This reverts commit 86dbcdd9c7.
The pre-save assert is gone now, so the migration blocker
is not needed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210721093347.338536-3-kraxel@redhat.com>
Since commit 551dbd0846 ("migration: check pre_save return in
vmstate_save_state") the pre_save hook can fail. So lets finally
use that to drop the guest-triggerable assert in qxl_pre_save().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210721093347.338536-2-kraxel@redhat.com>
When there are multiple queues attached to the same AIO context,
some requests may experience high latency, since in the worst case
the AIO engine queue is only flushed when it is full (MAX_EVENTS) or
there are no more queues plugged.
Commit 2558cb8dd4 ("linux-aio: increasing MAX_EVENTS to a larger
hardcoded value") changed MAX_EVENTS from 128 to 1024, to increase
the number of in-flight requests. But this change also increased
the potential maximum batch to 1024 elements.
When there is a single queue attached to the AIO context, the issue
is mitigated from laio_io_unplug() that will flush the queue every
time is invoked since there can't be others queue plugged.
Let's use the new `aio-max-batch` IOThread parameter to mitigate
this issue, limiting the number of requests in a batch.
We also define a default value (32): this value is obtained running
some benchmarks and it represents a good tradeoff between the latency
increase while a request is queued and the cost of the io_submit(2)
system call.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20210721094211.69853-4-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The `aio-max-batch` parameter will be propagated to AIO engines
and it will be used to control the maximum number of queued requests.
When there are in queue a number of requests equal to `aio-max-batch`,
the engine invokes the system call to forward the requests to the kernel.
This parameter allows us to control the maximum batch size to reduce
the latency that requests might accumulate while queued in the AIO
engine queue.
If `aio-max-batch` is equal to 0 (default value), the AIO engine will
use its default maximum batch size value.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20210721094211.69853-3-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Changes in preparation for next patches where we add a new
parameter not related to the poll mechanism.
Let's add two new generic functions (iothread_set_param and
iothread_get_param) that we use to set and get IOThread
parameters.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20210721094211.69853-2-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- Fix for tests/acceptance/virtio-gpu.py to match the change in device
name
- Fix for failure caught by tests/acceptance/multiprocess.py
PS: While not a maintainer for the subsystem in PATCH 7, I'm including
it as a one-off to facilitate the landing of the fix as discussed in
the mailing list.
-----BEGIN PGP SIGNATURE-----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=Bs7z
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber-gitlab/tags/python-next-pull-request' into staging
Acceptance Tests
- Fix for tests/acceptance/virtio-gpu.py to match the change in device
name
- Fix for failure caught by tests/acceptance/multiprocess.py
PS: While not a maintainer for the subsystem in PATCH 7, I'm including
it as a one-off to facilitate the landing of the fix as discussed in
the mailing list.
# gpg: Signature made Wed 21 Jul 2021 00:26:17 BST
# gpg: using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber-gitlab/tags/python-next-pull-request:
remote/memory: Replace share parameter with ram_flags
tests/acceptance/virtio-gpu.py: provide kernel and initrd hashes
tests/acceptance/virtio-gpu.py: use virtio-vga-gl
tests/acceptance/virtio-gpu.py: combine kernel command line
tests/acceptance/virtio-gpu.py: combine CPU tags
tests/acceptance/virtio-gpu.py: combine x86_64 arch tags
tests/acceptance/virtio-gpu.py: use require_accelerator()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
By providing kernel and initrd hashes, the test guarantees the
integrity of the images used and avoids the warnings set by
fetch_asset() when hashes are lacking.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210714174051.28164-7-crosa@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Since 49afbca3b, the use of an optional virgl renderer is not
available anymore, and since b36eb8860f, the way to choose a GL based
rendered is to use the "virtio-vga-gl" device.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210714174051.28164-6-crosa@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Both tests use the same kernel command line arguments, so there's no
need to have a common and then an additional set of arguments.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210714174051.28164-5-crosa@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Like previously done with the arch tags, all tests use the same CPU
value so it's possible to combine them at the class level.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210714174051.28164-4-crosa@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The test class in question is x86_64 specific, so it's possible to set
the tags at the class level.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210714174051.28164-3-crosa@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Since efe30d501 there's a shorthand for requiring specific
accelerators, and canceling the test if it's not available.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210714174051.28164-2-crosa@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Because commit f4063f9c31 ("meson: Introduce target-specific
Kconfig") ended being merged after commit 582079c9d2
("hw/tricore: Add testdevice for tests in tests/tcg/"), we
inadvertently added a symbol clash causing the build not to include
the testboard needed for check-tcg.
