When building with -DNDEBUG, assert(0) will not stop execution
so it must not be used for abnormal termination.
Use cpu_abort() when in CPU context, abort() otherwise.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Don't return addresses that aren't properly aligned for the guest,
e.g. when the guest has a larger page size than the host. Don't
return addresses that are outside the virtual address space for the
target, by paying proper attention to the h2g/g2h macros.
At the same time, place the default mapping base for 64-bit guests
(on 64-bit hosts) outside the low 4G. Consistently interpret
mmap_next_start in the guest address space.
Signed-off-by: Richard Henderson <rth@twiddle.net>
As "todo" comment in source code.
And modify restore_sigcontext() to have three args as kernel's does.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On linux/sh4
pipe() return values by r0:r1 as SH C calling convention.
pipe2() return values on memory as traditional unix way.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move userland PALcode handling into linux-user main loop so that
we can send signals from there. This also makes alpha_palcode.c
system-level only, so don't build it for userland. Add defines
for GENTRAP PALcall mapping to signals.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The existing set of IPRs is totally irrelevant to user-mode emulation.
Indeed, they most are irrelevant to implementing kernel-mode emulation,
and would only be relevant to PAL-mode emulation, which I suspect that
no one will ever attempt.
Reducing the set of processor registers reduces the size of the CPU state.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This is a reimplementation of prior versions which adds
the ability to define cpu models for contemporary processors.
The added models are likewise selected via -cpu <name>,
and are intended to displace the existing convention
of "-cpu qemu64" augmented with a series of feature flags.
A primary motivation was determination of a least common
denominator within a given processor class to simplify guest
migration. It is still possible to modify an arbitrary model
via additional feature flags however the goal here was to
make doing so unnecessary in typical usage. The other
consideration was providing models names reflective of
current processors. Both AMD and Intel have reviewed the
models in terms of balancing generality of migration vs.
excessive feature downgrade relative to released silicon.
This version of the patch replaces the prior hard wired
definitions with a configuration file approach for new
models. Existing models are thus far left as-is but may
easily be transitioned to (or may be overridden by) the
configuration file representation.
Proposed new model definitions are provided here for current
AMD and Intel processors. Each model consists of a name
used to select it on the command line (-cpu <name>), and a
model_id which corresponds to a least common denominator
commercial instance of the processor class.
A table of names/model_ids may be queried via "-cpu ?model":
:
x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron)
x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron)
x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron)
x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7)
x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2)
x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2)
:
Also added is "-cpu ?dump" which exhaustively outputs all config
data for all defined models, and "-cpu ?cpuid" which enumerates
all qemu recognized CPUID feature flags.
The pseudo cpuid flag 'check' when added to the feature flag list
will warn when feature flags (either implicit in a cpu model or
explicit on the command line) would have otherwise been quietly
unavailable to a guest:
# qemu-system-x86_64 ... -cpu Nehalem,check
warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000]
warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000]
A similar 'enforce' pseudo flag exists which in addition
to the above causes qemu to error exit if requested flags are
unavailable.
Configuration data for a cpu model resides in the target config
file which by default will be installed as:
/usr/local/etc/qemu/target-<arch>.conf
The format of this file should be self explanatory given the
definitions for the above six models and essentially mimics
the structure of the static x86_def_t x86_defs.
Encoding of cpuid flags names now allows aliases for both the
configuration file and the command line which reconciles some
Intel/AMD/Linux/Qemu naming differences.
This patch was tested relative to qemu.git.
Signed-off-by: john cooper <john.cooper@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch for linux-user adapts the output of the emulated uname()
syscall to match the configured CPU. Tested with x86, x86-64 and arm
emulation.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Loïc Minier <lool@dooz.org>
CC i386-linux-user/mmap.o
cc1: warnings being treated as errors
/usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c: In function 'mmap_frag':
/usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c:253: error: ignoring return value of 'pread', declared with attribute warn_unused_result
/usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c: In function 'target_mmap':
/usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c:477: error: ignoring return value of 'pread', declared with attribute warn_unused_result
make[1]: *** [mmap.o] Error 1
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The stat64/fstat64 syscalls are broken for alpha linux-user.
This is because Alpha, even though it is native 64-bits, has a stat64
syscall that is different than regular stat. This means that the
"TARGET_LONG_BITS==64" check in syscall.c isn't enough. Below is
a patch that fixes things for me, although it might not be the cleanest
fix.
This issue keeps sixtrack and fma3d spec2k benchmarks from running.
