The vhdx driver uses truncation for image growth, with a special case
for blocks that already read as zero but which are only being
partially written. But with a bit of rearranging, it's just as easy
to defer the decision on whether truncation resulted in zeroes to the
actual allocation attempt, reducing the number of places that still
use bdrv_has_zero_init_truncate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428202905.770727-9-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The parallels driver tries to use truncation for image growth, but can
only do so when reads are guaranteed as zero. Now that we have a way
to request zero contents from truncation, we can defer the decision to
actual allocation attempts rather than up front, reducing the number
of places that still use bdrv_has_zero_init_truncate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428202905.770727-8-eblake@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Our .bdrv_has_zero_init_truncate can detect when the remote side
always zero fills; we can reuse that same knowledge to implement
BDRV_REQ_ZERO_WRITE by ignoring it when the server gives it to us for
free.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428202905.770727-7-eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Our .bdrv_has_zero_init_truncate always returns 1 because sheepdog
always 0-fills; we can use that same knowledge to implement
BDRV_REQ_ZERO_WRITE by ignoring it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428202905.770727-6-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Our .bdrv_has_zero_init_truncate always returns 1 because rbd always
0-fills; we can use that same knowledge to implement
BDRV_REQ_ZERO_WRITE by ignoring it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428202905.770727-5-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Our .bdrv_has_zero_init_truncate returns 1 if we detect that the OS
always 0-fills; we can use that same knowledge to implement
BDRV_REQ_ZERO_WRITE by ignoring it when the OS gives it to us for
free.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428202905.770727-4-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When using bdrv_file, .bdrv_has_zero_init_truncate always returns 1;
therefore, we can behave just like file-posix, and always implement
BDRV_REQ_ZERO_WRITE by ignoring it since the OS gives it to us for
free (note that file-posix.c had to use an 'if' because it shared code
between regular files and block devices, but in file-win32.c,
bdrv_host_device uses a separate .bdrv_file_open).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428202905.770727-3-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block.c already defaults to 0 if we don't provide a callback; there's
no need to write a callback that always fails.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200428202905.770727-2-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Calling bdrv_getlength() to get the pre-truncate file size will not
really work on block devices, because they have always the same length,
and trying to write beyond it will fail with a rather cryptic error
message.
Instead, we should use qcow2_get_last_cluster() and bdrv_getlength()
only as a fallback.
Before this patch:
$ truncate -s 1G test.img
$ sudo losetup -f --show test.img
/dev/loop0
$ sudo qemu-img create -f qcow2 -o preallocation=full /dev/loop0 64M
Formatting '/dev/loop0', fmt=qcow2 size=67108864 cluster_size=65536
preallocation=full lazy_refcounts=off refcount_bits=16
qemu-img: /dev/loop0: Could not resize image: Failed to resize refcount
structures: No space left on device
With this patch:
$ sudo qemu-img create -f qcow2 -o preallocation=full /dev/loop0 64M
Formatting '/dev/loop0', fmt=qcow2 size=67108864 cluster_size=65536
preallocation=full lazy_refcounts=off refcount_bits=16
qemu-img: /dev/loop0: Could not resize image: Failed to resize
underlying file: Preallocation mode 'full' unsupported for this
non-regular file
So as you can see, it still fails, but now the problem is missing
support on the block device level, so we at least get a better error
message.
Note that we cannot preallocate block devices on truncate by design,
because we do not know what area to preallocate. Their length is always
the same, the truncate operation does not change it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200505141801.1096763-1-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since the introduction of a backup filter node in commit 00e30f05d, the
backup block job crashes when the target image is smaller than the
source image because it will try to write after the end of the target
node without having BLK_PERM_RESIZE. (Previously, the BlockBackend layer
would have caught this and errored out gracefully.)
We can fix this and even do better than the old behaviour: Check that
source and target have the same image size at the start of the block job
and unshare BLK_PERM_RESIZE. (This permission was already unshared
before the same commit 00e30f05d, but the BlockBackend that was used to
make the restriction was removed without a replacement.) This will
immediately error out when starting the job instead of only when writing
to a block that doesn't exist in the target.
Longer target than source would technically work because we would never
write to blocks that don't exist, but semantically these are invalid,
too, because a backup is supposed to create a copy, not just an image
that starts with a copy.
