Allow cpu 'host' to enable SVE when it's available, unless the
user chooses to disable it with the added 'sve=off' cpu property.
Also give the user the ability to select vector lengths with the
sve<N> properties. We don't adopt 'max' cpu's other sve property,
sve-max-vq, because that property is difficult to use with KVM.
That property assumes all vector lengths in the range from 1 up
to and including the specified maximum length are supported, but
there may be optional lengths not supported by the host in that
range. With KVM one must be more specific when enabling vector
lengths.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Message-id: 20191031142734.8590-10-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extend the SVE vq map initialization and validation with KVM's
supported vector lengths when KVM is enabled. In order to determine
and select supported lengths we add two new KVM functions for getting
and setting the KVM_REG_ARM64_SVE_VLS pseudo-register.
This patch has been co-authored with Richard Henderson, who reworked
the target/arm/cpu64.c changes in order to push all the validation and
auto-enabling/disabling steps into the finalizer, resulting in a nice
LOC reduction.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Message-id: 20191031142734.8590-9-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce cpu properties to give fine control over SVE vector lengths.
We introduce a property for each valid length up to the current
maximum supported, which is 2048-bits. The properties are named, e.g.
sve128, sve256, sve384, sve512, ..., where the number is the number of
bits. See the updates to docs/arm-cpu-features.rst for a description
of the semantics and for example uses.
Note, as sve-max-vq is still present and we'd like to be able to
support qmp_query_cpu_model_expansion with guests launched with e.g.
-cpu max,sve-max-vq=8 on their command lines, then we do allow
sve-max-vq and sve<N> properties to be provided at the same time, but
this is not recommended, and is why sve-max-vq is not mentioned in the
document. If sve-max-vq is provided then it enables all lengths smaller
than and including the max and disables all lengths larger. It also has
the side-effect that no larger lengths may be enabled and that the max
itself cannot be disabled. Smaller non-power-of-two lengths may,
however, be disabled, e.g. -cpu max,sve-max-vq=4,sve384=off provides a
guest the vector lengths 128, 256, and 512 bits.
This patch has been co-authored with Richard Henderson, who reworked
the target/arm/cpu64.c changes in order to push all the validation and
auto-enabling/disabling steps into the finalizer, resulting in a nice
LOC reduction.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Beata Michalska <beata.michalska@linaro.org>
Message-id: 20191031142734.8590-5-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the query-cpu-model-expansion QMP command to Arm. We
do this selectively, only exposing CPU properties which represent
optional CPU features which the user may want to enable/disable.
Additionally we restrict the list of queryable cpu models to 'max',
'host', or the current type when KVM is in use. And, finally, we only
implement expansion type 'full', as Arm does not yet have a "base"
CPU type. More details and example queries are described in a new
document (docs/arm-cpu-features.rst).
Note, certainly more features may be added to the list of advertised
features, e.g. 'vfp' and 'neon'. The only requirement is that we can
detect invalid configurations and emit failures at QMP query time.
For 'vfp' and 'neon' this will require some refactoring to share a
validation function between the QMP query and the CPU realize
functions.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Beata Michalska <beata.michalska@linaro.org>
Message-id: 20191031142734.8590-2-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
=UXR/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging
TCG Plugins initial implementation
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
travis.yml: enable linux-gcc-debug-tcg cache
MAINTAINERS: add me for the TCG plugins code
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
.travis.yml: add --enable-plugins tests
include/exec: wrap cpu_ldst.h in CONFIG_TCG
accel/stubs: reduce headers from tcg-stub
tests/plugin: add hotpages to analyse memory access patterns
tests/plugin: add instruction execution breakdown
tests/plugin: add a hotblocks plugin
tests/tcg: enable plugin testing
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
tests/tcg: move "virtual" tests to EXTRA_TESTS
tests/tcg: set QEMU_OPTS for all cris runs
tests/tcg/Makefile.target: fix path to config-host.mak
tests/plugin: add sample plugins
linux-user: support -plugin option
vl: support -plugin option
plugin: add qemu_plugin_outs helper
plugin: add qemu_plugin_insn_disas helper
plugin: expand the plugin_init function to include an info block
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds support to handle failover device pairs of a virtio-net
device and a (vfio-)pci device, where the virtio-net acts as the standby
device and the (vfio-)pci device as the primary.
