The check on x86ms->apic_id_limit in pc_machine_done() had two problems.
Firstly, we need KVM to support the X2APIC API in order to allow IRQ
delivery to APICs >= 255. So we need to call/check kvm_enable_x2apic(),
which was done elsewhere in *some* cases but not all.
Secondly, microvm needs the same check. So move it from pc_machine_done()
to x86_cpus_init() where it will work for both.
The check in kvm_cpu_instance_init() is now redundant and can be dropped.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20220314142544.150555-1-dwmw2@infradead.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When cache_info_passthrough is requested, QEMU passes the host values
of the cache information CPUID leaves down to the guest. However,
it blindly assumes that the CPUID leaf exists on the host, and this
cannot be guaranteed: for example, KVM has recently started to
synthesize AMD leaves up to 0x80000021 in order to provide accurate
CPU bug information to guests.
Querying a nonexistent host leaf fills the output arguments of
host_cpuid with data that (albeit deterministic) is nonsensical
as cache information, namely the data in the highest Intel CPUID
leaf. If said highest leaf is not ECX-dependent, this can even
cause an infinite loop when kvm_arch_init_vcpu prepares the input
to KVM_SET_CPUID2. The infinite loop is only terminated by an
abort() when the array gets full.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We commonly define the header guard symbol without an explicit value.
Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-4-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
Capstone should be superior to the old libopcode disassembler,
so we can drop the old file nowadays.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220412165836.355850-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Support for xcr0 to be able to enable xsave/xrstor. This by itself
is not sufficient to enable xsave/xrstor. WHPX XSAVE API's also
needs to be hooked up.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <MW2PR2101MB1116F07C07A26FD7A7ED8DCFC0780@MW2PR2101MB1116.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The abs1 function in ops_sse.h only works sorrectly when the result fits
in a signed int. This is fine most of the time because we're only dealing
with byte sized values.
However pcmp_elen helper function uses abs1 to calculate the absolute value
of a cpu register. This incorrectly truncates to 32 bits, and will give
the wrong anser for the most negative value.
Fix by open coding the saturation check before taking the absolute value.
Signed-off-by: Paul Brook <paul@nowt.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity warns that 14 << data32 may overflow with respect
to the target_ulong to which it is subsequently added.
We know this wasn't true because data32 is in [1,2],
but the suggested fix is perfectly fine.
Fixes: Coverity CID 1487135, 1487256
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20220401184635.327423-1-richard.henderson@linaro.org>
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
Use the FILE* from qemu_log_trylock more often.
Support per-thread log files with -d tid.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmJgStUdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+c9Af/ZXnKe6bz5yjXy1mS
mNIBJUPKrz1RXFfJxuCfEDWrtNc/gvQyvc3weZG5X0cXpiczeWA5V/9xbE9hu5gV
4rePiIHWmOrais6GZlqEu2F8P3/XyqdPHtcdBfa1hDneixtpqMHCqnh36nQjHyiU
ogFxEJ/M9tTwhuWZrXe/JSYAiALEDYMK9bk4RUMOP1c4v37rXqUNOAM1IPhfxLL/
bK9DQMpz5oUNsWWaqBQ2wQWHkNTOpUEkKGQv0xcQF5SdpYwaxakW9B7/h4QSeOUn
oY6MFTmkJ4BPrLnkcubn+3PICc9LW0OFuzNnUdMCbeqVbjAUQrdMDalKpy4uNFv9
U1VqHg==
=Mt5s
-----END PGP SIGNATURE-----
Merge tag 'pull-log-20220420' of https://gitlab.com/rth7680/qemu into staging
Clean up log locking.
Use the FILE* from qemu_log_trylock more often.
Support per-thread log files with -d tid.