Fixes: 00e30f05de
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1778593
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430142755.315494-4-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_get_device_name() will be an empty string with modern management
tools that don't use -drive. Use bdrv_get_device_or_node_name() instead
so that the node name is used if the BlockBackend is anonymous.
While at it, start with upper case to make the message consistent with
the rest of the function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200430142755.315494-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we have a backup L2 table, we currently flush once after writing to
the active L2 table and again after writing to the backup table. A
single flush is enough and makes things a little less slow.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430133007.170335-6-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a cluster is already zeroed, we don't have to call vmdk_L2update(),
which is rather slow because it flushes the image file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430133007.170335-5-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When overwriting a zero cluster, we must not perform copy-on-write from
the backing file, but from a zeroed buffer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430133007.170335-4-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
m_data must contain valid data even for zero clusters when no cluster
was allocated in the image file. Without this, zero writes segfault with
images that have zeroed_grain=on.
For zero writes, we don't want to allocate a cluster in the image file
even in compressed files.
Fixes: 524089bce4
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430133007.170335-3-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
m_data is used for zero clusters even though valid == 0. It really only
means that a new cluster was allocated in the image file. Rename it to
reflect this.
While at it, change it from int to bool, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430133007.170335-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After commit f01643fb8b when an image is
extended and BDRV_REQ_ZERO_WRITE is set then the new clusters are
zeroized.
The code however does not detect correctly situations when the old and
the new end of the image are within the same cluster. The problem can
be reproduced with these steps:
qemu-img create -f qcow2 backing.qcow2 1M
qemu-img create -f qcow2 -F qcow2 -b backing.qcow2 top.qcow2
qemu-img resize --shrink top.qcow2 520k
qemu-img resize top.qcow2 567k
In the last step offset - zero_start causes an integer wraparound.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200504155217.10325-1-berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently if you attampt to create too large file with luks you
get the following error message:
Formatting 'test.luks', fmt=luks size=17592186044416 key-secret=sec0
qemu-img: test.luks: Could not resize file: File too large
While for raw format the error message is
qemu-img: test.img: The image size is too large for file format 'raw'
The reason for this is that qemu-img checks for errono of the failure,
and presents the later error when it is -EFBIG
However crypto generic code 'swallows' the errno and replaces it
with -EIO.
As an attempt to make it better, we can make luks driver,
detect -EFBIG and in this case present a better error message,
which is what this patch does
The new error message is:
qemu-img: error creating test.luks: The requested file size is too large
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1534898
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
- reduce client-side fragmentation of NBD trim and status requests
- fix iotest 41 when run in deep tree
- fix socket activation in qemu-nbd
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAl6whTUACgkQp6FrSiUn
Q2r4nAf7BtGSFMkUu6nWYeq+Ggg+Xwmz2FLAzWTK/rccGDC44c9ETzOIbWEddo6X
FHpU07VXdLW1h2M7ox8lQVo0DZEFxTRBYTPtUtjB7izfkAs4CkYeElJsZAPAZKgU
GsKqa3RM6uXubsQaXXXjMFCGlYgqi1dVkmkgtPebt7evSe0ATlTfYfd0y9gb5f9C
cbHD3CVcGKQe4ZtNcSBpTzOvXJSrBZznyCyhBO2qmVXTynt/5Ygog+Ulq3DHZsPX
UkRkTPohKA0BhXuS7wD49danlzCLiTlvswr62fAncM1+AJTbmIa+apy3SwiOkwMh
Aawq5vDtaFV+HEBKbMC0QRhgtoEe1w==
=ExlI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2020-05-04' into staging
nbd patches for 2020-05-04
- reduce client-side fragmentation of NBD trim and status requests
- fix iotest 41 when run in deep tree
- fix socket activation in qemu-nbd
# gpg: Signature made Mon 04 May 2020 22:12:21 BST
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2020-05-04:
block/nbd-client: drop max_block restriction from discard
block/nbd-client: drop max_block restriction from block_status
iotests/041: Fix NBD socket path
tools: Fix use of fcntl(F_SETFD) during socket activation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes
