The test is slightly weaker than before, because it does not
call an extern "C" function from a C source file. However,
in practice what we seek to detect is ABI compatibility of the
various sanitizer flags, and for that it is enough to compile
anything with CC and link it with CXX.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This removes the dependency of dbus-display on --enable-modules. It also allows
cleanups in modinfo collection and allows moving C++ compiler detection to
meson.build.
Because it is now deprecated to use install_subdir to create an empty directory,
replace it with install_emptydir.
Updating the Meson submodule to 0.61.5 also removes the message
WARNING: Broken python installation detected. Python files installed
by Meson might not be found by python interpreter.
unless using system meson is forced with --meson.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/873
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/848
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just use using the compiler binary, with -nostdlib in the case of the
linker; the compiler driver (whether i686-*-gcc, or x86_64-*-gcc with
the -m32 option) will then pick the right magic option to as and ld.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since QEMU 7.1 we don't support Ubuntu 18.04 anymore, so the last big
important Linux distro that did not have a pre-packaged libslirp has
been dismissed. All other major distros seem to have a libslirp package
in their distribution already - according to repology.org:
Fedora 35: 4.6.1
CentOS 8 (RHEL-8): 4.4.0
Debian 11: 4.4.0
OpenSUSE Leap 15.3: 4.3.1
Ubuntu LTS 20.04: 4.1.0
FreeBSD Ports: 4.7.0
NetBSD pkgsrc: 4.7.0
Homebrew: 4.7.0
MSYS2 mingw: 4.7.0
The only one that was still missing a libslirp package is OpenBSD - but
the next version (OpenBSD 7.2 which will be shipped in October) is going
to include a libslirp package. Since QEMU 7.2 will be published after
OpenBSD 7.2, we should be fine there, too.
So there is no real urgent need for keeping the slirp submodule in
the QEMU tree anymore. Thus let's drop the slirp submodule now and
rely on the libslirp packages from the distributions instead.
Message-Id: <20220824151122.704946-7-thuth@redhat.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A Linux headers update to v6.0-rc switches some definitions from GNU
'zero-length-array' extension to the C-standard-defined flexible array
member. e.g.
struct kvm_msrs {
__u32 nmsrs; /* number of msrs in entries */
__u32 pad;
- struct kvm_msr_entry entries[0];
+ struct kvm_msr_entry entries[];
};
Those (unlike the GNU zero-length-array) have some extra restrictions like
'this must be put at the end of a struct', which clang build would complain
about. e.g. the current code
struct {
struct kvm_msrs info;
struct kvm_msr_entry entries[1];
} msr_data = { }
generates the warning like:
target/i386/kvm/kvm.c:2868:25: error: field 'info' with variable sized
type 'struct kvm_msrs' not at the end of a struct or class is a GNU
extension [-Werror,-Wgnu-variable-sized-type-not-at-end]
struct kvm_msrs info;
^
In fact, the variable length 'entries[]' field in 'info' is zero-sized in
GNU defined semantics, which can give predictable offset for 'entries[1]'
in local msr_data. The local defined struct is just there to force a stack
allocation large enough for 1 kvm_msr_entry, a clever trick but requires to
turn off this clang warning.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20220915091035.3897-2-chenyi.qiang@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We use the non-POSIX 'local' keyword in just two places in configure;
rewrite to avoid it.
In do_compiler(), just drop the 'local' keyword. The variable
'compiler' is only used elsewhere in the do_compiler_werror()
function, which already uses the variable as a normal non-local one.
