New option will be used to allow commands, which are prepared/need
to run, during preconfig state. Other commands that should be able
to run in preconfig state, should be amended to not expect machine
in initialized state or deal with it.
For compatibility reasons, commands that don't use new flag
'allow-preconfig' explicitly are not permitted to run in
preconfig state but allowed in all other states like they used
to be.
Within this patch allow following commands in preconfig state:
qmp_capabilities
query-qmp-schema
query-commands
query-command-line-options
query-status
exit-preconfig
to allow qmp connection, basic introspection and moving to the next
state.
PS:
set-numa-node and query-hotpluggable-cpus will be enabled later in
a separate patches.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1526057503-39287-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[ehabkost: Changed "since 2.13" to "since 3.0"]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Ban it for now, if someone would need it to work early,
one would have to implement checks if HMP command is valid
at preconfig state.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1525423069-61903-5-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
For convenience and clarity, make it possible to call qobject_ref() at
the time when the reference is associated with a variable, or
argument, by making qobject_ref() return the same pointer as given.
Use that to simplify the callers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-5-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Useless change to qobject_ref_impl() dropped, commit message improved
slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Auger reported the problem days ago that OOB broke ARM when running
with libvirt:
http://lists.gnu.org/archive/html/qemu-devel/2018-03/msg06231.html
The problem was that the monitor dispatcher bottom half was bound to
qemu_aio_context now, which could be polled unexpectedly in block code.
We should keep the dispatchers run in iohandler_ctx just like what we
did before the Out-Of-Band series (chardev uses qio, and qio binds
everything with iohandler_ctx).
If without this change, QMP dispatcher might be run even before reaching
main loop in block IO path, for example, in a stack like (the ARM case,
"cont" command handler run even during machine init phase):
#0 qmp_cont ()
#1 0x00000000006bd210 in qmp_marshal_cont ()
#2 0x0000000000ac05c4 in do_qmp_dispatch ()
#3 0x0000000000ac07a0 in qmp_dispatch ()
#4 0x0000000000472d60 in monitor_qmp_dispatch_one ()
#5 0x000000000047302c in monitor_qmp_bh_dispatcher ()
#6 0x0000000000acf374 in aio_bh_call ()
#7 0x0000000000acf428 in aio_bh_poll ()
#8 0x0000000000ad5110 in aio_poll ()
#9 0x0000000000a08ab8 in blk_prw ()
#10 0x0000000000a091c4 in blk_pread ()
#11 0x0000000000734f94 in pflash_cfi01_realize ()
#12 0x000000000075a3a4 in device_set_realized ()
#13 0x00000000009a26cc in property_set_bool ()
#14 0x00000000009a0a40 in object_property_set ()
#15 0x00000000009a3a08 in object_property_set_qobject ()
#16 0x00000000009a0c8c in object_property_set_bool ()
#17 0x0000000000758f94 in qdev_init_nofail ()
#18 0x000000000058e190 in create_one_flash ()
#19 0x000000000058e2f4 in create_flash ()
#20 0x00000000005902f0 in machvirt_init ()
#21 0x00000000007635cc in machine_run_board_init ()
#22 0x00000000006b135c in main ()
Actually the problem is more severe than that. After we switched to the
qemu AIO handler it means the monitor dispatcher code can even be called
with nested aio_poll(), then it can be an explicit aio_poll() inside
another main loop aio_poll() which could be racy too; breaking code
like TPM and 9p that use nested event loops.
Switch to use the iohandler_ctx for monitor dispatchers.
My sincere thanks to Eric Auger who offered great help during both
debugging and verifying the problem. The ARM test was carried out by
applying this patch upon QEMU 2.12.0-rc0 and problem is gone after the
patch.
A quick test of mine shows that after this patch applied we can pass all
raw iotests even with OOB on by default.
CC: Eric Blake <eblake@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
Reported-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180410044942.17059-1-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add new parameter to optionally enable Out-Of-Band for a QMP server.
An example command line:
./qemu-system-x86_64 -chardev stdio,id=char0 \
-mon chardev=char0,mode=control,x-oob=on
By default, Out-Of-Band is off.
It is not allowed if either MUX or non-QMP is detected, since
Out-Of-Band is currently only for QMP, and non-MUX chardev backends.