-----BEGIN PGP SIGNATURE-----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=ibgH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.1-pull-request' into staging
trivial patches (20200504)
Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes
# gpg: Signature made Mon 04 May 2020 16:45:18 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-for-5.1-pull-request:
hw/timer/pxa2xx_timer: Add assertion to silent static analyzer warning
hw/timer/stm32f2xx_timer: Remove dead assignment
hw/gpio/aspeed_gpio: Remove dead assignment
hw/isa/i82378: Remove dead assignment
hw/ide/sii3112: Remove dead assignment
hw/input/adb-kbd: Remove dead assignment
hw/i2c/pm_smbus: Remove dead assignment
blockdev: Remove dead assignment
block: Avoid dead assignment
Compress lines for immediate return
chardev: Add macOS to list of OSes that support -chardev serial
MAINTAINERS: Update Keith Busch's email address
elf_ops: Don't try to g_mapped_file_unref(NULL)
hw/mem/pc-dimm: Fix line over 80 characters warning
hw/mem/pc-dimm: Print slot number on error at pc_dimm_pre_plug()
MAINTAINERS: Mark the LatticeMico32 target as orphan
timer/exynos4210_mct: Remove redundant statement in exynos4210_mct_write()
display/blizzard: use extract16() for fix clang analyzer warning in blizzard_draw_line16_32()
scsi/esp-pci: add g_assert() for fix clang analyzer warning in esp_pci_io_write()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Run block_copy iterations in parallel in aio tasks.
Changes:
- BlockCopyTask becomes aio task structure. Add zeroes field to pass
it to block_copy_do_copy
- add call state - it's a state of one call of block_copy(), shared
between parallel tasks. For now used only to keep information about
first error: is it read or not.
- convert block_copy_dirty_clusters to aio-task loop.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200429130847.28124-6-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of just relying on the comment "Called only on full-dirty
region" in block_copy_task_create() let's move initial dirty area
search directly to block_copy_task_create(). Let's also use effective
bdrv_dirty_bitmap_next_dirty_area instead of looping through all
non-dirty clusters.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200429130847.28124-5-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are going to use aio-task-pool API, so we'll need state pointer in
BlockCopyTask anyway. Add it now and use where possible.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200429130847.28124-4-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are going to use aio-task-pool API, so tasks will be handled in
parallel. We need therefore separate allocated task on each iteration.
Introduce this logic now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200429130847.28124-3-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are going to use aio-task-pool API and extend in-flight request
structure to be a successor of AioTask, so rename things appropriately.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200429130847.28124-2-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It's been a while since we got rid of the sector-based bdrv_read and
bdrv_write (commit 2e11d756); let's finish the job on a few remaining
comments.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428213807.776655-1-eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Our comment did not actually match the code. Rewrite the comment to
be less sensitive to any future changes to qcow2-bitmap.c that might
implement scenarios that we currently reject.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200428192648.749066-4-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We originally refused to allow resize of images with internal
snapshots because the v2 image format did not require the tracking of
snapshot size, making it impossible to safely revert to a snapshot
with a different size than the current view of the image. But the
snapshot size tracking was rectified in v3, and our recent fixes to
qemu-img amend (see 0a85af35) guarantee that we always have a valid
snapshot size. Thus, we no longer need to artificially limit image
resizes, but it does become one more thing that would prevent a
downgrade back to v2. And now that we support different-sized
snapshots, it's also easy to fix reverting to a snapshot to apply the
new size.
Upgrade iotest 61 to cover this (we previously had NO coverage of
refusal to resize while snapshots exist). Note that the amend process
can fail but still have effects: in particular, since we break things
into upgrade, resize, downgrade, a failure during resize does not roll
back changes made during upgrade, nor does failure in downgrade roll
back a resize. But this situation is pre-existing even without this
patch; and without journaling, the best we could do is minimize the
chance of partial failure by collecting all changes prior to doing any
writes - which adds a lot of complexity but could still fail with EIO.