The general idea is that we have a pair of devices, a (vfio-)pci and a
emulated (virtio-net) device. Before migration the vfio device is
unplugged and data flows to the emulated device, on the target side
another (vfio-)pci device is plugged in to take over the data-path. In the
guest the net_failover module will pair net devices with the same MAC
address.
To achieve this we need:
1. Provide a callback function for the should_be_hidden DeviceListener.
It is called when the primary device is plugged in. Evaluate the QOpt
passed in to check if it is the matching primary device. It returns
if the device should be hidden or not.
When it should be hidden it stores the device options in the VirtioNet
struct and the device is added once the VIRTIO_NET_F_STANDBY feature is
negotiated during virtio feature negotiation.
If the virtio-net devices are not realized at the time the (vfio-)pci
devices are realized, we need to connect the devices later. This way
we make sure primary and standby devices can be specified in any
order.
2. Register a callback for migration status notifier. When called it
will unplug its primary device before the migration happens.
3. Register a callback for the migration code that checks if a device
needs to be unplugged from the guest.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <20191029114905.6856-11-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is mostly extracted from Emilio's more verbose commit comments
with some additional verbiage from me.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Similarly to features for struct types introduce the feature flags also
for commands. This will allow notifying management layers of fixes and
compatible changes in the behaviour of a command which may not be
detectable any other way.
The changes were heavily inspired by commit 6a8c0b5102.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191018081454.21369-3-armbru@redhat.com>
Document the new microvm machine type.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Hyper-V TLFS specifies this enlightenment as:
"NoNonArchitecturalCoreSharing - Indicates that a virtual processor will never
share a physical core with another virtual processor, except for virtual
processors that are reported as sibling SMT threads. This can be used as an
optimization to avoid the performance overhead of STIBP".
However, STIBP is not the only implication. It was found that Hyper-V on
KVM doesn't pass MD_CLEAR bit to its guests if it doesn't see
NoNonArchitecturalCoreSharing bit.
KVM reports NoNonArchitecturalCoreSharing in KVM_GET_SUPPORTED_HV_CPUID to
indicate that SMT on the host is impossible (not supported of forcefully
disabled).
Implement NoNonArchitecturalCoreSharing support in QEMU as tristate:
'off' - the feature is disabled (default)
'on' - the feature is enabled. This is only safe if vCPUS are properly
pinned and correct topology is exposed. As CPU pinning is done outside
of QEMU the enablement decision will be made on a higher level.
'auto' - copy KVM setting. As during live migration SMT settings on the
source and destination host may differ this requires us to add a migration
blocker.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20191018163908.10246-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ARM ACPI memory hotplug support +
tests for new arm/virt ACPI tables.
Virtio fs support (no migration).
A vhost-user reconnect bugfix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdpjPbAAoJECgfDbjSjVRpQqUH/2xyT++y8K17mCI1IILLZd3d
eOqElEHz78qlEfR2euv63YksZoeHpMO5HiAdwOGGF8CjcaCT4Hl+pPDffTYVXtt+
VZ88vSSXL49wpMcpvRGR5Isy0eXJzWilTBMu2eu8phN9tX82dlu08Oi4XGAosrBJ
uZg61DyiGDnSOpoofHhjvXJEaiL0pzkTjf8qAoW3TaVcB9NQKnunMEIDD646JS5z
AAj4+XBJfUG9cp7/MG+djjVmJDdUpjL5e5uWNWakbgUVqSbHog78RIrBoD6SH7pt
/6hHHoSM9VX1wWgdTdVdNAQAZVnWs31w4v31d8UfaT15KJEoG47U0gDgmLzXDyo=
=+xdg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, acpi: features, fixes, tests
ARM ACPI memory hotplug support +
tests for new arm/virt ACPI tables.
Virtio fs support (no migration).