In probe_target_compiler(), $try and $t are both local; make them
normal variables and use a more obviously distinct variable name
for $t.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-8-peter.maydell@linaro.org
Shellcheck warns that we have one place where we run a command and
then check if it failed using $?; this is better written to simply
check the command in the 'if' statement directly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-7-peter.maydell@linaro.org
There's only one place in configure where we use `...` to execute a
command and capture the result. Switch to $() to match the rest of
the script. This silences a shellcheck warning.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-6-peter.maydell@linaro.org
Shellcheck warns that in
rm -f */config-devices.mak.d
the glob might expand to something with a '-' in it, which would
then be misinterpreted as an option to rm. Fix this by adding './'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-5-peter.maydell@linaro.org
This commit adds quotes in some places which:
* are spotted by shellcheck
* are obviously incorrect
* are easy to fix just by adding the quotes
It doesn't attempt fix all of the places shellcheck finds errors,
or even all the ones which are easy to fix. It's just a random
sampling which is hopefully easy to review and which cuts
down the size of the problem for next time somebody wants to
try to look at shellcheck errors.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-4-peter.maydell@linaro.org
The meson_args variable was added in commit 3b4da13293, but
was not used in that commit and isn't used today. Delete the
unnecessary assignment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-3-peter.maydell@linaro.org
Shellcheck correctly reports that we set python_version and never use
it. This is a leftover from commit f933275789: we used to use
python_version purely to as part of the summary information printed
at the end of a configure run, and that commit changed to printing
the information from meson (which looks up the python version
itself). Remove the unused variable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-2-peter.maydell@linaro.org
This is working around current limitation of Meson's handling of
--disable-pie.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-19-alex.bennee@linaro.org>
Instead of using feature_not_found(), which is not a good match because
there is no "remedy" to fix the lack of makecontext(), just print a
custom error.
This happens to remove the last use of feature_not_found(), so remove
the definition and the documentation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
probe_target_compiler returns nonempty $target_cc for installed toolchains
and $container_cross_cc for container-based toolchains. In both cases
however the flags (coming from $cross_cc_cflags_${target_arch}) must be
in $target_cflags.
Therefore, do not clear them prior to returning from probe_target_compiler.
Reported-by: Taylor Simpson <tsimpson@quicinc.com>
Fixes: 92e288fcfb ("build: try both native and cross compilers", 2022-07-08)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When moving this code out of probe_target_compiler(), we failed to adjust
the variable in which the target is located, resulting in e.g.
powerpc64-linux-user-linux-gnu-gcc-10
Fixes: cd362defbb ("tests/tcg: merge configure.sh back into main configure script")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220728183901.1290113-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The '==' operator to test is a bashism; the standard way to copmare
strings is '='. This causes dash to complain:
../../configure: 681: test: linux: unexpected operator
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20220720152631.450903-6-peter.maydell@linaro.org
In commit 823eb01345 we moved the setting of ARCH from configure
to meson.build, but we accidentally left behind one attempt to use
$ARCH in configure, which was trying to add -msmall-data to the
compiler flags on Alpha hosts. Since ARCH is now never set, the test
always fails and we never add the flag.
There isn't actually any need to use this compiler flag on Alpha:
the original intent was that it would allow us to simplify our TCG
codegen on that platform, but we never actually made the TCG changes
that would rely on -msmall-data.
Drop the effectively-dead code from configure, as we don't need it.
This was spotted by shellcheck:
In ./configure line 2254:
case "$ARCH" in
^---^ SC2153: Possible misspelling: ARCH may not be assigned, but arch is.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20220720152631.450903-5-peter.maydell@linaro.org
The variable string-replacement syntax ${var/old/new} is a bashism
(though it is also supported by some other shells), and for instance
does not work with the NetBSD /bin/sh, which complains:
../src/configure: 687: Syntax error: Bad substitution
Replace it with a more portable sed-based approach, similar to
what we already do in quote_sh().
Note that shellcheck also diagnoses this:
In ./configure line 687:
e=${e/'\'/'\\'}
^-----------^ SC2039: In POSIX sh, string replacement is undefined.
^-- SC1003: Want to escape a single quote? echo 'This is how it'\''s done'.
^-- SC1003: Want to escape a single quote? echo 'This is how it'\''s done'.
In ./configure line 688:
e=${e/\"/'\"'}
^----------^ SC2039: In POSIX sh, string replacement is undefined.