Signed-off-by: Vince Weaver <vince@csl.cornell.edu>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For what I know DCR is always 32 bits wide, so we should also use uint32_t to
pass it along the stacks.
This fixes a warning when compiling qemu-system-ppc64 with KVM enabled, making
it compile without --disable-werror
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix the alternate time base the same way as the default timebase. SPR_ATBL
should return a 64-bit value on 64 bit implementations.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On PPC we have a 64-bit time base. Usually (PPC32) this is accessed using
two separate 32 bit SPR accesses to SPR_TBU and SPR_TBL.
On PPC64 the SPR_TBL register acts as 64 bit though, so we get the full
64 bits as return value. If we only take the lower ones, fine. But Linux
wants to see all 64 bits or it breaks.
This patch makes PPC64 Linux work even after TB crossed the 32-bit boundary,
which usually happened a few seconds after bootup.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Alpha always used 32-bit uids, but never renamed the syscalls
to match i386 when 32-bit uids were added there. This enables
the proper bits in syscall.c.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There's no sense in separately declaring target_{elf_greg,uid,gid,pid}_t
for every architecture. Just declare them once with appropriate
USE_UID16 handling.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Force_sig should be always called with TARGET_ signals.
Not that it really matters with SEGV, so this patch is
just for cleanup and improving consistency.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
mmap_lock() can be called while tb_lock() is being held. To
avoid deadlock when one thread is holding mmap_lock and another
tb_lock, _always_ lock first tb_lock().
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
1. Add correct definitions of error numbers.
2. Implement SYS_osf_sigprocmask
3. Implement SYS_osf_get/setsysinfo for IEEE_FP_CONTROL.
This last requires exposing the FPCR value to do_syscall.
Since this value is actually split up into the float_status,
expose routines from helper.c to access it.
Finally, also add a float_exception_mask field to float_status.
We don't actually use it to control delivery of exceptions to
the emulator yet, but simply hold the value that we placed there
when loading/storing the FPCR.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In a bunch of places, 64 is used as value of _NSIG but it's wrong
at least on MIPS were _NSIG is 128.
Based on a patch from Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The variable CP0_LLAddr represent the full lladdr, not the actual
register value, which is only part of this value and depends on the
CPU.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
b55a37c981 moved the call to cpu_reset
to user emulators. But cpu_copy also initializes a CPU structure, so add the
call also there.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
everything needed to run SDL on a framebuffer device in the userspace emulator
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
prepare_binprm() zeroes bprm->buf. That buffer is already zeroed in
main() and hasn't been touched since so that is not necessary.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Swap __pad1 and st_blocks fields location to maintain proper alignment.
This fixes incorrect 'du' and 'stat' report on ppc guest.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
updated fallocate check to new configure, added dup3 check as suggested
by Jan-Simon Möller.
Riku: updated to apply to current git.
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Make an "#if 0"'d printf() in load_elf_binary(), probably left to aid in
debugging, reflect what the actual code does. The current printf() will
only confuse those who "#if 1" it (it certainly confused me enough to
write this trivial patch).
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Looks like linux-user code was correct, just unreadable: what it wanted
to do with "-=" was really assign a negative number, not decrement. Fix
up accordingly.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Put space between = and & when taking a pointer,
to avoid confusion with old-style "&=".
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Modern compilers do not parse "=-" as decrement:
you must use "-=" for that.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Put space between = and * when dereferencing a pointer,
to avoid confusion with old-style "*="
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Callers must pass ELF machine, byte swapping and symbol LSB clearing
information to ELF loader. A.out loader needs page size information, pass
that too as a parameter.
Extract prototypes to a separate file. Move loader.[ch] and elf_ops.h under hw.
Adjust callers. Also use target_phys_addr_t instead of target_ulong for
addresses: loader addresses aren't virtual.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
While i386, x86_64 and Sparc64/OpenBSD still worked after
df70204db5, Sparc32 and Sparc64 Linux hosts
broke.
Partially revert the commit: make the restored code conditional to
!CONFIG_USER_PIE.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
There is a link hack in linux-user which produces an executable that
looks like PIE, but always has text relocations since all object files
isn't position-independent (compiled without -fpic/-fpie). Dynamic loader
has to do more work to load a binary with text relocations.
The best way to keep this functionality is to build a true PIE without
text relocations.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Problem: Our file sys-queue.h is a copy of the BSD file, but there are
some additions and it's not entirely compatible. Because of that, there have
been conflicts with system headers on BSD systems. Some hacks have been
introduced in the commits 15cc923584,
f40d753718,
96555a96d7 and
3990d09adf but the fixes were fragile.