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmJgStUdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+c9Af/ZXnKe6bz5yjXy1mS
# mNIBJUPKrz1RXFfJxuCfEDWrtNc/gvQyvc3weZG5X0cXpiczeWA5V/9xbE9hu5gV
# 4rePiIHWmOrais6GZlqEu2F8P3/XyqdPHtcdBfa1hDneixtpqMHCqnh36nQjHyiU
# ogFxEJ/M9tTwhuWZrXe/JSYAiALEDYMK9bk4RUMOP1c4v37rXqUNOAM1IPhfxLL/
# bK9DQMpz5oUNsWWaqBQ2wQWHkNTOpUEkKGQv0xcQF5SdpYwaxakW9B7/h4QSeOUn
# oY6MFTmkJ4BPrLnkcubn+3PICc9LW0OFuzNnUdMCbeqVbjAUQrdMDalKpy4uNFv9
# U1VqHg==
# =Mt5s
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Apr 2022 11:03:01 AM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-log-20220420' of https://gitlab.com/rth7680/qemu: (39 commits)
util/log: Support per-thread log files
util/log: Limit RCUCloseFILE to file closing
util/log: Rename QemuLogFile to RCUCloseFILE
util/log: Combine two logfile closes
util/log: Hoist the eval of is_daemonized in qemu_set_log_internal
util/log: Rename qemu_logfile_mutex to global_mutex
util/log: Rename qemu_logfile to global_file
util/log: Rename logfilename to global_filename
util/log: Remove qemu_log_close
softmmu: Use qemu_set_log_filename_flags
linux-user: Use qemu_set_log_filename_flags
bsd-user: Use qemu_set_log_filename_flags
util/log: Introduce qemu_set_log_filename_flags
sysemu/os-win32: Test for and use _lock_file/_unlock_file
include/qemu/log: Move entire implementation out-of-line
include/exec/log: Do not reference QemuLogFile directly
tests/unit: Do not reference QemuLogFile directly
linux-user: Expand log_page_dump inline
bsd-user: Expand log_page_dump inline
util/log: Drop call to setvbuf
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have fetched and locked the logfile in translator_loop.
Pass the filepointer down to the disas_log hook so that it
need not be fetched and locked again.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>
Inside qemu_log, we perform qemu_log_trylock/unlock, which need
not be done if we have already performed the lock beforehand.
Always check the result of qemu_log_trylock -- only checking
qemu_loglevel_mask races with the acquisition of the lock on
the logfile.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-10-richard.henderson@linaro.org>
This function can fail, which makes it more like ftrylockfile
or pthread_mutex_trylock than flockfile or pthread_mutex_lock,
so rename it.
To closer match the other trylock functions, release rcu_read_lock
along the failure path, so that qemu_log_unlock need not be called
on failure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-8-richard.henderson@linaro.org>
During the conversion to the gdb_get_reg128 helpers the high and low
parts of the XMM register where inadvertently swapped. This causes
reads of the register to report the incorrect value to gdb.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/971
Fixes: b7b8756a9c (target/i386: use gdb_get_reg helpers)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: qemu-stable@nongnu.org
Message-Id: <20220419091020.3008144-25-alex.bennee@linaro.org>
In commit b7711471f5 in 2014 we refactored the handling of the x86
vector registers so that instead of separate structs XMMReg, YMMReg
and ZMMReg for representing the 16-byte, 32-byte and 64-byte width
vector registers and multiple fields in the CPU state, we have a
single type (XMMReg, later renamed to ZMMReg) and a single struct
field (xmm_regs). However, in 2017 in commit c97d6d2cdf some of
the old struct types and CPU state fields got added back, when we
merged in the hvf support (which had developed in a separate fork
that had presumably not had the refactoring of b7711471f5), as part
of code handling xsave. Commit f585195ec0 then almost immediately
dropped that xsave code again in favour of sharing the xsave handling
with KVM, but forgot to remove the now unused CPU state fields and
struct types.
Delete the unused types and CPUState fields.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220412110047.1497190-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The i386 target consolidates all vector registers so that instead of
XMMReg, YMMReg and ZMMReg structs there is a single ZMMReg that can
fit all of SSE, AVX and AVX512.
When TCG copies data from and to the SSE registers, it uses the
full 64-byte width. This is not a correctness issue because TCG
never lets guest code see beyond the first 128 bits of the ZMM
registers, however it causes uninitialized stack memory to
make it to the CPU's migration stream.
Fix it by only copying the low 16 bytes of the ZMMReg union into
the destination register.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220216102500.692781-5-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SynDbg commands can come from two different flows:
1. Hypercalls, in this mode the data being sent is fully
encapsulated network packets.
2. SynDbg specific MSRs, in this mode only the data that needs to be
transfered is passed.
Signed-off-by: Jon Doron <arilou@gmail.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220216102500.692781-4-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add all required definitions for hyperv synthetic debugger interface.
Signed-off-by: Jon Doron <arilou@gmail.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220216102500.692781-3-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Below is the updated version of the patch adding debugging support to WHPX.