Fixes: 8154f5e64b ("meson: Prefix each element of firmware path")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20220720152631.450903-4-peter.maydell@linaro.org
In shell script syntax, $var[something] is not special for variable
expansion: $var is expanded. However, as it can look as if it were
intended to be an array element access (the correct syntax for which
is ${var[something]}), shellcheck recommends using explicit braces
around ${var} to clarify the intended expansion.
This fixes the warning:
In ./configure line 2346:
if "$target_ld" -verbose 2>&1 | grep -q "^[[:space:]]*$emu[[:space:]]*$"; then
^-- SC1087: Use braces when expanding arrays, e.g. ${array[idx]} (or ${var}[.. to quiet).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20220720152631.450903-3-peter.maydell@linaro.org
In commit 7d7dbf9dc1 we added a line to the configure script
which is not valid POSIX shell syntax, because it is missing a space
after a '!' character. shellcheck diagnoses this:
if !(GIT="$git" "$source_path/scripts/git-submodule.sh" "$git_submodules_action" "$git_submodules"); then
^-- SC1035: You are missing a required space after the !.
and the OpenBSD shell will not correctly handle this without the space.
Fixes: 7d7dbf9dc1 ("configure: replace --enable/disable-git-update with --with-git-submodules")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20220720152631.450903-2-peter.maydell@linaro.org
Use the pre-packaged toolchain provided by Loongson via github.
Tested-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220704070824.965429-1-richard.henderson@linaro.org>
* pre-install data files in the build directory (Akihiko)
* SCSI fixes for Mac OS (Mark)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLO3bQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNv5AgAgGe8hGOcqJSzmFgeUJ7UEaauap6E
fF4zau8Xux7R6pnvPe2FeJ70AlvstFAUoU++7G3linQ+eqnFD7E18KQkfp9qX7jY
xDFPJRf6JNhwDjxQ2Tp0ShOcm5HkDv4Z4cPlx0T+wfKTlUWCzNEkhVrjOhpDYnSe
OldsdFjY0sUjZ1R/QNiuQ65aWwOr9gJ07KfakJQMX2YCMun6SO3kB/GtmyecTV3C
uNAUIdqJLsEbR1ckdMVVmixhtzMPW2R7/vjJkxG8RXUAcDmDHkuKPhWKyZ9a7/hh
CV8iMQMup6mgT8ndb5DWv551Y+C/rA1bH9U1NkaeQ9RP83CE4a6fpSMiiQ==
=82zT
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* SCSI fuzzing fix (Mauro)
* pre-install data files in the build directory (Akihiko)
* SCSI fixes for Mac OS (Mark)
# gpg: Signature made Wed 13 Jul 2022 15:59:00 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
pc-bios/s390-ccw: add -Wno-array-bounds
q800: add default vendor and product information for scsi-cd devices
q800: add default vendor and product information for scsi-hd devices
scsi-disk: allow MODE SELECT block descriptor to set the block size
scsi-disk: allow the MODE_PAGE_R_W_ERROR AWRE bit to be changeable for CDROM drives
q800: implement compat_props to enable quirk_mode_page_truncated for scsi-cd devices
scsi-disk: add SCSI_DISK_QUIRK_MODE_PAGE_TRUNCATED quirk for Macintosh
scsi-disk: add FORMAT UNIT command
q800: implement compat_props to enable quirk_mode_page_vendor_specific_apple for scsi devices
scsi-disk: add SCSI_DISK_QUIRK_MODE_PAGE_VENDOR_SPECIFIC_APPLE quirk for Macintosh
q800: implement compat_props to enable quirk_mode_sense_rom_use_dbd for scsi-cd devices
scsi-disk: add SCSI_DISK_QUIRK_MODE_SENSE_ROM_USE_DBD quirk for Macintosh
q800: implement compat_props to enable quirk_mode_page_apple_vendor for scsi-cd devices
scsi-disk: add MODE_PAGE_APPLE_VENDOR quirk for Macintosh
scsi-disk: add new quirks bitmap to SCSIDiskState
meson: Prefix each element of firmware path
module: Use bundle mechanism
datadir: Use bundle mechanism
cutils: Introduce bundle mechanism
scsi/lsi53c895a: really fix use-after-free in lsi_do_msgout (CVE-2022-0216)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220624154042.51512-1-akihiko.odaki@gmail.com>
[Rewrite shell function without using Bash extensions. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we don't need to emulate any target, we certainly don't need TCG.
