Use usb_legacy_register handling to create bt-dongle device and remove code
dependency from vl.c so CONFIG_USB_BLUETOOTH can be disabled.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To allow disable usb-bt-dongle device using CONFIG_BLUETOOTH option, some of
functions in vl.c file has to be made accessible in dev-bluetooth.c. This is
pure code moving.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This includes pc and pci cleanups and enhancements,
and a virtio bugfix for level interrupts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSIveoAAoJECgfDbjSjVRp2C8IAL7DE0oM0jfEB5DAd8jlULHx
hA8RP21rFzyU8PwtHB+72+C1ImldBge4hvhI+qbsm6PoW3RCeV/lbESIRTiv8dCO
pGUOFmv8MfJAH+WWFsle5mRisoTksYQWWBMHCOqvmaY4JL9pBQOhCLHVhV1XfjtL
hO7uGrWmlijeILv5CxYyPMYuOEdVvRSZKzE+Fp2YKfNstiQrS5fJIlqmwCHrlneW
l2atnt2d9ZV1K8QYiGg4GRVbSAMJvA1wum+0F4gnXIz9yAeOt+Ht1s8cNKQDMouJ
r2OyVgPM9aS/XaO6ejct1Sjo7Vgh/Ublrpw3lFqV/qHix6rEHwy2I3JHFEJPjvk=
=SytJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups and enhancements,
and a virtio bugfix for level interrupts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 01 Sep 2013 03:15:36 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (3) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
virtio_pci: fix level interrupts with irqfd
pc: reduce duplication, fix PIIX descriptions
hw: Clean up bogus default boot order
pci: add config space access traces
pc: fix regression for 64 bit PCI memory
pci: Introduce helper to retrieve a PCI device's DMA address space
Message-id: 1378023590-11109-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
We set default boot order "cad" in every single machine definition
except "pseries" and "moxiesim", even though very few boards actually
care for boot order, and "cad" makes sense for even fewer.
Machines that care:
* pc and its variants
Accept up to three letters 'a', 'b' (undocumented alias for 'a'),
'c', 'd' and 'n'. Reject all others (fatal with -boot).
* nseries (n800, n810)
Check whether order starts with 'n'. Silently ignored otherwise.
* prep, g3beige, mac99
Extract the first character the machine understands (subset of
'a'..'f'). Silently ignored otherwise.
* spapr
Accept an arbitrary string (vl.c restricts it to contain only
'a'..'p', no duplicates).
* sun4[mdc]
Use the first character. Silently ignored otherwise.
Strip characters these machines ignore from their default boot order.
For all other machines, remove the unused default boot order
alltogether.
Note that my rename of QEMUMachine member boot_order to
default_boot_order and QEMUMachineInitArgs member boot_device to
boot_order has a welcome side effect: it makes every use of boot
orders visible in this patch, for easy review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# By Alex Bligh (32) and others
# Via Stefan Hajnoczi
* stefanha/block: (42 commits)
win32-aio: drop win32_aio_flush_cb()
aio-win32: replace incorrect AioHandler->opaque usage with ->e
aio / timers: remove dummy_io_handler_flush from tests/test-aio.c
aio / timers: Remove legacy interface
aio / timers: Switch entire codebase to the new timer API
aio / timers: Add scripts/switch-timer-api
aio / timers: Add test harness for AioContext timers
aio / timers: convert block_job_sleep_ns and co_sleep_ns to new API
aio / timers: Convert rtc_clock to be a QEMUClockType
aio / timers: Remove main_loop_timerlist
aio / timers: Rearrange timer.h & make legacy functions call non-legacy
aio / timers: Add qemu_clock_get_ms and qemu_clock_get_ms
aio / timers: Remove legacy qemu_clock_deadline & qemu_timerlist_deadline
aio / timers: Remove alarm timers
aio / timers: Add documentation and new format calls
aio / timers: Use all timerlists in icount warp calculations
aio / timers: Introduce new API timer_new and friends
aio / timers: On timer modification, qemu_notify or aio_notify
aio / timers: Convert mainloop to use timeout
aio / timers: Convert aio_poll to use AioContext timers' deadline
...
Message-id: 1377202298-22896-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Convert rtc_clock to be a QEMUClockType
Move rtc_clock users to use the new API
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Remove alarm timers from qemu-timers.c now we use g_poll / ppoll
instead.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Convert stderr messages calling error_get_pretty()
to error_report().
