requester.h relied on qemu/compiler.h definitions to
handle GCC_FMT_ATTR() stub, but this include was removed as part
of scripted clean-ups via 30456d5:
all: Clean up includes
under the assumption that all C files would have included it via
qemu/osdep.h at that point. requester.cpp was likely missed
due to C++ files requiring manual/special handling as well as
VSS build options needing to be enabled to trigger build failures.
Fix this by including qemu/osdep.h. That in turn pulls in a
macro from qapi/error.h that conflicts with a struct field name
in requester.h, so fix that as well by renaming the field.
While we're at it, fix up provider.cpp/install.cpp to include
osdep.h as well.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Laszlo Ersek said: "The length check is off by one (in the safe direction); it
should be (nchars >= 2). The processing should be active for the wide string
L"\r\n" -- resulting in the empty wide string --, I believe."
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
* report rather than assert when VCPU count == 0
* fix up subject: s/set-vcpus/get-vcpus/
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
With automatically generated GUID, on minor version changes, an error
occurred, stating that there is a problem with the installer.
Now, a notification is shown, warning the user that another version of
this product is already installed, and that configuration or removal of
the existing version is possible through Add/Remove Programs on the
Control Panel (expected behavior).
Signed-off-by: Leonid Bloch <leonid@daynix.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Magic constants are a pain to use, especially when we run the
risk that our choice of '1' for QGA_SEEK_CUR might differ from
the host or guest's choice of SEEK_CUR. Better is to use an
enum value, via a qapi alternate type for back-compatibility.
With this,
{"command":"guest-file-seek", "arguments":{"handle":1,
"offset":0, "whence":"cur"}}
becomes a synonym for the older
{"command":"guest-file-seek", "arguments":{"handle":1,
"offset":0, "whence":1}}
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-9-git-send-email-peter.maydell@linaro.org
Commit 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they
keep coming back. Tracked down with the Coccinelle semantic patch
from commit 312fd5f.
Cc: Fam Zheng <famz@redhat.com>
Cc: Peter Crosthwaite <crosthwaitepeter@gmail.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Changchun Ouyang <changchun.ouyang@intel.com>
Cc: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-17-git-send-email-armbru@redhat.com>
Switch from using g_base64_decode over to qbase64_decode
in order to get error checking of the base64 input data.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=YrWd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2015-11-26' into staging
QMP and QObject patches
# gpg: Signature made Thu 26 Nov 2015 09:07:18 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-monitor-2015-11-26:
qjson: Limit number of tokens in addition to total size
qjson: surprise, allocating 6 QObjects per token is expensive
qjson: store tokens in a GQueue
qjson: Convert to parser to recursive descent
qjson: replace QString in JSONLexer with GString
qjson: Inline token_is_escape() and simplify
qjson: Inline token_is_keyword() and simplify
qjson: Give each of the six structural chars its own token type
qjson: Spell out some silent assumptions
check-qjson: Add test for JSON nesting depth limit
qjson: Don't crash when input exceeds nesting limit
qjson: Apply nesting limit more sanely
monitor: Plug memory leak on QMP error
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Even though we still have the "streamer" concept, the tokens can now
be deleted as they are read. While doing so convert from QList to
GQueue, since the next step will make tokens not a QObject and we
will have to do the conversion anyway.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1448300659-23559-4-git-send-email-pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
With previous commit we added gspawn-win64-helper-console.exe,
required for gspawn() mingw implementation.
Unfortunatly when running as a service without interactive
desktop, gspawn() also requires another helper app.
Added gspawn-win64-helper.exe and gspawn-win32-helper.exe
for corresponding architectures.
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
* remove trailing whitespace
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Exposing OS-specific SEEK_ constants in our qapi was a mistake
(if the host has SEEK_CUR as 1, but the guest has it as 2, then
the semantics are unclear what should happen); if we had a time
machine, we would instead expose only a symbolic enum. It's too
late to change the fact that we have an integer in qapi, but we
can at least document what mapping we want to enforce for all
qga clients (and luckily, it happens to be the mapping that both
Linux and Windows use); then fix the code to match that mapping.
