We're seeing timeouts for this test on CI runs (specifically for
ubuntu-20.04-s390x-all). It doesn't fail consistently, but even the
successful runs take about 27 or 28 seconds, which is not very far from
the 30 seconds timeout.
Bump the timeout a bit to make failure less likely even on this CI host.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240125165803.48373-1-kwolf@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 63b18312d1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When running the tests in slow mode on a very loaded system and with
--enable-debug, the test-crypto-block can take longer than 4 minutes.
Bump the timeout to 5 minutes to make sure that it also passes in
such situations.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-15-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
(cherry picked from commit e1b363e328)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When running the tests in slow mode on a very loaded system and with
--enable-debug, the test-aio-multithread can take longer than 1 minute.
Bump the timeout to two minutes to make sure that it also passes in
such situations.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-14-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
(cherry picked from commit c45f8f1aef)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The block .save_setup() handler calls a helper routine
init_blk_migration() which builds a list of block devices to take into
account for migration. When one device is found to be empty (sectors
== 0), the loop exits and all the remaining devices are ignored. This
is a regression introduced when bdrv_iterate() was removed.
Change that by skipping only empty devices.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Fixes: fea68bb6e9 ("block: Eliminate bdrv_iterate(), use bdrv_next()")
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Link: https://lore.kernel.org/r/20240312120431.550054-1-clg@redhat.com
[peterx: fix "Suggested-by:"]
Signed-off-by: Peter Xu <peterx@redhat.com>
(cherry picked from commit 2e128776dc)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
With a numa set up such as
-numa nodeid=0,cpus=0 \
-numa nodeid=1,memdev=mem \
-numa nodeid=2,cpus=1
and appropriate hmat_lb entries the initiator list is correctly
computed and writen to HMAT as 0,2 but then the LB data is accessed
using the node id (here 2), landing outside the entry_list array.
Stash the reverse lookup when writing the initiator list and use
it to get the correct array index index.
Fixes: 4586a2cb83 ("hmat acpi: Build System Locality Latency and Bandwidth Information Structure(s)")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240307160326.31570-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 74e2845c5f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The guest may write NumVFs greater than TotalVFs and that can lead
to buffer overflow in VF implementations.
Cc: qemu-stable@nongnu.org
Fixes: CVE-2024-26327
Fixes: 7c0fa8dff8 ("pcie: Add support for Single Root I/O Virtualization (SR/IOV)")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240228-reuse-v8-2-282660281e60@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>
(cherry picked from commit 6081b4243c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
nvme_sriov_pre_write_ctrl() used to directly inspect SR-IOV
configurations to know the number of VFs being disabled due to SR-IOV
configuration writes, but the logic was flawed and resulted in
out-of-bound memory access.
It assumed PCI_SRIOV_NUM_VF always has the number of currently enabled
VFs, but it actually doesn't in the following cases:
- PCI_SRIOV_NUM_VF has been set but PCI_SRIOV_CTRL_VFE has never been.
- PCI_SRIOV_NUM_VF was written after PCI_SRIOV_CTRL_VFE was set.
- VFs were only partially enabled because of realization failure.
It is a responsibility of pcie_sriov to interpret SR-IOV configurations
and pcie_sriov does it correctly, so use pcie_sriov_num_vfs(), which it
provides, to get the number of enabled VFs before and after SR-IOV
configuration writes.
Cc: qemu-stable@nongnu.org
Fixes: CVE-2024-26328
Fixes: 11871f53ef ("hw/nvme: Add support for the Virtualization Management command")
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240228-reuse-v8-1-282660281e60@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 91bb64a8d2)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
igb can use this function to change its behavior depending on the
number of virtual functions currently enabled.
Signed-off-by: Gal Hammer <gal.hammer@sap.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 31180dbdca)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: needed for v8.2.0-2290-g91bb64a8d2
"hw/nvme: Use pcie_sriov_num_vfs()" (CVE-2024-26328))
Commit 1901b4967c ("hw/block/nvme: move msix table and pba to BAR 0")
moved the MSI-X table and PBA to BAR 0 to make room for enabling CMR and
PMR at the same time. As reported by Julien Grall in #2184, this breaks
migration through system hibernation.