Fixes: f4063f9c31 ("meson: Introduce target-specific Kconfig")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210720114057.32053-2-alex.bennee@linaro.org>
[PMD: Updated description mentioning commits merged]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The ATI VGA device isn't a requisite for the Pegasos2 machine
because Linux only uses the serial console; see commit ba7e5ac18e
("hw/ppc: Add emulation of Genesi/bPlan Pegasos II") for rationale.
Using the default devices we don't have any problem:
$ qemu-system-ppc -M pegasos2
qemu-system-ppc: standard VGA not available
But when trying to explicitly use the ATI device we get an error:
$ qemu-system-ppc -M pegasos2 -vga none -bios pegasos2.rom -device ati-vga,romfile=
qemu-system-ppc: -device ati-vga,romfile=: 'ati-vga' is not a valid device model name
Add it as an implicit Kconfig dependency.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210515173716.358295-13-philmd@redhat.com>
Acked-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
When building the Pegasos2 machine stand-alone we get:
$ qemu-system-ppc -M pegasos2 -bios pegasos2.rom
ERROR:qom/object.c:714:object_new_with_type: assertion failed: (type != NULL)
Bail out! ERROR:qom/object.c:714:object_new_with_type: assertion failed: (type != NULL)
Looking at the backtraces:
Thread 1 "qemu-system-ppc" received signal SIGABRT, Aborted.
(gdb) bt
#0 0x00007ffff53877d5 in raise () at /lib64/libc.so.6
#1 0x00007ffff5370895 in abort () at /lib64/libc.so.6
#2 0x00007ffff6dc4b6c in g_assertion_message_expr.cold () at /lib64/libglib-2.0.so.0
#3 0x00007ffff6e229ff in g_assertion_message_expr () at /lib64/libglib-2.0.so.0
#4 0x0000555555a0c8f4 in object_new_with_type (type=0x0) at qom/object.c:714
#5 0x0000555555a0c9d5 in object_new (typename=0x555555c7afe4 "isa-pit") at qom/object.c:747
#6 0x0000555555a053b8 in qdev_new (name=0x555555c7afe4 "isa-pit") at hw/core/qdev.c:153
#7 0x00005555557cdd05 in isa_new (name=0x555555c7afe4 "isa-pit") at hw/isa/isa-bus.c:160
#8 0x00005555557cf518 in i8254_pit_init (bus=0x55555603d140, base=64, isa_irq=0, alt_irq=0x0) at include/hw/timer/i8254.h:54
#9 0x00005555557d12f9 in vt8231_realize (d=0x5555563d9770, errp=0x7fffffffcc28) at hw/isa/vt82c686.c:704
(gdb) bt
#0 0x00007ffff54bd7d5 in raise () at /lib64/libc.so.6
#1 0x00007ffff54a6895 in abort () at /lib64/libc.so.6
#2 0x00005555558f7796 in object_new (typename=0x555555ad4889 "isa-parallel") at qom/object.c:749
#3 object_new (typename=type0x555555ad4889 "isa-parallel") at qom/object.c:743
#4 0x00005555558f0d46 in qdev_new (name=0x555555ad4889 "isa-parallel") at hw/core/qdev.c:153
#5 0x000055555576b669 in isa_new (name=0x555555ad4889 "isa-parallel") at hw/isa/isa-bus.c:160
#6 0x000055555576bbe8 in isa_superio_realize (dev=0x555555f15910, errp=<optimized out>) at hw/isa/isa-superio.c:54
#7 0x000055555576d5ed in via_superio_realize (d=0x555555f15910, errp=0x7fffffffcb30) at hw/isa/vt82c686.c:292
#8 0x00005555558f12c1 in device_set_realized (obj=<optimized out>, ...) at hw/core/qdev.c:761
#9 0x00005555558f5066 in property_set_bool (obj=0x555555f15910, ..., errp=0x7fffffffcbb0) at qom/object.c:2262
#10 0x00005555558f7f38 in object_property_set (obj=0x555555f15910, name=0x555555b1b1e3 "realized", ...) at qom/object.c:1407
#11 0x00005555558fb2d0 in object_property_set_qobject (obj=0x555555f15910, name=0x555555b1b1e3 "realized", ...) at qom/qom-qobject.c:28
#12 0x00005555558f8525 in object_property_set_bool (obj=0x555555f15910, name=0x555555b1b1e3 "realized", ...) at qom/object.c:1477
#13 0x00005555558f18ee in qdev_realize (dev=0x555555f15910, bus=0x55555602a610, errp=<optimized out>) at hw/core/qdev.c:389
