Valid description taken from qemu-img.texi, although it would be better
to have this information recorded in only one place.
Signed-off-by: Pierre Riteau <Pierre.Riteau@irisa.fr>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I haven't heard yet of anyone using qemu-img to copy an image to a real floppy,
but it's a valid use case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The old options are still supported for compatibility, but they are
inconsistent (for example create -b vs. convert -B for backing files) and
incomplete (-F only exists for create) which tends to confuse people. Remove
all references to the old options from the documentation to guide users to the
more consistent -o options.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A size of 0 should be valid and cannot be treated as "missing value". Use -1
for this purpose instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch increases the maximum qcow2 cluster size to 2 MB. Starting with 128k
clusters, L2 tables span 2 GB or more of virtual disk space, causing 32 bit
truncation and wraparound of signed integers. Therefore some variables need to
use a larger data type.
While being at reviewing data types, change some integers that are used for
array indices to unsigned. In some places they were checked against some upper
limit but not for negative values. This could avoid potential segfaults with
corrupted qcow2 images.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make 'qemu-img convert' copies unallocated parts of the source image
when -B option was not specified.
Signed-off-by: Akkarit Sangpetch <asangpet@andrew.cmu.edu>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use hxtool to generate the 'command syntax' section of qemu-img's help
message, and the corresponding section of the texinfo documentation.
This has the side-effect of adding 'check' to this list of commands in
the texinfo documentation.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Update the documentation to reflect the introduction of format specific options
with -o. Don't advertise -e or -6 any more, they exist only for compatibility
reasons and can be replaced by the corresponding -o options.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a small help text to each of the options in the block drivers
which can be displayed by using qemu-img create -f fmt -o ?
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is part two of the qemu-img conversion. This really works the same as the
previous conversion of qemu-img create: It introduces a new -o option for the
generic approach and adds the old-style options to this option set.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch changes qemu-img to actually use the new bdrv_create interface. It
translates the old-style qemu-img options which have been bdrv_create2
parameters or flags so far to option structures. As the generic approach, it
introduces an -o option which accepts any parameter the driver knows.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now we can make use of the newly introduced option structures. Instead of
having bdrv_create carry more and more parameters (which are format specific in
most cases), just pass a option structure as defined by the driver itself.
bdrv_create2() contains an emulation of the old interface to simplify the
transition.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Include assert.h from qemu-common.h and remove other direct uses.
cpu-all.h still need to include it because of the dyngen-exec.h hacks
Signed-off-by: Paul Brook <paul@codesourcery.com>
From: Kevin Wolf <kwolf@redhat.com>
Now that block drivers can provide check functions, expose them through
qemu-img.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7215 c046a42c-6fe2-441c-8c8c-71466251a162
The algorithm from the VHD specification for CHS calculation silently limits
images to 127 GB which may confuse a user who requested a larger image. Better
output an error message and abort.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7109 c046a42c-6fe2-441c-8c8c-71466251a162
This patch allows the use a host_device as the destination for "qemu-img
convert".
I added a ->bdrv_create function host_device. It merely verifies that
the device exists and is large enough.
A check is needed in the qemu-img convert loop to ensure that we write
out all 0 sectors to the host_device. Otherwise they end up with stale
garbage where all zero sectors were expected.
I also made the check against bdrv_is_allocated enabled for everything
_except_ host devices, since there is no point in making the block
backend write a bunch of zeros just so that we can memcmp them
immediately afterwards. Host devices can't benefit from this because
there is no way to differentiate between a sector being unallocated
because it was never written, or because it was written with all zeros
and then made a trip through qemu-img convert.
Finally, there is an unrelated fix for a typo in the error message
printed if the destination device does not support ->bdrv_create.
Signed-off-by: Nolan Leake <nolan <at> sigbus.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6978 c046a42c-6fe2-441c-8c8c-71466251a162
If the user specifies the backing file format,
then when opening the backing file, there is no need
to probe the (backing file) image to figure out its format.
This follows my previous patches implementing bdrv_create2
which keeps (for qcow2 only) the backing file format
as a qcow2-extension
Suggested by Daniel P. Berrange.
Signed-off-by: Uri Lublin <uril@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6910 c046a42c-6fe2-441c-8c8c-71466251a162
This series is broken by design as it requires expensive IO operations at
open time causing very long delays when starting a virtual machine for the
first time.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6812 c046a42c-6fe2-441c-8c8c-71466251a162
We want to globally define WIN_LEAN_AND_MEAN and WINVER to particular values so
let's do it in OS_CFLAGS.
Then, we can pepper in windows.h includes where using #includes that require it.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6783 c046a42c-6fe2-441c-8c8c-71466251a162
Rearrange code, help printout and docs so that they are in the same
(hopefully more logical) order for easier maintenance.
Add help and docs for undocumented options.
Reformat slightly for more consistent help output.
Add comments to encourage better synchronization in the future.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6432 c046a42c-6fe2-441c-8c8c-71466251a162
getopt doesn't return a char but an int.
Signed-off-by: Kevin Wolf <kwolf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6331 c046a42c-6fe2-441c-8c8c-71466251a162
Introduce noreturn attribute and attach it to cpu_loop_exit as well as
interrupt/exception helpers for i386. This avoids a bunch of gcc4
warnings.
[ Note that this patch comes with a workaround to include qemu-common.h
even in cases where is currently causes conflicts with dyngen-exec.h.
I've been told that these conflicts will get resolved in the future
(/me will try to have a look as well - as time permits). ]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6303 c046a42c-6fe2-441c-8c8c-71466251a162
Add snapshot subcommand to qemu-img which allows to list, create, apply
and delete snapshots on qcow2 images.
Signed-off-by: Kevin Wolf <kwolf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6215 c046a42c-6fe2-441c-8c8c-71466251a162
Data integrity is not important in qemu-img, so open the files with
cache=writeback. This fixes the performance regression seen with qemu-img
since revision 5485, and most particularly with the qcow2 format.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5839 c046a42c-6fe2-441c-8c8c-71466251a162
it.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4978 c046a42c-6fe2-441c-8c8c-71466251a162
This patch modify qemu-img to ask and set a password when an encrypted
disk image is created.
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4977 c046a42c-6fe2-441c-8c8c-71466251a162
Remove QEMU_TOOL. Replace with QEMU_IMG and NEED_CPU_H.
Avoid linking qemu-img against whole system emulatior.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3578 c046a42c-6fe2-441c-8c8c-71466251a162