This should also help to compile again with
".../configure --enable-tools --disable-system --disable-user"
on systems that do not have a TCG backend.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[thuth: Re-arranged the code, remove check-softfloat from buildtest.yml]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220706153816.768143-1-thuth@redhat.com>
Configure is trying to fall back on cross compilers for targets that
can have bi-arch or bi-endian toolchains, but there are many corner
cases where just checking the name can go wrong. For example, the RHEL
ppc64le compiler is bi-arch and bi-endian, but multilibs are disabled.
Therefore it cannot be used to build 32-bit hosted binaries like the
linux-user TCG tests.
Trying the cross compiler first also does not work, and an example for
this is also ppc64le. The powerpc64-linux-gnu-gcc binary from the
cross-gcc package is theoretically multilib-friendly, but it cannot
find the CRT files on a ppc64le host, because they are not in the .../le
multilib subdirectory.
This can be fixed by testing both the native compiler and the cross
compiler, and proceeding with the first one that works. To do this,
move the compiler usability check from the tests/tcg snippet to inside
probe_target_compiler and, while at it, restrict the softmmu emulation
target to basically a test for the presence of libgcc.
Tested-by: Matheus Kowalczuk Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let probe_target_compiler know if it is looking for a compiler for a
softmmu (freestanding) or a linux-user (hosted) environment. The
detection for the compiler has to be done differently in the two
cases.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add more pairs of bi-arch compilers, so that it is not necessary to have
e.g. both little-endian and big-endian ARM compilers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the flags passed to the configure script for the ppc cross compiler,
which in fact default to those that are needed to get the 32-bit ISA.
Add the endianness flag so that it remains possible to use a ppc64le
compiler to compile VOF.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU_CFLAGS is not available in pc-bios/s390-ccw/netboot.mak, but the Makefile
needs to access the flags passed to the configure script for the s390x
cross compiler. Fix everything and rename QEMU_CFLAGS to EXTRA_CFLAGS for
consistency with tests/tcg.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The optionrom build is disregarding the flags passed to the configure
script via --cross-cflags-i386. Pass it down and add it to the Makefile.
This will make it possible to get the -m32 flag from $target_cflags to
force a 32-bit build on 64-bit hosts, instead of supplying manually the
arcane -Wa,-32 and linker emulation options.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* virtio reset cleanups
* build system cleanups
* fix Cirrus CI
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKpooQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNlFwf+OugLGRZl3KVc7akQwUJe9gg2T31h
VkC+7Tei8FAwe8vDppVd+CYEIi0M3acxD2amRrv2etCCGSuySN1PbkfRcSfPBX01
pRWpasdhfqnZR8Iidi7YW1Ou5CcGqKH49nunBhW10+osb/mu5sVscMuOJgTDj/lK
CpsmDyk6572yGmczjNLlmhYcTU36clHpAZgazZHwk1PU+B3fCKlYYyvUpT3ItJvd
cK92aIUWrfofl3yTy0k4IwvZwNjTBirlstOIomZ333xzSA+mm5TR+mTvGRTZ69+a
v+snpMp4ILDMoB5kxQ42kK5WpdiN//LnriA9CBFDtOidsDDn8kx7gJe2RA==
=Dxwa
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* statistics subsystem
* virtio reset cleanups
* build system cleanups
* fix Cirrus CI
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKpooQUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNlFwf+OugLGRZl3KVc7akQwUJe9gg2T31h
# VkC+7Tei8FAwe8vDppVd+CYEIi0M3acxD2amRrv2etCCGSuySN1PbkfRcSfPBX01
# pRWpasdhfqnZR8Iidi7YW1Ou5CcGqKH49nunBhW10+osb/mu5sVscMuOJgTDj/lK
# CpsmDyk6572yGmczjNLlmhYcTU36clHpAZgazZHwk1PU+B3fCKlYYyvUpT3ItJvd
# cK92aIUWrfofl3yTy0k4IwvZwNjTBirlstOIomZ333xzSA+mm5TR+mTvGRTZ69+a
# v+snpMp4ILDMoB5kxQ42kK5WpdiN//LnriA9CBFDtOidsDDn8kx7gJe2RA==
# =Dxwa
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 15 Jun 2022 02:12:36 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (21 commits)
build: include pc-bios/ part in the ROMS variable
meson: put cross compiler info in a separate section
q35：Enable TSEG only when G_SMRAME and TSEG_EN both enabled
build: fix check for -fsanitize-coverage-allowlist
tests/vm: allow running tests in an unconfigured source tree
configure: cleanup -fno-pie detection
configure: update list of preserved environment variables