Note that the client STILL has to request 'oob' during qmp_capabilities;
in part because the x-oob command line option may disappear in the
future if we decide the capabilities negotiation is sufficient.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180326063901.27425-4-peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: enhance commit message]
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Marc-André Lureau reported that we can have this happen:
1. client1 connects, send command C1
2. client1 disconnects before getting response for C1
3. client2 connects, who might receive response of C1
However client2 should not receive remaining responses for client1.
Basically, we should clean up the request/response queue elements when:
- after a session is closed
- before destroying the queues
Some helpers are introduced to achieve that. We need to make sure we're
with the lock when operating on those queues. This also needed the
declaration of QMPRequest moved earlier.
Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180326063901.27425-3-peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: drop pointless qmp_response_free(), drop queue flush on connect
since a clean queue on disconnect is sufficient]
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
When someone sends a command before QMP handshake, the error used to be
like this:
{"execute": "query-cpus"}
{"error": {"class": "CommandNotFound", "desc":
"Expecting capabilities negotiation with 'qmp_capabilities'"}}
While after cf869d5317 it becomes:
{"execute": "query-cpus"}
{"error": {"class": "CommandNotFound", "desc":
"The command query-cpus has not been found"}}
Fix it back to the nicer one.
Fixes: cf869d5317 ("qmp: support out-of-band (oob) execution", 2018-03-19)
Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180326063901.27425-2-peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: commit message grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
This reverts commit 3fd2457d18.
Enabling OOB caused several iotests failures; due to the imminent
2.12 release, the safest action is to disable OOB for now. If
other patches fix the issues that iotests exposed, it may be turned
back on in time for the release, otherwise it will be 2.13 material;
either way, the framework changes not reverted now do not hurt if
they remain as part of the 2.12 release.
Additionally, revert the tests in the patch 02130314d8 ("qmp: introduce
QMPCapability", 2018-03-19), as both parts must be reverted at once
to keep 'make check' passing.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180323140821.28957-2-peterx@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
[eblake: reorder/squash commits, enhance commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
Start to use dedicate IO thread for QMP monitors that are not using
MUXed chardev.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-21-peterx@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
For those monitors who have enabled IO thread, we'll offload the
responding procedure into IO thread. The main reason is that chardev is
not thread safe, and we need to do all the read/write IOs in the same
thread. For use_io_thr=true monitors, that thread is the IO thread.
We do this isolation in similar pattern as what we have done to the
request queue: we first create one response queue for each monitor, then
instead of replying directly in the main thread, we queue the responses
and kick the IO thread to do the rest of the job for us.
A funny thing after doing this is that, when the QMP clients send "quit"
to QEMU, it's possible that we close the IOThread even earlier than
replying to that "quit". So another thing we need to do before cleaning
up the monitors is that we need to flush the response queue (we don't
need to do that for command queue; after all we are quitting) to make
sure replies for handled commands are always flushed back to clients.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-20-peterx@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Having "allow-oob":true for a command does not mean that this command
will always be run in out-of-band mode. The out-of-band quick path will
only be executed if we specify the extra "run-oob" flag when sending the
QMP request:
{ "execute": "command-that-allows-oob",
"arguments": { ... },
"control": { "run-oob": true } }
The "control" key is introduced to store this extra flag. "control"
field is used to store arguments that are shared by all the commands,
rather than command specific arguments. Let "run-oob" be the first.
Note that in the patch I exported qmp_dispatch_check_obj() to be used to
check the request earlier, and at the same time allowed "id" field to be
there since actually we always allow that.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-19-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to qobject_to(), spelling fix]
Signed-off-by: Eric Blake <eblake@redhat.com>
Set maximum QMP command queue length to 8. If the queue is full,
instead of queuing the command, we directly return a "command-dropped"
event, telling the client that a specific command is dropped.
Note that this flow control mechanism is only valid if OOB is enabled.
If it's not, the effective queue length will always be 1, which strictly
follows original behavior of QMP command handling (which never drops
messages).
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-17-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: commit message grammar, abort on failure to send event]
Signed-off-by: Eric Blake <eblake@redhat.com>
Originally QMP goes through these steps:
JSON Parser --> QMP Dispatcher --> Respond
/|\ (2) (3) |
(1) | \|/ (4)
+--------- main thread --------+
This patch does this:
JSON Parser QMP Dispatcher --> Respond
/|\ | /|\ (4) |
| | (2) | (3) | (5)
(1) | +-----> | \|/
+--------- main thread <-------+
So the parsing job and the dispatching job is isolated now. It gives us
a chance in follow up patches to totally move the parser outside.