Solution: Avoid the conflict entirely by renaming the functions and the
file. Revert the previous hacks.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qemu's page table can be incomple if /proc/self/maps is unavailable or
host allocating a memory with mmap(), so we can't use it to find free
memory area.
New version mmap_find_vma() uses mmap() without MAP_FIXED to find free
memory.
Tested-by: Martin Mohring <martin.mohring@opensuse.org> :
quite some time ago this patch had been sent by Kirill to the QEMU ml.
At that time, the patch was rejected. Now we found out why the current
user mode memory allocator sometimes fails:
- Kernel Bug linux/fs/proc/task_mmu.c (fixed after 2.6.27)
http://bugzilla.kernel.org/attachment.cgi?id=17219
- use of proc file system to find memory mappings => bad idea
So I please apply the attached patch from Kirill to qemu to fix this
longstanding bug, because it causes all older linux distros (using
kernel 2.6.26 or older) to fail the QEMU memory allocator in user mode.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
The fstat implementation does not initialize the nanosecond fields in the
stat buffer; this caused funny values to turn up there, preventing, for
instance, cp -p from preserving timestamps because utimensat rejected
the out-of-bounds nanosecond values. Resetting the entire structure
to zero fixes that.
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
works perfectly fine with the example from getdents(2) and passes the LTP
tests (tested with s390x on x86_64 emulation)
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Fixes swaps on l_pid which were pretty much of random size. Implements
F_SETLEASE, F_GETLEASE. Now passes all LTP fcntl tests.
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
mqueue.h is only available if __NR_mq_open is defined. So don't include
it unconditionally. Similarly, the mq_* family of syscalls depend on
__NR_mq_open. Finally, the copy_{from,to}_user_mq_attr functions should
not be defined unconditionally, but only if we're going to use the mq_*
syscalls.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
As setup_frame() and setup_rt_frame() are now implemented we can now
enable sigaltstack().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
This patch adds signals management for linux-user.
It implements setup_frame() which allows to call the user signal
handler.
setup_rt_frame() is always unimplemented.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Straightforward implementation. This syscall is rare enough that we
don't need to support the odder cases, just disable it if host glibc
is too old.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
this patch fixes an issue in symfind.
Assume you have the following symbols:
Address Size
0045bca0 00000080 T s0
0045bd20 00000112 T s1
You'll notice that s1 is s0 + size.
So the current symfind will find that address 0045bd20 belongs to s0
instead of s1.
Laurent
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
tl and tsptr of members sparc64 cpu state must be changed
simultaneously to keep trap state window in sync with current
trap level. Currently translation of store to tl does not change
tsptr, which leads to corrupt trap state on corresponding
trap level.
This patch removes tsptr from sparc64 cpu state and replaces
all uses with call to helper routine.
Changes v0->v1:
- reimplemented helper routine with tcg generator
- on cpu reset trap type and pstate are populated with power-on reset
values, including tl=maxtl
Signed-off-by: igor.v.kovalenko@gmail.com
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We handle conditional stores as an exception so we can ensure that no
other thread is changing memory out from underneath us.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
Use was not consistent, in Makefile was TARGET_GPROF and in *h HAVE_GPROF
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I used the following command to enable debugging:
perl -p -i -e 's/^\/\/#define DEBUG/#define DEBUG/g' * */* */*/*
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
All elf64_note structure members are Elf64_Word (which is 32bit value)
hence using bswaptls to byteswap it on 64bit platforms is incorrect.
Signed-off-by: malc <av1474@comtv.ru>
Re-implement GUEST_BASE support.
Offset guest ddress space by default if the guest binary contains
regions below the host mmap_min_addr.
Implement support for i386, x86-64 and arm hosts.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Paul Brook <paul@codesourcery.com>
Fixes getrlimit implementation that overwrote the result of the syscall
instead of converting it
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
makes socketcall 64-bit clean so it works on 64-bit big-endian systems
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
pipedes is an address, it should not be signed (breaks for addresses
> 0x80000000)
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Removes the following warning
CC i386-linux-user/syscall.o
cc1: warnings being treated as errors
/media/nfs/qemu/linux-user/syscall.c: In function ‘do_syscall’:
/media/nfs/qemu/linux-user/syscall.c:2219: warning: ‘array’ may be used uninitialized in this function
Signed-off-by: Vibi Sreenivasan <vibi_sreenivasan@cms.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
This patch is fixing following issues :
- commit 8fea36025b was applied to
do_getsockname instead of do_accept.