It also helps us filter out unsupported SEEK_DATA and SEEK_HOLE.
In the future, we may wish to move our QGA_SEEK_* constants into
qga/qapi-schema.json, along with updating the schema to take an
alternate type (either the integer, or the string value of the
enum name) - but that's too much risk during hard freeze.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
According to the specification:
http://pubs.opengroup.org/onlinepubs/9699919799/functions/fopen.html
"the application shall ensure that output is not directly followed by
input without an intervening call to fflush() or to a file positioning
function (fseek(), fsetpos(), or rewind()), and input is not directly
followed by output without an intervening call to a file positioning
function, unless the input operation encounters end-of-file."
Without this change, an fwrite() followed by an fread() may lose the
previously written content, as shown in the following test.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1210246
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
* don't confuse {write,read}() with f{write,read}() in
commit msg (Laszlo)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This helper, gspawn-win64-helper-console.exe for 64-bit and
gspawn-win32-helper-console.exe for 32-bit environment,
is needed for gspawn() mingw implementation, used by guest-exec command.
Without these files guest-exec command on Windows will not
work with "file not found" diagnostic message.
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This was original behaviour before GLIB gspawn() rework and we rely on
this behaviour.
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
* add version check (2.33.2) for G_SPAWN_SEARCH_PATH_FROM_ENVP
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
envp == NULL must be passed inside gspawn() if it was not passed with
the command line. Original code inherits environment from the QGA,
which is wrong.
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For append file open modes, use FILE_APPEND_DATA for the desired access
for writing at the end of the file.
Version 2:
For "a+", "ab+", and "a+b" modes use FILE_APPEND_DATA|GENERIC_READ.
ORing in GENERIC_READ starts a read at the begining of the file. All
writes will append to the end fo the file.
Added white space to maintain the alignment of the guest_file_open_modes[].
Signed-off-by: Kirk Allan <kallan@suse.com>
Cc: qemu-stable@nongnu.org
* use FILE_GENERIC_APPEND macro, which provides same semantics as
FILE_APPEND_DATA, but retains other flags from GENERIC_WRITE
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Set fd non-blocking to avoid common use cases (like reading from a
named pipe) from hanging the agent. This was missed in the original
code.
The patch introduces qemu_set_handle_nonoblocking, the local analog
of qemu_set_nonblock for HANDLES.
The usage of handles in qemu_set_non/block is impossible, because for
win32 there is a difference between file discriptors and file handles,
and all file ops are made via Win32 api.
Signed-off-by: Olga Krishtal <okrishtal@parallels.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
CC: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
CloseHandle use HANDLE as an argument, but not *HANDLE
Signed-off-by: Olga Krishtal <okrishtal@parallels.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
qobject_to_qdict() crashes on null, which is a trap for the unwary.
Return null instead, and simplify a few callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1444918537-18107-4-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Implemented with base64-encoded strings in qga json protocol.
Glib portable GIOChannel is used for data I/O.
Optinal stdin parameter of guest-exec command is now used as
stdin content for spawned subprocess.
If capture-output bool flag is specified, guest-exec redirects out/err
file descriptiors internally to pipes and collects subprocess
output.
Guest-exe-status is modified to return this collected data to requestor
in base64 encoding.
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
* switch from 'struct GuestIOExecData' to 'GuestIOExecData'
* s/TRUE/true/g, s/FALSE/false/g for gboolean return values
* s/inp_data/input_data/
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
glib may return G_IO_STATUS_AGAIN which is actually not an error.
Also fixed a bug when on incomplete write buf pointer was not adjusted.
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
qemu-ga should not exit on guest-file-write to pipe without read end
but proper error code should be returned. The behavior of the
spawned process should be default thus SIGPIPE processing should be
reset to default after fork() but before exec().
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Guest-exec rewritten in platform-independent style with glib spawn.
Child process is spawn asynchronously and exit status can later
be picked up by guest-exec-status command.
stdin/stdout/stderr of the child now is redirected to /dev/null
Later we will add ability to specify stdin in guest-exec command
and to get collected stdout/stderr with guest-exec-status.