virtio-mmio: cleanup reset
virtio: stop ioeventfd on reset
virtio-mmio: stop ioeventfd on legacy reset
s390x: simplify virtio_ccw_reset_virtio
block: add more commands to preconfig mode
hmp: add filtering of statistics by name
qmp: add filtering of statistics by name
hmp: add filtering of statistics by provider
qmp: add filtering of statistics by provider
hmp: add basic "info stats" implementation
cutils: add functions for IEC and SI prefixes
qmp: add filtering of statistics by target vCPU
kvm: Support for querying fd-based stats
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
add the libvfio-user library as a submodule. build it as a meson
subproject.
libvfio-user is distributed with BSD 3-Clause license and
json-c with MIT (Expat) license
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: c2adec87958b081d1dc8775d4aa05c897912f025.1655151679.git.jag.raman@oracle.com
[Changed submodule URL to QEMU's libvfio-user mirror on GitLab. The QEMU
project mirrors its dependencies so that it can provide full source code
even in the event that its dependencies become unavailable. Note that
the mirror repo is manually updated, so please contact me to make newer
libvfio-user commits available. If I become a bottleneck we can set up a
cronjob.
Updated scripts/meson-buildoptions.sh to match the meson_options.txt
change. Failure to do so can result in scripts/meson-buildoptions.sh
being modified by the build system later on and you end up with a dirty
working tree.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Include the full path in TARGET_DIR, so that messages from sub-Makefiles
are clearer. Also, prepare for possibly building firmware outside
pc-bios/ from the Makefile,
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Place it only inside the 'if test "$pie" = "no"' conditional. Since
commit 43924d1e53 ("pc-bios/optionrom: detect -fno-pie", 2022-05-12),
the PIE options are detected independently by pc-bios/optionrom/Makefile,
and the CFLAGS_NOPIE/LDFLAGS_NOPIE variables are not used anymore.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The move from tests/tcg/configure.sh started enabling the container image
for xtensa-linux-user, which fails because the compiler does not have
the full set of headers. The cause is the "xtensa*-softmmu)" case
in tests/tcg/configure.sh which became just "xtensa*)" in the new
probe_target_compiler shell function. Look out for xtensa*-linux-user
and do not configure it.
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220608135727.1341946-1-pbonzini@redhat.com>
Fixes: cd362defbb ("tests/tcg: merge configure.sh back into main configure script")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220613171258.1905715-6-alex.bennee@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220606124333.2060567-44-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The only compiler variable that is still needed is $(CC), for
contrib/plugins/Makefile. All firmware builds have their own
config-host.mak file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-17-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-28-alex.bennee@linaro.org>
While container-based cross compilers are not supported, this already
makes it possible to build vof on any machine that has an installation
of GCC and binutils for 32- or 64-bit PowerPC.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-16-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-27-alex.bennee@linaro.org>
While container-based cross compilers are not supported, this already makes
it possible to build x86 optionroms on any machine that has an installation
of GCC and binutils for 32- or 64-bit x86.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-15-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-26-alex.bennee@linaro.org>
While container-based cross compilers are not supported, this already makes
it possible to build s390-ccw on any machine that has s390x GCC and binutils
installed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-14-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220527153603.887929-25-alex.bennee@linaro.org>
Ensure that the pc-bios/optionrom and pc-bios/s390-ccw directory
exist at the time when we'll write out the compiler configuration
for them.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-13-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-24-alex.bennee@linaro.org>
Firmware builds require paths to all the binutils; it is not enough to
use only cc, or even as/ld as in the case of tests/tcg/tricore.