Add a machine compatibility parameter and set it on machines pre 6.0 to
enable the old behavior automatically, restoring the hibernation
migration support.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2184
Fixes: 1901b4967c ("hw/block/nvme: move msix table and pba to BAR 0")
Reported-by: Julien Grall julien@xen.org
Tested-by: Julien Grall julien@xen.org
Reviewed-by: Jesper Wendel Devantier <foss@defmacro.it>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit fa905f65c5)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Generalize the mbar size helper such that it can handle cases where the
MSI-X table and PBA are expected to be in an exclusive bar.
Cc: qemu-stable@nongnu.org
Reviewed-by: Jesper Wendel Devantier <foss@defmacro.it>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit ee7bda4d38)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, when a VF is created, it uses the 'params' object of the PF
as it is. In other words, the 'params.serial' string memory area is also
shared. In this situation, if the VF is removed from the system, the
PF's 'params.serial' object is released with object_finalize() followed
by object_property_del_all() which release the memory for 'serial'
property. If that happens, the next VF created will inherit a serial
from a corrupted memory area.
If this happens, an error will occur when comparing subsys->serial and
n->params.serial in the nvme_subsys_register_ctrl() function.
Cc: qemu-stable@nongnu.org
Fixes: 44c2c09488 ("hw/nvme: Add support for SR-IOV")
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit 4f0a4a3d58)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Replace the local Error variable with errp and ERRP_GUARD() and change
the return value to bool.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit 973f76cf77)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: needed for v8.2.0-2319-gfa905f65c5
"hw/nvme: add machine compatibility parameter to enable msix exclusive bar")
Remove an unnecessary local Error value in nvme_realize(). In the
process, change nvme_check_constraints() to return a bool.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit 784fd35387)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: needed for v8.2.0-2319-gfa905f65c5
"hw/nvme: add machine compatibility parameter to enable msix exclusive bar")
There is no guarantee that the PCNetState is allocated such that
csr[8] is allocated on an 8-byte boundary. Since not all hosts are
capable of unaligned fetches the 16-bit elements need to be fetched
individually to avoid a potential fault. Closes issue #2143
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2143
Signed-off-by: Nick Briggs <nicholas.h.briggs@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 6a5287ce80)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
On resume e1000e_vm_state_change() always calls e1000e_autoneg_resume()
that sets link_down to false, and thus activates the link even
if we have disabled it.
The problem can be reproduced starting qemu in paused state (-S) and
then set the link to down. When we resume the machine the link appears
to be up.
Reproducer:
# qemu-system-x86_64 ... -device e1000e,netdev=netdev0,id=net0 -S
{"execute": "qmp_capabilities" }
{"execute": "set_link", "arguments": {"name": "net0", "up": false}}
{"execute": "cont" }
To fix the problem, merge the content of e1000e_vm_state_change()
into e1000e_core_post_load() as e1000 does.
Buglink: https://issues.redhat.com/browse/RHEL-21867
Fixes: 6f3fbe4ed0 ("net: Introduce e1000e device emulation")
Suggested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 4cadf10234)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For a long time, we provide two compression formats in the
download area, .bz2 and .xz. There's absolutely no reason
to provide two in parallel, .xz compresses better, and all
the links we use points to .xz. Downstream distributions
mostly use .xz too.
For the release maintenance providing two formats is definitely
extra burden too.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 9bc9e95119)
HP-UX 10.20 seems to make the lsi53c895a spinning on a memory location
under certain circumstances. As the SCSI controller and CPU are not
running at the same time this loop will never finish. After some
time, the check loop interrupts with a unexpected device disconnect.
This works, but is slow because the kernel resets the scsi controller.
Instead of signaling UDC, start a timer and exit the loop. Until the
timer fires, the CPU can process instructions which might changes the
memory location.