A vhost-user reconnect bugfix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2019 22:02:19 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio: add vhost-user-fs-pci device
virtio: add vhost-user-fs base device
virtio: Add virtio_fs linux headers
tests/acpi: add expected tables for arm/virt
tests: document how to update acpi tables
tests: Add bios tests to arm/virt
tests: allow empty expected files
tests/acpi: add empty files
tests: Update ACPI tables list for upcoming arm/virt tests
docs/specs: Add ACPI GED documentation
hw/arm: Use GED for system_powerdown event
hw/arm: Factor out powerdown notifier from GPIO
hw/arm/virt-acpi-build: Add PC-DIMM in SRAT
hw/arm/virt: Enable device memory cold/hot plug with ACPI boot
hw/arm/virt: Add memory hotplug framework
hw/acpi: Add ACPI Generic Event Device Support
hw/acpi: Do not create memory hotplug method when handler is not defined
hw/acpi: Make ACPI IO address space configurable
vhost-user: save features if the char dev is closed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- block: Fix crash with qcow2 partial cluster COW with small cluster
sizes (misaligned write requests with BDRV_REQ_NO_FALLBACK)
- qcow2: Fix integer overflow potentially causing corruption with huge
requests
- vhdx: Detect truncated image files
- tools: Support help options for --object
- Various block-related replay improvements
- iotests/028: Fix for long $TEST_DIRs
-----BEGIN PGP SIGNATURE-----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=gCHy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- block: Fix crash with qcow2 partial cluster COW with small cluster
sizes (misaligned write requests with BDRV_REQ_NO_FALLBACK)
- qcow2: Fix integer overflow potentially causing corruption with huge
requests
- vhdx: Detect truncated image files
- tools: Support help options for --object
- Various block-related replay improvements
- iotests/028: Fix for long $TEST_DIRs
# gpg: Signature made Mon 14 Oct 2019 17:02:54 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
iotests: Test large write request to qcow2 file
qcow2: Limit total allocation range to INT_MAX
qemu-nbd: Support help options for --object
qemu-img: Support help options for --object
qemu-io: Support help options for --object
vl: Split off user_creatable_print_help()
iotests/028: Fix for long $TEST_DIRs
block: Reject misaligned write requests with BDRV_REQ_NO_FALLBACK
replay: add BH oneshot event for block layer
replay: finish record/replay before closing the disks
replay: don't drain/flush bdrv queue while RR is working
replay: update docs for record/replay with block devices
replay: disable default snapshot for record/replay
block: implement bdrv_snapshot_goto for blkreplay
block/vhdx: add check for truncated image files
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
tracetool needs to know the group name ("all", "root", or a specific
subdirectory). Also remove the stdin redirection because tracetool.py
needs the path to the trace-events file. Update the documentation.
Fixes: 2098c56a9b
("trace: move setting of group name into Makefiles")
Buglink: https://bugs.launchpad.net/bugs/1844814
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191009135154.10970-1-stefanha@redhat.com>
This patch updates the description of the command lines for using
record/replay with attached block devices.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
RCU_READ_LOCK_GUARD() takes the rcu_read_lock and then uses glib's
g_auto infrastructure (and thus whatever the compiler's hooks are) to
release it on all exits of the block.
WITH_RCU_READ_LOCK_GUARD() is similar but is used as a wrapper for the
lock, i.e.:
WITH_RCU_READ_LOCK_GUARD() {
stuff under lock
}
Note the 'unused' attribute is needed to work around clang bug:
https://bugs.llvm.org/show_bug.cgi?id=43482
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20191007143642.301445-2-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Documents basic concepts of ACPI Generic Event device(GED)
and interface between QEMU and the ACPI BIOS.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20190918130633.4872-10-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It was pointed out we haven't documented the check-tcg part of the
build system. Attempt to rectify that now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We represent the parse tree as OrderedDict. We fetch optional dict
members with .get(). So far, so good.
We represent null literals as None. .get() returns None both for
"absent" and for "present, value is the null literal". Uh-oh.
Test features-if-invalid exposes this bug: "'if': null" is
misinterpreted as absent "if".
We added null to the schema language to "allow [...] an explicit
default value" (commit e53188ada5 "qapi: Allow true, false and null in
schema json", v2.4.0). Hasn't happened; null is still unused except
as generic invalid value in tests/.
To fix, we'd have to replace .get() by something more careful, or
represent null differently. Feasible, but we got more and bigger fish
to fry right now. Remove the null literal from the schema language.
Replace null in tests by another invalid value.
Test features-if-invalid now behaves as it should.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-10-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We document the language by giving patterns of valid JSON objects.
The patterns contain placeholders we don't define anywhere; their
names have to speak for themselves. I guess they do, but I'd prefer a
bit more rigor. Provide a grammar instead, and rework the text
accordingly.