Adjust the cross-compiler configurator to detect also ar, nm, objcopy,
ranlib and strip.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-12-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-23-alex.bennee@linaro.org>
Also in preparation for handling more binaries from the cross binutils,
support an option --cross-prefix-ARCH. All cross_cc_* defaults are
replaced with cross_prefix_*; the cross_cc_* fallbacks are extended
to the cross-compilation prefix, but the compiler fallbacks remain
as well. This way, for example, --cross-cc-arm=arm-linux-gnueabihf-clang
also applies to armeb binaries.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-11-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-22-alex.bennee@linaro.org>
In preparation for handling more binaries than just cc, handle
the case of "probe_target_compiler $cpu" directly in the function,
setting the target_* variables based on the ones that are used to
build QEMU. The clang check also needs to be moved after this
fallback.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517092616.1272238-10-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-21-alex.bennee@linaro.org>
The arm compiler can be used for armeb, and the sparc64 compiler
can be used for sparc.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517092616.1272238-9-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-20-alex.bennee@linaro.org>
tests/tcg/configure.sh has a complicated story.
In the beginning its code ran as part of the creation of config-target.mak
files, and that is where it placed the information on the target compiler.
However, probing for the buildability of TCG tests required multiple
inclusions of config-target.mak in the _main_ Makefile (not in
Makefile.target, which took care of building the QEMU executables in
the pre-Meson era), which polluted the namespace.
Thus, it was moved to a separate directory. It created small config-*.mak
files in $(BUILD_DIR)/tests/tcg. Those were also included multiple
times, but at least they were small and manageable; this was also an
important step in disentangling the TCG tests from Makefile.target.
Since then, Meson has allowed the configure script to go on a diet.
A few compilation tests survive (mostly for sanitizers) but these days
it mostly takes care of command line parsing, looking for tools, and
setting up the environment for Meson to do its stuff.
It's time to extend configure with the capability to build for more
than just one target: not just tests, but also firmware. As a first
step, integrate all the logic to find cross compilers in the configure
script, and move tests/tcg/configure.sh back there (though as a
separate loop, not integrated in the one that generates target
configurations for Meson).
tests/tcg is actually very close to being buildable as a standalone
project, so I actually expect the compiler tests to move back to
tests/tcg, as a "configure" script of sorts which would run at Make
time after the docker images are built. The GCC tree has a similar idea
of doing only bare-bones tree-wide configuration and leaving the rest
for Make time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517092616.1272238-8-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-19-alex.bennee@linaro.org>
This is useful because pc-bios/meson.build already has a list of all ROM
files, and thus does not need to use wildcards. The problems with
wildcards are mentioned above the definition of the LINKS variable,
but then the recommendation is disattended.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-6-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-17-alex.bennee@linaro.org>
Just hardcode $(CC) -E, it should be enough.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517092616.1272238-2-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-13-alex.bennee@linaro.org>
Use more conventional variables to set the location of pre-built
DLL/bin.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220525144140.591926-15-marcandre.lureau@redhat.com>
Now that we allow compiling with Capstone v3.0.5 again, all our supported
build hosts should provide at least this version of the disassembler
library, so we do not need to ship this as a submodule anymore.
Message-Id: <20220516145823.148450-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Our support statement for Windows currently talks about "Vista / Server
2008" - which is related to the API of Windows, and this is not easy
to understand for the non-technical users. Additionally, glib sets the
_WIN32_WINNT macro to 0x0601 already, which indicates the Windows 7 API,
so QEMU effectively depends on the Windows 7 API, too.
