Now that gen_icount_io_start() is a simple wrapper to
translator_io_start(), inline it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230602095439.48102-1-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The following commits changed the code such that the fallback to MFSS for MFFSCRN,
MFFSCRNI, MFFSCE and MFFSL on pre 3.0 ISAs was removed and became an illegal instruction:
bf8adfd88b - target/ppc: Move mffscrn[i] to decodetree
394c2e2fda - target/ppc: Move mffsce to decodetree
3e5bce70ef - target/ppc: Move mffsl to decodetree
The hardware will handle them as a MFFS instruction as the code did previously.
This means applications that were segfaulting under qemu when encountering these
instructions which is used in glibc libm functions for example.
The fallback for MFFSCDRN and MFFSCDRNI added in a later patch was also missing.
This patch restores the fallback to MFSS for these instructions on pre 3.0s ISAs
as the hardware decoder would, fixing the segfaulting libm code. It doesn't have
the fallback for 3.0 onwards to match hardware behaviour.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reviewed-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230510111913.1718734-1-richard.purdie@linuxfoundation.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
No need to roll our own, as this is now provided by tcg.
This was the last use of retxl, so remove that too.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In function do_extractm() the mask is calculated as
dup_const(1 << (element_width - 1)). '1' being signed int
works fine for MO_8,16,32. For MO_64, on PPC64 host
this ends up becoming 0 on compilation. The vextractdm
uses MO_64, and it ends up having mask as 0.
Explicitly use 1ULL instead of signed int 1 like its
used everywhere else.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1536
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Lucas Mateus Castro <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <168319292809.1159309.5817546227121323288.stgit@ltc-boston1.aus.stglabs.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Compute all carry bits in parallel instead of a loop.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses are strictly read-only.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All remaining uses are strictly read-only.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Initialize a new temp instead of tcg_const_*.
Fix a pasto in a comment.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All remaining uses are strictly read-only.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Compute both partial results separately and accumulate
at the end, instead of accumulating in the middle.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the body out of this large macro.
Use tcg_constant_i64.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since tcg_temp_new is now identical, use that.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Used gvec to translate XVTSTDCSP and XVTSTDCDP.
xvtstdcsp:
rept loop imm master version prev version current version
25 4000 0 0,206200 0,040730 (-80.2%) 0,040740 (-80.2%)
25 4000 1 0,205120 0,053650 (-73.8%) 0,053510 (-73.9%)
25 4000 3 0,206160 0,058630 (-71.6%) 0,058570 (-71.6%)
25 4000 51 0,217110 0,191490 (-11.8%) 0,192320 (-11.4%)
25 4000 127 0,206160 0,191490 (-7.1%) 0,192640 (-6.6%)
8000 12 0 1,234719 0,418833 (-66.1%) 0,386365 (-68.7%)
8000 12 1 1,232417 1,435979 (+16.5%) 1,462792 (+18.7%)
8000 12 3 1,232760 1,766073 (+43.3%) 1,743990 (+41.5%)
8000 12 51 1,239281 1,319562 (+6.5%) 1,423479 (+14.9%)
8000 12 127 1,231708 1,315760 (+6.8%) 1,426667 (+15.8%)
xvtstdcdp:
rept loop imm master version prev version current version
25 4000 0 0,159930 0,040830 (-74.5%) 0,040610 (-74.6%)
25 4000 1 0,160640 0,053670 (-66.6%) 0,053480 (-66.7%)
25 4000 3 0,160020 0,063030 (-60.6%) 0,062960 (-60.7%)
25 4000 51 0,160410 0,128620 (-19.8%) 0,127470 (-20.5%)
25 4000 127 0,160330 0,127670 (-20.4%) 0,128690 (-19.7%)
8000 12 0 1,190365 0,422146 (-64.5%) 0,388417 (-67.4%)
8000 12 1 1,191292 1,445312 (+21.3%) 1,428698 (+19.9%)
8000 12 3 1,188687 1,980656 (+66.6%) 1,975354 (+66.2%)
8000 12 51 1,191250 1,264500 (+6.1%) 1,355083 (+13.8%)
8000 12 127 1,197313 1,266729 (+5.8%) 1,349156 (+12.7%)
Overall, these instructions are the hardest ones to measure performance
as the gvec implementation is affected by the immediate. Above there are
5 different scenarios when it comes to immediate and 2 when it comes to
rept/loop combination. The immediates scenarios are: all bits are 0
therefore the target register should just be changed to 0, with 1 bit
set, with 2 bits set in a combination the new implementation can deal
with using gvec, 4 bits set and the new implementation can't deal with
it using gvec and all bits set. The rept/loop scenarios are high loop
and low rept (so it should spend more time executing it than translating
it) and high rept low loop (so it should spend more time translating it
than executing this code).
These comparisons are between the upstream version, a previous similar
implementation and a one with a cleaner code(this one).