#14 0x00005555558f197f in qdev_realize_and_unref (dev=0x555555f15910, bus=0x55555602a610, errp=<optimized out>) at hw/core/qdev.c:396
#15 0x000055555576b709 in isa_realize_and_unref (errp=<optimized out>, bus=0x55555602a610, dev=0x555555f15910) at hw/isa/isa-bus.c:179
#16 isa_create_simple (bus=0x55555602a610, name=0x555555adc33b "vt8231-superio") at hw/isa/isa-bus.c:173
#17 0x000055555576d9b7 in vt8231_realize (d=0x555556186a50, errp=<optimized out>) at hw/isa/vt82c686.c:706
The "isa-pit" type (TYPE_I8254) and "isa-parallel" are missing. Add them.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210515173716.358295-12-philmd@redhat.com>
[PMD: Added "isa-parallel" later]
The VT82C686 device model misses various dependencies:
/usr/bin/ld: libcommon.fa.p/hw_isa_vt82c686.c.o: in function `vt82c686b_realize':
hw/isa/vt82c686.c:622: undefined reference to `i8259_init'
/usr/bin/ld: hw/isa/vt82c686.c:624: undefined reference to `i8257_dma_init'
/usr/bin/ld: hw/isa/vt82c686.c:627: undefined reference to `mc146818_rtc_init'
Add them.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210515173716.358295-11-philmd@redhat.com>
Looking at the MV64341 model source, there is a dependency on the
8259 interrupt controller:
523 case MV64340_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG:
524 /* FIXME: Should this be sent via the PCI bus somehow? */
525 if (s->gpp_int_level && (s->gpp_value & BIT(31))) {
526 ret = pic_read_irq(isa_pic);
527 }
528 break;
Add it to Kconfig to avoid the following build failure:
/usr/bin/ld: libcommon.fa.p/hw_pci-host_mv64361.c.o: in function `mv64361_read':
hw/pci-host/mv64361.c:526: undefined reference to `isa_pic'
/usr/bin/ld: hw/pci-host/mv64361.c:526: undefined reference to `pic_read_irq'
Fixes: dcdf98a901 ("hw/pci-host: Add emulation of Marvell MV64361 PPC system controller")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210515173716.358295-10-philmd@redhat.com>
Passing fixed-iothread=true should make iothread conflicts fatal,
whereas fixed-iothread=false should not.
Combine the second case with an error condition that is checked after
the iothread is handled, to verify that qemu does not crash if there is
such an error after changing the iothread failed.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210624083825.29224-3-mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When invoking block-export-add with some iothread and
fixed-iothread=false, and changing the node's iothread fails, the error
is supposed to be ignored.
However, it is still stored in *errp, which is wrong. If a second error
occurs, the "*errp must be NULL" assertion in error_setv() fails:
qemu-system-x86_64: ../util/error.c:59: error_setv: Assertion
`*errp == NULL' failed.
So if fixed-iothread=false, we should ignore the error by passing NULL
to bdrv_try_set_aio_context().
Fixes: f51d23c80a
("block/export: add iothread and fixed-iothread options")
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210624083825.29224-2-mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most probably this fake backing child doesn't work anyway (see notes
about it in a8a4d15c1c).
Still, since 25f78d9e2d drivers are required to set
.supports_backing if they want to call bdrv_set_backing_hd, so now
vvfat just doesn't work because of this check.
Let's finally drop this fake backing file.
Fixes: 25f78d9e2d
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210715124853.13335-1-vsementsov@virtuozzo.com>
Tested-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove the workaround introduced in commit
6ecbc6c526
"replication: Avoid blk_make_empty() on read-only child".
