This version (and 84.0) contain improvements that address specific
QEMU use cases, including:
* Being able to download and use Fedora 31 images and thus
re-activate the "boot_linux.py" tests
* Being able to register local assets via "avocado assets register"
and use them in tests
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210211232835.2608059-2-crosa@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
To use Avocado's testlogs plug-in on CI it is required to use
its 83.0 or greater version.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20201211183827.915232-2-wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On with certain versions of "pip", package installations will attempt
to create wheels. And, on environments without a "complete" Python
installation (as described in the acceptance tests requirements docs),
that will fail.
pycdlib, starting with version 1.11.0, is now being made available
as wheels, so its instalation on those constrained environments is
now possible.
Buglink: https://bugs.launchpad.net/qemu/+bug/1897783
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009205513.751968-2-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reverse debugging test uses gdb remote client of avocado framework.
This client was fixed since the currently used version 76.
Therefore this patch bumps the version to 81 and fixes command
line version compatibility issue.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <159903462803.28509.16851113546106095750.stgit@pasha-ThinkPad-X280>
Message-Id: <20200908202352.298506-2-philmd@redhat.com>
Message-Id: <20200909112742.25730-9-alex.bennee@linaro.org>
This acceptance test, validates that a full blown Linux guest can
successfully boot in QEMU. In this specific case, the guest chosen is
Fedora version 31.
* x86_64, pc-i440fx and pc-q35 machine types, with TCG and KVM as
accelerators
* aarch64 and virt machine type, with TCG and KVM as accelerators
* ppc64 and pseries machine type with TCG as accelerator
* s390x and s390-ccw-virtio machine type with TCG as accelerator
The Avocado vmimage utils library is used to download and cache the
Linux guest images, and from those images a snapshot image is created
and given to QEMU. If a qemu-img binary is available in the build
directory, it's used to create the snapshot image, so that matching
qemu-system-* and qemu-img are used in the same test run. If qemu-img
is not available in the build tree, one is attempted to be found
installed system-wide (in the $PATH). If qemu-img is not found in the
build dir or in the $PATH, the test is canceled.
The method for checking the successful boot is based on "cloudinit"
and its "phone home" feature. The guest is given an ISO image with
the location of the phone home server, and the information to post
(the instance ID). Upon receiving the correct information, from the
guest, the test is considered to have PASSed.
This test is currently limited to user mode networking only, and
instructs the guest to connect to the "router" address that is hard
coded in QEMU.
To create the cloudinit ISO image that will be used to configure the
guest, the pycdlib library is also required and has been added as
requirement to the virtual environment created by "check-venv".
The console output is read by a separate thread, by means of the
Avocado datadrainer utility module.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20200317141654.29355-3-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
If we want to use @skipUnless decorations on the class we need a
newer version of avocado.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200303150622.20133-9-alex.bennee@linaro.org>
This replaces paramiko with avocado.utils.ssh module, which is based
on a (open)ssh binary, supposedly more ubiquitous.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190919225905.10829-1-crosa@redhat.com>
[Cleber: consolidated existing skipUnless from tests to setUp]
Signed-off-by: Cleber Rosa <crosa@redhat.com>
It's a good practice (I'd really say a must) to pin as much as
possible of the software versions used during test, so let's apply
that to paramiko.
According to https://pypi.org/project/paramiko/, 2.4.2 is the latest
released version. It's also easily obtainable on systems such as
Fedora 30.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607152223.9467-3-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
This tests boot a full VM and check the serial console until
the SSH daemon is running, then start a SSH session and run
some commands.
This test can be run using:
$ avocado --show=ssh run -t arch:mips tests/acceptance/linux_ssh_mips_malta.py
ssh: Entering interactive session.
ssh: # uname -a
ssh: Linux debian-mips 3.2.0-4-4kc-malta #1 Debian 3.2.51-1 mips GNU/Linux
ssh: # lspci -d 11ab:4620
ssh: 00:00.0 Host bridge: Marvell Technology Group Ltd. GT-64120/64120A/64121A System Controller (rev 10)
ssh: # cat /sys/bus/i2c/devices/i2c-0/name
ssh: SMBus PIIX4 adapter at 1100
ssh: # cat /proc/mtd
ssh: dev: size erasesize name
ssh: mtd0: 00100000 00010000 "YAMON"
ssh: mtd1: 002e0000 00010000 "User FS"
ssh: mtd2: 00020000 00010000 "Board Config"
ssh: # md5sum /dev/mtd2ro
ssh: 0dfbe8aa4c20b52e1b8bf3cb6cbdf193 /dev/mtd2ro
ssh: # poweroff
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190523161832.22490-5-f4bug@amsat.org>
The Avocado test runner attemps to find its INSTRUMENTED (that is,
Python based tests) in a manner that is as safe as possible to the
user. Different from plain Python unittest, it won't load or
execute test code on an operation such as:
$ avocado list tests/acceptance/
Before version 68.0, the logic implemented to identify INSTRUMENTED
tests would require either the "🥑 enable" or "🥑
recursive" statement as a flag for tests that would not inherit
directly from "avocado.Test". This is not necessary anymore,
and because of that the boiler plate statements can now be removed.
Reference: https://avocado-framework.readthedocs.io/en/68.0/release_notes/68_0.html#users-test-writers
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190218173723.26120-1-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The acceptance (aka functional, aka Avocado-based) tests are
Python files located in "tests/acceptance" that need to be run
with the Avocado libs and test runner.
Let's provide a convenient way for QEMU developers to run them,
by making use of the tests-venv with the required setup.
Also, while the Avocado test runner will take care of creating a
location to save test results to, it was understood that it's better
if the results are kept within the build tree.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20181018153134.8493-3-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
A number of QEMU tests are written in Python, and may benefit
from an untainted Python venv.
By using make rules, tests that depend on specific Python libs
can set that rule as a requirement, along with rules that require
the presence or installation of specific libraries.
The tests/requirements.txt is supposed to contain the Python
requirements that should be added to the venv created by check-venv.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20181018153134.8493-2-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