Timestamp is prepended by -msg timstamp option with it.
Per Markus's comment below, A conversion from fprintf() to
error_report() is always an improvement, regardless of
error_get_pretty().
http://marc.info/?l=qemu-devel&m=137513283408601&w=2
But, it is not reasonable to convert them at one time
because fprintf() is used everwhere in qemu.
So, it should be done step by step with avoiding regression.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Spice has two display interface implementations: One integrated into
the qxl graphics card, and one generic which can operate with every
qemu-emulated graphics card.
The generic one is activated in case spice is used without qxl. The
logic for that only caught the "-vga qxl" case, "-device qxl-vga" goes
unnoticed. Fix that by adding a check in the spice interface
registration so we'll notice the qxl card no matter how it is created.
https://bugzilla.redhat.com/show_bug.cgi?id=981094
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
[Issue]
When we offer a customer support service and a problem happens
in a customer's system, we try to understand the problem by
comparing what the customer reports with message logs of the
customer's system.
In this case, we often need to know when the problem happens.
But, currently, there is no timestamp in qemu's error messages.
Therefore, we may not be able to understand the problem based on
error messages.
[Solution]
Add a timestamp to qemu's error message logged by
error_report() with g_time_val_to_iso8601().
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Make it QEMU_OPT_NUMBER, so it gets parsed by generic code, which
actually bothers to check for errors, rather than its user, which
doesn't.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alexander Graf <agraf@suse.de>
Message-id: 1372943363-24081-8-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The previous two commits fixed bugs in -machine option queries. I
can't find fault with the remaining queries, but let's use
qemu_get_machine_opts() everywhere, for consistency, simplicity and
robustness.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372943363-24081-7-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Multiple -machine options with the same ID are merged. All but the
one without an ID are to be silently ignored.
In most places, we query these options with a null ID. This is
correct.
In some places, we instead query whatever options come first in the
list. This is wrong. When the -machine processed first happens to
have an ID, options are taken from that ID, and the ones specified
without ID are silently ignored.
Example:
$ upstream-qemu -nodefaults -S -display none -monitor stdio -machine id=foo -machine accel=kvm,usb=on
$ upstream-qemu -nodefaults -S -display none -monitor stdio -machine id=foo,accel=kvm,usb=on -machine accel=xen
$ upstream-qemu -nodefaults -S -display none -monitor stdio -machine accel=xen -machine id=foo,accel=kvm,usb=on
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -machine accel=kvm,usb=on
QEMU 1.5.50 monitor - type 'help' for more information
(qemu) info kvm
kvm support: enabled
(qemu) info usb
(qemu) q
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -machine id=foo -machine accel=kvm,usb=on
QEMU 1.5.50 monitor - type 'help' for more information
(qemu) info kvm
kvm support: disabled
(qemu) info usb
(qemu) q
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -machine id=foo,accel=kvm,usb=on -machine accel=xen
QEMU 1.5.50 monitor - type 'help' for more information
(qemu) info kvm
kvm support: enabled
(qemu) info usb
USB support not enabled
(qemu) q
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -machine accel=xen -machine id=foo,accel=kvm,usb=on
xc: error: Could not obtain handle on privileged command interface (2 = No such file or directory): Internal error
xen be core: can't open xen interface
failed to initialize Xen: Operation not permitted
Option usb is queried correctly, and the one without an ID wins,
regardless of option order.
Option accel is queried incorrectly, and which one wins depends on
option order and ID.
Affected options are accel (and its sugared forms -enable-kvm and
-no-kvm), kernel_irqchip, kvm_shadow_mem.
Additionally, option kernel_irqchip is normally on by default, except
it's off when no -machine options are given. Bug can't bite, because
kernel_irqchip is used only when KVM is enabled, KVM is off by
default, and enabling always creates -machine options. Downstreams
that enable KVM by default do get bitten, though.
Use qemu_get_machine_opts() to fix these bugs.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372943363-24081-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To be used in the next few commits to fix or clean up queries of
"machine" options (-machine and its sugared forms).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372943363-24081-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This also introduces a new suboption, "cpus=",
which is the default. So after this patch,
-smp n,sockets=y
is the same as
-smp cpus=n,sockets=y
(with "cpu" being some generic thing, referring to
either cores, or threads, or sockets, as before).