- Some syscalls were not checking properly the memory addresses passed
as argument
- Add check before syscalls made for cases like do_getpeername() where
we're using the address parameter after doing the syscall
- Fix do_accept to return EINVAL instead of EFAULT when parameters
invalid to match with linux behaviour
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
There's a error When doing something like that :
find / -type f -print0 | xargs -0 echo
[ done in a arm chroot with qemu-arm and linux binfmt stuff or with
find / -type f -print0 | qemu-arm -L <path> <path>/usr/bin/xargs -0
echo ]
Doing this outsite qemu is fine. The problem was the huge number of
parameters. Increasing MAX_ARG_PAGES is fixing that.
While I was at it, I've modified linux-user/main.c to report error code
of loader_exec. It helps to debug/know what's wrong.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Fix missing strnlen (a GNU extension) problems by using qemu_strnlen
used for user emulators also for system emulators.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Microblaze recently changed their ABI. The new is not backwards compatible
and there doesn't seem to be a way to distinguish old/new binaries.
Let's support the latest ABI for now and hope someone figures out a way to
hande both ABI's later.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
On Tue, Jun 16, 2009 at 08:19:23PM -0500, Anthony Liguori wrote:
> malc wrote:
>>
>> On my system the above line causes gcc to emit:
>>
>> In file included from /home/malc/x/rcs/git/qemu/linux-user/strace.c:12:
>> /usr/include/linux/futex.h:48: error: field `__user' has incomplete type
>> /usr/include/linux/futex.h:48: error: syntax error before '*' token
>> /usr/include/linux/futex.h:63: error: field `list' has incomplete type
>> /usr/include/linux/futex.h:83: error: field `__user' has incomplete type
>> /usr/include/linux/futex.h:83: error: syntax error before '*' token
>> make[1]: *** [strace.o] Error 1
> We had the same problem with usb-linux.c. It's broken system headers,
> the __user stuff is supposed to get removed as part of the headers
> installation.
> It builds fine on my system (Fedora 10).
Howabout something like this:
commit eb8387cb0eda32a18880664eb5f0ca5c8bf05b45
Author: Riku Voipio <riku.voipio@iki.fi>
Date: Thu Jun 18 22:44:31 2009 +0300
Subject: linux-user: include futex defines directly
Since some common distributions have broken linux/futex.h, stop
including it. Instead add the defines directly.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
This issue has been detected with tests/linux-tests.c:
linux-test.c:330: getsockopt
327 len = sizeof(val);
328 chk_error(getsockopt(server_fd, SOL_SOCKET, SO_TYPE, &val, &len));
329 if (val != SOCK_STREAM)
330 error("getsockopt");
In linux-user/syscall.c:do_getsockopt(), we have:
...
val = tswap32(val);
...
if (put_user_u32(val, optval_addr))
...
whereas "put_user_u32" calls in the end "__put_user" which uses "tswap32".
So the "val = tswap32(val);" is useless and wrong.
This patch removes it.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Needed to make sure the xxxat() functions are available.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
We initialize mmap_mutex in any child threads/processes, but we need to
correctly statically initialize it for the original process.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Hi,
This is a new try to fix the fcntl support in linux-user. I tried to
adress all comments but as the previous version is several weeks old,
it's possible that I've missed some.
This patch doesn't handle linux specific fcntl flags. My plan is to get
this version of the patch reviewed/fixed and then, add them if wanted.
Thanks,
Arnaud
Signed-off-by: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Add support for tee, splice and vmsplice.
Originally from: vibi sreenivasan <vibi_sreenivasan@cms.com>
Riku: squashed patches together, added a test to configure
and removed compliler warning by picking up correct type for
splice param
Signed-off-by: vibisreenivasan <vibi_sreenivasan@cms.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
implement pipe2 syscall.
[v2] fix do_pipe on mips and sh4
[v3] use pipe2 to ensure atomicity, but only when it is available.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
defines FIGETBSZ FIBMAP, allowing the respective ioctl's to
be implemented.
From: Martin Mohring <martin.mohring@opensuse.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
In current code, we're sending ENOSYS to target when a syscall for the
xattrs is done. This makes applications like ls complain loudly about
that and breaks scripts parsing the output. Moreover, iirc, implemented
features of filesystems are are sending EOPNOTSUPP (I've not checked so
I may be a little bit wrong on that...).
