a new migration state: MIGRATION_STATUS_COLO. Migration source side
enters this state after the first live migration successfully finished
if COLO is enabled by command 'migrate_set_capability x-colo on'.
We reuse migration thread, so the process of checkpointing will be handled
in migration thread.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Move all trace-events for files in the migration/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-6-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