Documentation for QAPI schema conditionals (commit 967c885108,
6cc32b0e14, 87adbbffd4..3e270dcacc) and feature flags (commit
6a8c0b5102) was bolted on. The sections documenting types, commands
and events don't mention them. Section "Features" and "Configuring
the schema" then provide additional syntax for types, commands and
events. I hate that. Fix the sections documenting types, commands
and events to provide accurate syntax, and point to "Features" and
"Configuring the schema" for details.
We talk about "(top-level) expressions other than include and pragma".
Adopt more convenient terminology: a (top-level) expression is either
a directive (include or pragma) or a definition (anything else).
Avoid the terms "dictionary" and "key". Stick to JSON terminology
"object" and "member name" instead.
While there, make spacing more consistent.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-16-armbru@redhat.com>
The introduction to the QAPI schema is somewhat rambling. Rewrite for
clarity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-15-armbru@redhat.com>
We have some compatibility advice buried in sections "Enumeration
types" and "Struct types". Compatibility is actually about commands
and events. It devolves to the types used there. All kinds of types,
not just enumerations and structs.
Replace the existing advice by a new section "Compatibility
considerations".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-14-armbru@redhat.com>
[Squash in paragraph on invisible schema changes, as per Eric's review]
Section "QMP/Guest agent schema" starts with a brief introduction,
then subsection "Comments", then subsection "Schema overview" (more
elaborate introduction), and only then talks about schema entities
like types, commands, and so forth.
Subsection "Comments" is long and tiring: almost 500 words, mostly
about doc comments. Move the doc comment part to its own subsection
"Documentation comments" at the very end of "QMP/Guest agent schema".
Subsection "Schema overview" explains naming rules at considerable
length: 250 words. Move this part to its own subsection "Naming rules
and reserved names" right after the subsections on schema entities.
Subsection "Enumeration types" is wedged between "Struct types" and
"Union types". Move it before "Struct types".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-13-armbru@redhat.com>
Absent flat union branches default to the empty struct (since commit
800877bb16 "qapi: allow empty branches in flat unions"). But an
attempt to omit all of them is rejected with "Union 'FOO' has no
branches". Harmless oddity, but it's easy to avoid, so do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-11-armbru@redhat.com>
[Commit message typo fixed]
The specification claims "Each expression that isn't an include
directive may be preceded by a documentation block", but the code also
rejects them for pragma directives. The code is correct. Fix the
specification.
The specification reserves member names starting with 'has_', but the
code also reserves name 'u'. Fix the specification.
The specification claims "The string 'max' is not allowed as an enum
value". Untrue. Fix the specification. While there, delete the
naming advice, because it's redundant with the naming rules in section
"Schema overview"
The specification claims "No branch of the union can be named 'max',
as this would collide with the implicit enum". Untrue. Fix the
specification.
The specification claims "It is not allowed to name an event 'MAX',
since the generator also produces a C enumeration of all event names
with a generated _MAX value at the end." Untrue. Fix the
specification.
The specification claims "All branches of the union must be complex
types", but the code permits only struct types. The code is correct.
Fix the specification.
The specification claims a command's return type "must be the string
name of a complex or built-in type, a one-element array containing the
name of a complex or built-in type" unless the command is in pragma
'returns-whitelist'. The code does not permit built-in types. Fix
the specification.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-5-armbru@redhat.com>
Commands and events can define their argument type inline (default) or
by referring to another type ('boxed': true, since commit c818408e44
"qapi: Implement boxed types for commands/events", v2.7.0). The
unboxed inline definition is an (anonymous) struct type. The boxed
type may be a struct, union, or alternate type.
The latter is problematic: docs/interop/qemu-spec.txt requires the
value of the 'data' key to be a json-object, but any non-degenerate
alternate type has at least one branch that isn't.
Fortunately, we haven't made use of alternates in this context outside
tests/. Drop support for them.
QAPISchemaAlternateType.is_empty() is now unused. Drop it, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-4-armbru@redhat.com>
Event format ending with newlines confuse the trace reports.
Forbid them.
Add a check to refuse new format added with trailing newline:
$ make
[...]
GEN hw/misc/trace.h
Traceback (most recent call last):
File "scripts/tracetool.py", line 152, in <module>
main(sys.argv)
File "scripts/tracetool.py", line 143, in main
events.extend(tracetool.read_events(fh, arg))
File "scripts/tracetool/__init__.py", line 367, in read_events
event = Event.build(line)
File "scripts/tracetool/__init__.py", line 281, in build
raise ValueError("Event format can not end with a newline character")
ValueError: Error at hw/misc/trace-events:121: Event format can not end with a newline character
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190916095121.29506-3-philmd@redhat.com
Message-Id: <20190916095121.29506-3-philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows to receive mouse and keyboard events from
a Barrier server.