It is not needed anymore since s->hidden_disk is guaranteed to be
writable when secondary_do_checkpoint() runs. Because replication_start(),
_do_checkpoint() and _stop() are only called by COLO migration code
and COLO-migration activates all disks via bdrv_invalidate_cache_all()
before it calls these functions.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <d3acfad43879e9f376bffa7dd797ae74d0a7c81a.1626619393.git.lukasstraub2@web.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The replication driver needs access to the children block-nodes of
it's child so it can issue bdrv_make_empty() and bdrv_co_pwritev()
to manage the replication. However, it does this by directly copying
the BdrvChilds, which is wrong.
Fix this by properly attaching the block-nodes with
bdrv_attach_child() and requesting the required permissions.
This ultimatively fixes a potential crash in replication_co_writev(),
because it may write to s->secondary_disk if it is in state
BLOCK_REPLICATION_FAILOVER_FAILED, without requesting write
permissions first. And now the workaround in
secondary_do_checkpoint() can be removed.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <5d0539d729afb8072d0d7cde977c5066285591b4.1626619393.git.lukasstraub2@web.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In preparation for the next patch, initialize s->hidden_disk and
s->secondary_disk later and replace access to them with local variables
in the places where they aren't initialized yet.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1eb9dc179267207d9c7eccaeb30761758e32e9ab.1626619393.git.lukasstraub2@web.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
s->active_disk is bs->file. Remove it and use local variables instead.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <2534f867ea9be5b666dfce19744b7d4e2b96c976.1626619393.git.lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 7abb479c7a ("PPC: E500: Add FSL I2C controller and integrate
RTC with it") added a global dependency on the DS1338 model, instead
of a machine one (via Kconfig). This gives trouble when building
standalone machines not exposing I2C bus:
The following clauses were found for DS1338
CONFIG_DS1338=y
config DS1338 depends on I2C
Fix by selecting the DS1338 symbol in the single machine requiring
it, the E500.
Fixes: 7abb479c7a ("PPC: E500: Add FSL I2C controller and integrate RTC with it")
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210513163858.3928976-9-philmd@redhat.com>
Only the Virt and Spike machines use NUMA. Add a RISCV_NUMA Kconfig
symbol and only have these machines select it. Adapt the Meson file
to only built it if required.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210515173716.358295-8-philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Commit a8fb0a500a ("hw/char: Add Microchip PolarFire SoC MMUART
emulation") added a dependency on the SERIAL model, but forgot to
add the Kconfig selector.
Add the dependency to the MCHP_PFSOC_MMUART symbol to fix when
building the MICROCHIP_PFSOC machine stand-alone:
/usr/bin/ld: libcommon.fa.p/hw_char_mchp_pfsoc_mmuart.c.o: in function `mchp_pfsoc_mmuart_create':
hw/char/mchp_pfsoc_mmuart.c:79: undefined reference to `serial_mm_init'
Fixes: a8fb0a500a ("hw/char: Add Microchip PolarFire SoC MMUART emulation")
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210515173716.358295-7-philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Commit bfae1772c4 ("hw/arm/fsl-imx25: Wire up eSDHC controllers")
added a dependency on the TYPE_IMX_USDHC model, but forgot to add
the Kconfig selector. Fix that to solve when built stand-alone:
$ qemu-system-arm -M imx25-pdk
qemu-system-arm: missing object type 'imx-usdhc'
Aborted (core dumped)
Fixes: bfae1772c4 ("hw/arm/fsl-imx25: Wire up eSDHC controllers")
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210515173716.358295-6-philmd@redhat.com>
In commit c4f00daa5b ("imx25-pdk: create ds1338 for qtest inside
the test") we removed the DS1338 device from the i.MX25 machine
but forgot to remove it in the machine Kconfig definitions, do
it now.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210515173716.358295-5-philmd@redhat.com>
The TYPE_NPCM7XX_SMBUS device model exposes an SMBus, but
this isn't advertised with proper Kconfig symbol, leading
to an early build failure when building NPCM7XX machines
standalone:
The following clauses were found for AT24C
config AT24C depends on I2C
select AT24C if NPCM7XX
Fix by adding SMBUS to NPCM7XX.