For a comparison with o previous different implementation:
<20221010191356.83659-13-lucas.araujo@eldorado.org.br>
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221019125040.48028-13-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Moved XSTSTDCSP, XSTSTDCDP and XSTSTDCQP to decodetree and moved some of
its decoding away from the helper as previously the DCMX, XB and BF were
calculated in the helper with the help of cpu_env, now that part was
moved to the decodetree with the rest.
xvtstdcsp:
rept loop master patch
8 12500 1,85393600 1,94683600 (+5.0%)
25 4000 1,78779800 1,92479000 (+7.7%)
100 1000 2,12775000 2,28895500 (+7.6%)
500 200 2,99655300 3,23102900 (+7.8%)
2500 40 6,89082200 7,44827500 (+8.1%)
8000 12 17,50585500 18,95152100 (+8.3%)
xvtstdcdp:
rept loop master patch
8 12500 1,39043100 1,33539800 (-4.0%)
25 4000 1,35731800 1,37347800 (+1.2%)
100 1000 1,51514800 1,56053000 (+3.0%)
500 200 2,21014400 2,47906000 (+12.2%)
2500 40 5,39488200 6,68766700 (+24.0%)
8000 12 13,98623900 18,17661900 (+30.0%)
xvtstdcdp:
rept loop master patch
8 12500 1,35123800 1,34455800 (-0.5%)
25 4000 1,36441200 1,36759600 (+0.2%)
100 1000 1,49763500 1,54138400 (+2.9%)
500 200 2,19020200 2,46196400 (+12.4%)
2500 40 5,39265700 6,68147900 (+23.9%)
8000 12 14,04163600 18,19669600 (+29.6%)
As some values are now decoded outside the helper and passed to it as an
argument the number of arguments of the helper increased, the number
of TCGop needed to load the arguments increased. I suspect that's why
the slow-down in the tests with a high REPT but low LOOP.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221019125040.48028-12-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Moved XVTSTDCSP and XVTSTDCDP to decodetree an restructured the helper
to be simpler and do all decoding in the decodetree (so XB, XT and DCMX
are all calculated outside the helper).
Obs: The tests in this one are slightly different, these are the sum of
these instructions with all possible immediate and those instructions
are repeated 10 times.
xvtstdcsp:
rept loop master patch
8 12500 2,76402100 2,70699100 (-2.1%)
25 4000 2,64867100 2,67884100 (+1.1%)
100 1000 2,73806300 2,78701000 (+1.8%)
500 200 3,44666500 3,61027600 (+4.7%)
2500 40 5,85790200 6,47475500 (+10.5%)
8000 12 15,22102100 17,46062900 (+14.7%)
xvtstdcdp:
rept loop master patch
8 12500 2,11818000 1,61065300 (-24.0%)
25 4000 2,04573400 1,60132200 (-21.7%)
100 1000 2,13834100 1,69988100 (-20.5%)
500 200 2,73977000 2,48631700 (-9.3%)
2500 40 5,05067000 5,25914100 (+4.1%)
8000 12 14,60507800 15,93704900 (+9.1%)
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221019125040.48028-11-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Moved VPRTYBW and VPRTYBD to use gvec and both of them and VPRTYBQ to
decodetree. VPRTYBW and VPRTYBD now also use .fni4 and .fni8,
respectively.
vprtybw:
rept loop master patch
8 12500 0,01198900 0,00703100 (-41.4%)
25 4000 0,01070100 0,00571400 (-46.6%)
100 1000 0,01123300 0,00678200 (-39.6%)
500 200 0,01601500 0,01535600 (-4.1%)
2500 40 0,03872900 0,05562100 (43.6%)
8000 12 0,10047000 0,16643000 (65.7%)
vprtybd:
rept loop master patch
8 12500 0,00757700 0,00788100 (4.0%)
25 4000 0,00652500 0,00669600 (2.6%)
100 1000 0,00714400 0,00825400 (15.5%)
500 200 0,01211000 0,01903700 (57.2%)
2500 40 0,03483800 0,07021200 (101.5%)
8000 12 0,09591800 0,21036200 (119.3%)
vprtybq:
rept loop master patch
8 12500 0,00675600 0,00667200 (-1.2%)
25 4000 0,00619400 0,00643200 (3.8%)
100 1000 0,00707100 0,00751100 (6.2%)
500 200 0,01199300 0,01342000 (11.9%)
2500 40 0,03490900 0,04092900 (17.2%)
8000 12 0,09588200 0,11465100 (19.6%)
I wasn't expecting such a performance lost in both VPRTYBD and VPRTYBQ,
I'm not sure if it's worth to move those instructions. Comparing the
assembly of the helper with the TCGop they are pretty similar, so
I'm not sure why vprtybd took so much more time.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221019125040.48028-6-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch moves VADDCUW and VSUBCUW to decodtree with gvec using an
implementation based on the helper, with the main difference being
changing the -1 (aka all bits set to 1) result returned by cmp when
true to +1. It also implemented a .fni4 version of those instructions
and dropped the helper.