So, I'm proposing to return -EOPNOTSUPP and make ls happy
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
When converting the termios structure between host and target in
target_to_host_termios and host_to_target_termios, the c_cc[] array is
never initialised.
Calling memset() before using it allows to run successfully "stty echo /
stty -echo" on arm-linux-user target (host being x86 and mips).
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
The glibc function for utimensat glibc returns -EINVAL when the path is null
which is a different behaviour with the syscall.
path can be null because internally the glibc is using utimensat with
path null when implmenting futimens. If path is null, call futimes
instead.
don't try to copy timespec from user if is NULL.
Add configure check for older systems
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
- to not to break strace with GUEST_BASE is set:
- Strace now can load and print guest strings correctly.
- Added printing support for commonly used flags in some syscalls
(e.g open, creat, mmap etc.)
v2:
- fix strace.c build on etch
- add futex print to strace
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
When target process is killed with signal (such signal that
should dump core) a coredump file is created. This file is
similar than coredump generated by Linux (there are few exceptions
though).
Riku Voipio: added support for rlimit
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
No regressions were observed on either 64bit or 32bit
IA hosts.
Patch based on original patches by:
Kirill A. Shutemov <kirill@shutemov.name>
- Implement shm* syscalls
- Fix and cleanup IPCOP_shm* ipc calls handling
Depends on "export mmap_find_vma for shmat" patch.
Various whitespace uglifications applied to minimize
patch size.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
When debugging multi-threaded programs, QEMU's gdb stub would report the
correct number of threads (the qfThreadInfo and qsThreadInfo packets).
However, the stub was unable to actually switch between threads (the T
packet), since it would report every thread except the first as being
dead. Furthermore, the stub relied upon cpu_index as a reliable means
of assigning IDs to the threads. This was a bad idea; if you have this
sequence of events:
initial thread created
new thread #1
new thread #2
thread #1 exits
new thread #3
thread #3 will have the same cpu_index as thread #1, which would confuse
GDB. (This problem is partly due to the remote protocol not having a
good way to send thread creation/destruction events.)
We fix this by using the host thread ID for the identifier passed to GDB
when debugging a multi-threaded userspace program. The thread ID might
wrap, but the same sort of problems with wrapping thread IDs would come
up with debugging programs natively, so this doesn't represent a
problem.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Implement setup_{,rt_}frame and do_{,rt_}sigreturn for PPC 32-bit. Use
the same TARGET_QEMU_ESIGRETURN hack as for MIPS to avoid clobbering
register state on a sigreturn.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
Also fixes a register corruption bug in do_sigreturn. When "returning"
from sigreturn we are actually restoring the virtual cpu state from the
signal frame. This is actually surprisingly hard to observe in practice.
Typically an thread be blocked in a FUTEX_WAIT call when the signal arrives,
so the effect is a spurious syscall success and the introduction of a
subtle race condition.
On x86/arm a syscall modifies a single word sized register, so
do_sigreturn can just return that value. On MIPS a syscall clobbers
multiple registers, so we need additional smarts. My solution is to
invent a magic errno value that means "don't touch CPU state".
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7194 c046a42c-6fe2-441c-8c8c-71466251a162
In Linux kernel, fchmodat() and faccessat() take tree args.
4th value <int flags> is only processed by libc.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7187 c046a42c-6fe2-441c-8c8c-71466251a162
Fix and cleanup IPCOP_sem* ipc calls handling and
implement sem* syscalls.
Riku:
1) Uglify whitespace so that diff gets smaller and easier
to review
2) use __get_user in target_to_host_sembuf
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7184 c046a42c-6fe2-441c-8c8c-71466251a162
Configure test was broken, so the breakage of the #ifdef'd
code was not noticed.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7134 c046a42c-6fe2-441c-8c8c-71466251a162
The patch called "prefer glibc over direct syscalls" (commit 7118) has
replaced the getcwd syscall with a call to the glibc. With this change,
the syscall is returning -1 in error case and 0 otherwise.
This is problematic as the sys_getcwd syscall should return the number
of bytes written to the buffer including the '\0'.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-By: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7130 c046a42c-6fe2-441c-8c8c-71466251a162
The proper exit code for dieing from an uncaught signal is -<signal>.
The kernel doesn't allow exit() or _exit() to pass a negative value.
To get the proper exit code we need to actually die from an uncaught signal.
A default signal handler is installed, we send ourself a signal
and we wait for it to arrive.
