We still need two different helpers, since NEON and SVE2 get the
inputs from different locations within the source vector. However,
we can convert both to the same internal form for computation.
The sve2 helper is not used yet, but adding it with this patch
helps illustrate why the neon changes are helpful.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200216214232.4230-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The gvec form will be needed for implementing SVE2.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200216214232.4230-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The gvec form will be needed for implementing SVE2.
Extend the implementation to operate on uint64_t instead of uint32_t.
Use a counted inner loop instead of terminating when op1 goes to zero,
looking toward the required implementation for ARMv8.4-DIT.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200216214232.4230-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These instructions shift left or right depending on the sign
of the input, and 7 bits are significant to the shift. This
requires several masks and selects in addition to the actual
shifts to form the complete answer.
That said, the operation is still a small improvement even for
two 64-bit elements -- 13 vector operations instead of 2 * 7
integer operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200216214232.4230-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Writes to AdvSIMD registers flush the bits above 128.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214194643.23317-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Writes to AdvSIMD registers flush the bits above 128.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214194643.23317-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Writes to AdvSIMD registers flush the bits above 128.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214194643.23317-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200208125816.14954-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For aarch64, there's a dedicated msr (imm, reg) insn.
For aarch32, this is done via msr to cpsr. Writes from el0
are ignored, which is already handled by the CPSR_USER mask.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200208125816.14954-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To implement PAN, we will want to swap, for short periods
of time, to a different privileged mmu_idx. In addition,
we cannot do this with flushing alone, because the AT*
instructions have both PAN and PAN-less versions.
Add the ARMMMUIdx*_PAN constants where necessary next to
the corresponding ARMMMUIdx* constant.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200208125816.14954-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The EL2&0 translation regime is affected by Load Register (unpriv).
The code structure used here will facilitate later changes in this
area for implementing UAO and NV.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200206105448.4726-36-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a predicate to indicate whether the regime has
both positive and negative addresses.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200206105448.4726-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is part of a reorganization to the set of mmu_idx.
This emphasizes that they apply to the Secure EL1&0 regime.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200206105448.4726-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The EL1&0 regime is the only one that uses 2-stage translation.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200206105448.4726-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is part of a reorganization to the set of mmu_idx.
This emphasizes that they apply to the EL1&0 regime.
The ultimate goal is
-- Non-secure regimes:
ARMMMUIdx_E10_0,
ARMMMUIdx_E20_0,
ARMMMUIdx_E10_1,
ARMMMUIdx_E2,
ARMMMUIdx_E20_2,
-- Secure regimes:
ARMMMUIdx_SE10_0,
ARMMMUIdx_SE10_1,
ARMMMUIdx_SE3,
-- Helper mmu_idx for non-secure EL1&0 stage1 and stage2
ARMMMUIdx_Stage2,
ARMMMUIdx_Stage1_E0,
ARMMMUIdx_Stage1_E1,
The 'S' prefix is reserved for "Secure". Unless otherwise specified,
each mmu_idx represents all stages of translation.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200206105448.4726-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When support for the AHP flag was added we inexplicably only freed the
new temps in one of the two legs. Move those tcg_temp_free to the same
level as the allocation to fix that leak.
Fixes: 486624fcd3
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200131153439.26027-1-alex.bennee@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We currently search both the root and the tcg/ directories for tcg
files:
$ git grep '#include "tcg/' | wc -l
28
$ git grep '#include "tcg[^/]' | wc -l
94
To simplify the preprocessor search path, unify by expliciting the
tcg/ directory.
Patch created mechanically by running:
$ for x in \
tcg.h tcg-mo.h tcg-op.h tcg-opc.h \
tcg-op-gvec.h tcg-gvec-desc.h; do \
sed -i "s,#include \"$x\",#include \"tcg/$x\"," \
$(git grep -l "#include \"$x\""); \
done
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-2-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Before we introduce blocking semihosting calls we need to ensure we
can restart the system on semi hosting exception. To be able to do
this the EXCP_SEMIHOST operation should be idempotent until it finally
completes. Practically this means ensureing we only update the pc
after the semihosting call has completed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Keith Packard <keithp@keithp.com>
Fixes:
target/arm/translate-a64.c: In function 'disas_crypto_three_reg_sha512':
target/arm/translate-a64.c:13625:9: error: 'genfn' may be used uninitialized in this function [-Werror=maybe-uninitialized]
genfn(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
qemu/target/arm/translate-a64.c:13609:8: error: 'feature' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (!feature) {
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200108023915.52288-1-pannengyuan@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Continue setting, but not relying upon, env->hflags.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reorganize watchpoints out of i/o path.