Fixes: 94e7787939 ("hw/i2c: Implement NPCM7XX SMBus Module Single Mode")
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210515173716.358295-4-philmd@redhat.com>
The pci_ide_create_devs() function is declared i hw/ide/qdev.c:
$ git grep ide_create_drive
hw/ide/pci.c:491: ide_create_drive(d->bus + bus[i], unit[i], hd_table[i]);
hw/ide/qdev.c:127:IDEDevice *ide_create_drive(IDEBus *bus, int unit, DriveInfo *drive)
include/hw/ide/internal.h:653:IDEDevice *ide_create_drive(IDEBus *bus, int unit, DriveInfo *drive);
Fix the correct symbol dependency to avoid build failure when
deselecting some machines:
/usr/bin/ld: libcommon.fa.p/hw_ide_pci.c.o: in function `pci_ide_create_devs':
hw/ide/pci.c:491: undefined reference to `ide_create_drive'
Fixes: 8f01b41e10 ("ide: express dependencies with Kconfig")
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210515173716.358295-3-philmd@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
When building the 'microvm' machine stand-alone we get:
$ qemu-system-x86_64 -M microvm
**
ERROR:qom/object.c:714:object_new_with_type: assertion failed: (type != NULL)
Bail out! ERROR:qom/object.c:714:object_new_with_type: assertion failed: (type != NULL)
Aborted (core dumped)
Looking at the backtrace:
(gdb) bt
#3 0x00007ff2330492ff in g_assertion_message_expr () at /lib64/libglib-2.0.so.0
#4 0x000055a878c18341 in object_new_with_type (type=<optimized out>) at qom/object.c:714
#5 0x000055a878c18399 in object_new (typename=typename@entry=0x55a878dec36a "isa-pit") at qom/object.c:747
#6 0x000055a878cc8146 in qdev_new (name=name@entry=0x55a878dec36a "isa-pit") at hw/core/qdev.c:153
#7 0x000055a878a8b439 in isa_new (name=name@entry=0x55a878dec36a "isa-pit") at hw/isa/isa-bus.c:160
#8 0x000055a878adb782 in i8254_pit_init (base=64, isa_irq=0, alt_irq=0x0, bus=0x55a87ab38760) at include/hw/timer/i8254.h:54
#9 microvm_devices_init (mms=0x55a87ac36800) at hw/i386/microvm.c:263
#10 microvm_machine_state_init (machine=<optimized out>) at hw/i386/microvm.c:471
#11 0x000055a878a944ab in machine_run_board_init (machine=machine@entry=0x55a87ac36800) at hw/core/machine.c:1239
The "isa-pit" type (TYPE_I8254) is missing. Add it.
Fixes: 0ebf007dda ("hw/i386: Introduce the microvm machine type")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20210616204328.2611406-24-philmd@redhat.com>
The 'microvm' machine misses various dependencies:
/usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_setup_microvm':
hw/i386/acpi-microvm.c:247: undefined reference to `acpi_build_tables_init'
/usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_build_microvm':
hw/i386/acpi-microvm.c:192: undefined reference to `bios_linker_loader_alloc'
/usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `build_dsdt_microvm':
hw/i386/acpi-microvm.c:121: undefined reference to `init_aml_allocator'
/usr/bin/ld: hw/i386/acpi-microvm.c:124: undefined reference to `acpi_data_push'
/usr/bin/ld: hw/i386/acpi-microvm.c:126: undefined reference to `aml_scope'
/usr/bin/ld: hw/i386/acpi-microvm.c:129: undefined reference to `build_ged_aml'
/usr/bin/ld: hw/i386/acpi-microvm.c:131: undefined reference to `acpi_dsdt_add_power_button'
/usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_dsdt_add_virtio':
hw/i386/acpi-microvm.c:77: undefined reference to `aml_string'
/usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `build_dsdt_microvm':
hw/i386/acpi-microvm.c:138: undefined reference to `aml_scope'
/usr/bin/ld: hw/i386/acpi-microvm.c:149: undefined reference to `build_header'
/usr/bin/ld: hw/i386/acpi-microvm.c:152: undefined reference to `free_aml_allocator'
/usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_build_microvm':
hw/i386/acpi-microvm.c:202: undefined reference to `acpi_add_table'
/usr/bin/ld: hw/i386/acpi-microvm.c:203: undefined reference to `build_fadt'
/usr/bin/ld: hw/i386/acpi-microvm.c:206: undefined reference to `acpi_add_table'
/usr/bin/ld: hw/i386/acpi-microvm.c:207: undefined reference to `acpi_build_madt'
/usr/bin/ld: hw/i386/acpi-microvm.c:212: undefined reference to `build_xsdt'
/usr/bin/ld: hw/i386/acpi-microvm.c:224: undefined reference to `build_rsdp'
/usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_setup_microvm':
hw/i386/acpi-microvm.c:251: undefined reference to `acpi_add_rom_blob'
/usr/bin/ld: hw/i386/acpi-microvm.c:253: undefined reference to `acpi_add_rom_blob'
/usr/bin/ld: hw/i386/acpi-microvm.c:255: undefined reference to `acpi_add_rom_blob'
/usr/bin/ld: hw/i386/acpi-microvm.c:258: undefined reference to `acpi_build_tables_cleanup'
/usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_dsdt_add_pci':
hw/i386/acpi-microvm.c:105: undefined reference to `acpi_dsdt_add_gpex'
collect2: error: ld returned 1 exit status
ninja: build stopped: subcommand failed.