The isolation is done using one QEMUBH. Only one dispatcher QEMUBH is
used for all the monitors.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-15-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks, rebase to qobject_to()]
Signed-off-by: Eric Blake <eblake@redhat.com>
This patches allows QMP monitors to be suspended/resumed.
One thing to mention is that for QMPs that are using IOThreads, we need
an explicit kick for the IOThread in case it is sleeping.
Meanwhile, we need to take special care on non-interactive HMPs.
Currently only gdbserver is using that. For these monitors, we still
don't allow suspend/resume operations.
Since at it, add traces for the operations.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-14-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Monitor code now can be run in more than one thread. Let it be thread
safe when accessing suspend_cnt counter.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-13-peterx@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
A tiny refactoring, preparing to split the QMP dispatcher away.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-12-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to qobject_to() usage]
Signed-off-by: Eric Blake <eblake@redhat.com>
There were no QMP capabilities defined. Define the first capability,
"oob", to allow out-of-band messages.
After this patch, we will allow QMP clients to enable QMP capabilities
when sending the first "qmp_capabilities" command. Originally we are
starting QMP session with no arguments like:
{ "execute": "qmp_capabilities" }
Now we can enable some QMP capabilities using (take OOB as example,
which is the only capability that we support):
{ "execute": "qmp_capabilities",
"arguments": { "enable": [ "oob" ] } }
When the "arguments" key is not provided, no capability is enabled.
For capability "oob", the monitor needs to be run on a dedicated IO
thread, otherwise the command will fail. For example, trying to enable
OOB on a MUXed typed QMP monitor will fail.
One thing to mention is that QMP capabilities are per-monitor, and also
when the connection is closed due to some reason, the capabilities will
be reset.
Also, touch up qmp-test.c to test the new bits.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-11-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
For each Monitor, add one field "use_io_thr" to show whether it will be
using the dedicated monitor IO thread to handle input/output. When set,
monitor IO parsing work will be offloaded to the dedicated monitor IO
thread, rather than the original main loop thread.
This only works for QMP. HMP will always be run on the main loop
thread.
Currently we're still keeping use_io_thr off always. Will turn it on
later at some point.
One thing to mention is that we cannot set use_io_thr for every QMP
monitor. The problem is that MUXed typed chardevs may not work well
with it now. When MUX is used, frontend of chardev can be the monitor
plus something else. The only thing we know would be safe to be run
outside main thread so far is the monitor frontend. All the rest of the
frontends should still be run in main thread only.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-10-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: squash in Peter's followup patch to avoid test failures]
Signed-off-by: Eric Blake <eblake@redhat.com>
It was QLIST. I want to use this list to do monitor priority job later,
which need tail insertion ability. So switching to a tail queue.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-9-peterx@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
There are many places where the monitor initializes its globals:
- monitor_init_qmp_commands() at the very beginning
- single function to init monitor_lock
- in the first entry of monitor_init() using "is_first_init"
Unify them a bit.
monitor_lock is not used before monitor_init() (as confirmed by code
analysis and gdb watchpoints); so we are safe delaying what was a
constructor-time initialization of the mutex into the later first call
to monitor_init().
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-8-peterx@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In monitor_qmp_read(), we have the hack to temporarily replace the
cur_mon pointer. Now we move this hack deeper inside the QMP dispatcher
routine since the Monitor pointer can be actually obtained using
container_of() upon the parser object, just like most of the other JSON
parser users do.
This does not make much sense as a single patch. However, this will be
a big step for the next patch, when the QMP dispatcher routine will be
split from the QMP parser.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-7-peterx@redhat.com>
[eblake: rebase context of qobject_to() macro]
Signed-off-by: Eric Blake <eblake@redhat.com>
It's part of the data init. Collect it.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-6-peterx@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch was generated using the following Coccinelle script:
@@
expression Obj;
@@
(
- qobject_to_qnum(Obj)
+ qobject_to(QNum, Obj)
|
- qobject_to_qstring(Obj)
+ qobject_to(QString, Obj)
|
- qobject_to_qdict(Obj)
+ qobject_to(QDict, Obj)
|
- qobject_to_qlist(Obj)
+ qobject_to(QList, Obj)
|
- qobject_to_qbool(Obj)
+ qobject_to(QBool, Obj)
)
and a bit of manual fix-up for overly long lines and three places in
tests/check-qjson.c that Coccinelle did not find.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: swap order from qobject_to(o, X), rebase to master, also a fix
to latent false-positive compiler complaint about hw/i386/acpi-build.c]
Signed-off-by: Eric Blake <eblake@redhat.com>
Replace the generated json string with a literal qobject. The later is
easier to deal with, at run time as well as compile time: adding #if
conditionals will be easier than in a json string.