The limit of instructions is also reduced because scripts running on
the SCSI processor are usually very short. This keeps the time until
the loop is exit short.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-ID: <20240229204407.1699260-1-svens@stackframe.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 9876359990)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When the maximum count of SCRIPTS instructions is reached, the code
stops execution and returns, but fails to decrement the reentrancy
counter. This effectively renders the SCSI controller unusable
because on next entry the reentrancy counter is still above the limit.
This bug was seen on HP-UX 10.20 which seems to trigger SCRIPTS
loops.
Fixes: b987718bbb ("hw/scsi/lsi53c895a: Fix reentrancy issues in the LSI controller (CVE-2023-0330)")
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-ID: <20240128202214.2644768-1-svens@stackframe.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 8b09b7fe47)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Netbsd isn't happy with qemu lsi53c895a emulation:
cd0(esiop0:0:2:0): command with tag id 0 reset
esiop0: autoconfiguration error: phase mismatch without command
esiop0: autoconfiguration error: unhandled scsi interrupt, sist=0x80 sstat1=0x0 DSA=0x23a64b1 DSP=0x50
This is because lsi_bad_phase() triggers a phase mismatch, which
stops SCRIPT processing. However, after returning to
lsi_command_complete(), SCRIPT is restarted with lsi_resume_script().
Fix this by adding a return value to lsi_bad_phase(), and only resume
script processing when lsi_bad_phase() didn't trigger a host interrupt.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Helge Deller <deller@gmx.de>
Message-ID: <20240302214453.2071388-1-svens@stackframe.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit a9198b3132)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Original goal of addition of drain_call_rcu to qmp_device_add was to cover
the failure case of qdev_device_add. It seems call of drain_call_rcu was
misplaced in 7bed89958b what led to waiting for pending RCU callbacks
under happy path too. What led to overall performance degradation of
qmp_device_add.
In this patch call of drain_call_rcu moved under handling of failure of
qdev_device_add.
Signed-off-by: Dmitrii Gavrilov <ds-gavr@yandex-team.ru>
Message-ID: <20231103105602.90475-1-ds-gavr@yandex-team.ru>
Fixes: 7bed89958b ("device_core: use drain_call_rcu in in qmp_device_add", 2020-10-12)
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 012b170173)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The sun4v RTC device model added under commit a0e893039c in 2016
was unfortunately added with a license of GPL-v3-or-later, which is
not compatible with other QEMU code which has a GPL-v2-only license.
Relicense the code in the .c and the .h file to GPL-v2-or-later,
to make it compatible with the rest of QEMU.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini (for Red Hat) <pbonzini@redhat.com>
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240223161300.938542-1-peter.maydell@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit fd7f95f23d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For the outer product set of insns, which take an entire matrix
tile as output, the argument is not a combined tile+column.
Therefore using get_tile_rowcol was incorrect, as we extracted
the tile number from itself.
The test case relies only on assembler support for SME, since
no release of GCC recognizes -march=armv9-a+sme yet.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1620
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230622151201.1578522-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: dropped now-unneeded changes to sysregs CFLAGS]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 1f51573f79)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Some assemblers will complain about attempts to access
id_aa64zfr0_el1 and id_aa64smfr0_el1 by name if the test
binary isn't built for the right processor type:
/tmp/ccASXpLo.s:782: Error: selected processor does not support system register name 'id_aa64zfr0_el1'
/tmp/ccASXpLo.s:829: Error: selected processor does not support system register name 'id_aa64smfr0_el1'
However, these registers are in the ID space and are guaranteed to
read-as-zero on older CPUs, so the access is both safe and sensible.
Switch to using the S syntax, as we already do for ID_AA64ISAR2_EL1
and ID_AA64MMFR2_EL1. This allows us to drop the HAS_ARMV9_SME check
and the makefile machinery to adjust the CFLAGS for this test, so we
don't rely on having a sufficiently new compiler to be able to check
these registers.
This means we're actually testing the SME ID register: no released
GCC yet recognizes -march=armv9-a+sme, so that was always skipped.