Patch originates from Scratchbox
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7119 c046a42c-6fe2-441c-8c8c-71466251a162
The openat/*at syscalls are incredibly common with modern coreutils,
calling them directly via syscalls breaks for example fakeroot. Use
glibc stubs whenever directly available and provide old syscall
calling for people still using older libc.
Patch originally from Mika Westerberg, Adapted to
apply to current trunk and cleaned up by Riku Voipio.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7118 c046a42c-6fe2-441c-8c8c-71466251a162
- This check is not needed because kernel will check whether given
buffer is too small and there is no upper limit for size of the buffer.
From: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7117 c046a42c-6fe2-441c-8c8c-71466251a162
dbus sends too short (according to man 7 unix) addrlen for it's
unix socket. I've been told that happens with other applications
as well. Linux kernel doesn't appear to mind, so I guess
we whould be tolerant as well. Expand sockaddr with +1 to fit
the \0 of the pathname passed.
(scratchbox1 qemu had a very different workaround for the same issue).
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7116 c046a42c-6fe2-441c-8c8c-71466251a162
Added switch -0 (zero) which can be used to pass argv[0] to
target process. The main use is for a binfmt_misc wrapper when
the "P - preserve-argv[0]" setting is used.
From: Mika Westerberg
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7115 c046a42c-6fe2-441c-8c8c-71466251a162
There are two different syscall names for the same goal.
On systems with sizeof(long) == 64 it calls newfstatat.
On systems with sizeof(long) == 32 it calls fstatat64.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7050 c046a42c-6fe2-441c-8c8c-71466251a162
The sys_inotify* calls are defined if the target supports them and the
host supports the necessary syscalls. But the syscalls are handled if
the target supports them. This situation leads to compilation failures
when the host doesn't support the necessary syscalls, as the linker will
complain about undefined functions.
Fix this state of affairs by making the handling conditions the same as
the call definition conditions.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Acked-By: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7038 c046a42c-6fe2-441c-8c8c-71466251a162
Allows distributors to identify their builds without needing to hack the
sources.
Signed-off-by: Paul Brook <paul@codesourcery.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7036 c046a42c-6fe2-441c-8c8c-71466251a162
This replaces a compile time option for some targets and adds
this feature to targets which did not have a compile time option.
Add monitor command to enable or disable single step mode.
Modify monitor command "info status" to display single step mode.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7004 c046a42c-6fe2-441c-8c8c-71466251a162
and process termination in legacy applications. Try to guess which we want
based on the presence of multiple threads.
Also implement locking when modifying the CPU list.
Signed-off-by: Paul Brook <paul@codesourcery.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6735 c046a42c-6fe2-441c-8c8c-71466251a162
Fixes qemu-arm|grep cpu - with _exit() getting output from qemu --help
is a bit random. Since no atexit() handlers are registered for user mode
emulation, just use exit() instead.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6657 c046a42c-6fe2-441c-8c8c-71466251a162
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6510 c046a42c-6fe2-441c-8c8c-71466251a162
This patch fixes:
linux-user/signal.c:1403: warning: no previous prototype for 'do_sigreturn_v1'
linux-user/signal.c:1473: warning: no previous prototype for 'do_sigreturn_v2'
linux-user/signal.c:1511: warning: no previous prototype for 'do_rt_sigreturn_v1'
linux-user/signal.c:1552: warning: no previous prototype for 'do_rt_sigreturn_v2'
by making the appropriate functions static.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6486 c046a42c-6fe2-441c-8c8c-71466251a162
Some applications like to test /proc/self/exe to find
out who they are. Fake the result of readlink() for
them. Use realpath() to return full path to binary
(which the links /proc/self/exe are)
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6485 c046a42c-6fe2-441c-8c8c-71466251a162
Adds support for qemu to modify target process environment
variables using -E and -U commandline switches. This replaces
eventually the -drop-ld-preload flag.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6484 c046a42c-6fe2-441c-8c8c-71466251a162
Returning efault in these cases is not correct. Originally
proposed by Thayne Harbaugh in 2007:
http://www.mail-archive.com/qemu-devel@nongnu.org/msg14658.html
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6481 c046a42c-6fe2-441c-8c8c-71466251a162
From Thayne Harbaugh.
path() may be called with null string, don't bother trying to
remap in that case.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6480 c046a42c-6fe2-441c-8c8c-71466251a162
Based on scratchbox2 patch by Mika Westerberg
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6478 c046a42c-6fe2-441c-8c8c-71466251a162
This is a large patch that changes all occurrences of logfile/loglevel
global variables to use the new qemu_log*() macros.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6338 c046a42c-6fe2-441c-8c8c-71466251a162
Use macros to avoid #ifdefs on debugging code.