It incorporates feedback from Alex Bennée and Peter Maydell regarding not
changing the emulation logic depending on the gdb connection status.
Instead of checking for an active gdb connection to determine whether QEMU
should intercept the INT1 exceptions, it now checks whether any breakpoints
have been set, or whether gdb has explicitly requested one or more CPUs to
do single-stepping. Having none of these condition present now has the same
effect as not using gdb at all.
Message-Id: <0e7f01d82e9e$00e9c360$02bd4a20$@sysprogs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The types are no longer used in bswap.h since commit
f930224fff ("bswap.h: Remove unused float-access functions"), there
isn't much sense in keeping it there and having a dependency on fpu/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-29-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.
This avoids the need for a constructor initialization too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new field 'cpu0-id' to the response of query-sev-capabilities QMP
command. The value of the field is the base64-encoded unique ID of CPU0
(socket 0), which can be used to retrieve the signed CEK of the CPU from
AMD's Key Distribution Service (KDS).
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220228093014.882288-1-dovmurik@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some versions of Windows hang on reboot if their TSC value is greater
than 2^54. The calibration of the Hyper-V reference time overflows
and fails; as a result the processors' clock sources are out of sync.
The issue is that the TSC _should_ be reset to 0 on CPU reset and
QEMU tries to do that. However, KVM special cases writing 0 to the
TSC and thinks that QEMU is trying to hot-plug a CPU, which is
correct the first time through but not later. Thwart this valiant
effort and reset the TSC to 1 instead, but only if the CPU has been
run once.
For this to work, env->tsc has to be moved to the part of CPUArchState
that is not zeroed at the beginning of x86_cpu_reset.
Reported-by: Vadim Rozenfeld <vrozenfe@redhat.com>
Supersedes: <20220324082346.72180-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
High bits in the immediate operand of SSE comparisons are ignored, they
do not result in an undefined opcode exception. This is mentioned
explicitly in the Intel documentation.
Reported-by: sonicadvance1@gmail.com
Closes: https://gitlab.com/qemu-project/qemu/-/issues/184
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some AMD processors expose the PKRU extended save state even if they do not have
the related PKU feature in CPUID. Worse, when they do they report a size of
64, whereas the expected size of the PKRU extended save state is 8, therefore
the esa->size == eax assertion does not hold.
The state is already ignored by KVM_GET_SUPPORTED_CPUID because it
was not enabled in the host XCR0. However, QEMU kvm_cpu_xsave_init()
runs before QEMU invokes arch_prctl() to enable dynamically-enabled
save states such as XTILEDATA, and KVM_GET_SUPPORTED_CPUID hides save
states that have yet to be enabled. Therefore, kvm_cpu_xsave_init()
needs to consult the host CPUID instead of KVM_GET_SUPPORTED_CPUID,
and dies with an assertion failure.
When setting up the ExtSaveArea array to match the host, ignore features that
KVM does not report as supported. This will cause QEMU to skip the incorrect
CPUID leaf instead of tripping the assertion.
Closes: https://gitlab.com/qemu-project/qemu/-/issues/916
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Analyzed-by: Yang Zhong <yang.zhong@intel.com>
Reported-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the physical machine environment, when a SRAR error occurs,
the IA32_MCG_STATUS RIPV bit is set, but qemu does not set this
bit. When qemu injects an SRAR error into virtual machine, the
virtual machine kernel just call do_machine_check() to kill the
current task, but not call memory_failure() to isolate the faulty
page, which will cause the faulty page to be allocated and used
repeatedly. If used by the virtual machine kernel, it will cause
the virtual machine to crash
Signed-off-by: luofei <luofei@unicloud.com>
Message-Id: <20220120084634.131450-1-luofei@unicloud.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix vCPU hot-unplug related leak reported by Valgrind:
==132362== 4,096 bytes in 1 blocks are definitely lost in loss record 8,440 of 8,549
==132362== at 0x4C3B15F: memalign (vg_replace_malloc.c:1265)
==132362== by 0x4C3B288: posix_memalign (vg_replace_malloc.c:1429)
==132362== by 0xB41195: qemu_try_memalign (memalign.c:53)
==132362== by 0xB41204: qemu_memalign (memalign.c:73)
==132362== by 0x7131CB: kvm_init_xsave (kvm.c:1601)
==132362== by 0x7148ED: kvm_arch_init_vcpu (kvm.c:2031)
==132362== by 0x91D224: kvm_init_vcpu (kvm-all.c:516)
==132362== by 0x9242C9: kvm_vcpu_thread_fn (kvm-accel-ops.c:40)
==132362== by 0xB2EB26: qemu_thread_start (qemu-thread-posix.c:556)
==132362== by 0x7EB2159: start_thread (in /usr/lib64/libpthread-2.28.so)
==132362== by 0x9D45DD2: clone (in /usr/lib64/libc-2.28.so)
Reported-by: Mark Kanda <mark.kanda@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Mark Kanda <mark.kanda@oracle.com>
Message-Id: <20220322120522.26200-1-philippe.mathieu.daude@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The instruction description says "It is loaded without rounding
errors." which implies we should have the widest rounding mode
possible.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/888
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220315121251.2280317-4-alex.bennee@linaro.org>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220315144156.1595462-4-armbru@redhat.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
KVM support for AMX includes a new system attribute, KVM_X86_XCOMP_GUEST_SUPP.