Update the ACPI_HW_REDUCED symbol to select ACPI_MEMORY_HOTPLUG /
ACPI_NVDIMM / ACPI.
Fixes: 8045df14bc ("microvm/acpi: add minimal acpi support")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20210616204328.2611406-23-philmd@redhat.com>
ACPI core routines (in core.c) are not really x86-specific.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20210616204328.2611406-21-philmd@redhat.com>
Boston is built around a Xilinx FPGA, which includes a PCIe root port
and an UART. An Intel EG20T PCH connects the I/O peripherals, but only
the SATA bus is emulated.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Paul Burton <pburton@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190311005618.19007-6-philmd@redhat.com>
The Inter-Thread Communication Unit (ITU, introduced in commit
34fa7e83e1) is part of the Coherent Processing System (CPS),
as describe in commit 408294352a:
Make ITU available in the system if CPU supports multithreading
and is part of CPS.
Have CPS select ITU in Kconfig to avoid the following build failure:
/usr/bin/ld: libqemu-mips64el-softmmu.fa.p/hw_mips_cps.c.o: in function `mips_cps_realize':
hw/mips/cps.c:104: undefined reference to `mips_itu_get_tag_region'
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190311005618.19007-5-philmd@redhat.com>
Currently, the block driver whitelists are only applied for the system
emulator. All other binaries still give unrestricted access to all block
drivers. There are use cases where this made sense because the main
concern was avoiding customers running VMs on less optimised block
drivers and getting bad performance. Allowing the same image format e.g.
as a target for 'qemu-img convert' is not a problem then.
However, if the concern is the supportability of the driver in general,
either in full or when used read-write, not applying the list driver
whitelist in tools doesn't help - especially since qemu-nbd and
qemu-storage-daemon now give access to more or less the same operations
in block drivers as running a system emulator.
In order to address this, introduce a new configure option that enforces
the driver whitelist in all binaries.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210709164141.254097-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's possible that requests start to wait each other in
mirror_wait_on_conflicts(). To avoid it let's use same technique as in
block/io.c in bdrv_wait_serialising_requests_locked() /
bdrv_find_conflicting_request(): don't wait on intersecting request if
it is already waiting for some other request.
For details of the dead-lock look at testIntersectingActiveIO()
test-case which we actually fixing now.
Fixes: d06107ade0
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210702211636.228981-4-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is a dead-lock in active mirror: when we have parallel
intersecting requests (note that non intersecting requests may be
considered intersecting after aligning to mirror granularity), it may
happen that request A waits request B in mirror_wait_on_conflicts() and
request B waits for A.
Look at the test for details. Test now dead-locks, that's why it's
disabled. Next commit will fix mirror and enable the test.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210702211636.228981-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This field is unused, but it very helpful for debugging.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210702211636.228981-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
First, categorize the structure fields to identify what needs
to be protected and what doesn't.
We essentially need to protect only .state, and the 3 lists in
BDRVBlkdebugState.
Then, add the lock and mark the functions accordingly.
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210614082931.24925-7-eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There seems to be no benefit in using a field. Replace it with a local
variable, and move the state update before the yields.
The state update has do be done before the yields because now using
a local variable does not allow the new updated state to be visible
by the other yields.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210614082931.24925-6-eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
That would be unsafe in case a rule other than the current one
is removed while the coroutine has yielded.
Keep FOREACH_SAFE because suspend_request deletes the current rule.
After this patch, *all* matching rules are deleted before suspending
the coroutine, rather than just one.
This doesn't affect the existing testcases.
Use actions_count to see how many yield to issue.
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210614082931.24925-5-eesposit@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