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
* use g_new0 in place of g_malloc for GuestExec struct
* commit msg spelling fixes
* s/inp-data/input-data
* document capture-input mode as false by default
* use GetProcessId() for pids on w32 instead of casting HANDLE
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This just makes code shorter and better.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Some guests don't expose memory blocks via sysfs at all. This
shouldn't be a failure, instead just return an empty list. For
other access failures we still report an error.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Move the default verbosity settings before loading the configuration
file, or it will overwrite it. Found thanks to writing qga tests :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Having a environment variable allows to override default configuration
path, useful for testing. Note that this can't easily be an argument,
since loading config is done before parsing the arguments.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For consistency with the rest of the comment blocks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A number of source files have statements accidentally
terminated by a double semicolon - eg 'foo = bar;;'.
This is harmless but a mistake none the less.
The tcg/ia64/tcg-target.c file is whitelisted because
it has valid use of ';;' in a comment containing assembly
code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This is particularly useful when we abort in error_propagate(),
because there the stack backtrace doesn't lead to where the error was
created. Looks like this:
Unexpected error in parse_block_error_action() at .../qemu/blockdev.c:322:
qemu-system-x86_64: -drive if=none,werror=foo: 'foo' invalid write error action
Aborted (core dumped)
Note: to get this example output, I monkey-patched drive_new() to pass
&error_abort to blockdev_init().
To keep the error handling boiler plate from growing even more, all
error_setFOO() become macros expanding into error_setFOO_internal()
with additional __FILE__, __LINE__, __func__ arguments. Not exactly
pretty, but it works.
The macro trickery breaks down when you take the address of an
error_setFOO(). Fortunately, we do that in just one place: qemu-ga's
Windows VSS provider and requester DLL wants to call
error_setg_win32() through a function pointer "to avoid linking glib
to the DLL". Use error_setg_win32_internal() there. The use of the
function pointer is already wrapped in a macro, so the churn isn't
bad.
Code size increases by some 35KiB for me (0.7%). Tolerable. Could be
less if we passed relative rather than absolute source file names to
the compiler, or forwent reporting __func__.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
requester.cpp uses this pattern to receive an error and pass it on to
the caller (err_is_set() macro peeled off for clarity):
... code that may set errset->errp ...
if (errset->errp && *errset->errp) {
... handle error ...
}
This breaks when errset->errp is null. As far as I can tell, it
currently isn't, so this is merely fragile, not actually broken.
The robust way to do this is to receive the error in a local variable,
then propagate it up, like this:
Error *err = NULL;
... code that may set err ...
if (err)
... handle error ...
error_propagate(errset->errp, err);
}
See also commit 5e54769, 0f230bf, a903f40.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qga_vss_fsfreeze() casts error_set_win32() from
void (*)(Error **, int, ErrorClass, const char *, ...)
to
void (*)(void **, int, int, const char *, ...)
The result is later called. Since the two types are not compatible,
the call is undefined behavior. It works in practice anyway.
However, there's no real need for trickery here. Clean it up as
follows:
* Declare struct Error, and fix the first parameter.
* Switch to error_setg_win32(). This gets rid of the troublesome
ErrorClass parameter. Requires converting error_setg_win32() from
macro to function, but that's trivially easy, because this is the
only user of error_set_win32().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Use NetUserSetInfo() to set the user password.
This function is notoriously known to be problematic for users with EFS
encrypted files. But the alternative, NetUserChangePassword() requires
the old password. Nevertheless, The EFS file should be recovered by
changing back to the old password.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This new option allows to review the agent configuration,
and ease the task of writing a configuration file.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
* removed unecessary keyfile != NULL prior to free
* documented --dump-conf is qemu-ga --help output
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Learn to configure the agent with a system configuration.
This may simplify command-line handling, especially when the blacklist
is long.