This patch doesn't try to merge logging macros from different files,
but just unify the debugging code #ifdefs onto a macro on each file. A
further cleanup can unify the debugging macros on a common header, later
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6332 c046a42c-6fe2-441c-8c8c-71466251a162
Introduce noreturn attribute and attach it to cpu_loop_exit as well as
interrupt/exception helpers for i386. This avoids a bunch of gcc4
warnings.
[ Note that this patch comes with a workaround to include qemu-common.h
even in cases where is currently causes conflicts with dyngen-exec.h.
I've been told that these conflicts will get resolved in the future
(/me will try to have a look as well - as time permits). ]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6303 c046a42c-6fe2-441c-8c8c-71466251a162
According to $GCC/gcc/config/rs6000/rs6000-c.c _ARCH_PPC is the
ubiquitous define which should be used to test whether gcc targets
PowerPC, on 64bit platforms _ARCH_PPC64 will be also defined.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6301 c046a42c-6fe2-441c-8c8c-71466251a162
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6223 c046a42c-6fe2-441c-8c8c-71466251a162
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6222 c046a42c-6fe2-441c-8c8c-71466251a162
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6210 c046a42c-6fe2-441c-8c8c-71466251a162
The attached patch updates the FSF address in the GPL/LGPL boilerplate
in most GPL/LGPLed files, and also in COPYING.LIB.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6162 c046a42c-6fe2-441c-8c8c-71466251a162
When a SIGSEGV signal is raised in user mode emulation the current
test to know whether the signal is sent by the kernel is wrong :
info->si_code == SI_KERNEL
according to /usr/include/bits/siginfo.h it should be
info->si_code > 0
Signed-off-by: Lionel Landwerlin <lionel.landwerlin@openwide.fr>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6151 c046a42c-6fe2-441c-8c8c-71466251a162
Change from v1:
Avoid changing the existing coding style in certain files.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6120 c046a42c-6fe2-441c-8c8c-71466251a162
Handle signals in the user-mode GDB stub. Report them to GDB, and
allow it to change or cancel them. Also correct the protocol numbering;
it happens to match Linux numbering for SIGINT and SIGTRAP, but that's
just good fortune.
Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6096 c046a42c-6fe2-441c-8c8c-71466251a162
Close gdbserver in child processes, so that only one stub tries to talk
to GDB at a time. Updated from an earlier patch by Paul Brook.
Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6095 c046a42c-6fe2-441c-8c8c-71466251a162
Built on top of previously enhanced breakpoint/watchpoint support, this
patch adds full debug register emulation for the x86 architecture.
Many corner cases were considered, and the result was successfully
tested inside a Linux guest with gdb, but I won't be surprised if one
or two scenarios still behave differently in reality.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5747 c046a42c-6fe2-441c-8c8c-71466251a162
This patch implemented the setxuid and setxgid syscalls for Alpha.
These syscalls return two values, both uid/euid and gid/egid.
In addition to returning the first value in $v0, the additional
value is returned in the $a4 register.
The syscalls are used instead of the separate syscalls for those values
used on other architectures (this is probably because Alpha Linux started
out syscall compatible with DEC/OSF/Tru64).
With this patch, the perlbmk benchmarks from Spec2000 run properly.
(Vince Weaver)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5722 c046a42c-6fe2-441c-8c8c-71466251a162
Replace POWERPC_EXCP_DEBUG by EXCP_DEBUG as the former can not happen in
user mode emulation, while the later can happen and should be handled.
Noticed by Andrew Stubbs.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5721 c046a42c-6fe2-441c-8c8c-71466251a162
This patch fixes the two following problems for Alpha linux-user:
- termbits.h is incorrectly using host IOC macros and structures
- IOC bitfields sizes are incorrectly set
This patch corrects the ioctl TCGETS done by isatty function call
on Alpha (when running SPEC crafty for instance).
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5704 c046a42c-6fe2-441c-8c8c-71466251a162
On Alpha the target to native fcntl definitions were missing. Because of
this, programs trying to open files with the O_CREAT option were getting
O_APPEND instead, etc.
This was keeping gcc from the spec benchmarks from running, among other
things.