This is enabled by adding the following parameter on the
command line
... -object input-barrier,id=$id,name=$name ...
Where $name is the name declared in the screens section of barrier.conf
The barrier server (barriers) must be configured and must run on the
local host.
For instance:
section: screens
localhost:
...
VM-1:
...
end
section: links
localhost:
right = VM-1
VM-1:
left = localhost
end
Then on the QEMU command line:
... -object input-barrier,id=barrie0,name=VM-1 ...
When the mouse will move out of the screen of the local host on
the right, the mouse and the keyboard will be grabbed and all
related events will be send to the guest OS.
This is usefull when qemu is configured without emulated graphic card
but with a VFIO attached graphic card.
More information about Barrier can be found at:
https://github.com/debauchee/barrier
This avoids to install the Barrier server in the guest OS,
for instance when it is not supported or during the installation.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20190906083812.29487-1-laurent@vivier.eu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch documents the steps to use virtio pmem.
It also documents other useful information about
virtio pmem e.g use-case, comparison with Qemu NVDIMM
backend and current limitations.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <20190821121624.5382-1-pagupta@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Persistent backend setup requires some knowledge about nvdimm and ndctl
tool. Some users report they may struggle to gather these knowledge and
have difficulty to setup it properly.
Here we provide two examples for persistent backend and gives the link
to ndctl. By doing so, user could try it directly and do more
investigation on persistent backend setup with ndctl.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <20190801004053.7021-1-richardw.yang@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The qemu-ga documentation is currently in qemu-ga.texi in
Texinfo format, which we present to the user as:
* a qemu-ga manpage
* a section of the main qemu-doc HTML documentation
Convert the documentation to rST format, and present it to
the user as:
* a qemu-ga manpage
* part of the interop/ Sphinx manual
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: 20190905131040.8350-1-peter.maydell@linaro.org
Commit 78dd48df3 removed the last caller of register_savevm_live for an
instantiable device (rather than a single system wide device);
so trim out the parameter.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190822115433.12070-1-dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
- Advertise NBD_FLAG_CAN_MULTI_CONN on readonly images
- Tolerate larger set of server error responses during handshake
- More precision on handling fallocate() failures due to alignment
- Better documentation of NBD connection URIs
- Implement new extension NBD_CMD_FLAG_FAST_ZERO to benefit qemu-img convert
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAl1xeUEACgkQp6FrSiUn
Q2qCTQgAh0Q8HM6qDhDCTtNZ/HxxNTZ7n1O9ZB7bTQ+S6miFPh77+qsI/Gk81rJR
iwPKv1k8JZBnWtciwl2uynBCVlxHmBtxmVlzc66BVg3TMyOx3Eedsbel9Dl5QUgp
JREwPUN0uyly+zDL8X/7WB+Xmldz2u6cbnfl8JeszCscnhJ4cFNMzW5b4gaCpi73
OYt8AU2vg8c9yDK6lb/Xcc7dGSAba1vbcTSc6GPaGGlY5nPM/JKsWjlU8Abg2krM
m/mGpQzsb72xcL/9/vY17xarFi8uz4uU+U0Ohpe5XYl+IO/RiEgjokitlgrUtMWi
LNVKWj+5E0lIsNVSwhIWLEQxQACbjw==
=P3mc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-09-05-v2' into staging
nbd patches for 2019-09-05
- Advertise NBD_FLAG_CAN_MULTI_CONN on readonly images
- Tolerate larger set of server error responses during handshake
- More precision on handling fallocate() failures due to alignment
- Better documentation of NBD connection URIs
- Implement new extension NBD_CMD_FLAG_FAST_ZERO to benefit qemu-img convert
# gpg: Signature made Thu 05 Sep 2019 22:08:17 BST
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2019-09-05-v2:
nbd: Implement server use of NBD FAST_ZERO
nbd: Implement client use of NBD FAST_ZERO
nbd: Prepare for NBD_CMD_FLAG_FAST_ZERO
nbd: Improve per-export flag handling in server
docs: Update preferred NBD device syntax
block: workaround for unaligned byte range in fallocate()
nbd: Tolerate more errors to structured reply request
nbd: Use g_autofree in a few places
nbd: Advertise multi-conn for shared read-only connections
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit fe0480d6 and friends added BDRV_REQ_NO_FALLBACK as a way to
avoid wasting time on a preliminary write-zero request that will later
be rewritten by actual data, if it is known that the write-zero
request will use a slow fallback; but in doing so, could not optimize
for NBD. The NBD specification is now considering an extension that
will allow passing on those semantics; this patch updates the new
protocol bits and 'qemu-nbd --list' output to recognize the bit, as
well as the new errno value possible when using the new flag; while
upcoming patches will improve the client to use the feature when
present, and the server to advertise support for it.