On the other hand, we are careful that even if we have partial
modification but then fail, the image is left viable (that is, we are
careful to sequence things so that after each successful cluster
write, there may be transient leaked clusters but no corrupt
metadata). And complicating the code to make it more transaction-like
is not worth the effort: a user can always request multiple 'qemu-img
amend' changing one thing each, if they need finer-grained control
over detecting the first failure than what they get by letting qemu
decide how to sequence multiple changes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200428192648.749066-3-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There are several callers that need to create a new block backend from
an existing BDS; make the task slightly easier with a common helper
routine.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424190903.522087-2-eblake@redhat.com>
[mreitz: Set @ret only in error paths, see
https://lists.nongnu.org/archive/html/qemu-block/2020-04/msg01216.html]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200428192648.749066-2-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The NBD spec was updated (see nbd.git commit 9f30fedb) so that
max_block doesn't relate to NBD_CMD_TRIM. So, drop the restriction.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200401150112.9557-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: tweak commit message to call out NBD commit]
Signed-off-by: Eric Blake <eblake@redhat.com>
The NBD spec was updated (see nbd.git commit 9f30fedb) so that
max_block doesn't relate to NBD_CMD_BLOCK_STATUS. So, drop the
restriction.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200401150112.9557-2-vsementsov@virtuozzo.com>
[eblake: tweak commit message to call out NBD commit]
Signed-off-by: Eric Blake <eblake@redhat.com>
- ran regexp "qemu_mutex_lock\(.*\).*\n.*if" to find targets
- replaced result with QEMU_LOCK_GUARD if all unlocks at function end
- replaced result with WITH_QEMU_LOCK_GUARD if unlock not at end
Signed-off-by: Daniel Brodsky <dnbrdsky@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20200404042108.389635-3-dnbrdsky@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Compress two lines into a single line if immediate return statement is found.
It also remove variables progress, val, data, ret and sock
as they are no longer needed.
Remove space between function "mixer_load" and '(' to fix the
checkpatch.pl error:-
ERROR: space prohibited between function name and open parenthesis '('
Done using following coccinelle script:
@@
local idexpression ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Simran Singhal <singhalsimran0@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200401165314.GA3213@simran-Inspiron-5558>
[lv: in handle_aiocb_write_zeroes_unmap() move "int ret" inside the #ifdef]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The BDRV_REQ_ZERO_WRITE is currently implemented in a way that first the
image is possibly preallocated and then the zero flag is added to all
clusters. This means that a copy-on-write operation may be needed when
writing to these clusters, despite having used preallocation, negating
one of the major benefits of preallocation.
Instead, try to forward the BDRV_REQ_ZERO_WRITE to the protocol driver,
and if the protocol driver can ensure that the new area reads as zeros,
we can skip setting the zero flag in the qcow2 layer.
Unfortunately, the same approach doesn't work for metadata
preallocation, so we'll still set the zero flag there.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424142701.67053-1-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When extending the size of an image that has a backing file larger than
its old size, make sure that the backing file data doesn't become
visible in the guest, but the added area is properly zeroed out.
Consider the following scenario where the overlay is shorter than its
backing file:
base.qcow2: AAAAAAAA
overlay.qcow2: BBBB
When resizing (extending) overlay.qcow2, the new blocks should not stay
unallocated and make the additional As from base.qcow2 visible like
before this patch, but zeros should be read.
A similar case happens with the various variants of a commit job when an
intermediate file is short (- for unallocated):
base.qcow2: A-A-AAAA
mid.qcow2: BB-B
top.qcow2: C--C--C-
After commit top.qcow2 to mid.qcow2, the following happens:
mid.qcow2: CB-C00C0 (correct result)
mid.qcow2: CB-C--C- (before this fix)
Without the fix, blocks that previously read as zeros on top.qcow2
suddenly turn into A.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200424125448.63318-8-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For regular files, we always get BDRV_REQ_ZERO_WRITE behaviour from the
OS, so we can advertise the flag and just ignore it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-7-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The raw format driver can simply forward the flag and let its bs->file
child take care of actually providing the zeros.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200424125448.63318-6-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If BDRV_REQ_ZERO_WRITE is set and we're extending the image, calling
qcow2_cluster_zeroize() with flags=0 does the right thing: It doesn't
undo any previous preallocation, but just adds the zero flag to all
relevant L2 entries. If an external data file is in use, a write_zeroes
request to the data file is made instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200424125448.63318-5-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that node level interface bdrv_truncate() supports passing request
flags to the block driver, expose this on the BlockBackend level, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that block drivers can support flags for .bdrv_co_truncate, expose
the parameter in the node level interfaces bdrv_co_truncate() and
bdrv_truncate().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a new BdrvRequestFlags parameter to the .bdrv_co_truncate()
driver callbacks, and a supported_truncate_flags field in
BlockDriverState that allows drivers to advertise support for request
flags in the context of truncate.