It also avoids a future problem if we try to switch the "do we have
SME support in the toolchain" check from "in the compiler" to "in the
assembler" (at which point we would otherwise run into the above
errors).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 3dc2afeab2)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: pick this for v8.0.0-2361-g1f51573f79
"target/arm: Fix SME full tile indexing")
In CPUID registers exposed to userspace, some registers were missing
and some fields were not exposed. This patch aligns exposed ID
registers and their fields with what the upstream kernel currently
exposes.
Specifically, the following new ID registers/fields are exposed to
userspace:
ID_AA64PFR1_EL1.BT: bits 3-0
ID_AA64PFR1_EL1.MTE: bits 11-8
ID_AA64PFR1_EL1.SME: bits 27-24
ID_AA64ZFR0_EL1.SVEver: bits 3-0
ID_AA64ZFR0_EL1.AES: bits 7-4
ID_AA64ZFR0_EL1.BitPerm: bits 19-16
ID_AA64ZFR0_EL1.BF16: bits 23-20
ID_AA64ZFR0_EL1.SHA3: bits 35-32
ID_AA64ZFR0_EL1.SM4: bits 43-40
ID_AA64ZFR0_EL1.I8MM: bits 47-44
ID_AA64ZFR0_EL1.F32MM: bits 55-52
ID_AA64ZFR0_EL1.F64MM: bits 59-56
ID_AA64SMFR0_EL1.F32F32: bit 32
ID_AA64SMFR0_EL1.B16F32: bit 34
ID_AA64SMFR0_EL1.F16F32: bit 35
ID_AA64SMFR0_EL1.I8I32: bits 39-36
ID_AA64SMFR0_EL1.F64F64: bit 48
ID_AA64SMFR0_EL1.I16I64: bits 55-52
ID_AA64SMFR0_EL1.FA64: bit 63
ID_AA64MMFR0_EL1.ECV: bits 63-60
ID_AA64MMFR1_EL1.AFP: bits 47-44
ID_AA64MMFR2_EL1.AT: bits 35-32
ID_AA64ISAR0_EL1.RNDR: bits 63-60
ID_AA64ISAR1_EL1.FRINTTS: bits 35-32
ID_AA64ISAR1_EL1.BF16: bits 47-44
ID_AA64ISAR1_EL1.DGH: bits 51-48
ID_AA64ISAR1_EL1.I8MM: bits 55-52
ID_AA64ISAR2_EL1.WFxT: bits 3-0
ID_AA64ISAR2_EL1.RPRES: bits 7-4
ID_AA64ISAR2_EL1.GPA3: bits 11-8
ID_AA64ISAR2_EL1.APA3: bits 15-12
The code is also refactored to use symbolic names for ID register fields
for better readability and maintainability.
The test case in tests/tcg/aarch64/sysregs.c is also updated to match
the intended behavior.
Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com>
Message-id: DS7PR12MB6309FB585E10772928F14271ACE79@DS7PR12MB6309.namprd12.prod.outlook.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: use Sn_n_Cn_Cn_n syntax to work with older assemblers
that don't recognize id_aa64isar2_el1 and id_aa64mmfr2_el1]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit bc6bd20ee3)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: pick this for v8.0.0-2361-g1f51573f79
"target/arm: Fix SME full tile indexing")
macOS Sonoma changes the NSView.clipsToBounds to false by default
where it was true in earlier version of macOS. This causes the window
contents to be occluded by the frame at the top of the window. This
fixes the issue by conditionally compiling the clipping on Sonoma to
true. NSView only exposes the clipToBounds in macOS 14 and so has
to be fixed via conditional compilation.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1994
Signed-off-by: David Parsons <dave@daveparsons.net>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240224140620.39200-1-dave@daveparsons.net>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit f5af80271a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The 13.2 images have been deleted from gcloud
Cc: qemu-stable@nongnu.org
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240304144456.3825935-3-berrange@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 9ea920dc28)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: 7.2 used FreeBSD version 13.1, not 13.2)
The sgx_epc_get_section stub is reachable from cpu_x86_cpuid. It
should not assert, instead it should just return true just like
the "real" sgx_epc_get_section does when SGX is disabled.