The NBD spec recommends (but not requires) that ENOTSUP be avoided for
all but failures of a fast zero (the only time it is mandatory to
avoid an ENOTSUP failure is when fast zero is supported but not
requested during write zeroes; the questionable use is for ENOTSUP to
other actions like a normal write request). However, clients that get
an unexpected ENOTSUP will either already be treating it the same as
EINVAL, or may appreciate the extra bit of information. We were
equally loose for returning EOVERFLOW in more situations than
recommended by the spec, so if it turns out to be a problem in
practice, a later patch can tighten handling for both error codes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190823143726.27062-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: tweak commit message, also handle EOPNOTSUPP]
The NBD specification defines NBD_FLAG_CAN_MULTI_CONN, which can be
advertised when the server promises cache consistency between
simultaneous clients (basically, rules that determine what FUA and
flush from one client are able to guarantee for reads from another
client). When we don't permit simultaneous clients (such as qemu-nbd
without -e), the bit makes no sense; and for writable images, we
probably have a lot more work before we can declare that actions from
one client are cache-consistent with actions from another. But for
read-only images, where flush isn't changing any data, we might as
well advertise multi-conn support. What's more, advertisement of the
bit makes it easier for clients to determine if 'qemu-nbd -e' was in
use, where a second connection will succeed rather than hang until the
first client goes away.
This patch affects qemu as server in advertising the bit. We may want
to consider patches to qemu as client to attempt parallel connections
for higher throughput by spreading the load over those connections
when a server advertises multi-conn, but for now sticking to one
connection per nbd:// BDS is okay.
See also: https://bugzilla.redhat.com/1708300
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190815185024.7010-1-eblake@redhat.com>
[eblake: tweak blockdev-nbd.c to not request shared when writable,
fix iotest 233]
Reviewed-by: John Snow <jsnow@redhat.com>
In our documentation, we use a mix of "$QEMU", "qemu-system-i386" and
"qemu-system-x86_64" when we give examples to the users how to run
QEMU. Some more consistency would be good here. Also some distributions
use different names for the QEMU binary (e.g. "qemu-kvm" in RHEL), so
providing more flexibility here would also be good. Thus let's define
some variables for the names of the QEMU command and use those in the
documentation instead: @value{qemu_system} for generic examples, and
@value{qemu_system_x86} for examples that only work with the x86
binaries.
Message-Id: <20190828093447.12441-1-thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
First ppc and spapr pull request for qemu-4.2. Includes:
* Some TCG emulation fixes and performance improvements
* Support for the mffsl instruction in TCG
* Added missing DPDES SPR
* Some enhancements to the emulation of the XIVE interrupt
controller
* Cleanups to spapr MSI management
* Some new suspend/resume infrastructure and a draft suspend
implementation for spapr
* New spapr hypercall for TPM communication (will be needed for
secure guests under an Ultravisor)
* Fix several memory leaks
And a few other assorted fixes.
-----BEGIN PGP SIGNATURE-----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=E+7d
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.2-20190821' into staging
ppc patch queue for 2019-08-21
First ppc and spapr pull request for qemu-4.2. Includes:
* Some TCG emulation fixes and performance improvements
* Support for the mffsl instruction in TCG
* Added missing DPDES SPR
* Some enhancements to the emulation of the XIVE interrupt
controller
* Cleanups to spapr MSI management
* Some new suspend/resume infrastructure and a draft suspend
implementation for spapr
* New spapr hypercall for TPM communication (will be needed for
secure guests under an Ultravisor)
* Fix several memory leaks
And a few other assorted fixes.