Among the other benefits, this may standardize the configuration of an
init service (instead of distro-specific init keys/files)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
* removed unecessary keyfile != NULL prior to free
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Now that main() has a single exit point, we can free a few
more allocations.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Once the options are populated, move the running state to
a run_agent() function.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
* fixed up an s/ga_state/s/ artifact causing segfault
* replaced g_list_free_full with g_list_foreach to maintain glib
2.22 compatibility
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Fill all default options during main(). This is a preparation patch
to allow to dump the configuration.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Move option parsing out of giant main().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Following patch will return allocated strings, so we must correctly
initialize alloc & free them. The nice side effect is that we no longer
have to check for "fixed_state_dir" to call ga_install_service() with a
NULL state dir. The default values are set after parsing the command
line options.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
'path' is already a global function, rename the variable since it's
going to be in global scope in a later patch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In order to avoid any confusion, let's allocate new strings when
splitting.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The function is going to be reused in a later patch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The option parsing is going to be moved to a separate function,
use exit() consistently.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Previously, if building out-of-tree, the MSI build would fail since
it wasn't able to find the needed files.
Signed-off-by: Leonid Bloch <leonid@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
* fixed up commit msg formating
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Previously, running the .msi would unregister the QEMU GA VSS service if QEMU GA was already installed on the machine, and then register it only if QEMU GA was NOT previously installed. This behavior caused the service to be registered only after the INITIAL installation, and any subsequent run of the .msi (to redo, repair, or upgrade the installation) ended in the service being unregistered.
Now, the VSS service is still unregistered if QEMU GA is already installed (so that a fix or an update could be performed) but then it is registered again (if the GA is not being uninstalled) thus finishing the repair/upgrade correctly. Additionally, downgrading is now prevented. If a user would like to downgrade a version, he/she must uninstall the newer version first.
Signed-off-by: Leonid Bloch <leonid@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This is done to follow the recommendations given here: https://msdn.microsoft.com/en-us/library/aa368269%28VS.85%29.aspx
Signed-off-by: Leonid Bloch <leonid@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For compatibility, all the letters in GUID should be capital.
Signed-off-by: Leonid Bloch <leonid@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
*added semi-colon to better delineate 2.2 vs. 2.4 versioning
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
PCIAddress inforfation is obtained via SetupApi, which provides the
information about address, bus, etc. We look throught entire device tree
in the system and try to find device object for given volume. For this PDO
SetupDiGetDeviceRegistryProperty is called, which reads PCI configuration
for a given devicei if it is possible.
This is the most convinient way for a userspace service. The lookup is
performed for every volume available. However, this information is
not mandatory for vss-provider.
In order to use SetupApi we need to notify linker about it. We do not need
to install additional libs, so we do not make separate configuration
option to use libsetupapi.su
SetupApi gives as the same information as kernel driver
with IRP_MN_QUERY_INTERFACE.
https://support.microsoft.com/en-us/kb/253232
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
* stub out get_pci_info if !CONFIG_QGA_NTDDSCSI
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
According to Microsoft disk location path can be obtained via
IOCTL_SCSI_GET_ADDRESS. Unfortunately this ioctl can not be used for all
devices. There are certain bus types which could be obtained with this
API. Please, refer to the following link for more details
https://technet.microsoft.com/en-us/library/ee851589(v=ws.10).aspx
Bus type could be obtained using IOCTL_STORAGE_QUERY_PROPERTY. Enum
STORAGE_BUS_TYPE describes all buses supported by OS.
Windows defines more bus types than Linux. Thus some values have been added
to GuestDiskBusType.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
* fixed warning in CreateFile due to use of NULL instead of 0
* only provide disk info when CONFIG_QGA_NTDDSCSI=y
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We should use GetVolumeXXX api to work with volumes. This will help us to
resolve the situation with volumes without drive letter, i.e. when the
volume is mounted as a folder. Such volume is called mounted folder.
This volume is a regular mounted volume from all other points of view.
The information about non mounted volume is reported as System Reserved.
This volume is not mounted and thus it is not writable.