The output of query-qmp-schema is not changed.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180305172951.2150-5-marcandre.lureau@redhat.com>
[eblake: fix python 3 failure]
Signed-off-by: Eric Blake <eblake@redhat.com>
The command can be used by libvirt to query the SEV capabilities.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The command can be used by libvirt to retrieve the measurement of SEV guest.
This measurement is a signature of the memory contents that was encrypted
through the LAUNCH_UPDATE_DATA.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The QMP query command can used to retrieve the SEV information when
memory encryption is enabled on AMD platform.
Cc: Eric Blake <eblake@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJanLRTAAoJEO8Ells5jWIRAxsH/3wX62o+msLjJHakjcu2OTMG
vdhnB8GfjC5HgMYbovG7TJ95KXg7VRodwru9zgJheTK7DG8fG0nFRuzr8L2tSAph
3s0YTFYDXJ6MBYD//ubdX+jNnchIvMlTX6yheAzcXvQb+nCcN2efN0XpSlGR+g4D
wGi1lWKurGEJE6RUfYPpbbUkjXjbbKyclE0RL+WBmmyruerXI8OxuXQ3GuHK75fb
cZLiToyP9+qnnDyT4lceG5vGRjYLtL8t1nB01M4UTr+tlCkMMsoOjufzGB/CDUdm
oGi1OuKRw06xTLroUJ/uiwSKQH6dMbrv6sLvk92dHnL9k2ZAjv2bVAgz8eAG7o0=
=pPIZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 05 Mar 2018 03:06:59 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tap: setting error appropriately when calling net_init_tap_one()
hw/net: Remove unnecessary header includes
net: Add a new convenience option "--nic" to configure default/on-board NICs
net: Remove the deprecated 'host_net_add' and 'host_net_remove' HMP commands
net: Remove the deprecated way of dumping network packets
net: Make net_client_init() static
net: Only show vhost-user in the help text if CONFIG_POSIX is defined
net: List available netdevs with "-netdev help"
net: Move error reporting from net_init_client/netdev to the calling site
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
They are deprecated since QEMU v2.10, and so far nobody complained that
these commands are still necessary for any reason - and since you can use
'netdev_add' and 'netdev_remove' instead, there also should not be any
real reason. Since they are also standing in the way for the upcoming
'vlan' clean-up, it's now time to remove them.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Move qapi-schema.json to qapi/, so it's next to its modules, and all
files get generated to qapi/, not just the ones generated for modules.
Consistently name the generated files qapi-MODULE.EXT:
qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become
qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch].
This gets rid of the temporary hacks in scripts/qapi/commands.py,
scripts/qapi/events.py, and scripts/qapi/common.py.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain]
Signed-off-by: Eric Blake <eblake@redhat.com>
Whenever qapi-schema.json changes, we run six programs eleven times to
update eleven files. Similar for qga/qapi-schema.json. This is
silly. Replace the six programs by a single program that spits out
all eleven files.
The programs become modules in new Python package qapi, along with the
helper library. This requires moving them to scripts/qapi/. While
moving them, consistently drop executable mode bits.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180211093607.27351-9-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: move change to one-line 'blurb' earlier in series, mention mode
bit change as intentional, update qapi-code-gen.txt to match actual
generated events.c file]
Signed-off-by: Eric Blake <eblake@redhat.com>
Changing the implementation of hmp_info_cpus() to call
qmp_query_cpus_fast() instead of qmp_query_cpus. This has the
following consequences:
o No further code change required for qmp_query_cpus deprecation
o HMP profits from the less disruptive cpu information retrieval
o HMP 'info cpus' won't display architecture specific data anymore,
which should be tolerable in the light of the deprecation of
query-cpus.
In order to allow 'info cpus' to be executed completely on the
fast path, monitor_get_cpu_index() has been adapted to not synchronize
the cpu state.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Message-Id: <1518797321-28356-6-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The QEMU monitor enters an infinite loop when trying to auto-complete commands
that accept only optional parameters. The commands currently affected by this
issue are 'info registers' and 'info mtree'.