# gpg: Signature made Wed 21 Aug 2019 08:24:44 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.2-20190821: (42 commits)
ppc: Fix emulated single to double denormalized conversions
ppc: Fix emulated INFINITY and NAN conversions
ppc: conform to processor User's Manual for xscvdpspn
ppc: Add support for 'mffsl' instruction
target/ppc: Add Directed Privileged Door-bell Exception State (DPDES) SPR
spapr/xive: Mask the EAS when allocating an IRQ
spapr: Implement better workaround in spapr-vty device
spapr/irq: Drop spapr_irq_msi_reset()
spapr/pci: Free MSIs during reset
spapr/pci: Consolidate de-allocation of MSIs
ppc: remove idle_timer logic
spapr: Implement ibm,suspend-me
i386: use machine class ->wakeup method
machine: Add wakeup method to MachineClass
ppc/xive: Improve 'info pic' support
ppc/xive: Provide silent escalation support
ppc/xive: Provide unconditional escalation support
ppc/xive: Provide escalation support
ppc/xive: Provide backlog support
ppc/xive: Implement TM_PULL_OS_CTX special command
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move query-target and its return type TargetInfo from misc.json to
machine.json, where they are covered by MAINTAINERS section "Machine
core". Also move its implementation from arch_init.c to
hw/core/machine-qmp-cmds, where it is likewise covered.
All users of SysEmuTarget are now in machine.json. Move it there from
common.json.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-3-armbru@redhat.com>
For now this only covers hcalls relating to TPM communication since
it's the only one particularly important from a QEMU perspective atm,
but others can be added here where it makes sense.
The full specification for all hcalls/ucalls will eventually be made
available in the public/OpenPower version of the PAPR specification.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-Id: <20190717205842.17827-2-mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch introduces docs/devel/replay.txt which describes the rules
that should be followed to make virtual devices usable in record/replay mode.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgauk@ispras.ru>
--
v9: fixed external virtual clock description (reported by Artem Pisarenko)
Message-Id: <156404426119.18669.6707258931552832854.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
- preallocation=falloc/full support for LUKS
- Various minor fixes
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl1awg0SHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9Au70H/jTfnZ5HGCnuMG9Qfz592b3OJzLxAUxy
zRYZeYeQv2iBAJ8D3guJb4TIsvs9FgiZq6W+a+uXPZUfV2cPjHEcl2votnKuyWsx
udzR5wyGEbZjeMIv5lhzWMf3oqWin5MVDFQ2xUSjt9rfNDiHH4pMHuLO6AGkVaRS
MEOEs1/GEZ1mXPckG00YBJXMgmsk+7xWZ5cMjUI8Hsa1/nC2GLckh2j5y2rt3ppc
dt2he6/etnK0d8Yt8yZXyNl8xSW95f0Z+a1RefgGX5n3kCV6K/9hkRIhCTdunzDd
hULNummeZghjbn0HLyFjEnJlzSglWYprUsQj1HaXB4/LwMUwj3yNxHk=
=dDid
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-08-19' into staging
Block patches:
- preallocation=falloc/full support for LUKS
- Various minor fixes
# gpg: Signature made Mon 19 Aug 2019 16:36:45 BST
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2019-08-19:
doc: Preallocation does not require writing zeroes
iotests: Fix 141 when run with qed
vpc: Do not return RAW from block_status
vmdk: Make block_status recurse for flat extents
vdi: Make block_status recurse for fixed images
iotests: Full mirror to existing non-zero image
iotests: Test convert -n to pre-filled image
iotests: Convert to preallocated encrypted qcow2
vhdx: Fix .bdrv_has_zero_init()
vdi: Fix .bdrv_has_zero_init()
qcow2: Fix .bdrv_has_zero_init()
block: Use bdrv_has_zero_init_truncate()
block: Implement .bdrv_has_zero_init_truncate()
block: Add bdrv_has_zero_init_truncate()
mirror: Fix bdrv_has_zero_init() use
qemu-img: Fix bdrv_has_zero_init() use in convert
LUKS: support preallocation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When preallocating an encrypted qcow2 image, it just lets the protocol
driver write data and then does not mark the clusters as zero.
Therefore, reading this image will yield effectively random data.
As such, we have not fulfilled the promise of always writing zeroes when
preallocating an image in a while. It seems that nobody has really
cared, so change the documentation to conform to qemu's actual behavior.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190711132935.13070-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Call this form a "parameter", returning a value extracted
from the DisasContext.
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