Commit 19db68ca68 ("x86: Grant AMX permission for guest", 2022-03-15) however
did not fully consider the behavior on older kernels. First, it warns
too aggressively. Second, it invokes the KVM_GET_DEVICE_ATTR ioctl
unconditionally and then uses the "bitmask" variable, which remains
uninitialized if the ioctl fails. Third, kvm_ioctl returns -errno rather
than -1 on errors.
While at it, explain why the ioctl is needed and KVM_GET_SUPPORTED_CPUID
is not enough.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Remove various build warnings
- Fix building with modules on macOS
- Fix mouse/keyboard GUI interactions
-----BEGIN PGP SIGNATURE-----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=PLdU
-----END PGP SIGNATURE-----
Merge tag 'darwin-20220315' of https://github.com/philmd/qemu into staging
Darwin-based host patches
- Remove various build warnings
- Fix building with modules on macOS
- Fix mouse/keyboard GUI interactions
# gpg: Signature made Tue 15 Mar 2022 12:52:19 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'darwin-20220315' of https://github.com/philmd/qemu: (21 commits)
MAINTAINERS: Volunteer to maintain Darwin-based hosts support
ui/cocoa: add option to swap Option and Command
ui/cocoa: capture all keys and combos when mouse is grabbed
ui/cocoa: release mouse when user switches away from QEMU window
ui/cocoa: add option to disable left-command forwarding to guest
ui/cocoa: Constify qkeycode translation arrays
configure: Pass filtered QEMU_OBJCFLAGS to meson
meson: Log QEMU_CXXFLAGS content in summary
meson: Resolve the entitlement.sh script once for good
osdep: Avoid using Clang-specific __builtin_available()
audio: Rename coreaudio extension to use Objective-C compiler
coreaudio: Always return 0 in handle_voice_change
audio: Log context for audio bug
audio/dbus: Fix building with modules on macOS
audio/coreaudio: Remove a deprecation warning on macOS 12
block/file-posix: Remove a deprecation warning on macOS 12
hvf: Remove deprecated hv_vcpu_flush() calls
hvf: Make hvf_get_segments() / hvf_put_segments() local
hvf: Use standard CR0 and CR4 register definitions
tests/fp/berkeley-testfloat-3: Ignore ignored #pragma directives
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When building on macOS 11 [*], we get:
In file included from ../target/i386/hvf/hvf.c:59:
../target/i386/hvf/vmx.h:174:5: error: 'hv_vcpu_flush' is deprecated: first deprecated in macOS 11.0 - This API has no effect and always returns HV_UNSUPPORTED [-Werror,-Wdeprecated-declarations]
hv_vcpu_flush(vcpu);
^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/System/Library/Frameworks/Hypervisor.framework/Headers/hv.h:364:20: note: 'hv_vcpu_flush' has been explicitly marked deprecated here
extern hv_return_t hv_vcpu_flush(hv_vcpuid_t vcpu)
^
Since this call "has no effect", simply remove it ¯\_(ツ)_/¯
Not very useful deprecation doc:
https://developer.apple.com/documentation/hypervisor/1441386-hv_vcpu_flush
[*] Also 10.15 (Catalina):
https://lore.kernel.org/qemu-devel/Yd3DmSqZ1SiJwd7P@roolebo.dev/
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Both hvf_get_segments/hvf_put_segments() functions are only
used within x86hvf.c: do not declare them as public API.