Reported-by: Vladimír Beneš <vbenes@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20220201190941.106001-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 2196157404)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The blockjob/complete_in_standby test is flaky and fails
intermittently in CI:
172/621 qemu:unit / test-blockjob
ERROR 0.26s killed by signal 6 SIGABRT
11:03:46 MALLOC_PERTURB_=176
G_TEST_SRCDIR=/Users/pm215/src/qemu-for-merges/tests/unit
G_TEST_BUILDDIR=/Users/pm215/src/qemu-for-merges/build/all/tests/unit
/Users/pm215/src/qemu-for-merges/build/all/tests/unit/test-blockjob
--tap -k
----------------------------------- output -----------------------------------
stdout:
# random seed: R02S8c79d6e1c01ce0b25475b2210a253242
1..9
# Start of blockjob tests
ok 1 /blockjob/ids
stderr:
Assertion failed: (job->status == JOB_STATUS_STANDBY), function
test_complete_in_standby, file ../../tests/unit/test-blockjob.c, line
499.
Seen on macOS/x86_64, FreeBSD 13/x86_64, msys2-64bit, eg:
https://gitlab.com/qemu-project/qemu/-/jobs/3872508803https://gitlab.com/qemu-project/qemu/-/jobs/3950667240
Disable this subtest until somebody has time to investigate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230317143534.1481947-1-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit b6903cbe3a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
display-vga-test currently tries to guess the usable VGA devices
according to the target architecture that is used for the test.
This of course does not work if QEMU has been built with the
"--without-default-devices" configure switch. To fix this, use the
qtest_has_device() function for the decision instead. This way
we can also consolidate most of the test functions into one single
function (that takes a parameter with the device name now), except
for the multihead test that tries to instantiate two devices and
thus is a little bit different.
Message-Id: <20230130104446.1286773-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit f2e57851b8)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
According to g_tree_foreach() documentation:
"The tree may not be modified while iterating over it (you can't
add/remove items)."
compare_trees()/diff_tree() fail to respect this rule.
Historically GLib2 used a slice allocator for the GTree APIs
which did not immediately release the memory back to the system
allocator. As a result QEMU's use-after-free bug was not visible.
With GLib > 2.75.3 however, GLib2 has switched to using malloc
and now a SIGSEGV can be observed while running test-vmstate.
Get rid of the node removal within the tree traversal. Also
check the trees have the same number of nodes before the actual
diff.
Fixes: 9a85e4b8f6 ("migration: Support gtree migration")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1518
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
(cherry picked from commit abe2c4bdb6)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
test-util-sockets leaves the temporary socket files around in the
temporary files folder. Let's better remove them at the end of the
testing.
Fixes: 4d3a329af5 ("tests/util-sockets: add abstract unix socket cases")
Message-ID: <20240226082728.249753-1-thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit f0cb6828ae)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since Windows text files use CRLFs for all \n, the Windows version of QEMU
inserts a CR in the PCAP stream when a LF is encountered when using USB PCAP
files. This is due to the fact that the PCAP file is opened as TEXT instead
of BINARY.
To show an example, when using a very common protocol to USB disks, the BBB
protocol uses a 10-byte command packet. For example, the READ_CAPACITY(10)
command will have a command block length of 10 (0xA). When this 10-byte
command (part of the 31-byte CBW) is placed into the PCAP file, the Windows
file manager inserts a 0xD before the 0xA, turning the 31-byte CBW into a
32-byte CBW.
Actual CBW:
0040 55 53 42 43 01 00 00 00 08 00 00 00 80 00 0a 25 USBC...........%
0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...............
PCAP CBW
0040 55 53 42 43 01 00 00 00 08 00 00 00 80 00 0d 0a USBC............
0050 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 %..............
I believe simply opening the PCAP file as BINARY instead of TEXT will fix
this issue.