(Vince Weaver)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5672 c046a42c-6fe2-441c-8c8c-71466251a162
env->*dt.base should fit target address space, so we should use
target_mmap to allocate them.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5666 c046a42c-6fe2-441c-8c8c-71466251a162
- Makefile.target: re-enable profiling for user qemu. It seems
profiling was (accidently?) removed by commit 3937
- syscall.c:
* add an include to get _mcleanup prototype
* add a call to _mcleanup for exit_group in a way
similar to what is done for exit
(Laurent Desnogues)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5642 c046a42c-6fe2-441c-8c8c-71466251a162
The shmat syscall returns an address, so we must use the
print_syscall_ret_addr function.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5565 c046a42c-6fe2-441c-8c8c-71466251a162
We must call the writev even if an iovec element is invalid. For
example, if the second element is invalid, the linux process the first
one.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5562 c046a42c-6fe2-441c-8c8c-71466251a162
We can't call the libc _exit function because it calls the exit_group
host syscall. We must call directly the exit host syscall.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5561 c046a42c-6fe2-441c-8c8c-71466251a162
could be expanded). This also fixes the bug with mips elf64 symbols
in current Qemu trunk.
* Use quicksort and binary search for symbol lookup.
* Remove unneeded entries from symbol table. This reduced a typical table
size (linux mips kernel) from 1764487 to 11656 entries.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5510 c046a42c-6fe2-441c-8c8c-71466251a162
glibc's structs dirent and dirent64 is different from in-kernel dirent
and dirent64. Kernel headers doesn't provide structs dirent(64) any
more. So we should add it to qemu headers.
To avoid conflict with glibc it called struct linux_dirent(64).
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5480 c046a42c-6fe2-441c-8c8c-71466251a162
Since these are only hints, we happily fake them for now
to make applications not barf on ENOSYS.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5386 c046a42c-6fe2-441c-8c8c-71466251a162
- Clean TARGET_MAP_xx macros to avoid nested #if #endif
- Add alpha specific values
Based on a patch by Tristan Gingold
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5356 c046a42c-6fe2-441c-8c8c-71466251a162
Also disable testing instructions unsupported by 64-bit binutils in
test-i386.c
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5277 c046a42c-6fe2-441c-8c8c-71466251a162
pread() and pwrite() have differences in arguments between ARM EABI and
OABI.
See arch/arm/kernel/entry-common.S in Linux kernel source for
additional information.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5272 c046a42c-6fe2-441c-8c8c-71466251a162
Move the transformation of struct stat64 into a separate function and
implement fstatat64() using it.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5268 c046a42c-6fe2-441c-8c8c-71466251a162
getgroups() returns the number of supplementary group IDs, so it's
unnessary to swap the entire array. It can dramatically speed up
the syscall: on recent Linux kernels NGROUPS_MAX=65536.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5267 c046a42c-6fe2-441c-8c8c-71466251a162
According to man page getgroups(2):
If size is zero, list is not modified, but the total number of
supplementary group IDs for the process is returned.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5266 c046a42c-6fe2-441c-8c8c-71466251a162
With this container_of can actually be used without causing build errors.
Reformat container_of.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5234 c046a42c-6fe2-441c-8c8c-71466251a162
Some headers (e.g. signal.h) include asm/elf.h and the chaos of macro
redefinitions ensues, this kludge avoids it.
Alternative way to fight that would be to change all ELF_XXX and some
other definitions to QEMU_ELF_XXX or something to that effect.
This patch concludes the quest for enabling linux-user on PPC64,
however, since qemu_mallocz uses mmap and, at least on this system,
mmap tends to return values that do not fit into 32bit, emulation for
32bit targets does not work without some hacks wich are to disgusting
to commit (and as `man mmap' tells us MAP_32BIT is only implemented on
X86_64)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5037 c046a42c-6fe2-441c-8c8c-71466251a162
p in this case is uint32_t *
e1/e2 are unsigned ints initialized from arithmetics performed on
unsigned longs
The mistake was, probably, never noticed due to the absence of any
big endian linux-user host. The types e1/e2 and p begs the quesiton
why this function takes longs at all.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5036 c046a42c-6fe2-441c-8c8c-71466251a162
Testing qemu-x86_64, I happen to run df and came across these mistakes
in the target_statfs/target_statfs64 structure definitions (reference:
linux/include/asm-x86/statfs.h).
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4895 c046a42c-6fe2-441c-8c8c-71466251a162
Fix a typo in my previous comming (spotted by Laurent Desnouges).
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4877 c046a42c-6fe2-441c-8c8c-71466251a162