We still don't validate relations between different
numbers, for example it is still possible to say
-smp 1,sockets=10
and it will be accepted to mean sockets=1.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-id: 1372072012-30305-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reformats #ifdef..#endif and case statement a bit,
to make it a bit shorter and matching other cases like that
(no code changes).
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1371208516-7857-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Option "once" sets up a different boot order just for the initial
boot. Boot order reverts back to normal on reset. Option "order"
changes the normal boot order.
The reversal is implemented by reset handler restore_boot_devices(),
which takes the boot order to revert to as argument.
restore_boot_devices() does nothing on its first call, because that
must be the initial machine reset. On its second call, it changes the
boot order back, and unregisters itself.
Because we register the handler right when -boot gets parsed, we can
revert to an incorrect normal boot order, and multiple -boot can
interact in funny ways.
Here's how things work without -boot once or order:
* boot_devices is "".
* main() passes machine->boot_order to to machine->init(), because
boot_devices is "". machine->init() configures firmware
accordingly. For PC machines, machine->boot_order is "cad", and
pc_cmos_init() writes it to RTC CMOS, where SeaBIOS picks it up.
Now consider -boot order=:
* boot_devices is "".
* -boot order= sets boot_devices to "" (no change).
* main() passes machine->boot_order to to machine->init(), because
boot_devices is "", as above.
Bug: -boot order= has no effect. Broken in commit e4ada29e.
Next, consider -boot once=a:
* boot_devices is "".
* -boot once=a registers restore_boot_devices() with argument "", and
sets boot_devices to "a".
* main() passes boot_devices "a" to machine->init(), which configures
firmware accordingly. For PC machines, pc_cmos_init() writes the
boot order to RTC CMOS.
* main() calls qemu_system_reset(). This runs reset handlers.
- restore_boot_devices() gets called with argument "". Does
nothing, because it's the first call.
* Machine boots, boot order is "a".
* Machine resets (e.g. monitor command). Reset handlers run.
- restore_boot_devices() gets called with argument "". Calls
qemu_boot_set("") to reconfigure firmware. For PC machines,
pc_boot_set() writes it into RTC CMOS. Reset handler
unregistered.
Bug: boot order reverts to "" instead of machine->boot_order. The
actual boot order depends on how firmware interprets "". Broken
in commit e4ada29e.
Next, consider -boot once=a -boot order=c:
* boot_devices is "".
* -boot once=a registers restore_boot_devices() with argument "", and
sets boot_devices to "a".
* -boot order=c sets boot_devices to "c".
* main() passes boot_devices "c" to machine->init(), which configures
firmware accordingly. For PC machines, pc_cmos_init() writes the
boot order to RTC CMOS.
* main() calls qemu_system_reset(). This runs reset handlers.
- restore_boot_devices() gets called with argument "". Does
nothing, because it's the first call.
* Machine boots, boot order is "c".
Bug: it should be "a". I figure this has always been broken.
* Machine resets (e.g. monitor command). Reset handlers run.
- restore_boot_devices() gets called with argument "". Calls
qemu_boot_set("") to reconfigure firmware. For PC machines,
pc_boot_set() writes it into RTC CMOS. Reset handler
unregistered.
Bug: boot order reverts to "" instead of "c". I figure this has
always been broken, just differently broken before commit
e4ada29e.
Next, consider -boot once=a -boot once=b -boot once=c:
* boot_devices is "".
* -boot once=a registers restore_boot_devices() with argument "", and
sets boot_devices to "a".
* -boot once=b registers restore_boot_devices() with argument "a", and
sets boot_devices to "b".
* -boot once=c registers restore_boot_devices() with argument "b", and
sets boot_devices to "c".
* main() passes boot_devices "c" to machine->init(), which configures
firmware accordingly. For PC machines, pc_cmos_init() writes the
boot order to RTC CMOS.
* main() calls qemu_system_reset(). This runs reset handlers.
- restore_boot_devices() gets called with argument "". Does
nothing, because it's the first call.
- restore_boot_devices() gets called with argument "a". Calls
qemu_boot_set("a") to reconfigure firmware. For PC machines,
pc_boot_set() writes it into RTC CMOS. Reset handler
unregistered.