For now, we always pass 0 and no drivers declare support for any flag.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The previous few commits have made this more obvious, and removed the
one exception. Time to clarify the documentation, and drop dead error
checking.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-13-armbru@redhat.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
check_cache_dropped() calls error_setg() in a loop. It fails to break
the loop in one instance. If a subsequent iteration error_setg()s
again, it trips error_setv()'s assertion.
Fix it to break the loop.
Fixes: 31be8a2a97
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200422130719.28225-3-armbru@redhat.com>
Fixes the following coccinelle warnings:
$ spatch --sp-file --verbose-parsing ... \
scripts/coccinelle/remove_local_err.cocci
...
SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5213
SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5261
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:166
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:167
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:169
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:170
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:171
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:172
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:173
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5787
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5789
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5800
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5801
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5802
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5804
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5805
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5806
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:6329
SUSPICIOUS: a \ character appears outside of a #define at ./hw/sd/sdhci.c:1133
SUSPICIOUS: a \ character appears outside of a #define at ./hw/scsi/scsi-disk.c:3081
SUSPICIOUS: a \ character appears outside of a #define at ./hw/net/virtio-net.c:1529
SUSPICIOUS: a \ character appears outside of a #define at ./hw/riscv/sifive_u.c:468
SUSPICIOUS: a \ character appears outside of a #define at ./dump/dump.c:1895
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2209
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2215
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2221
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2222
SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:172
SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:173
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200412223619.11284-2-f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
There is an overflow, the source 'datain.data[2]' is 100 bytes,
but the 'ss' is 252 bytes.This may cause a security issue because
we can access a lot of unrelated memory data.
The len for sbp copy data should take the minimum of mx_sb_len and
sb_len_wr, not the maximum.
If we use iscsi device for VM backend storage, ASAN show stack:
READ of size 252 at 0xfffd149dcfc4 thread T0
#0 0xaaad433d0d34 in __asan_memcpy (aarch64-softmmu/qemu-system-aarch64+0x2cb0d34)
#1 0xaaad45f9d6d0 in iscsi_aio_ioctl_cb /qemu/block/iscsi.c:996:9
#2 0xfffd1af0e2dc (/usr/lib64/iscsi/libiscsi.so.8+0xe2dc)
#3 0xfffd1af0d174 (/usr/lib64/iscsi/libiscsi.so.8+0xd174)
#4 0xfffd1af19fac (/usr/lib64/iscsi/libiscsi.so.8+0x19fac)
#5 0xaaad45f9acc8 in iscsi_process_read /qemu/block/iscsi.c:403:5
#6 0xaaad4623733c in aio_dispatch_handler /qemu/util/aio-posix.c:467:9
#7 0xaaad4622f350 in aio_dispatch_handlers /qemu/util/aio-posix.c:510:20
#8 0xaaad4622f350 in aio_dispatch /qemu/util/aio-posix.c:520
#9 0xaaad46215944 in aio_ctx_dispatch /qemu/util/async.c:298:5
#10 0xfffd1bed12f4 in g_main_context_dispatch (/lib64/libglib-2.0.so.0+0x512f4)
#11 0xaaad46227de0 in glib_pollfds_poll /qemu/util/main-loop.c:219:9
#12 0xaaad46227de0 in os_host_main_loop_wait /qemu/util/main-loop.c:242
#13 0xaaad46227de0 in main_loop_wait /qemu/util/main-loop.c:518
#14 0xaaad43d9d60c in qemu_main_loop /qemu/softmmu/vl.c:1662:9
#15 0xaaad4607a5b0 in main /qemu/softmmu/main.c:49:5
#16 0xfffd1a460b9c in __libc_start_main (/lib64/libc.so.6+0x20b9c)
#17 0xaaad43320740 in _start (aarch64-softmmu/qemu-system-aarch64+0x2c00740)