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
No need to have our own definitions of these registers.
Signed-off-by: Cameron Esfahani <dirty@apple.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Even when the feature is not supported in guest CPUID,
still set the msr to the default value which will
be the only value KVM will accept in this case
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220223115824.319821-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows 11 with WSL2 enabled (Hyper-V) fails to boot with Icelake-Server
{-v5} CPU model but boots well with '-cpu host'. Apparently, it expects
5-level paging and 5-level EPT support to come in pair but QEMU's
Icelake-Server CPU model lacks the later. Introduce 'Icelake-Server-v6'
CPU model with 'vmx-page-walk-5' enabled by default.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220221145316.576138-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
XFD(eXtended Feature Disable) allows to enable a
feature on xsave state while preventing specific
user threads from using the feature.
Support save and restore XFD MSRs if CPUID.D.1.EAX[4]
enumerate to be valid. Likewise migrate the MSRs and
related xsave state necessarily.
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220217060434.52460-8-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When dynamic xfeatures (e.g. AMX) are used by the guest, the xsave
area would be larger than 4KB. KVM_GET_XSAVE2 and KVM_SET_XSAVE
under KVM_CAP_XSAVE2 works with a xsave buffer larger than 4KB.
Always use the new ioctls under KVM_CAP_XSAVE2 when KVM supports it.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220217060434.52460-7-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add AMX primary feature bits XFD and AMX_TILE to
enumerate the CPU's AMX capability. Meanwhile, add
AMX TILE and TMUL CPUID leaf and subleaves which
exist when AMX TILE is present to provide the maximum
capability of TILE and TMUL.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220217060434.52460-6-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel introduces XFD faulting mechanism for extended
XSAVE features to dynamically enable the features in
runtime. If CPUID (EAX=0Dh, ECX=n, n>1).ECX[2] is set
as 1, it indicates support for XFD faulting of this
state component.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220217060434.52460-5-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Kernel allocates 4K xstate buffer by default. For XSAVE features
which require large state component (e.g. AMX), Linux kernel
dynamically expands the xstate buffer only after the process has
acquired the necessary permissions. Those are called dynamically-
enabled XSAVE features (or dynamic xfeatures).
There are separate permissions for native tasks and guests.
Qemu should request the guest permissions for dynamic xfeatures
which will be exposed to the guest. This only needs to be done
once before the first vcpu is created.
KVM implemented one new ARCH_GET_XCOMP_SUPP system attribute API to
get host side supported_xcr0 and Qemu can decide if it can request
dynamically enabled XSAVE features permission.
https://lore.kernel.org/all/20220126152210.3044876-1-pbonzini@redhat.com/
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Message-Id: <20220217060434.52460-4-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The AMX TILECFG register and the TMMx tile data registers are
saved/restored via XSAVE, respectively in state component 17
(64 bytes) and state component 18 (8192 bytes).
Add AMX feature bits to x86_ext_save_areas array to set
up AMX components. Add structs that define the layout of
AMX XSAVE areas and use QEMU_BUILD_BUG_ON to validate the
structs sizes.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220217060434.52460-3-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The extended state subleaves (EAX=0Dh, ECX=n, n>1).ECX[1]
indicate whether the extended state component locates
on the next 64-byte boundary following the preceding state
component when the compacted format of an XSAVE area is
used.
Right now, they are all zero because no supported component
needed the bit to be set, but the upcoming AMX feature will
use it. Fix the subleaves value according to KVM's supported
cpuid.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220217060434.52460-2-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Loading a non-canonical address into rsp when handling an interrupt or
performing a far call should raise a #SS not a #GP.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/870
Signed-off-by: Gareth Webb <gareth.webb@umbralsoftware.co.uk>
Message-Id: <164529651121.25406.15337137068584246397-0@git.sr.ht>
[Move get_pg_mode to seg_helper.c for user-mode emulators. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
LA57/PKE/PKS is only relevant in 64-bit mode, and NXE is only relevant if
PAE is in use. Since there is code that checks PG_MODE_LA57 to determine
the canonicality of addresses, make sure that the bit is not set by
mistake in 32-bit mode. While it would not be a problem because 32-bit
addresses by definition fit in both 48-bit and 57-bit address spaces,
it is nicer if get_pg_mode() actually returns whether a feature is enabled,
and it allows a few simplifications in the page table walker.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