- restore_boot_devices() gets called with argument "b". Calls
qemu_boot_set("b") to reconfigure firmware. For PC machines,
pc_boot_set() writes it into RTC CMOS. Reset handler
unregistered.
* Machine boots, boot order is "b".
Bug: should really be "c", because that came last, and for all other
-boot options, the last one wins. I figure this was broken some
time before commit 37905d6a, and fixed there only for a single
occurence of "once".
* Machine resets (e.g. monitor command). Reset handlers run.
- restore_boot_devices() gets called with argument "". Calls
qemu_boot_set("") to reconfigure firmware. For PC machines,
pc_boot_set() writes it into RTC CMOS. Reset handler
unregistered.
Same bug as above: boot order reverts to "" instead of
machine->boot_order.
Fix by acting upon -boot options order, once and menu only after
option parsing is complete, and the machine is known. This is how the
other -boot options work already.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1371208516-7857-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 3d3b8303 threw in some QemuOpts parsing without replacing the
existing ad hoc parser, resulting in a confusing mess. Clean it up.
Two user-visible changes:
1. Invalid options are reported more nicely. Before:
qemu: unknown boot parameter 'x' in 'x=y'
After:
qemu-system-x86_64: -boot x=y: Invalid parameter 'x'
2. If -boot is given multiple times, options accumulate, just like for
-machine. Before, only options order, once and menu accumulated.
For the other ones, all but the first -boot in non-legacy syntax
got simply ignored.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1371208516-7857-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 047d4e151d "Unbreak -no-quit for GTK, validate SDL options" broke
build of qemu without sdl, by referencing `no_frame' variable which is defined
inside #if SDL block. Fix that by defining that variable unconditionally.
This is a better fix for the build issue introduced by that patch than
a revert. This change keeps the new functinality introduced by that patch
and just fixes the compilation. It still is not a complete fix around the
original issue (not working -no-frame et al with -display gtk), because it
makes only the legacy interface working, not the new suboption interface,
so a few more changes are needed.
Cc: Peter Wu <lekensteyn@gmail.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Wu <lekensteyn@gmail.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Message-id: 1371292923-28105-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Certain options (-no-frame, -alt-grab, -ctrl-grab) only make sense with SDL.
When compiling without SDL, these options (and -no-quit) print an error message
and exit qemu.
In case QEMU is compiled with SDL support, the three aforementioned options
still do not make sense with other display types. This patch addresses that
issue by printing a warning. I have chosen not to exit QEMU afterwards because
having the option is not harmful and before this patch it would be ignored
anyway.
By delaying the sanity check from compile-time with some ifdefs to run-time,
-no-quit is now also properly supported when compiling without SDL.
Signed-off-by: Peter Wu <lekensteyn@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Aiming for GTK as replacement for SDL, a feature like -full-screen should also
be implemented.
Bringing the window into full-screen mode is done by activating the "Fullscreen"
menu item. This is done after showing the windows to make the cursor and menu
hidden.
v2: drop -no-frame implementation, use booleans instead of ints and ensure
consistency between ui state and menu.
Signed-off-by: Peter Wu <lekensteyn@gmail.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
While in general we forbid a "continue" from the guest panicked
state, it makes sense to have an exception for that when continuing
in the debugger. Perhaps the guest entered that state due to a bug,
for example, and we want to continue no matter what.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Message-id: 1370272015-9659-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This fixes a problem that after guest panic happens, virsh dump without
--memory-only fails:
ERROR: invalid runstate transition: 'guest-panicked' -> 'finish-migrate'
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1369046780-17498-1-git-send-email-pbonzini@redhat.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
VCPUs are either resumed directly via vm_start(), after the incoming
migration is done, or when a continue command is issued. We don't need
the explicit resume before entering main_loop().
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
If hotplugged, synchronize CPU state to KVM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The guest will be in this state when it is panicked.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 0255f263ffdc2a3716f73e89098b96fd79a235b3.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Several targets can have wavcapture/-soundhw support via PCI cards.
HAS_AUDIO is a useless limitation, remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1366303444-24620-4-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead of manually parsing the boot_list as character stream,
we can access the nth boot device, specified by the position in the
boot order.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move the TPM passthrough specific command line options to the passthrough
backend implementation and attach them to the backend's interface structure.