GuestDiskAddressList API is not used because operations are performed with
volumes but no with disks. This means that spanned disk will
be counted and handled as a single volume. It is worth mentioning
that the information about every disk in the volume can be queried
via IOCTL_VOLUME_GET_VOLUME_DISK_EXTENTS.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We need qmp_quest_get_fsinfo togather with vss-provider, which works with
volumes. The call to this function is implemented via
FindFirst/NextVolumes. Moreover, volumes in Windows OS are filesystem unit,
so it will be more effective to work with them rather with devices.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
It's possible to set system time with dates after 2070, however, it's
not possible to set the RTC. It has limitation to up to year
2070 (1970+100). In order to keep both clock in sync and before the
kernel complains on invalid values, bail out early.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
By default, IPv4 prefixes will be derived by matching the address
to those returned by GetAdaptersInfo. IPv6 prefixes can not be
matched this way due to the unpredictable order of entries.
In Windows Vista/2008 guests and newer, both IPv4 and IPv6 prefixes
can be retrieved from OnLinkPrefixLength. Setting --extra-cflags
in the build configuration to "-D_WIN32_WINNT=0x600"
or greater makes OnLinkPrefixLength available. Setting --extra-cflags
is not required and if not set, the default approach to get the prefix
will be taken.
Signed-off-by: Kirk Allan <kallan@suse.com>
* drop ws2ipdef.h, it's missing on old mingw, and ws2tcpip.h already
includes it automatically on new builds
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Since we now require GLib 2.22+ (commit f40685c), we don't have to
work around lack of g_strcmp0() anymore.
This reverts commit 8f47747899.
Conflicts:
qemu-ga.c
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The current guest-fstrim support only returns an error if some
mountpoint was unable to be trimmed, skipping any possible additional
mountpoints. The result of the TRIM operation itself is also discarded.
This change returns a per mountpoint result of the TRIM operation. If an
error occurs on some mountpoints that error is returned and the
guest-fstrim continue with any additional mountpoints.
The returned values for errors, minimum and trimmed are dependant on the
filesystem, storage stacks and kernel version.
Signed-off-by: Justin Ossevoort <justin@quarantainenet.nl>
* s/type/struct/ in schema type definitions
* moved version annotation for new guest-fstrim return field to
the field itself rather than applying to the entire command
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The FITRIM ioctl updates the fstrim_range structure it receives. This
way the caller can determine how many bytes were trimmed. The
guest-fstrim logic reuses the same fstrim_range for each filesystem,
effectively limiting each filesystem to trim at most as much as the
previous was able to trim.
If a previous filesystem would have trimmed 0 bytes, than the next
filesystem would report an error 'Invalid argument' because a FITRIM
request with length 0 is not valid.
This change resets the fstrim_range structure for each filesystem.
Signed-off-by: Justin Ossevoort <justin@quarantainenet.nl>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
The script enables building Windows MSI installation package on Linux with wixl tool.
Signed-off-by: Yossi Hindin <yhindin@redhat.com>
Message-Id: <1430913460-13174-4-git-send-email-yhindin@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Existing command line options include '-s install' and '-s uninstall'.
These options install/uninstall both Windows QEMU GA service
and optional VSS COM server. The QEMU GA Windows service allows
always-on serving guest agent's QMP commands and VSS COM server
enables guest agent integration with Volume Shadow Service.
This commit introdices new options '-s vss-install' and '-s vss-uninstall',
affecting only GA VSS COM server registration. The new options are useful
for registering and unregistering the COM server during MSI installation,
upgrade and uninstallation.
Signed-off-by: Yossi Hindin <yhindin@redhat.com>
Message-Id: <1430913460-13174-2-git-send-email-yhindin@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Referring to "type" as both a meta-type (built-in, enum, union,
alternate, or struct) and a specific type (the name that the
schema uses for declaring structs) is confusing. Do the bulk of
the conversion to "struct" in qapi schema, with a fairly
mechanical:
for f in `find -name '*.json'; do sed -i "s/'type'/'struct'/"; done
followed by manually filtering out the places where we have a
'type' embedded in 'data'. Then tweak a couple of tests whose
output changes slightly due to longer lines.
I also verified that the generated files for QMP and QGA (such
as qmp-commands.h) are the same before and after, as assurance
that I didn't leave in any accidental member name changes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
For a few QMP commands, we are forced to pass an arbitrary type
without tracking it properly in QAPI. Among the existing clients,
this unnamed type was spelled 'dict', 'visitor', and '**'; this
patch standardizes on '**', matching the documentation changes
earlier in the series.