0xfffd149dcfc4 is located 0 bytes to the right of 100-byte region [0xfffd149dcf60,0xfffd149dcfc4)
allocated by thread T0 here:
#0 0xaaad433d1e70 in __interceptor_malloc (aarch64-softmmu/qemu-system-aarch64+0x2cb1e70)
#1 0xfffd1af0e254 (/usr/lib64/iscsi/libiscsi.so.8+0xe254)
#2 0xfffd1af0d174 (/usr/lib64/iscsi/libiscsi.so.8+0xd174)
#3 0xfffd1af19fac (/usr/lib64/iscsi/libiscsi.so.8+0x19fac)
#4 0xaaad45f9acc8 in iscsi_process_read /qemu/block/iscsi.c:403:5
#5 0xaaad4623733c in aio_dispatch_handler /qemu/util/aio-posix.c:467:9
#6 0xaaad4622f350 in aio_dispatch_handlers /qemu/util/aio-posix.c:510:20
#7 0xaaad4622f350 in aio_dispatch /qemu/util/aio-posix.c:520
#8 0xaaad46215944 in aio_ctx_dispatch /qemu/util/async.c:298:5
#9 0xfffd1bed12f4 in g_main_context_dispatch (/lib64/libglib-2.0.so.0+0x512f4)
#10 0xaaad46227de0 in glib_pollfds_poll /qemu/util/main-loop.c:219:9
#11 0xaaad46227de0 in os_host_main_loop_wait /qemu/util/main-loop.c:242
#12 0xaaad46227de0 in main_loop_wait /qemu/util/main-loop.c:518
#13 0xaaad43d9d60c in qemu_main_loop /qemu/softmmu/vl.c:1662:9
#14 0xaaad4607a5b0 in main /qemu/softmmu/main.c:49:5
#15 0xfffd1a460b9c in __libc_start_main (/lib64/libc.so.6+0x20b9c)
#16 0xaaad43320740 in _start (aarch64-softmmu/qemu-system-aarch64+0x2c00740)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200418062602.10776-1-kuhn.chenqun@huawei.com
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Fix crashes and hangs related to iothreads, bdrv_drain and block jobs:
- Fix some AIO context locking in jobs
- Fix blk->in_flight during blk_wait_while_drained()
- vpc: Don't round up already aligned BAT sizes
-----BEGIN PGP SIGNATURE-----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=oODf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Fix crashes and hangs related to iothreads, bdrv_drain and block jobs:
- Fix some AIO context locking in jobs
- Fix blk->in_flight during blk_wait_while_drained()
- vpc: Don't round up already aligned BAT sizes
# gpg: Signature made Tue 07 Apr 2020 15:25:24 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
vpc: Don't round up already aligned BAT sizes
block: Fix blk->in_flight during blk_wait_while_drained()
block: Increase BB.in_flight for coroutine and sync interfaces
block-backend: Reorder flush/pdiscard function definitions
backup: don't acquire aio_context in backup_clean
replication: assert we own context before job_cancel_sync
job: take each job's lock individually in job_txn_apply
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As reported on Launchpad, Azure apparently doesn't accept images for
upload that are not both aligned to 1 MB blocks and have a BAT size that
matches the image size exactly.
As far as I can tell, there is no real reason why we create a BAT that
is one entry longer than necessary for aligned image sizes, so change
that.
(Even though the condition is only mentioned as "should" in the spec and
previous products accepted larger BATs - but we'll try to maintain
compatibility with as many of Microsoft's ever-changing interpretations
of the VHD spec as possible.)
Fixes: https://bugs.launchpad.net/bugs/1870098
Reported-by: Tobias Witek
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200402093603.2369-1-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Waiting in blk_wait_while_drained() while blk->in_flight is increased
for the current request is wrong because it will cause the drain
operation to deadlock.
This patch makes sure that blk_wait_while_drained() is called with
blk->in_flight increased exactly once for the current request, and that
it temporarily decreases the counter while it waits.
Fixes: cf3129323f
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200407121259.21350-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
External callers of blk_co_*() and of the synchronous blk_*() functions
don't currently increase the BlockBackend.in_flight counter, but calls
from blk_aio_*() do, so there is an inconsistency whether the counter
has been increased or not.
This patch moves the actual operations to static functions that can
later know they will always be called with in_flight increased exactly
once, even for external callers using the blk_co_*() coroutine
interfaces.
If the public blk_co_*() interface is unused, remove it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200407121259.21350-3-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