Add code to tpm.c for validating the TPM command line options.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryan <coreyb@linux.vnet.ibm.com>
Message-id: 1366641699-21420-1-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In certain scenario, latency induced by paging is significant and
memory locking is needed. Also, in the scenario with untrusted
guests, latency improvement due to mlock is desired.
This patch introduces a following new option to mlock guest and
qemu memory:
-realtime mlock=on|off
Signed-off-by: Satoru Moriya <satoru.moriya@hds.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1366382526-26146-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We have only one DisplayState, so there is no need for the "next"
linking, rip it. Also consolidate all displaystate initialization
into init_displaystate(). This function is called by vl.c after
creating the devices (and thus all QemuConsoles) and before
initializing DisplayChangeListensers (aka gtk/sdl/vnc/spice ui).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* bonzini/hw-dirs:
exec: remove useless declarations from memory-internal.h
memory: move core typedefs to qemu/typedefs.h
include: avoid useless includes of exec/ headers
sysemu: avoid proliferation of include/ subdirectories
tpm: reorganize headers and split hardware part
configure: fix TPM logic
acpi.h: make it self contained
acpi: move declarations from pc.h to acpi.h
hw: Add lost ARM core again
Fix failure to create q35 machine
Add linux-headers to QEMU_INCLUDES
arm: fix location of some include files
Conflicts:
configure
aliguori: trivial conflict in configure output
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The TPM subsystem does not have a full front-end/back-end separation.
The sole available backend, tpm_passthrough, depends on the data
structures of the sole available frontend, tpm_tis.
However, we can at least try to split the user interface (tpm.c) from the
implementation (hw/tpm). The patches makes tpm.c not include tpm_int.h,
which is shared between tpm_tis.c and tpm_passthrough.c; instead it
moves more stuff to tpm_backend.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 4d700430a2 as asked by
Luiz. The patch has been obsoleted by extending MachineInfo structure
by cpu-max field.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Alter the query-machines QMP command to output information about
maximum number of CPUs for each machine type with default value
set to 1 in case the number of max_cpus is not set.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As one consequence, strtok() -- which modifies its argument -- is replaced
with g_strsplit().
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1363821803-3380-6-git-send-email-lersek@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
chardev-frontends need to explictly check, increase and decrement the
avail_connections "property" of the chardev when they are not using a
qdev-chardev-property for the chardev.
This fixes things like:
qemu-kvm -chardev stdio,id=foo -device isa-serial,chardev=foo \
-mon chardev=foo
Working, where they should fail. Most of the changes here are due to
old hardware emulation code which is using serial_hds directly rather then
a qdev-chardev-property.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364412581-3672-3-git-send-email-hdegoede@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Problem was introduced in commit c8a6ae8b. The last terminating
'\0' was lost, use the right length 5 ("HALT\0").
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Message-id: 1363774594-21001-1-git-send-email-akong@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Kevin Wolf (22) and Peter Lieven (1)
# Via Stefan Hajnoczi
* stefanha/block: (23 commits)
block: Fix direct use of protocols as driver for bdrv_open()
qcow2: Gather clusters in a looping loop
qcow2: Move cluster gathering to a non-looping loop
qcow2: Allow requests with multiple l2metas
qcow2: Use byte granularity in qcow2_alloc_cluster_offset()
qcow2: Prepare handle_alloc/copied() for byte granularity
qcow2: handle_copied(): Implement non-zero host_offset
qcow2: handle_copied(): Get rid of keep_clusters parameter
qcow2: handle_copied(): Get rid of nb_clusters parameter
qcow2: Factor out handle_copied()
qcow2: Clean up handle_alloc()
qcow2: Finalise interface of handle_alloc()
qcow2: handle_alloc(): Get rid of keep_clusters parameter
qcow2: handle_alloc(): Get rid of nb_clusters parameter
qcow2: Factor out handle_alloc()
qcow2: Decouple cluster allocation from cluster reuse code
qcow2: Change handle_dependency to byte granularity
qcow2: Improve check for overlapping allocations
qcow2: Handle dependencies earlier
qcow2: Remove bogus unlock of s->lock
...
This patch enables us to know RunState transition. It will be userful
for investigation when the trouble occured in special event such like
live migration, shutdown, suspend, and so on.
Signed-off-by: Kazuya Saito <saito.kazuya@jp.fujitsu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