Thus let's bump the _WIN32_WINNT setting in QEMU to the same level as
glib uses and adjust our support statement in the documentation to
something similar that we're using for Linux and the *BSD systems
(i.e. only the two most recent versions), which should hopefully be
easier to understand for the users now.
And since we're nowadays also compile-testing QEMU with MSYS2 on Windows
itself, I think we could mention this build environment here, too.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/880
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20220513063958.1181443-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Do not rely on the detection that was done in the configure script,
since in the future we may want to cross-compile this file.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Finish the conversion by moving all the definitions and the constraint
checks to meson_options.txt and meson.build respectively.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vhost-user-fs is a device and it should be possible to enable/disable
it with --without-default-devices, not --without-default-features.
Compute its default value in Kconfig to obtain the more intuitive
behavior.
In this case the configure options were undocumented, too.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vhost-scsi and vhost-user-scsi are two devices of their own; it should
be possible to enable/disable them with --without-default-devices, not
--without-default-features. Compute their default value in Kconfig to
obtain the more intuitive behavior.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vhost-vsock and vhost-user-vsock are two devices of their own; it should
be possible to enable/disable them with --without-default-devices, not
--without-default-features. Compute their default value in Kconfig to
obtain the more intuitive behavior.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cleanup to ease review of the conversion to meson. vhost_net_user and
vhost_net_vdpa are never assigned anything in the command line parsing
loop, so they are always equal to $vhost_user and $vhost_vdpa.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This has no functional change, it only makes the command line shorter
and nicer.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If an option is not used anywhere by the configure script, it can be just
added to $meson_options even if it is not parsed by the automatically
generated bits in scripts/meson-buildoptions.sh.
The only slightly tricky case is $debug, where the
if test "$fortify_source" = "yes" ; then
QEMU_CFLAGS="-U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 $QEMU_CFLAGS"
debug=no
fi
assignment is dead; configure sets fortify_source=no whenever debug=yes.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While prefix, bindir and qemu_suffix needs special treatment due to
differences between Windows and POSIX systems, everything else
needs no extra code in configure.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is the last CONFIG_* entry in config-host.mak that had to be
special cased.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The hash is now generated with a Python script.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the new support for string option parsing.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the new support for string option parsing.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is quite a complicated check. I moved all the test programs to
a single file in scripts/, picking the right program with #if and a -D
flag in meson.build's cc.links() invocation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The mingw-w64-tool package in Fedora provides widl tool with a
cross prefix, so adds it automatically for cross builds.
WIDL env can be used to redefine the path to tool.
The same behavior as with windres.
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220428181525.300521-1-kkostiuk@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
$debug_info is not needed anywhere except in the final meson invocation,
no need to special case it.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no reason other than history (dating back to commit 1d728c3946, "tests: add gcov
support", 2013-01-06) for this, remove this unnecessary conditional.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The file has been removed in commit a8260d3876 ("ui: install logo icons to
$prefix/share/icons", 2019-01-21), do not try to symlink it in the build tree.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The .wxs file uses $(var.Mingw_bin) while configure/meson have always
used Mingw_dlls. Fix them to match what was probably intended.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
tcg_interpreter is never written, it is purely a meson option;
trace_backends is never read.
And SeaBIOS is only build from the source tree with roms/Makefile,
so the config.mak file is unused.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit c87ea11631 "configure: add --without-default-feature"
changed fortify_source from "yes" to "$default_feature". But there's
no option to turn it on, we only turn it off for debug build. I think
this should always be initialized to "yes" in the first place.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20220422100825.3692002-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not include variables for the QEMU's own compiler, as they
are not necessarily related to the cross compiler used for tests/tcg.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-16-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-19-alex.bennee@linaro.org>
(note: the test isn't working as intended, the next patches fixes it)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Filter unsupported Objective-C options, to avoid
'unknown-warning-option' warnings when using Clang:
[34/373] Compiling Objective-C object libcommon.fa.p/audio_coreaudio.m.o
warning: unknown warning option '-Wold-style-declaration'; did you mean '-Wout-of-line-declaration'? [-Wunknown-warning-option]
warning: unknown warning option '-Wimplicit-fallthrough=2'; did you mean '-Wimplicit-fallthrough'? [-Wunknown-warning-option]
2 warnings generated.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Tested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We can pass C/CPP/LD flags via CFLAGS/CXXFLAGS/LDFLAGS environment
variables, or via configure --extra-cflags / --extra-cxxflags /
--extra-ldflags options. Provide similar behavior for Objective C:
use existing flags from $OBJCFLAGS, or passed via --extra-objcflags.