Return host address from probe_write / probe_access.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAl1uiyYdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8AuwgAnYLQQbL8kjSqzp7q
gRlj0M2SX41ZW3fMkI794RwsljD9Z0QS7YGnpzHolig9XUYrGnip7STrMvlCr/1L
CIMWNHlgitgBMszLqg42/TB+6RxXn+DMX/ShUzTagC6xQhinCIpdEjoLaTKSgeP+
foIyJ2uoJLKOBP8cPTQp8evongtoQIljpsZZ0K8a4sreO1d6ytH+olkuoGiROft+
VoJkA+kNHd9cE+LPCva8UFGu1QE6uCySvhepzOpnvOtK+SXKUm2yLOFGu7RWP1pT
RkE0oRyRnImtg+cViHfUUFogIffFROdL5tuYMQVuqbINeROPUgJPav+R1Nz1P60a
xM2HEw==
=bLLU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190903' into staging
Allow page table bit to swap endianness.
Reorganize watchpoints out of i/o path.
Return host address from probe_write / probe_access.
# gpg: Signature made Tue 03 Sep 2019 16:47:50 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20190903: (36 commits)
tcg: Factor out probe_write() logic into probe_access()
tcg: Make probe_write() return a pointer to the host page
s390x/tcg: Pass a size to probe_write() in do_csst()
hppa/tcg: Call probe_write() also for CONFIG_USER_ONLY
mips/tcg: Call probe_write() for CONFIG_USER_ONLY as well
tcg: Enforce single page access in probe_write()
tcg: Factor out CONFIG_USER_ONLY probe_write() from s390x code
s390x/tcg: Fix length calculation in probe_write_access()
s390x/tcg: Use guest_addr_valid() instead of h2g_valid() in probe_write_access()
tcg: Check for watchpoints in probe_write()
cputlb: Handle watchpoints via TLB_WATCHPOINT
cputlb: Remove double-alignment in store_helper
cputlb: Fix size operand for tlb_fill on unaligned store
exec: Factor out cpu_watchpoint_address_matches
cputlb: Fold TLB_RECHECK into TLB_INVALID_MASK
exec: Factor out core logic of check_watchpoint()
exec: Move user-only watchpoint stubs inline
target/sparc: sun4u Invert Endian TTE bit
target/sparc: Add TLB entry with attributes
cputlb: Byte swap memory transaction attribute
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Preparation for collapsing the two byte swaps, adjust_endianness and
handle_bswap, along the I/O path.
Target dependant attributes are conditionalized upon NEED_CPU_H.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <81d9cd7d7f5aaadfa772d6c48ecee834e9cf7882.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently the only part of an ARMCPRegInfo which is allowed to cause
a CPU exception is the access function, which returns a value indicating
that some flavour of UNDEF should be generated.
For the ATS system instructions, we would like to conditionally
generate exceptions as part of the writefn, because some faults
during the page table walk (like external aborts) should cause
an exception to be raised rather than returning a value.
There are several ways we could do this:
* plumb the GETPC() value from the top level set_cp_reg/get_cp_reg
helper functions through into the readfn and writefn hooks
* add extra readfn_with_ra/writefn_with_ra hooks that take the GETPC()
value
* require the ATS instructions to provide a dummy accessfn,
which serves no purpose except to cause the code generation
to emit TCG ops to sync the CPU state
* add an ARM_CP_ flag to mark the ARMCPRegInfo as possibly
throwing an exception in its read/write hooks, and make the
codegen sync the CPU state before calling the hooks if the
flag is set
This patch opts for the last of these, as it is fairly simple
to implement and doesn't require invasive changes like updating
the readfn/writefn hook function prototype signature.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20190816125802.25877-2-peter.maydell@linaro.org
This reverts commit 3cb3663715.
Despite the fact that the text for the call to gen_exception_insn
is identical for aarch64 and aarch32, the implementation inside
gen_exception_insn is totally different.