Resolves: https://bugs.launchpad.net/qemu/+bug/2054889
Signed-off-by: Benjamin David Lunt <benlunt@fysnet.net>
Message-ID: <000101da6823$ce1bbf80$6a533e80$@fysnet.net>
[thuth: Break long line to avoid checkpatch.pl error]
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 5e02a4fdeb)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Python is transitioning to a world where you're not allowed to use 'pip
install' outside of a virutal env by default. The rationale is to stop
use of pip clashing with distro provided python packages, which creates
a major headache on distro upgrades.
All our CI environments, however, are 100% disposable so the upgrade
headaches don't exist. Thus we can undo the python defaults to allow
pip to work.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240222114038.2348718-1-berrange@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit a8bf9de2f4)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The main problem is that "check-venv" is a .PHONY target will always
evaluate and trigger a full re-build of the VM images. While its
tempting to drop it from the dependencies that does introduce a
breakage on freshly configured builds.
Fortunately we do have the otherwise redundant --force flag for the
script which up until now was always on. If we make the usage of
--force conditional on dependencies other than check-venv triggering
the update we can avoid the costly rebuild and still run cleanly on a
fresh checkout.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2118
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-4-alex.bennee@linaro.org>
(cherry picked from commit 151b7dba39)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The old links are dead so even if we have the ISO cached we can't
finish the install. Update to the current stable and tweak the install
strings.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2192
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-5-alex.bennee@linaro.org>
(cherry picked from commit 8467ac75b3)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The A20 mask is only applied to the final memory access. Nested
page tables are always walked with the raw guest-physical address.
Unlike the previous patch, in this one the masking must be kept, but
it was done too early.
Cc: qemu-stable@nongnu.org
Fixes: 4a1e9d4d11 ("target/i386: Use atomic operations for pte updates", 2022-10-18)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit b5a9de3259)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If ptw_translate() does a MMU_PHYS_IDX access, the A20 mask is already
applied in get_physical_address(), which is called via probe_access_full()
and x86_cpu_tlb_fill().
If ptw_translate() on the other hand does a MMU_NESTED_IDX access,
the A20 mask must not be applied to the address that is looked up in
the nested page tables; it must be applied only to the addresses that
hold the NPT entries (which is achieved via MMU_PHYS_IDX, per the
previous paragraph).
Therefore, we can remove A20 masking from the computation of the page
table entry's address, and let get_physical_address() or mmu_translate()
apply it when they know they are returning a host-physical address.
Cc: qemu-stable@nongnu.org
Fixes: 4a1e9d4d11 ("target/i386: Use atomic operations for pte updates", 2022-10-18)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit a28fe7dc19)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The address translation logic in get_physical_address() will currently
truncate physical addresses to 32 bits unless long mode is enabled.
This is incorrect when using physical address extensions (PAE) outside
of long mode, with the result that a 32-bit operating system using PAE
to access memory above 4G will experience undefined behaviour.
The truncation code was originally introduced in commit 33dfdb5 ("x86:
only allow real mode to access 32bit without LMA"), where it applied
only to translations performed while paging is disabled (and so cannot
affect guests using PAE).
Commit 9828198 ("target/i386: Add MMU_PHYS_IDX and MMU_NESTED_IDX")
rearranged the code such that the truncation also applied to the use
of MMU_PHYS_IDX and MMU_NESTED_IDX. Commit 4a1e9d4 ("target/i386: Use
atomic operations for pte updates") brought this truncation into scope
for page table entry accesses, and is the first commit for which a
Windows 10 32-bit guest will reliably fail to boot if memory above 4G
is present.
The truncation code however is not completely redundant. Even though the
maximum address size for any executed instruction is 32 bits, helpers for
operations such as BOUND, FSAVE or XSAVE may ask get_physical_address()
to translate an address outside of the 32-bit range, if invoked with an
argument that is close to the 4G boundary. Likewise for processor
accesses, for example TSS or IDT accesses, when EFER.LMA==0.