Reported-by: Dimitris Karagkasidis <t.pagef.lt@gmail.com>
Fixes: 48fe86f640
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180213125143.23488-1-dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The "default" parameter of the "-mon" option is useless since
QEMU v2.4.0, and marked as deprecated since QEMU v2.8.0. That
should have been long enough to let people update their scripts,
so time to remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1513700253-10045-1-git-send-email-thuth@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-18-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-14-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
The macro expansions of qdict_put_TYPE() and qlist_append_TYPE() need
qbool.h, qnull.h, qnum.h and qstring.h to compile. We include qnull.h
and qnum.h in the headers, but not qbool.h and qstring.h. Works,
because we include those wherever the macros get used.
Open-coding these helpers is of dubious value. Turn them into
functions and drop the includes from the headers.
This cleanup makes the number of objects depending on qapi/qmp/qnum.h
from 4551 (out of 4743) to 46 in my "build everything" tree. For
qapi/qmp/qnull.h, the number drops from 4552 to 21.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-10-armbru@redhat.com>
qapi/qmp/types.h is a convenience header to include a number of
qapi/qmp/ headers. Since we rarely need all of the headers
qapi/qmp/types.h includes, we bypass it most of the time. Most of the
places that use it don't need all the headers, either.
Include the necessary headers directly, and drop qapi/qmp/types.h.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-9-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
Fixes leaks such as:
Direct leak of 2 byte(s) in 1 object(s) allocated from:
#0 0x7eff58beb850 in malloc (/lib64/libasan.so.4+0xde850)
#1 0x7eff57942f0c in g_malloc ../glib/gmem.c:94
#2 0x7eff579431cf in g_malloc_n ../glib/gmem.c:331
#3 0x7eff5795f6eb in g_strdup ../glib/gstrfuncs.c:363
#4 0x55db720f1d46 in readline_hist_add /home/elmarco/src/qq/util/readline.c:258
#5 0x55db720f2d34 in readline_handle_byte /home/elmarco/src/qq/util/readline.c:387
#6 0x55db71539d00 in monitor_read /home/elmarco/src/qq/monitor.c:3896
#7 0x55db71f9be35 in qemu_chr_be_write_impl /home/elmarco/src/qq/chardev/char.c:167
#8 0x55db71f9bed3 in qemu_chr_be_write /home/elmarco/src/qq/chardev/char.c:179
#9 0x55db71fa013c in fd_chr_read /home/elmarco/src/qq/chardev/char-fd.c:66
#10 0x55db71fe18a8 in qio_channel_fd_source_dispatch /home/elmarco/src/qq/io/channel-watch.c:84
#11 0x7eff5793a90b in g_main_dispatch ../glib/gmain.c:3182
#12 0x7eff5793b7ac in g_main_context_dispatch ../glib/gmain.c:3847
#13 0x55db720af3bd in glib_pollfds_poll /home/elmarco/src/qq/util/main-loop.c:214
#14 0x55db720af505 in os_host_main_loop_wait /home/elmarco/src/qq/util/main-loop.c:261
#15 0x55db720af6d6 in main_loop_wait /home/elmarco/src/qq/util/main-loop.c:515
#16 0x55db7184e0de in main_loop /home/elmarco/src/qq/vl.c:1995
#17 0x55db7185e956 in main /home/elmarco/src/qq/vl.c:4914
#18 0x7eff4ea17039 in __libc_start_main (/lib64/libc.so.6+0x21039)
(while at it, use g_new0(ReadLineState), it's a bit easier to read)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180104160523.22995-11-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If a CPU selected with the "cpu" command is hot-unplugged then "info cpus"
causes QEMU to exit:
(qemu) device_del cpu1
(qemu) info cpus
qemu:qemu_cpu_kick_thread: No such process
This happens because "cpu" stores the pointer to the selected CPU into
the monitor structure. When the CPU is hot-unplugged, we end up with a
dangling pointer. The "info cpus" command then does:
hmp_info_cpus()
monitor_get_cpu_index()
mon_get_cpu()
cpu_synchronize_state() <--- called with dangling pointer
This could cause a QEMU crash as well.
This patch switches the monitor to store the QOM path instead of a
pointer to the current CPU. The path is then resolved when needed.
If the resolution fails, we assume that the CPU was removed and the
path is resetted to the default (ie, path of first_cpu).
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <150822818243.26242.12993827911736928961.stgit@bahia.lan>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Now that every target is using the disas_set_info hook,
the flags argument is unused. Remove it.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