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Tested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
vhost-user enabled on non-linux systems
beginning of nvme sriov support
bigger tx queue for vdpa
virtio iommu bypass
FADT flag to detect legacy keyboards
Fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmImipMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpD5AH/jz73VVDE3dZTtsdEH/f2tuO8uosur9fIjHJ
nCMwBoosdDWmrWjrwxynmG6e+qIcOHEGdTInvS1TY2OTU+elNNTiR57pWiljXRsJ
2kNIXKp4dXaYI/bxmKUzKSoVscyWxL686ND4U8sZhuppSNrWpLmMUNgwqmYjQQLV
yd2JpIKgZYnzShPnJMDtF3ItcCHetY6jeB28WAclKywIEuCTmjulYCTaH5ujroG9
rykMaQIjoe/isdmCcBx05UuMxH61vf5L8pR06N6e3GO9T2/Y/hWuteVoEJaCQvNa
+zIyL2hOjGuMKr+icLo9c42s3yfwWNsRfz87wqdAY47yYSyc1wo=
=3NVe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,pc,pci: features, cleanups, fixes
vhost-user enabled on non-linux systems
beginning of nvme sriov support
bigger tx queue for vdpa
virtio iommu bypass
FADT flag to detect legacy keyboards
Fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 07 Mar 2022 22:43:31 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (47 commits)
hw/acpi/microvm: turn on 8042 bit in FADT boot architecture flags if present
tests/acpi: i386: update FACP table differences
hw/acpi: add indication for i8042 in IA-PC boot flags of the FADT table
tests/acpi: i386: allow FACP acpi table changes
docs: vhost-user: add subsection for non-Linux platforms
configure, meson: allow enabling vhost-user on all POSIX systems
vhost: use wfd on functions setting vring call fd
event_notifier: add event_notifier_get_wfd()
pci: drop COMPAT_PROP_PCP for 2.0 machine types
hw/smbios: Add table 4 parameter, "processor-id"
x86: cleanup unused compat_apic_id_mode
vhost-vsock: detach the virqueue element in case of error
pc: add option to disable PS/2 mouse/keyboard
acpi: pcihp: pcie: set power on cap on parent slot
pci: expose TYPE_XIO3130_DOWNSTREAM name
pci: show id info when pci BDF conflict
hw/misc/pvpanic: Use standard headers instead
headers: Add pvpanic.h
pci-bridge/xio3130_downstream: Fix error handling
pci-bridge/xio3130_upstream: Fix error handling
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# docs/specs/index.rst
With the possibility of using a pipe pair via qemu_pipe() as a
replacement on operating systems that doesn't support eventfd,
vhost-user can also work on all POSIX systems.
This change allows enabling vhost-user on all non-Windows platforms
and makes libvhost_user (which still depends on eventfd) a linux-only
feature.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220304100854.14829-4-slp@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
GCC options pairs -mlittle/-mlittle-endian and -mbig/-mbig-endian are
equivalent on ppc64 architecture. However, Clang supports only long
version of the options.
Use longer form in configure to properly support both GCC and Clang
compiler. In addition, fix this issue in tcg test configure.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220131091714.4825-1-mrezanin@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
For the users, it looks a little bit weird that capstone and slirp are
not disabled automatically if they run the configure script with the
"--without-default-features" option, so let's do that now.
Note: fdt is *not* changed accordingly since this affects the targets
that we can build, so disabling fdt automatically here might have
unexpected side-effects for the users.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220221090647.150184-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