So, move the address truncation in get_physical_address() so that it
applies to 32-bit MMU indexes, but not to MMU_PHYS_IDX and MMU_NESTED_IDX.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2040
Fixes: 4a1e9d4d11 ("target/i386: Use atomic operations for pte updates", 2022-10-18)
Cc: qemu-stable@nongnu.org
Co-developed-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit b1661801c1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: drop unrelated change in target/i386/cpu.c)
MSR_VM_HSAVE_PA bits 0-11 are reserved, as are the bits above the
maximum physical address width of the processor. Setting them to
1 causes a #GP (see "15.30.4 VM_HSAVE_PA MSR" in the AMD manual).
The same is true of VMCB addresses passed to VMRUN/VMLOAD/VMSAVE,
even though the manual is not clear on that.
Cc: qemu-stable@nongnu.org
Fixes: 4a1e9d4d11 ("target/i386: Use atomic operations for pte updates", 2022-10-18)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d09c79010f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
CR3 bits 63:32 are ignored in 32-bit mode (either legacy 2-level
paging or PAE paging). Do this in mmu_translate() to remove
the last where get_physical_address() meaningfully drops the high
bits of the address.
Cc: qemu-stable@nongnu.org
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Fixes: 4a1e9d4d11 ("target/i386: Use atomic operations for pte updates", 2022-10-18)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 68fb78d7d5)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The PL031 allows you to read RTCLR, which is meant to give you the last
value written. PL031State has an lr field which is used when reading
from RTCLR, and is present in the VM migration state, but we never
actually update it, so it always reads as its initial 0 value.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240222000341.1562443-1-jrtc27@jrtc27.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 4d28d57c9f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
numcntl is one byte and so is max_vfs. Using cpu_to_le16 on big endian
hosts results in numcntl being set to 0.
Fix by dropping the endian conversion.
Fixes: 99f48ae7ae ("hw/nvme: Add support for Secondary Controller List")
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Message-ID: <20240222-fix-sriov-numcntl-v1-1-d60bea5e72d0@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit d2b5bb860e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The move to decodetree flipped the inequality test for the VEC / VSX
MSR facility check.
This caused application crashes under Linux, where these facility
unavailable interrupts are used for lazy-switching of VEC/VSX register
sets. Getting the incorrect interrupt would result in wrong registers
being loaded, potentially overwriting live values and/or exposing
stale ones.
Cc: qemu-stable@nongnu.org
Reported-by: Joel Stanley <joel@jms.id.au>
Fixes: 70426b5bb7 ("target/ppc: moved stxvx and lxvx from legacy to decodtree")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1769
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Tested-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
(cherry picked from commit 2cc0e449d1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
MSYS2 is dropping support for 32-bit Windows. This shows up for us
as various packages we were using in our CI job no longer being
available to install, which causes the job to fail. In commit
8e31b744fd we dropped the dependency on libusb and spice, but the
dtc package has also now been removed.
For us as QEMU upstream, "32 bit x86 hosts for system emulation" have
already been deprecated as of QEMU 8.0, so we are ready to drop them
anyway.
Drop the msys2-32bit CI job, as the first step in doing this.
This is cc'd to stable, because this job will also be broken for CI
on the stable branches. We can't drop 32-bit support entirely there,
but we will still be covering at least compilation for 32-bit Windows
via the cross-win32-system job.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240220165602.135695-1-peter.maydell@linaro.org
(cherry picked from commit 5cd3ae4903)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: in 7.2 the piece being removed is different but the job has to go anyway)
Input grab key should be Ctrl-Alt-g, not just Ctrl-Alt.
Fixes: f8d2c9369b ("sdl: use ctrl-alt-g as grab hotkey")
Signed-off-by: Tianlan Zhou <bobby825@126.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 185311130f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Input grab key should be Ctrl-Alt-g, not just Ctrl-Alt.
Fixes: f8d2c9369b ("sdl: use ctrl-alt-g as grab hotkey")
Signed-off-by: Tianlan Zhou <bobby825@126.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 4a20ac400f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It's simply by luck that dbus-display header is built first before the
other units using it.
With sourceset, I can't find an easier way out than declaring an extra
dependency for dbus-display1 generate code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit 1222070e77)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