vaddcuw:
rept loop master patch
8 12500 0,01008200 0,00612400 (-39.3%)
25 4000 0,01091500 0,00471600 (-56.8%)
100 1000 0,01332500 0,00593700 (-55.4%)
500 200 0,01998500 0,01275700 (-36.2%)
2500 40 0,04704300 0,04364300 (-7.2%)
8000 12 0,10748200 0,11241000 (+4.6%)
vsubcuw:
rept loop master patch
8 12500 0,01226200 0,00571600 (-53.4%)
25 4000 0,01493500 0,00462100 (-69.1%)
100 1000 0,01522700 0,00455100 (-70.1%)
500 200 0,02384600 0,01133500 (-52.5%)
2500 40 0,04935200 0,03178100 (-35.6%)
8000 12 0,09039900 0,09440600 (+4.4%)
Overall there was a gain in performance, but the TCGop code was still
slightly bigger in the new version (it went from 4 to 5).
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221019125040.48028-4-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch moves VMLADDUHM to decodetree a creates a gvec implementation
using mul_vec and add_vec.
rept loop master patch
8 12500 0,01810500 0,00903100 (-50.1%)
25 4000 0,01739400 0,00747700 (-57.0%)
100 1000 0,01843600 0,00901400 (-51.1%)
500 200 0,02574600 0,01971000 (-23.4%)
2500 40 0,05921600 0,07121800 (+20.3%)
8000 12 0,15326700 0,21725200 (+41.7%)
The significant difference in performance when REPT is low and LOOP is
high I think is due to the fact that the new implementation has a higher
translation time, as when using a helper only 5 TCGop are used but with
the patch a total of 10 TCGop are needed (Power lacks a direct mul_vec
equivalent so this instruction is implemented with the help of 5 others,
vmuleu, vmulou, vmrgh, vmrgl and vpkum).
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221019125040.48028-2-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Vector instructions in general are not supposed to change the FI bit.
However, xvcmp* instructions are calling gen_helper_float_check_status,
which is leading to a cleared FI flag where it should be kept
unchanged.
As helper_float_check_status only affects inexact, overflow and
underflow, and the xvcmp* instructions don't change these flags, this
issue can be fixed by removing the call to helper_float_check_status.
By doing this, the FI bit in FPSCR will be preserved as expected.
Fixes: 00084a25ad ("target/ppc: introduce separate VSX_CMP macro for xvcmp* instructions")
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221005121551.27957-1-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These two helpers are almost identical, differing only by the softfloat
operation it calls. Merge them into one using a macro.
Also, take this opportunity to capitalize the helper name as we moved
the instruction to decodetree in a previous patch.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220905123746.54659-4-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implementation for instructions hashstp and hashchkp, the privileged
versions of hashst and hashchk, which were added in Power ISA 3.1B.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Lucas Mateus Castro <lucas.araujo@eldorado.org.br>
Message-Id: <20220715205439.161110-4-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implementation for instructions hashst and hashchk, which were added
in Power ISA 3.1B.
It was decided to implement the hash algorithm from ground up in this
patch exactly as described in Power ISA.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Lucas Mateus Castro <lucas.araujo@eldorado.org.br>
Message-Id: <20220715205439.161110-3-victor.colombo@eldorado.org.br>
[danielhb: fix block comment in excp_helper.c]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Equivalent to CHK_SV and CHK_HV, but can be used in decodetree methods.
Reviewed-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Lucas Coutinho <lucas.coutinho@eldorado.org.br>
Message-Id: <20220701133507.740619-3-lucas.coutinho@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
GEN_PRIV and related CHK_* macros just assumed that variable named
"ctx" would be in scope when they are used, and that it would be a
pointer to DisasContext. Change these macros to receive the pointer
explicitly.
Reviewed-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Lucas Coutinho <lucas.coutinho@eldorado.org.br>
Message-Id: <20220701133507.740619-2-lucas.coutinho@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This initial version supports the invalidation of one or all
TLB entries. Flush by PID/LPID, or based in process/partition
scope is not supported, because it would make using the
generic QEMU TLB implementation hard. In these cases, all
entries are flushed.
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220712193741.59134-3-leandro.lupori@eldorado.org.br>
[danielhb: moved 'set' declaration to TLBIE_RIC_PWC block]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Also decode RIC, PRS and R operands.
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220712193741.59134-2-leandro.lupori@eldorado.org.br>
[danielhb: mark bit 31 in @X_tlbie pattern as ignored]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implements the Convert Declets To Binary Coded Decimal instruction.
Since libdecnumber doesn't expose the methods for direct conversion
(decDigitsFromDPD, DPD2BCD, etc), a positive decimal32 with zero
exponent is used as an intermediate value to convert the declets.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220629162904.105060-12-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implements the Convert Binary Coded Decimal To Declets instruction.
Since libdecnumber doesn't expose the methods for direct conversion
(decDigitsToDPD, BCD2DPD, etc.), the BCD values are converted to
decimal32 format, from which the declets are extracted.
Where the behavior is undefined, we try to match the result observed in
a POWER9 DD2.3.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220629162904.105060-11-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