Meanwhile, for the 'gen' key, we have been ignoring the value,
although the schema consistently used "'no'" ('success-response'
was hard-coded to checking for 'no'). But now that we can support
a literal "false" in the schema, we might as well use that rather
than ignoring the value or special-casing a random string. Note
that these are one-way switches (use of 'gen':true is not the same
as omitting 'gen'). Also, the use of '**' requires 'gen':false,
but the use of 'gen':false does not mandate the use of '**'.
There is no difference to the generated code. Add some tests on
what we'd like to guarantee, although it will take later patches
to clean up test results and actually enforce the use of a bool
parameter.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
All of them were reported by codespell.
Most typos are in comments, one is in an error message.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
configure script may add -fstack-protector-strong option instead
of -fstack-protector-all, depending on availability ( see
commit 63678e17c ). Both options have to by filtered out for
qga-vss.dll, otherwise MinGW cross-compilation fails at linking
stage.
Signed-off-by: Joseph Hindin <jhindin@daynix.com>
Message-Id: <1427906337-20805-2-git-send-email-jhindin@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's detected by coverity. Close the dirfd.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The command is not implemented correctly yet. The documentation allows
to not pass any value to set, in which case the time is re-read from
RTC. However, reading CMOS on Windows is not trivial to implement. So
instead of pretending we've set the correct time, fail explicitly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For memory block command, we only support for linux with sysfs.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This conveys general information about guest memory blocks. Currently,
just the memory block size.
The size of a memory block is architecture dependent, it represents the logical
unit upon which memory online/offline operations are to be performed.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
*generalized guest-get-memory-block-size to get-get-memory-block-info
for future extensibility
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We can change guest's online/offline state of memory blocks, by using
command 'guest-set-memory-blocks'.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We can get guest's memory block information by using command
"guest-get-memory-blocks", the returned value contains a list of memory block
info, such as phys-index, online state, can-offline info.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
*replaced guest-triggerable assertion with an error msg
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Introduce three new guest commands:
guest-get-memory-blocks, guest-set-memory-blocks, guest-get-memory-block-size.
With these three commands, we can support online/offline guest's memory block
(logical memory hotplug/unplug) as required from host.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
*generalized guest-get-memory-block-size to get-get-memory-block-info
for future extensibility
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The following commands are implemented:
- guest_file_open
- guest_file_close
- guest_file_write
- guest_file_read
- guest_file_seek
- guest_file_flush
Motivation is quite simple: Windows guests should be supported with the
same set of features as Linux one. Also this patch is a prerequisite for
Windows guest-exec command support.
Signed-off-by: Olga Krishtal <okrishtal@parallels.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Moved the code that sets non-blocking flag on fd into a separate function.
Signed-off-by: Simon Zolin <szolin@parallels.com>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
CC: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add a new 'guest-set-user-password' command for changing the password
of guest OS user accounts. This command is needed to enable OpenStack
to support its API for changing the admin password of guests running
on KVM/QEMU. It is not practical to provide a command at the QEMU
level explicitly targetting administrator account password change
only, since different guest OS have different names for the admin
account. While UNIX systems use 'root', Windows systems typically
use 'Administrator' and even that can be renamed. Higher level apps
like OpenStack have the ability to figure out the correct admin
account name since they have info that QEMU/libvirt do not.
The command accepts either the clear text password string, encoded
in base64 to make it 8-bit safe in JSON:
$ echo -n "123456" | base64
MTIzNDU2
$ virsh -c qemu:///system qemu-agent-command f21x86_64 \
'{ "execute": "guest-set-user-password",
"arguments": { "crypted": false,
"username": "root",
"password": "MTIzNDU2" } }'
{"return":{}}
Or a password that has already been run though a crypt(3) like
algorithm appropriate for the guest, again then base64 encoded:
$ echo -n '$6$n01A2Tau$e...snip...DfMOP7of9AJ1I8q0' | base64
JDYkb...snip...YT2Ey
$ virsh -c qemu:///system qemu-agent-command f21x86_64 \
'{ "execute": "guest-set-user-password",
"arguments": { "crypted": true,
"username": "root",
"password": "JDYkb...snip...YT2Ey" } }'
NB windows support is desirable, but not implemented in this
patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Function send_response(s, &qdict->base) returns a negative number
when any failures occured. But strerror()'s parameter cannot be
negative. Let's change the testing condition and pass '-ret' to
strerr().