This fixes exceptions raised from aarch64.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20190826151536.6771-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Prior patch resets can_do_io flag at the TB entry. Therefore there is no
need in resetting this flag at the end of the block.
This patch removes redundant gen_io_end calls.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <156404429499.18669.13404064982854123855.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@gmail.com>
Promote this function from aarch64 to fully general use.
Use it to unify the code sequences for generating illegal
opcode exceptions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190807045335.1361-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unlike the other more generic gen_exception{,_internal}_insn
interfaces, breakpoints always refer to the current instruction.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190807045335.1361-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The offset is variable depending on the instruction set.
Passing in the actual value is clearer in intent.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190807045335.1361-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The offset is variable depending on the instruction set, whereas
we have stored values for the current pc and the next pc. Passing
in the actual value is clearer in intent.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190807045335.1361-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We must update s->base.pc_next when we return from the translate_insn
hook to the main translator loop. By incrementing s->base.pc_next
immediately after reading the insn word, "pc_next" contains the address
of the next instruction throughout translation.
All remaining uses of s->pc are referencing the address of the next insn,
so this is now a simple global replacement. Remove the "s->pc" field.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190807045335.1361-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a new field to retain the address of the instruction currently
being translated. The 32-bit uses are all within subroutines used
by a32 and t32. This will become less obvious when t16 support is
merged with a32+t32, and having a clear definition will help.
Convert aarch64 as well for consistency. Note that there is one
instance of a pre-assert fprintf that used the wrong value for the
address of the current instruction.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190807045335.1361-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When generating an architectural single-step exception we were
routing it to the "default exception level", which is to say
the same exception level we execute at except that EL0 exceptions
go to EL1. This is incorrect because the debug exception level
can be configured by the guest for situations such as single
stepping of EL0 and EL1 code by EL2.
We have to track the target debug exception level in the TB
flags, because it is dependent on CPU state like HCR_EL2.TGE
and MDCR_EL2.TDE. (That we were previously calling the
arm_debug_target_el() function to determine dc->ss_same_el
is itself a bug, though one that would only have manifested
as incorrect syndrome information.) Since we are out of TB
flag bits unless we want to expand into the cs_base field,
we share some bits with the M-profile only HANDLER and
STACKCHECK bits, since only A-profile has this singlestep.
Fixes: https://bugs.launchpad.net/qemu/+bug/1838913
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190805130952.4415-3-peter.maydell@linaro.org
Factor out code to 'generate a singlestep exception', which is
currently repeated in four places.
To do this we need to also pull the identical copies of the
gen-exception() function out of translate-a64.c and translate.c
into translate.h.
(There is a bug in the code: we're taking the exception to the wrong
target EL. This will be simpler to fix if there's only one place to
do it.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190805130952.4415-2-peter.maydell@linaro.org
Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-11-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want to use vfp_expand_imm() in the AArch32 VFP decode;
move it from the a64-only header/source file to the
AArch32 one (which is always compiled even for AArch64).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-2-peter.maydell@linaro.org
This replaces 3 target-specific implementations for BIT, BIF, and BSL.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190518191934.21887-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace arm_env_get_cpu with env_archcpu. The combination
CPU(arm_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move all softmmu tlb data into this structure. Arrange the
members so that we are able to place mask+table together and
at a smaller absolute offset from ENV.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for having some more common semihosting code let's
excise the current config magic from vl.c into its own file. We shall
later add more conditionals to the build configurations so we can
avoid building this if we don't need it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The mask implied by the extract is redundant with the one
implied by the deposit. Also, fix spelling of BFXIL.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190514011129.11330-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is, after all, how we implement extract2 in tcg/aarch64.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190514011129.11330-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it. Most callers pass fprintf() and stderr.
log_cpu_state() passes fprintf() and qemu_log_file.
hmp_info_registers() passes monitor_fprintf() and the current monitor
cast to FILE *. monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf().
The callback gets passed around a lot, which is tiresome. The
type-punning around monitor_fprintf() is ugly.
Drop the callback, and call qemu_fprintf() instead. Also gets rid of
the type-punning, since qemu_fprintf() takes NULL instead of the
current monitor cast to FILE *.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-15-armbru@redhat.com>
The second word has been loaded from the unincremented
address since the first commit.
Fixes: 44ac14b06f
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190322234302.12770-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will allow sharing code that adjusts rmode beyond
the existing users.
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-10-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