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If readdir_r fails, error_setg_errno will reference the freed
pointer *dirpath*.
Moreover, readdir_r may cause a buffer overflow, using readdir instead.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Technically, fcntl(soc, F_SETFL, O_NONBLOCK)
is incorrect since it clobbers all other file flags.
We can use F_GETFL to get the current flags, set or
clear the O_NONBLOCK flag, then use F_SETFL to set the flags.
Using the qemu_set_nonblock() wrapper.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Wangxin <wangxinxin.wang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently management softwares cannot know whether a qemu-ga command is
supported or not on the running platform until they actually execute it.
This patch disables unsupported commands at launch time of qemu-ga, so that
management softwares can check whether they are supported from 'enabled'
property of the result from 'guest-info' command.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add command to get mounted filesystems information in the guest.
The returned value contains a list of mountpoint paths and
corresponding disks info such as disk bus type, drive address,
and the disk controllers' PCI addresses, so that management layer
such as libvirt can resolve the disk backends.
For example, when `lsblk' result is:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sdb 8:16 0 1G 0 disk
`-sdb1 8:17 0 1024M 0 part
`-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test
sdc 8:32 0 1G 0 disk
`-sdc1 8:33 0 512M 0 part
`-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test
vda 252:0 0 25G 0 disk
`-vda1 252:1 0 25G 0 part /
where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1,
sdc is an IDE disk with PCI controller 0000:00:01.1, and
vda is a virtio-blk disk with PCI device 0000:00:06.0,
guest-get-fsinfo command will return the following result:
{"return":
[{"name":"dm-1",
"mountpoint":"/mnt/test",
"disk":[
{"bus-type":"scsi","bus":0,"unit":1,"target":0,
"pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}},
{"bus-type":"ide","bus":0,"unit":0,"target":0,
"pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}],
"type":"xfs"},
{"name":"vda1", "mountpoint":"/",
"disk":[
{"bus-type":"virtio","bus":0,"unit":0,"target":0,
"pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}],
"type":"ext4"}]}
In Linux guest, the disk information is resolved from sysfs. So far,
it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86
hosts, and "disk" parameter may be empty for unsupported disk types.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
*updated schema to report 2.2 as initial supported version
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If an array of mount point paths is specified as 'mountpoints' argument
of guest-fsfreeze-freeze-list, qemu-ga will only freeze the file systems
mounted on specified paths in Linux guests. Otherwise, it works as the
same way as guest-fsfreeze-freeze.
This would be useful when the host wants to create partial disk snapshots.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
*updated schema to report 2.2 as initial supported version
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This fixes a warning from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
token should be closed in all conditions.
So move CloseHandle(token) to "out" branch.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
acquire_privilege(), execute_async() and check_suspend_mode() do
nothing when called with an error set. Callers shouldn't do that, and
no caller does. Drop the superfluous tests.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Using error_is_set(ERRP) to find out whether a function failed is
either wrong, fragile, or unnecessarily opaque. It's wrong when ERRP
may be null, because errors go undetected when it is. It's fragile
when proving ERRP non-null involves a non-local argument. Else, it's
unnecessarily opaque (see commit 84d18f0).
The error_is_set(errp) in the guest agent command handler functions
are merely fragile, because all chall chains (do_qmp_dispatch() via
the generated marshalling functions) pass a non-null errp argument.
Make the code more robust and more obviously correct: receive the
error in a local variable, then propagate it through the parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Using error_is_set(errp) to check whether a function call failed is
fragile: it breaks when errp is null. ga_get_fd_handle() and
guest_file_handle_add() don't return a useful value when they fail,
but that's just stupid. Fix that, and check them instead. As far
as I can tell, errp can't be null there, but this is more robust and
more obviously correct.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
